summaryrefslogtreecommitdiff
path: root/include/linux/tty.h
AgeCommit message (Collapse)AuthorFilesLines
2016-05-20Merge tag 'tty-4.7-rc1' of ↵Linus Torvalds1-3/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here's the large TTY and Serial driver update for 4.7-rc1. A few new serial drivers are added here, and Peter has fixed a bunch of long-standing bugs in the tty layer and serial drivers as normal. Full details in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits) MAINTAINERS: 8250: remove website reference serial: core: Fix port mutex assert if lockdep disabled serial: 8250_dw: fix wrong logic in dw8250_check_lcr() tty: vt, finish looping on duplicate tty: vt, return error when con_startup fails QE-UART: add "fsl,t1040-ucc-uart" to of_device_id serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios serial: 8250dw: Add device HID for future AMD UART controller Fix OpenSSH pty regression on close serial: mctrl_gpio: add IRQ locking serial: 8250: Integrate Fintek into 8250_base serial: mps2-uart: add support for early console serial: mps2-uart: add MPS2 UART driver dt-bindings: document the MPS2 UART bindings serial: sirf: Use generic uart-has-rtscts DT property serial: sirf: Introduce helper variable struct device_node *np serial: mxs-auart: Use generic uart-has-rtscts DT property serial: imx: Use generic uart-has-rtscts DT property doc: DT: Add Generic Serial Device Tree Bindings serial: 8250: of: Make tegra_serial_handle_break() static ...
2016-05-18Merge branch 'stable-4.7' of git://git.infradead.org/users/pcmoore/auditLinus Torvalds1-1/+3
Pull audit updates from Paul Moore: "Four small audit patches for 4.7. Two are simple cleanups around the audit thread management code, one adds a tty field to AUDIT_LOGIN events, and the final patch makes tty_name() usable regardless of CONFIG_TTY. Nothing controversial, and it all passes our regression test" * 'stable-4.7' of git://git.infradead.org/users/pcmoore/audit: tty: provide tty_name() even without CONFIG_TTY audit: add tty field to LOGIN event audit: we don't need to __set_current_state(TASK_RUNNING) audit: cleanup prune_tree_thread
2016-05-01Fix OpenSSH pty regression on closeBrian Bloniarz1-1/+1
OpenSSH expects the (non-blocking) read() of pty master to return EAGAIN only if it has received all of the slave-side output after it has received SIGCHLD. This used to work on pre-3.12 kernels. This fix effectively forces non-blocking read() and poll() to block for parallel i/o to complete for all ttys. It also unwinds these changes: 1) f8747d4a466ab2cafe56112c51b3379f9fdb7a12 tty: Fix pty master read() after slave closes 2) 52bce7f8d4fc633c9a9d0646eef58ba6ae9a3b73 pty, n_tty: Simplify input processing on final close 3) 1a48632ffed61352a7810ce089dc5a8bcd505a60 pty: Fix input race when closing Inspired by analysis and patch from Marc Aurele La France <tsi@tuyoix.net> Reported-by: Volth <openssh@volth.com> Reported-by: Marc Aurele La France <tsi@tuyoix.net> BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=52 BugLink: https://bugzilla.mindrot.org/show_bug.cgi?id=2492 Signed-off-by: Brian Bloniarz <brian.bloniarz@gmail.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley1-0/+13
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_SUSPENDED bit and update atomicallyPeter Hurley1-0/+13
Replace ASYNC_SUSPENDED bit in the tty_port::flags field with TTY_PORT_SUSPENDED bit in the tty_port::iflags field. Introduce helpers tty_port_set_suspended() and tty_port_suspended() to abstract atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_CHECK_CD and update atomicallyPeter Hurley1-0/+13
Replace ASYNC_CHECK_CD bit in the tty_port::flags field with TTY_PORT_CHECK_CD bit in the tty_port::iflags field. Introduce helpers tty_port_set_check_carrier() and tty_port_check_carrier() to abstract the atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_NORMAL_ACTIVE bit and update atomicallyPeter Hurley1-0/+12
Replace ASYNC_NORMAL_ACTIVE bit in the tty_port::flags field with TTY_PORT_ACTIVE bit in the tty_port::iflags field. Introduce helpers tty_port_set_active() and tty_port_active() to abstract atomic bit ops. Extract state changes from port lock sections, as this usage is broken and confused; the state transitions are protected by the tty lock (which mutually excludes parallel open/close/hangup), and no user tests the active state while holding the port lock. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_CTS_FLOW bit and update atomicallyPeter Hurley1-2/+10
Replace ASYNC_CTS_FLOW bit in the tty_port::flags field with TTY_PORT_CTS_FLOW bit in the tty_port::iflags field. Add tty_port_set_cts_flow() helper to abstract the atomic bit ops. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Define ASYNC_ replacement bitsPeter Hurley1-1/+15
Prepare for relocating kernel private state bits out of tty_port::flags field; tty_port::flags field is not atomic and can become corrupted by concurrent updates. It also suffers from the complication of sharing in a userspace-visible field which must be masked. Define new tty_port::iflags field and new, substitute bit definitions for the former ASYNC_* flags. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace TTY_THROTTLED bit tests with tty_throttled()Peter Hurley1-0/+5
Abstract TTY_THROTTLED bit tests with tty_throttled(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace TTY_IO_ERROR bit tests with tty_io_error()Peter Hurley1-0/+5
Abstract TTY_IO_ERROR status test treewide with tty_io_error(). NB: tty->flags uses atomic bit ops; replace non-atomic bit test with test_bit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27tty: provide tty_name() even without CONFIG_TTYArnd Bergmann1-1/+3
The audit subsystem just started printing the name of the tty, but that causes a build failure when CONFIG_TTY is disabled: kernel/built-in.o: In function `audit_log_task_info': memremap.c:(.text+0x5e34c): undefined reference to `tty_name' kernel/built-in.o: In function `audit_set_loginuid': memremap.c:(.text+0x63b34): undefined reference to `tty_name' This adds tty_name() to the list of functions that are provided as trivial stubs in that configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: db0a6fb5d97a ("audit: add tty field to LOGIN event") Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-01-28tty: Unify receive_buf() code pathsPeter Hurley1-14/+2
Instead of two distinct code branches for receive_buf() handling, use tty_ldisc_receive_buf() as the single code path. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-28tty: Fix GPF in flush_to_ldisc(), part 2Peter Hurley1-1/+1
commit 9ce119f318ba ("tty: Fix GPF in flush_to_ldisc()") fixed a GPF caused by a line discipline which does not define a receive_buf() method. However, the vt driver (and speakup driver also) pushes selection data directly to the line discipline receive_buf() method via tty_ldisc_receive_buf(). Fix the same problem in tty_ldisc_receive_buf(). Cc: <stable@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Combine push functionsPeter Hurley1-6/+2
tty_audit_push() and tty_audit_push_current() perform identical tasks; eliminate the tty_audit_push() implementation and the tty_audit_push_current() name. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Ignore current association for audit pushPeter Hurley1-2/+2
In canonical read mode, each line read and logged is pushed separately with tty_audit_push(). For all single-threaded processes and multi-threaded processes reading from only one tty, this patch has no effect; the last line read will still be the entry pushed to the audit log because the tty association cannot have changed between tty_audit_add_data() and tty_audit_push(). For multi-threaded processes reading from different ttys concurrently, the audit log will have mixed log entries anyway. Consider two ttys audited concurrently: CPU0 CPU1 ---------- ------------ tty_audit_add_data(ttyA) tty_audit_add_data(ttyB) tty_audit_push() tty_audit_add_data(ttyB) tty_audit_push() This patch will now cause the ttyB output to be split into separate audit log entries. However, this possibility is equally likely without this patch: CPU0 CPU1 ---------- ------------ tty_audit_add_data(ttyB) tty_audit_add_data(ttyA) tty_audit_push() tty_audit_add_data(ttyB) tty_audit_push() Mixed canonical and non-canonical reads have similar races. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: audit: Remove icanon mode from call chainPeter Hurley1-2/+2
The tty termios bits cannot change while n_tty_read() is in the i/o loop; the termios_rwsem ensures mutual exclusion with termios changes in n_tty_set_termios(). Check L_ICANON() directly and eliminate icanon parameter. NB: tty_audit_add_data() => tty_audit_buf_get() => tty_audit_buf_alloc() is a single path; ie., tty_audit_buf_get() and tty_audit_buf_alloc() have no other callers. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Make tty_files_lock per-ttyPeter Hurley1-1/+1
Access to tty->tty_files list is always per-tty, never for all ttys simultaneously. Replace global tty_files_lock spinlock with per-tty ->files_lock. Initialize when the ->tty_files list is inited, in alloc_tty_struct(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Remove unreferenced tty flags macro TTY_DEBUGPeter Hurley1-1/+0
The TTY_DEBUG macro is not used; remove. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Move tty_check_change() helperPeter Hurley1-1/+0
Move is_ignored() to drivers/tty/tty_io.c and re-declare in file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Remove declarations to non-existent functionsPeter Hurley1-3/+0
tty_read_raw_data() and tty_signal() no longer exist; remove declarations. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Eliminate global symbol tty_ldisc_N_TTYPeter Hurley1-2/+1
Reduce global tty symbols; move and rename tty_ldisc_begin() as n_tty_init() and redefine the N_TTY ldisc ops as file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Destroy ldisc instance on hangupPeter Hurley1-1/+2
Currently, when the tty is hungup, the ldisc is re-instanced; ie., the current instance is destroyed and a new instance is created. The purpose of this design was to guarantee a valid, open ldisc for the lifetime of the tty. However, now that tty buffers are owned by and have lifetime equivalent to the tty_port (since v3.10), any data received immediately after the ldisc is re-instanced may cause continued driver i/o operations concurrently with the driver's hangup() operation. For drivers that shutdown h/w on hangup, this is unexpected and usually bad. For example, the serial core may free the xmit buffer page concurrently with an in-progress write() operation (triggered by echo). With the existing stable and robust ldisc reference handling, the cleaned-up tty_reopen(), the straggling unsafe ldisc use cleaned up, and the preparation to properly handle a NULL tty->ldisc, the ldisc instance can be destroyed and only re-instanced when the tty is re-opened. If the tty was opened as /dev/console or /dev/tty0, the original behavior of re-instancing the ldisc is retained (the 'reinit' parameter to tty_ldisc_hangup() is true). This is required since those file descriptors are never hungup. This patch has neglible impact on userspace; the tty file_operations ptr is changed to point to the hungup file operations _before_ the ldisc instance is destroyed, so only racing file operations might now retrieve a NULL ldisc reference (which is simply handled as if the hungup file operation had been called instead -- see "tty: Prepare for destroying line discipline on hangup"). This resolves a long-standing FIXME and several crash reports. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Use 'disc' for line discipline index namePeter Hurley1-1/+1
tty->ldisc is a ptr to struct tty_ldisc, but unfortunately 'ldisc' is also used as a parameter or local name to refer to the line discipline index value (ie, N_TTY, N_GSM, etc.); instead prefer the name used by the line discipline registration/ref counting functions. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Remove __lockfunc annotation from tty lock functionsPeter Hurley1-4/+4
The tty lock/unlock code does not belong in the special lockfunc section which is treated specially by stack backtraces. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Re-declare tty_driver_remove_tty() file scopePeter Hurley1-2/+0
tty_driver_remove_tty() is only local-scope; declare as static. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix tty_init_termios() declarationPeter Hurley1-3/+1
tty_init_termios() never returns an error; re-declare as void. Remove unnecessary error handling from callers. Remove extern declarations of tty_free_termios() and free_tty_struct() and re-declare in file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-27tty: Fix ldisc leak in failed tty_init_dev()Peter Hurley1-1/+0
release_tty() leaks the ldisc instance when called directly (rather than when releasing the file descriptor from tty_release()). Since tty_ldisc_release() clears tty->ldisc, releasing the ldisc instance at tty teardown if tty->ldisc is non-null is not in danger of double-releasing the ldisc. Remove deinitialize_tty_struct() now that free_tty_struct() always performs the tty_ldisc_deinit(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-26tty: Wait interruptibly for tty lock on reopenPeter Hurley1-0/+1
Allow a signal to interrupt the wait for a tty reopen; eg., if the tty has starting final close and is waiting for the device to drain. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> # 4.4 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13tty: Remove dead tty_write_flush() declaration and macroPeter Hurley1-4/+0
tty_write_flush() has no definition and the TTY_WRITE_FLUSH() macro is never invoked; remove. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13tty: Remove __func__ from tty_debug() macroPeter Hurley1-2/+1
Now that tty_debug() macro uses pr_debug(), the function name can be printed when using dynamic debug; printing the function name within the format string is redundant. Remove the __func__ parameter and print specifier from the format string. Add context to messages for when the function name is not printed by dynamic debug, or when dynamic debug is not enabled. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13tty: Define tty_*() printk macrosPeter Hurley1-1/+11
Since not all ttys are devices (eg., SysV ptys), dev_*() printk macros cannot be used. Define tty_*() printk macros that output in similar format to dev_*() macros (ie., <driver> <tty>: .....). Transform the most-trivial printk( LEVEL ...) usage to tty_*() usage. NB: The function name has been eliminated from messages with unique context, or prefixed to the format when given. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13tty: core: Add helper fn to deref tty driver namePeter Hurley1-0/+1
Similar to tty_name(), add tty_driver_name() helper to safely dereference tty->driver->name (otherwise return empty string). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13tty: Make tty_paranoia_check() file scopePeter Hurley1-2/+0
tty_paranoia_check() is only used within drivers/tty/tty_io.c; remove extern declaration in header and limit symbol to file scope. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-13tty: Improve tty_debug() macroPeter Hurley1-5/+2
Incorporate suggestions for tty core debug macro improvements - printk(KERN_DEBUG) => pr_debug() - ##args => ##__VA_ARGS__ - remove do {} while() - output tty_name() first cc: Joe Perches <joe@perches.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-20tty: audit: Fix audit sourcePeter Hurley1-3/+3
The data to audit/record is in the 'from' buffer (ie., the input read buffer). Fixes: 72586c6061ab ("n_tty: Fix auditing support for cannonical mode") Cc: stable <stable@vger.kernel.org> # 4.1+ Cc: Miloslav Trmač <mitr@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Abstract tty buffer workPeter Hurley1-0/+2
Introduce API functions to restart and cancel tty buffer work, rather than manipulate buffer work directly. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Combine SIGTTOU/SIGTTIN handlingPeter Hurley1-0/+1
The job_control() check in n_tty_read() has nearly identical purpose and results as tty_check_change(). Both functions' purpose is to determine if the current task's pgrp is the foreground pgrp for the tty, and if not, to signal the current pgrp. Introduce __tty_check_change() which takes the signal to send and performs the shared operations for job control() and tty_check_change(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Remove wait_event_interruptible_tty()Peter Hurley1-26/+0
In-tree users of wait_event_interruptible_tty() have been removed; remove. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Remove tty_port::close_waitPeter Hurley1-1/+0
With the removal of tty_wait_until_sent_from_close(), tty drivers no longer wait during open for parallel closes to complete (instead, the tty core waits before calling the driver open() method). Thus, the close_wait waitqueue is no longer used for waiting. Remove struct tty_port::close_wait. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-17tty: Remove tty_wait_until_sent_from_close()Peter Hurley1-18/+0
tty_wait_until_sent_from_close() drops the tty lock while waiting for the tty driver to finish sending previously accepted data (ie., data remaining in its write buffer and transmit fifo). tty_wait_until_sent_from_close() was added by commit a57a7bf3fc7e ("TTY: define tty_wait_until_sent_from_close") to prevent the entire tty subsystem from being unable to open new ttys while waiting for one tty to close while output drained. However, since commit 0911261d4cb6 ("tty: Don't take tty_mutex for tty count changes"), holding a tty lock while closing does not prevent other ttys from being opened/closed/hung up, but only prevents lifetime event changes for the tty under lock. Holding the tty lock while waiting for output to drain does prevent parallel non-blocking opens (O_NONBLOCK) from advancing or returning while the tty lock is held. However, all parallel opens _already_ block even if the tty lock is dropped while closing and the parallel open advances. Blocking in open has been in mainline since at least 2.6.29 (see tty_port_block_til_ready(); note the test for O_NONBLOCK is _after_ the wait while ASYNC_CLOSING). IOW, before this patch a non-blocking open will sleep anyway for the _entire_ duration of a parallel hardware shutdown, and when it wakes, the error return will cause a release of its tty, and it will restart with a fresh attempt to open. Similarly with a blocking open that is already waiting; when it's woken, the hardware shutdown has already completed to ASYNC_INITIALIZED is not set, which forces a release and restart as well. So, holding the tty lock across the _entire_ close (which is what this patch does), even while waiting for output to drain, is equivalent to the current outcome wrt parallel opens. Cc: Alan Cox <alan@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Karsten Keil <isdn@linux-pingi.de> CC: linuxppc-dev@lists.ozlabs.org Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: core: Add tty_debug() for printk(KERN_DEBUG) messagesPeter Hurley1-0/+6
Introduce tty_debug() macro to output uniform debug information for tty core debug messages (function name and tty name). Note: printk(KERN_DEBUG) is retained here over pr_debug() since messages can be enabled in non-DEBUG builds. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-18Merge 4.1-rc4 into tty-nextGreg Kroah-Hartman1-1/+1
This resolves some tty driver merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-10pty: Fix input race when closingPeter Hurley1-1/+1
A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: <stable@vger.kernel.org> # 3.19+ Reported-by: Andy Whitcroft <apw@canonical.com> Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06tty: remove buf parameter from tty_name()Rasmus Villemoes1-1/+1
tty_name no longer uses the buf parameter, so remove it along with all the 64 byte stack buffers that used to be passed in. Mostly generated by the coccinelle script @depends on patch@ identifier buf; constant C; expression tty; @@ - char buf[C]; <+... - tty_name(tty, buf) + tty_name(tty) ...+> allmodconfig compiles, so I'm fairly confident the stack buffers weren't used for other purposes as well. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06tty: constify return type of tty_nameRasmus Villemoes1-1/+1
All users of tty_name pass the result directly to a printf-like function. This means we can actually let tty_name return the literal "NULL tty" or tty->name directly, avoiding the strcpy and a lot of medium-sized stack buffers. In preparation for that, make the return type const char*. While at it, we can also constify the tty parameter. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-28tty: Re-add external interface for tty_set_termios()Frederic Danis1-0/+1
This is needed by Bluetooth hci_uart module to be able to change speed of Bluetooth controller and local UART. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02tty: Remove external interface for tty_set_termios()Peter Hurley1-1/+0
tty_set_termios() is an internal helper intended for file scope use. UART drivers which are capable of driving the RTS pin must properly handle the tiocmset() method, regardless of termios settings. A failure to do so is a UART driver bug and should be fixed there. Do not use this interface to workaround UART driver bugs. Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: <linux-bluetooth@vger.kernel.org> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02n_tty: Fix signal handling flushesPeter Hurley1-0/+3
BRKINT and ISIG requires input and output flush when a signal char is received. However, the order of operations is significant since parallel i/o may be ongoing. Merge the signal handling for BRKINT with ISIG handling. Process the signal first. This ensures any ongoing i/o is aborted; without this, a waiting writer may continue writing after the flush occurs and after the signal char has been echoed. Write lock the termios_rwsem, which excludes parallel writers from pushing new i/o until after the output buffers are flushed; claiming the write lock is necessary anyway to exclude parallel readers while the read buffer is flushed. Subclass the termios_rwsem for ptys since the slave pty performing the flush may appear to reorder the termios_rwsem->tty buffer lock lock order; adding annotation clarifies that slave tty_buffer lock-> slave termios_rwsem -> master tty_buffer lock is a valid lock order. Flush the echo buffer. In this context, the echo buffer is 'output'. Otherwise, the output will appear discontinuous because the output buffer was cleared which contains older output than the echo buffer. Open-code the read buffer flush since the input worker does not need kicking (this is the input worker). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-02pty: Fix buffer flush deadlockPeter Hurley1-0/+4
The pty driver does not clear its write buffer when commanded. This is to avoid an apparent deadlock between parallel flushes from both pty ends; specifically when handling either BRK or INTR input. However, parallel flushes from this source is not possible since the pty master can never be set to BRKINT or ISIG. Parallel flushes from other sources are possible but these do not threaten deadlocks. Annotate the tty buffer mutex for lockdep to represent the nested tty_buffer locking which occurs when the pty slave is processing input (its buffer mutex held) and receives INTR or BRK and acquires the linked tty buffer mutex via tty_buffer_flush(). Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 12:52:31 +0000