if ARCH_SA1100 menu "SA11x0 Implementations" config SA1100_ASSABET bool "Assabet" select ARM_SA1110_CPUFREQ select GPIO_REG select REGULATOR select REGULATOR_FIXED_VOLTAGE help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (also known as the Assabet). config ASSABET_NEPONSET bool "Include support for Neponset" depends on SA1100_ASSABET select SA1111 help Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 Microprocessor Development Board (Assabet) with the SA-1111 Development Board (Nepon). config SA1100_CERF bool "CerfBoard" select ARM_SA1110_CPUFREQ help The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). More information is available at: . Say Y if configuring for an Intrinsyc CerfBoard. Say N otherwise. choice prompt "Cerf Flash available" depends on SA1100_CERF default SA1100_CERF_FLASH_8MB config SA1100_CERF_FLASH_8MB bool "8MB" config SA1100_CERF_FLASH_16MB bool "16MB" config SA1100_CERF_FLASH_32MB bool "32MB" endchoice config SA1100_COLLIE bool "Sharp Zaurus SL5500" # FIXME: select ARM_SA11x0_CPUFREQ select SHARP_LOCOMO select SHARP_PARAM select SHARP_SCOOP help Say Y here to support the Sharp Zaurus SL5500 PDAs. config SA1100_H3100 bool "Compaq iPAQ H3100" select ARM_SA1110_CPUFREQ select HTC_EGPIO select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ H3100 handheld computer. config SA1100_H3600 bool "Compaq iPAQ H3600/H3700" select ARM_SA1110_CPUFREQ select HTC_EGPIO select MFD_IPAQ_MICRO help Say Y here if you intend to run this kernel on the Compaq iPAQ H3600 and H3700 handheld computers. config SA1100_BADGE4 bool "HP Labs BadgePAD 4" select ARM_SA1100_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Laboratories BadgePAD 4. config SA1100_JORNADA720 bool "HP Jornada 720" # FIXME: select ARM_SA11x0_CPUFREQ select SA1111 help Say Y here if you want to build a kernel for the HP Jornada 720 handheld computer. See config SA1100_JORNADA720_SSP bool "HP Jornada 720 Extended SSP driver" depends on SA1100_JORNADA720 select SA1100_SSP help Say Y here if you have a HP Jornada 7xx handheld computer and you want to access devices connected to the MCU. Those include the keyboard, touchscreen, backlight and battery. This driver also activates the generic SSP which it extends. config SA1100_HACKKIT bool "HackKit Core CPU Board" select ARM_SA1100_CPUFREQ help Say Y here to support the HackKit Core CPU Board ; config SA1100_LART bool "LART" select ARM_SA1100_CPUFREQ help Say Y here if you are using the Linux Advanced Radio Terminal (also known as the LART). See for information on the LART. config SA1100_NANOENGINE bool "nanoEngine" select ARM_SA1110_CPUFREQ select PCI select PCI_NANOENGINE help Say Y here if you are using the Bright Star Engineering nanoEngine. See for information on the BSE nanoEngine. config SA1100_PLEB bool "PLEB" select ARM_SA1100_CPUFREQ help Say Y here if you are using version 1 of the Portable Linux Embedded Board (also known as PLEB). See for more information. config SA1100_SHANNON bool "Shannon" select ARM_SA1100_CPUFREQ help The Shannon (also known as a Tuxscreen, and also as a IS2630) was a limited edition webphone produced by Philips. The Shannon is a SA1100 platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, and a telco interface. config SA1100_SIMPAD bool "Simpad" select ARM_SA1110_CPUFREQ help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same like CL4 in additional it has a PCMCIA-Slot. For more information visit or . config SA1100_SSP tristate "Generic PIO SSP" help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and other devices, eg for BadgePAD 4 sensor support. endmenu endif