| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Fix deadlock when removing MEMSTICK host
- Workaround broken CMDQ on Intel GLK based IRBIS models
* tag 'mmc-v5.9-rc4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS models
memstick: Skip allocating card when removing host
|
|
Since commit ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat
items") the write side of slab counters accepts a value in bytes and
converts it to pages. It happens in __mod_node_page_state().
However a non-SMP version of __mod_node_page_state() doesn't perform
this conversion. It leads to incorrect (unrealistically high) slab
counters values. Fix this by adding a similar conversion to the non-SMP
version of __mod_node_page_state().
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-and-tested-by: Bastian Bittorf <bb@npl.de>
Fixes: ea426c2a7de8 ("mm: memcg: prepare for byte-sized vmstat items")
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The pipe splice code still used the old model of waiting for pipe IO by
using a non-specific "pipe_wait()" that waited for any pipe event to
happen, which depended on all pipe IO being entirely serialized by the
pipe lock. So by checking the state you were waiting for, and then
adding yourself to the wait queue before dropping the lock, you were
guaranteed to see all the wakeups.
Strictly speaking, the actual wakeups were not done under the lock, but
the pipe_wait() model still worked, because since the waiter held the
lock when checking whether it should sleep, it would always see the
current state, and the wakeup was always done after updating the state.
However, commit 0ddad21d3e99 ("pipe: use exclusive waits when reading or
writing") split the single wait-queue into two, and in the process also
made the "wait for event" code wait for _two_ wait queues, and that then
showed a race with the wakers that were not serialized by the pipe lock.
It's only splice that used that "pipe_wait()" model, so the problem
wasn't obvious, but Josef Bacik reports:
"I hit a hang with fstest btrfs/187, which does a btrfs send into
/dev/null. This works by creating a pipe, the write side is given to
the kernel to write into, and the read side is handed to a thread that
splices into a file, in this case /dev/null.
The box that was hung had the write side stuck here [pipe_write] and
the read side stuck here [splice_from_pipe_next -> pipe_wait].
[ more details about pipe_wait() scenario ]
The problem is we're doing the prepare_to_wait, which sets our state
each time, however we can be woken up either with reads or writes. In
the case above we race with the WRITER waking us up, and re-set our
state to INTERRUPTIBLE, and thus never break out of schedule"
Josef had a patch that avoided the issue in pipe_wait() by just making
it set the state only once, but the deeper problem is that pipe_wait()
depends on a level of synchonization by the pipe mutex that it really
shouldn't. And the whole "wait for any pipe state change" model really
isn't very good to begin with.
So rather than trying to work around things in pipe_wait(), remove that
legacy model of "wait for arbitrary pipe event" entirely, and actually
create functions that wait for the pipe actually being readable or
writable, and can do so without depending on the pipe lock serializing
everything.
Fixes: 0ddad21d3e99 ("pipe: use exclusive waits when reading or writing")
Link: https://lore.kernel.org/linux-fsdevel/bfa88b5ad6f069b2b679316b9e495a970130416c.1601567868.git.josef@toxicpanda.com/
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"A previous commit to prevent AML memory opregions from accessing the
kernel memory turned out to be too restrictive. Relax the permission
check to permit the ACPI core to map kernel memory used for table
overrides"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: permit ACPI core to map kernel memory used for table overrides
|
|
Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.
Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.
Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes: 325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- NFSv4.2: copy_file_range needs to invalidate caches on success
- NFSv4.2: Fix security label length not being reset
- pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly
on read
- pNFS/flexfiles: Fix signed/unsigned type issues with mirror
indices"
* tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Be consistent about mirror index types
pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
NFSv4.2: fix client's attribute cache management for copy_file_range
nfs: Fix security label length not being reset
|
|
After commit 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power
management"), removing module rtsx_usb_ms will be stuck.
The deadlock is caused by powering on and powering off at the same time,
the former one is when memstick_check() is flushed, and the later is called
by memstick_remove_host().
Soe let's skip allocating card to prevent this issue.
Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200925084952.13220-1-kai.heng.feng@canonical.com
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
This prepares for the future work to trigger early cow on pinned pages
during fork().
No functional change intended.
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
(Commit message majorly collected from Jason Gunthorpe)
Reduce the chance of false positive from page_maybe_dma_pinned() by
keeping track if the mm_struct has ever been used with pin_user_pages().
This allows cases that might drive up the page ref_count to avoid any
penalty from handling dma_pinned pages.
Future work is planned, to provide a more sophisticated solution, likely
to turn it into a real counter. For now, make it atomic_t but use it as
a boolean for simplicity.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes: one in drivers (lpfc) and two for zoned block devices.
The latter also impinges on the block layer but only to introduce a
new block API for setting the zone model rather than fiddling with the
queue directly in the zoned block driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: sd_zbc: Fix ZBC disk initialization
scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported
|
|
Pull block fixes from Jens Axboe:
"NVMe pull request from Christoph, and removal of a dead define.
- fix error during controller probe that cause double free irqs
(Keith Busch)
- FC connection establishment fix (James Smart)
- properly handle completions for invalid tags (Xianting Tian)
- pass the correct nsid to the command effects and supported log
(Chaitanya Kulkarni)"
* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
block: remove unused BLK_QC_T_EAGAIN flag
nvme-core: don't use NVME_NSID_ALL for command effects and supported log
nvme-fc: fail new connections to a deleted host or remote port
nvme-pci: fix NULL req in completion handler
nvme: return errors for hwmon init
|
|
In register_mem_sect_under_node() the system_state's value is checked to
detect whether the call is made during boot time or during an hot-plug
operation. Unfortunately, that check against SYSTEM_BOOTING is wrong
because regular memory is registered at SYSTEM_SCHEDULING state. In
addition, memory hot-plug operation can be triggered at this system
state by the ACPI [1]. So checking against the system state is not
enough.
The consequence is that on system with interleaved node's ranges like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
This can be seen on PowerPC LPAR after multiple memory hot-plug and
hot-unplug operations are done. At the next reboot the node's memory
ranges can be interleaved and since the call to link_mem_sections() is
made in topology_init() while the system is in the SYSTEM_SCHEDULING
state, the node's id is not checked, and the sections registered to
multiple nodes:
$ ls -l /sys/devices/system/memory/memory21/node*
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
In that case, the system is able to boot but if later one of theses
memory blocks is hot-unplugged and then hot-plugged, the sysfs
inconsistency is detected and this is triggering a BUG_ON():
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This patch addresses the root cause by not relying on the system_state
value to detect whether the call is due to a hot-plug operation. An
extra parameter is added to link_mem_sections() detailing whether the
operation is due to a hot-plug operation.
[1] According to Oscar Salvador, using this qemu command line, ACPI
memory hotplug operations are raised at SYSTEM_SCHEDULING state:
$QEMU -enable-kvm -machine pc -smp 4,sockets=4,cores=1,threads=1 -cpu host -monitor pty \
-m size=$MEM,slots=255,maxmem=4294967296k \
-numa node,nodeid=0,cpus=0-3,mem=512 -numa node,nodeid=1,mem=512 \
-object memory-backend-ram,id=memdimm0,size=134217728 -device pc-dimm,node=0,memdev=memdimm0,id=dimm0,slot=0 \
-object memory-backend-ram,id=memdimm1,size=134217728 -device pc-dimm,node=0,memdev=memdimm1,id=dimm1,slot=1 \
-object memory-backend-ram,id=memdimm2,size=134217728 -device pc-dimm,node=0,memdev=memdimm2,id=dimm2,slot=2 \
-object memory-backend-ram,id=memdimm3,size=134217728 -device pc-dimm,node=0,memdev=memdimm3,id=dimm3,slot=3 \
-object memory-backend-ram,id=memdimm4,size=134217728 -device pc-dimm,node=1,memdev=memdimm4,id=dimm4,slot=4 \
-object memory-backend-ram,id=memdimm5,size=134217728 -device pc-dimm,node=1,memdev=memdimm5,id=dimm5,slot=5 \
-object memory-backend-ram,id=memdimm6,size=134217728 -device pc-dimm,node=1,memdev=memdimm6,id=dimm6,slot=6 \
Fixes: 4fbce633910e ("mm/memory_hotplug.c: make register_mem_sect_under_node() a callback of walk_memory_range()")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-3-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: fix memory to node bad links in sysfs", v3.
Sometimes, firmware may expose interleaved memory layout like this:
Early memory node ranges
node 1: [mem 0x0000000000000000-0x000000011fffffff]
node 2: [mem 0x0000000120000000-0x000000014fffffff]
node 1: [mem 0x0000000150000000-0x00000001ffffffff]
node 0: [mem 0x0000000200000000-0x000000048fffffff]
node 2: [mem 0x0000000490000000-0x00000007ffffffff]
In that case, we can see memory blocks assigned to multiple nodes in
sysfs:
$ ls -l /sys/devices/system/memory/memory21
total 0
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node1 -> ../../node/node1
lrwxrwxrwx 1 root root 0 Aug 24 05:27 node2 -> ../../node/node2
-rw-r--r-- 1 root root 65536 Aug 24 05:27 online
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_device
-r--r--r-- 1 root root 65536 Aug 24 05:27 phys_index
drwxr-xr-x 2 root root 0 Aug 24 05:27 power
-r--r--r-- 1 root root 65536 Aug 24 05:27 removable
-rw-r--r-- 1 root root 65536 Aug 24 05:27 state
lrwxrwxrwx 1 root root 0 Aug 24 05:25 subsystem -> ../../../../bus/memory
-rw-r--r-- 1 root root 65536 Aug 24 05:25 uevent
-r--r--r-- 1 root root 65536 Aug 24 05:27 valid_zones
The same applies in the node's directory with a memory21 link in both
the node1 and node2's directory.
This is wrong but doesn't prevent the system to run. However when
later, one of these memory blocks is hot-unplugged and then hot-plugged,
the system is detecting an inconsistency in the sysfs layout and a
BUG_ON() is raised:
kernel BUG at /Users/laurent/src/linux-ppc/mm/memory_hotplug.c:1084!
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: rpadlpar_io rpaphp pseries_rng rng_core vmx_crypto gf128mul binfmt_misc ip_tables x_tables xfs libcrc32c crc32c_vpmsum autofs4
CPU: 8 PID: 10256 Comm: drmgr Not tainted 5.9.0-rc1+ #25
Call Trace:
add_memory_resource+0x23c/0x340 (unreliable)
__add_memory+0x5c/0xf0
dlpar_add_lmb+0x1b4/0x500
dlpar_memory+0x1f8/0xb80
handle_dlpar_errorlog+0xc0/0x190
dlpar_store+0x198/0x4a0
kobj_attr_store+0x30/0x50
sysfs_kf_write+0x64/0x90
kernfs_fop_write+0x1b0/0x290
vfs_write+0xe8/0x290
ksys_write+0xdc/0x130
system_call_exception+0x160/0x270
system_call_common+0xf0/0x27c
This has been seen on PowerPC LPAR.
The root cause of this issue is that when node's memory is registered,
the range used can overlap another node's range, thus the memory block
is registered to multiple nodes in sysfs.
There are two issues here:
(a) The sysfs memory and node's layouts are broken due to these
multiple links
(b) The link errors in link_mem_sections() should not lead to a system
panic.
To address (a) register_mem_sect_under_node should not rely on the
system state to detect whether the link operation is triggered by a hot
plug operation or not. This is addressed by the patches 1 and 2 of this
series.
Issue (b) will be addressed separately.
This patch (of 2):
The memmap_context enum is used to detect whether a memory operation is
due to a hot-add operation or happening at boot time.
Make it general to the hotplug operation and rename it as
meminit_context.
There is no functional change introduced by this patch
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J . Wysocki" <rafael@kernel.org>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: Scott Cheloha <cheloha@linux.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200915094143.79181-1-ldufour@linux.ibm.com
Link: https://lkml.kernel.org/r/20200915132624.9723-1-ldufour@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently to make sure that every page table entry is read just once
gup_fast walks perform READ_ONCE and pass pXd value down to the next
gup_pXd_range function by value e.g.:
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
...
pudp = pud_offset(&p4d, addr);
This function passes a reference on that local value copy to pXd_offset,
and might get the very same pointer in return. This happens when the
level is folded (on most arches), and that pointer should not be
iterated.
On s390 due to the fact that each task might have different 5,4 or
3-level address translation and hence different levels folded the logic
is more complex and non-iteratable pointer to a local copy leads to
severe problems.
Here is an example of what happens with gup_fast on s390, for a task
with 3-level paging, crossing a 2 GB pud boundary:
// addr = 0x1007ffff000, end = 0x10080001000
static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end,
unsigned int flags, struct page **pages, int *nr)
{
unsigned long next;
pud_t *pudp;
// pud_offset returns &p4d itself (a pointer to a value on stack)
pudp = pud_offset(&p4d, addr);
do {
// on second iteratation reading "random" stack value
pud_t pud = READ_ONCE(*pudp);
// next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390
next = pud_addr_end(addr, end);
...
} while (pudp++, addr = next, addr != end); // pudp++ iterating over stack
return 1;
}
This happens since s390 moved to common gup code with commit
d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and
commit 1a42010cdc26 ("s390/mm: convert to the generic
get_user_pages_fast code").
s390 tried to mimic static level folding by changing pXd_offset
primitives to always calculate top level page table offset in pgd_offset
and just return the value passed when pXd_offset has to act as folded.
What is crucial for gup_fast and what has been overlooked is that
PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly.
And the latter is not possible with dynamic folding.
To fix the issue in addition to pXd values pass original pXdp pointers
down to gup_pXd_range functions. And introduce pXd_offset_lockless
helpers, which take an additional pXd entry value parameter. This has
already been discussed in
https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1
Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.2+]
Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
commit 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE") removed the
REQ_NOWAIT_INLINE related code, but the diff wasn't applied to
blk_types.h somehow.
Then commit 2771cefeac49 ("block: remove the REQ_NOWAIT_INLINE flag")
removed the REQ_NOWAIT_INLINE flag while the BLK_QC_T_EAGAIN flag still
remains.
Fixes: 7b6620d7db56 ("block: remove REQ_NOWAIT_INLINE")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression at the CEC adapter core
- two uAPI patches (one revert) for changes in this development cycle
* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dt-bindings: media: imx274: Convert to json-schema
media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
media: cec-adap.c: don't use flush_scheduled_work()
|
|
Pull vfs fixes from Al Viro:
"No common topic, just assorted fixes"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fuse: fix the ->direct_IO() treatment of iov_iter
fs: fix cast in fsparam_u32hex() macro
vboxsf: Fix the check for the old binary mount-arguments struct
|
|
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check kprobe is enabled before unregistering from ftrace as it isn't
registered when disabled.
- Remove kprobes enabled via command-line that is on init text when
freed.
- Add missing RCU synchronization for ftrace trampoline symbols removed
from kallsyms.
- Free trampoline on error path if ftrace_startup() fails.
- Give more space for the longer PID numbers in trace output.
- Fix a possible double free in the histogram code.
- A couple of fixes that were discovered by sparse.
* tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: init: make xbc_namebuf static
kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot
tracing: fix double free
ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer
tracing: Make the space reserved for the pid wider
ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms
ftrace: Free the trampoline when ftrace_startup() fails
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
|
|
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy
implementation should be defined only in !CONFIG_DAX case, not in
!CONFIG_FS_DAX case.
Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support")
Cc: <stable@vger.kernel.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
"Two fixes from the locking/urgent pile:
- Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter
Zijlstra)
- Make percpu-rwsem operations on the semaphore's ->read_count
IRQ-safe because it can be used in an IRQ context (Hou Tao)"
* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
locking/lockdep: Fix "USED" <- "IN-NMI" inversions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
"A handful of fixes to address a string of mistakes in the mechanism
for device-mapper to determine if its component devices are dax
capable.
- Fix an original bug in device-mapper table reference counting when
interrogating dax capability in the component device. This bug was
hidden by the following bug.
- Fix device-mapper to use the proper helper (dax_supported() instead
of the leaf helper generic_fsdax_supported()) to determine dax
operation of a stacked block device configuration. The original
implementation is only valid for one level of dax-capable block
device stacking. This bug was discovered while fixing the below
regression.
- Fix an infinite recursion regression introduced by broken attempts
to quiet the generic_fsdax_supported() path and make it bail out
before logging "dax capability not found" errors"
* tag 'libnvdimm-fixes-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix stack overflow when mounting fsdax pmem device
dm: Call proper helper to determine dax support
dm/dax: Fix table reference counts
|
|
When calculating ancestor_size with IPv6 enabled, simply using
sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for
alignment in the struct sctp6_sock. On x86, there aren't any extra
bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte
boundary so there were 4 pad bytes that were omitted from the
ancestor_size calculation. This would lead to corruption of the
pd_lobby pointers, causing an oops when trying to free the sctp
structure on socket close.
Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant")
Signed-off-by: Henry Ptasinski <hptasinski@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial/fbcon fixes from Greg KH:
"Here are some small tty/serial and one more fbcon fix.
They include:
- serial core locking regression fixes
- new device ids for 8250_pci driver
- fbcon fix for syzbot found issue
All have been in linux-next with no reported issues"
* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fbcon: Fix user font detection test at fbcon_resize().
serial: 8250_pci: Add Realtek 816a and 816b
serial: core: fix console port-lock regression
serial: core: fix port-lock initialisation
|
|
DM was calling generic_fsdax_supported() to determine whether a device
referenced in the DM table supports DAX. However this is a helper for "leaf" device drivers so that
they don't have to duplicate common generic checks. High level code
should call dax_supported() helper which that calls into appropriate
helper for the particular device. This problem manifested itself as
kernel messages:
dm-3: error: dax access failed (-95)
when lvm2-testsuite run in cases where a DM device was stacked on top of
another DM device.
Fixes: 7bf7eac8d648 ("dax: Arrange for dax_supported check to span multiple devices")
Cc: <stable@vger.kernel.org>
Tested-by: Adrian Huang <ahuang12@lenovo.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/160061715195.13131.5503173247632041975.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of stack_erasing_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces)
kernel/stackleak.c:31:50: expected void *
kernel/stackleak.c:31:50: got void [noderef] __user *buffer
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently mscc_ocelot_init_ports() will skip initializing a port when it
doesn't have a phy-handle, so the ocelot->ports[port] pointer will be
NULL. Take this into consideration when tearing down the driver, and add
a new function ocelot_deinit_port() to the switch library, mirror of
ocelot_init_port(), which needs to be called by the driver for all ports
it has initialized.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot_port->ts_id is used to:
(a) populate skb->cb[0] for matching the TX timestamp in the PTP IRQ
with an skb.
(b) populate the REW_OP from the injection header of the ongoing skb.
Only then is ocelot_port->ts_id incremented.
This is a problem because, at least theoretically, another timestampable
skb might use the same ocelot_port->ts_id before that is incremented.
Normally all transmit calls are serialized by the netdev transmit
spinlock, but in this case, ocelot_port_add_txtstamp_skb() is also
called by DSA, which has started declaring the NETIF_F_LLTX feature
since commit 2b86cb829976 ("net: dsa: declare lockless TX feature for
slave ports"). So the logic of using and incrementing the timestamp id
should be atomic per port.
The solution is to use the global ocelot_port->ts_id only while
protected by the associated ocelot_port->ts_id_lock. That's where we
populate skb->cb[0]. Note that for ocelot, ocelot_port_add_txtstamp_skb
is called for the actual skb, but for felix, it is called for the skb's
clone. That is something which will also be changed in the future.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow CPUs affected by erratum 1418040 to come online late
(previously we only fixed the other case - CPUs not affected by the
erratum coming up late).
- Fix branch offset in BPF JIT.
- Defer the stolen time initialisation to the CPU online time from the
CPU starting time to avoid a (sleep-able) memory allocation in an
atomic context.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: paravirt: Initialize steal time when cpu is online
arm64: bpf: Fix branch offset in JIT
arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here is a collection of fixes for 5.9. All look small and are nothing
scary.
The majority of changes are about ASoC driver- specific fixes, while
there are a couple of ASoC core fixes (DAI lookup and lockdep stuff)
and usual HD-audio quirks"
* tag 'sound-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek - The Mic on a RedmiBook doesn't work
ASoC: tlv320adcx140: Wake up codec before accessing register
ASoC: core: Do not cleanup uninitialized dais on soc_pcm_open failure
ALSA: hda: fixup headset for ASUS GX502 laptop
ASoC: Intel: bytcr_rt5640: Add quirk for MPMAN Converter9 2-in-1
ASoC: Intel: haswell: Fix power transition refactor
ASoC: tlv320adcx140: Fix accessing uninitialized adcx140->dev
ASoC: wm8994: Ensure the device is resumed in wm89xx_mic_detect functions
ASoC: wm8994: Skip setting of the WM8994_MICBIAS register for WM1811
ASoC: meson: axg-toddr: fix channel order on g12 platforms
ASoC: soc-core: add snd_soc_find_dai_with_mutex()
ASoC: qcom: common: Fix refcount imbalance on error
ASoC: rt700: Fix return check for devm_regmap_init_sdw()
ASoC: rt715: Fix return check for devm_regmap_init_sdw()
ASoC: rt711: Fix return check for devm_regmap_init_sdw()
ASoC: rt1308-sdw: Fix return check for devm_regmap_init_sdw()
ASoC: max98373: Fix return check for devm_regmap_init_sdw()
ASoC: ti: fixup ams_delta_mute() function name
ASoC: pcm3168a: ignore 0 Hz settings
ASoC: Intel: tgl_max98373: fix a runtime pm issue in multi-thread case
...
|
|
Since kprobe_event= cmdline option allows user to put kprobes on the
functions in initmem, kprobe has to make such probes gone after boot.
Currently the probes on the init functions in modules will be handled
by module callback, but the kernel init text isn't handled.
Without this, kprobes may access non-exist text area to disable or
remove it.
Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2
Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
A mirror index is always of type u32.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Tunnel offload info code uses ETHTOOL_MSG_TUNNEL_INFO_GET message type (cmd
field in genetlink header) for replies to tunnel info netlink request, i.e.
the same value as the request have. This is a problem because we are using
two separate enums for userspace to kernel and kernel to userspace message
types so that this ETHTOOL_MSG_TUNNEL_INFO_GET (28) collides with
ETHTOOL_MSG_CABLE_TEST_TDR_NTF which is what message type 28 means for
kernel to userspace messages.
As the tunnel info request reached mainline in 5.9 merge window, we should
still be able to fix the reply message type without breaking backward
compatibility.
Fixes: c7d759eb7b12 ("ethtool: add tunnel info interface")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made
the page locking entirely fair, in that if a waiter came in while the
lock was held, the lock would be transferred to the lockers strictly in
order.
That was intended to finally get rid of the long-reported watchdog
failures that involved the page lock under extreme load, where a process
could end up waiting essentially forever, as other page lockers stole
the lock from under it.
It also improved some benchmarks, but it ended up causing huge
performance regressions on others, simply because fair lock behavior
doesn't end up giving out the lock as aggressively, causing better
worst-case latency, but potentially much worse average latencies and
throughput.
Instead of reverting that change entirely, this introduces a controlled
amount of unfairness, with a sysctl knob to tune it if somebody needs
to. But the default value should hopefully be good for any normal load,
allowing a few rounds of lock stealing, but enforcing the strict
ordering before the lock has been stolen too many times.
There is also a hint from Matthieu Baerts that the fair page coloring
may end up exposing an ABBA deadlock that is hidden by the usual
optimistic lock stealing, and while the unfairness doesn't fix the
fundamental issue (and I'm still looking at that), it avoids it in
practice.
The amount of unfairness can be modified by writing a new value to the
'sysctl_page_lock_unfairness' variable (default value of 5, exposed
through /proc/sys/vm/page_lock_unfairness), but that is hopefully
something we'd use mainly for debugging rather than being necessary for
any deep system tuning.
This whole issue has exposed just how critical the page lock can be, and
how contended it gets under certain locks. And the main contention
doesn't really seem to be anything related to IO (which was the origin
of this lock), but for things like just verifying that the page file
mapping is stable while faulting in the page into a page table.
Link: https://lore.kernel.org/linux-fsdevel/ed8442fd-6f54-dd84-cd4a-941e8b7ee603@MichaelLarabel.com/
Link: https://www.phoronix.com/scan.php?page=article&item=linux-50-59&num=1
Link: https://lore.kernel.org/linux-fsdevel/c560a38d-8313-51fb-b1ec-e904bd8836bc@tessares.net/
Reported-and-tested-by: Michael Larabel <Michael@michaellarabel.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Steal time initialization requires mapping a memory region which
invokes a memory allocation. Doing this at CPU starting time results
in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
BUG: sleeping function called from invalid context at mm/slab.h:498
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0-rc5+ #1
Call trace:
dump_backtrace+0x0/0x208
show_stack+0x1c/0x28
dump_stack+0xc4/0x11c
___might_sleep+0xf8/0x130
__might_sleep+0x58/0x90
slab_pre_alloc_hook.constprop.101+0xd0/0x118
kmem_cache_alloc_node_trace+0x84/0x270
__get_vm_area_node+0x88/0x210
get_vm_area_caller+0x38/0x40
__ioremap_caller+0x70/0xf8
ioremap_cache+0x78/0xb0
memremap+0x9c/0x1a8
init_stolen_time_cpu+0x54/0xf0
cpuhp_invoke_callback+0xa8/0x720
notify_cpu_starting+0xc8/0xd8
secondary_start_kernel+0x114/0x180
CPU1: Booted secondary processor 0x0000000001 [0x431f0a11]
However we don't need to initialize steal time at CPU starting time.
We can simply wait until CPU online time, just sacrificing a bit of
accuracy by returning zero for steal time until we know better.
While at it, add __init to the functions that are only called by
pv_time_init() which is __init.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Some drivers have to do significant work, some of which relies on RCU
still being active. Instead of using RCU_NONIDLE in the drivers and
flipping RCU back on, allow drivers to take over RCU-idle duty.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given
that percpu-rwsem is a blocking primitive, should be just fine.
However, file_end_write() is used from IRQ context and will cause
load-store issues on architectures where the per-cpu accessors are not
natively irq-safe.
Fix it by using the IRQ-safe this_cpu_*() for operations on
read_count. This will generate more expensive code on a number of
platforms, which might cause a performance regression for some of the
other percpu-rwsem users.
If any such is reported, we can consider alternative solutions.
Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
|
|
Fix the port-lock initialisation regression introduced by commit
a3cb39d258ef ("serial: core: Allow detach and attach serial device for
console") by making sure that the lock is again initialised during
console setup.
The console may be registered before the serial controller has been
probed in which case the port lock needs to be initialised during
console setup by a call to uart_set_options(). The console-detach
changes introduced a regression in several drivers by effectively
removing that initialisation by not initialising the lock when the port
is used as a console (which is always the case during console setup).
Add back the early lock initialisation and instead use a new
console-reinit flag to handle the case where a console is being
re-attached through sysfs.
The question whether the console-detach interface should have been added
in the first place is left for another discussion.
Note that the console-enabled check in uart_set_options() is not
redundant because of kgdboc, which can end up reinitialising an already
enabled console (see commit 42b6a1baa3ec ("serial_core: Don't
re-initialize a previously initialized spinlock.")).
Fixes: a3cb39d258ef ("serial: core: Allow detach and attach serial device for console")
Cc: stable <stable@vger.kernel.org> # 5.7
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200909143101.15389-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as
regular disks. In this case, ensure that command completion is correctly
executed by changing sd_zbc_complete() to return good_bytes instead of 0
and causing a hang during device probe (endless retries).
When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to
have partitions, it will be used as a regular disk. In this case, make sure
to not do anything in sd_zbc_revalidate_zones() as that triggers warnings.
Since all these different cases result in subtle settings of the disk queue
zoned model, introduce the block layer helper function
blk_queue_set_zoned() to generically implement setting up the effective
zoned model according to the disk type, the presence of partitions on the
disk and CONFIG_BLK_DEV_ZONED configuration.
Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lemoal@wdc.com
Fixes: b72053072c0b ("block: allow partitions on host aware zone devices")
Cc: <stable@vger.kernel.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So we'd better do the mask when set it in act_tunnel_key and cls_flower.
Otherwise, when users don't know these bits, they may configure with a
value which can never be matched.
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
flowi4_multipath_hash was added by the commit referenced below for
tunnels. Unfortunately, the patch did not initialize the new field
for several fast path lookups that do not initialize the entire flow
struct to 0. Fix those locations. Currently, flowi4_multipath_hash
is random garbage and affects the hash value computed by
fib_multipath_hash for multipath selection.
Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch partially reverts some of the UAPI bits of the buffer
cache management hints. Namely, the queue consistency (memory
coherency) user-space hint because, as it turned out, the kernel
implementation of this feature was misusing DMA_ATTR_NON_CONSISTENT.
The patch reverts both kernel and user space parts: removes the
DMA consistency attr functions, rolls back changes to v4l2_requestbuffers,
v4l2_create_buffers structures and corresponding UAPI functions
(plus compat32 layer) and cleans up the documentation.
[hverkuil: fixed a few typos in the commit log]
[hverkuil: fixed vb2_core_reqbufs call in drivers/media/dvb-core/dvb_vb2.c]
[mchehab: fixed a typo in the commit log: revers->reverts]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
test_firmware: Test platform fw loading on non-EFI systems
PM: <linux/device.h>: fix @em_pd kernel-doc warning
kobject: Drop unneeded conditional in __kobject_del()
driver core: Fix device_pm_lock() locking for device links
MAINTAINERS: Add the security document to SECURITY CONTACT
driver code: print symbolic error code
debugfs: Fix module state check condition
kobject: Restore old behaviour of kobject_del(NULL)
firmware_loader: fix memory leak for paged buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it all up
to a sane state.
- phy driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "dyndbg: accept query terms like file=bar and module=foo"
Revert "dyndbg: fix problem parsing format="foo bar""
scripts/tags.sh: exclude tools directory from tags generation
video: fbdev: fix OOB read in vga_8planes_imageblit()
dyndbg: fix problem parsing format="foo bar"
dyndbg: refine export, rename to dynamic_debug_exec_queries()
dyndbg: give %3u width in pr-format, cosmetic only
interconnect: qcom: Fix small BW votes being truncated to zero
soundwire: fix double free of dangling pointer
interconnect: Show bandwidth for disabled paths as zero in debugfs
habanalabs: fix report of RAZWI initiator coordinates
habanalabs: prevent user buff overflow
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
soundwire: bus: fix typo in comment on INTSTAT registers
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
|
|
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Usual driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: algo: pca: Reapply i2c bus settings after reset
i2c: npcm7xx: Fix timeout calculation
misc: eeprom: at24: register nvmem only after eeprom is ready to use
|
