summaryrefslogtreecommitdiff
path: root/include/linux/ssb/ssb_regs.h
AgeCommit message (Collapse)AuthorFilesLines
2015-01-29bcma: detect SPROM revision 11Rafał Miłecki1-0/+1
Extracting values from it is still unsupported, but at least we'll display some meaningful error now. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-07-18ssb: extract power info from SPROM revs 4 and 5Rafał Miłecki1-0/+37
This is needed to properly handle early 802.11n devices like BCM4321. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22bcma: support SPROM rev 10Rafał Miłecki1-0/+1
This is pretty much the same as rev 9, there are just 2 extra fields we know about, but are not used/stored yet anyway. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25ssb: fix sprom constant for ant_available_{bg,a}Hauke Mehrtens1-5/+5
This was done accordingly to new specs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16ssb: fix SPROM offsetPiotr Haber1-1/+1
Offset for temperature compensation values is wrong in ssb SPROMv8 map. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16bcma/ssb: parse new attributes from spromHauke Mehrtens1-4/+55
These newly added attributes are used by brcmsmac. Now bcma should parse all attributes used by brcmsmac out of the sprom. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb: fill board_rev attribute from spromHauke Mehrtens1-0/+1
This attribute is now used in b43 driver and should be filled for all sprom versions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-16ssb/bcma: fill attribute alpha2 from spromHauke Mehrtens1-0/+1
The attribute country_code and alpha2 are two different attributes in the sprom. country_code contains some code in an 8 bit coding and alpha2 contains two chars with the country code. The attributes where read out wrongly in the past and country_code is only available on sprom version 1. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-24ssb: SPROM: extract each core power infoRafał Miłecki1-0/+34
We already extract some basic info but it's incomplete, reads info about the first core only. Used data structure doesn't allow easy adding of more cores. This patch adds new struct and array for storing power info. The plan is to: switch all extractors (including the ones using NVRAM) to new struct, switch drivers, then deprecate and finally drop old SSB fields. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13ssb: extract FEM info from SPROMRafał Miłecki1-0/+17
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-09ssb: define boardflagsRafał Miłecki1-0/+40
They are SPROM specific, so all should be defined in ssb code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-26ssb: update reject bit for Target State LowRafał Miłecki1-1/+1
My 14e4:4315 is SSB_IDLOW_SSBREV_26: read32 0xfaafcff8 -> 0x600422d5 My 14e4:4328 is SSB_IDLOW_SSBREV_24: read32 0xfaafcff8 -> 0x400422c5 My 14e4:432b is SSB_IDLOW_SSBREV_26 again: read32 0xfaafcff8 -> 0x600422d5 For all of them wl driver is using 0x2 reject bit: write32(0xf98) <- 0x00010002 So it seems SSB 2.3 is the exception using another bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: when needed, reject IM input while disabling deviceRafał Miłecki1-0/+2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-18ssb: remove invalid define SSB_TMSLOW_PHYCLKRafał Miłecki1-1/+0
It was incorrectly introduced in d2730b2a6a019d14455556019d744ab051e6554b. We have already fixed function to use correct define, but forgot remove old one. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-09ssb: extract boardflags2 for SPROMs rev 4 and 5Rafał Miłecki1-0/+4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-02ssb: extract indexes for power tablesRafał Miłecki1-0/+40
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24b43: N-PHY: Implement MAC PHY clock setGábor Stefanik1-0/+1
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: Fix order of definitions and some text space indentsRafał Miłecki1-29/+29
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: Use relative offsets for SPROMRafał Miłecki1-98/+98
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-26ssb: Look for SPROM at different offset on higher rev CCRafał Miłecki1-1/+2
Our offset handling becomes even a little more hackish now. For some reason I do not understand all offsets as inrelative. It assumes base offset is 0x1000 but it will work for now as we make offsets relative anyway by removing base 0x1000. Should be cleaner however. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-14ssb: Implement the remaining rev.8 SPROM vars needed for LP-PHYGábor Stefanik1-7/+59
Also add a "SPEX32" macro for extracting 32-bit SPROM variables. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29b43/ssb: Add SPROM8 extraction and LP-PHY detectionMichael Buesch1-0/+36
This adds detection code for the LP-PHY and SPROM extraction code for version 8, which is needed by the LP-PHY and newer N-PHY. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ssb: Clean up extraction of MAC addresses from SPROMLarry Finger1-4/+0
Only rev 1 and 2 ssb SPROMs have fields named et0mac and et1mac; however, all of the extraction routines extract pseudo data for these fields from regions that are all 1's resulting in a hardware address of FF:FF:FF:FF:FF:FF. This patch forces such a fill at the beginning of the data extraction process, and only does the formal extraction if the SPROM rev is 1 or 2. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29ssb: Update for Rev. 5 SPROMLarry Finger1-0/+15
Although a revision 5 SPROM has not been seen in the wild, the open-source portion of the MIPS driver 4.150.10.5 describes its layout, which is mostly inherited from revision 4. This patch implements the differences. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Fix extraction of values from SPROMMichael Buesch1-14/+24
This fixes extraction of some values from the SPROM. It mainly fixes extraction of antenna related values, which is needed for another b43 fix sent later. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Remove the old, now unused, data structuresLarry Finger1-21/+28
The old, now unused, data structures and SPROM extraction routines are removed. Signed-off-by: Larry Finger<Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Convert to use of the new SPROM structureLarry Finger1-11/+27
In disagreement with the SPROM specs, revision 3 devices appear to have moved the MAC address. Change ssb to handle the revision 4 SPROM, which is a different size. This change in size is handled by adding a new variable to the ssb_sprom struct and using it whenever possible. For those routines that do not have access to this structure, a 'u16 size' argument is added. The new PCI_ID for the BCM4328 is also added. Testing of the Revision 4 SPROM, which is used on the BCM4328, was done by Michael Gerdau <mgerdau@tiscali.de>. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28ssb: Add new SPROM structure while keeping the oldLarry Finger1-0/+32
The SPROM's for various devices utilizing the Sonics Silicon Backplane come with various revisions. The Revision 2 SPROM inherited the data layout of 1, and Revision 3 inherited the layout of 2. The first instance of Revision 4 has now been found in a BCM4328 wireless LAN card. This device does not inherit any layout from previous versions. Although it was possible to create a data structure that kept all the old layouts, we decided to start fresh, keep only those SPROM variables that are used by the drivers that utilize ssb, and to do the conversion in such a manner that neither compilation or execution will be affected if a bisection lands in the middle of these changes, while keeping the patches as small as possible. In this patch, the sprom structures are changed while maintaining the old ones. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10[SSB]: add Sonics Silicon Backplane bus supportMichael Buesch1-0/+292
SSB is an SoC bus used in a number of embedded devices. The most well-known of these devices is probably the Linksys WRT54G, but there are others as well. The bus is also used internally on the BCM43xx and BCM44xx devices from Broadcom. This patch also includes support for SSB ID tables in modules, so that SSB drivers can be loaded automatically. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 03:59:04 +0000