Merge tag 'omap-for-v4.9/fixes-for-rc-cycle' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.9-rc cycle. Except for the omap3 fix for the SoC
features printed, all these are quite trivial and tiny. The omap5 jack
detection and gpadc patches are not strictly fixes, but I wanted to get
binding document typo fixed before it pops up on other boards. The
gpadc one liner was in the same series and I applied and pushed it out
already before noticing it could have waited. The list of changes is:

- Fix omap3 SoC features printed
- Make sure OMAP_INTERCONNECT is selected for am43xx only configurations
- Add missing memory node for torpedo
- Initialize uart4_mask properly to avoid writing garbage to PRM registers
- Fix NULL pointer dereference for omap4 volt_data
- Add alias for omap5 gpadc needed by iio drivers
- Enable omap5 jack headset jack detection and fix it's binding typo
- Add missing memory node for logicpd-som-lv
- Fix wrong SMPS6 voltage for VDD-DDR3 for omap5

* tag 'omap-for-v4.9/fixes-for-rc-cycle' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
  ARM: omap3: Add missing memory node in SOM-LV
  ASoC: omap-abe-twl6040: fix typo in bindings documentation
  dts: omap5: board-common: enable twl6040 headset jack detection
  dts: omap5: board-common: add phandle to reference Palmas gpadc
  ARM: OMAP2+: avoid NULL pointer dereference
  ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
  ARM: dts: omap3: Fix memory node in Torpedo board
  ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
  ARM: OMAP3: Fix formatting of features printed

Signed-off-by: Olof Johansson <olof@lixom.net>

8 files changed, 33 insertions, 11 deletions

diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
index fd40c852d7c7..462b04e8209f 100644
--- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -12,7 +12,7 @@ Required properties:
 
 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
-- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
   insertion, removal.
 
 Available audio endpoints for the audio-routing table:
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index 0ff1c2de95bf..26cce4d18405 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -13,6 +13,11 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	wl12xx_vmmc: wl12xx_vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
index 731ec37aed5b..8f9a69ca818c 100644
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -13,9 +13,9 @@
 		};
 	};
 
-	memory@0 {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x80000000 0>;
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index 6365635fea5c..4caadb253249 100644
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -124,6 +124,7 @@
 		compatible = "ti,abe-twl6040";
 		ti,model = "omap5-uevm";
 
+		ti,jack-detection;
 		ti,mclk-freq = <19200000>;
 
 		ti,mcpdm = <&mcpdm>;
@@ -415,7 +416,7 @@
 			ti,backup-battery-charge-high-current;
 		};
 
-		gpadc {
+		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
 			interrupts = <18 0
 				      16 0
@@ -475,8 +476,8 @@
 				smps6_reg: smps6 {
 					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index a9afeebd59f2..0465338183c7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -71,6 +71,7 @@ config SOC_AM43XX
 	select HAVE_ARM_TWD
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_775420
+	select OMAP_INTERCONNECT
 
 config SOC_DRA7XX
 	bool "TI DRA7XX"
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 2abd53ae3e7a..cc6d9fa60924 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void)
 
 #define OMAP3_SHOW_FEATURE(feat)		\
 	if (omap3_has_ ##feat())		\
-		printk(#feat" ");
+		n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
 
 static void __init omap3_cpuinfo(void)
 {
 	const char *cpu_name;
+	char buf[64];
+	int n = 0;
+
+	memset(buf, 0, sizeof(buf));
 
 	/*
 	 * OMAP3430 and OMAP3530 are assumed to be same.
@@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void)
 		cpu_name = "OMAP3503";
 	}
 
-	sprintf(soc_name, "%s", cpu_name);
+	scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
 
 	/* Print verbose information */
-	pr_info("%s %s (", soc_name, soc_rev);
+	n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
 
 	OMAP3_SHOW_FEATURE(l2cache);
 	OMAP3_SHOW_FEATURE(iva);
@@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void)
 	OMAP3_SHOW_FEATURE(neon);
 	OMAP3_SHOW_FEATURE(isp);
 	OMAP3_SHOW_FEATURE(192mhz_clk);
-
-	printk(")\n");
+	if (*(buf + n - 1) == ' ')
+		n--;
+	n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
+	pr_info("%s", buf);
 }
 
 #define OMAP3_CHECK_FEATURE(status,feat)				\
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 62680aad2126..718981bb80cd 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
 	if (has_uart4) {
 		en_uart4_mask = OMAP3630_EN_UART4_MASK;
 		grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
+	} else {
+		en_uart4_mask = 0;
+		grpsel_uart4_mask = 0;
 	}
 
 	/* Enable wakeups in PER */
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index cba8cada8c81..cd15dbd62671 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm,
 		return -ENODATA;
 	}
 
+	if (!voltdm->volt_data) {
+		pr_err("%s: No voltage data defined for vdd_%s\n",
+			__func__, voltdm->name);
+		return -ENODATA;
+	}
+
 	/* Adjust voltage to the exact voltage from the OPP table */
 	for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
 		if (voltdm->volt_data[i].volt_nominal >= target_volt) {