summaryrefslogtreecommitdiff
path: root/include/linux/if_vlan.h
AgeCommit message (Collapse)AuthorFilesLines
2015-12-15net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUMTom Herbert1-1/+1
These netif flags are unnecessary convolutions. It is more straightforward to just use NETIF_F_HW_CSUM, NETIF_F_IP_CSUM, and NETIF_F_IPV6_CSUM directly. This patch also: - Cleans up can_checksum_protocol - Simplifies netdev_intersect_features Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-05net: constify netif_is_* helpers net_device paramJiri Pirko1-1/+1
As suggested by Eric, these helpers should have const dev param. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01vlan: Add GRO support for non hardware accelerated vlanToshiaki Makita1-0/+20
Currently packets with non-hardware-accelerated vlan cannot be handled by GRO. This causes low performance for 802.1ad and stacked vlan, as their vlan tags are currently not stripped by hardware. This patch adds GRO support for non-hardware-accelerated vlan and improves receive performance of them. Test Environment: vlan device (.1Q) on vlan device (.1ad) on ixgbe (82599) Result: - Before $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 5233.17 Rx side CPU usage: %usr %sys %irq %soft %idle 0.27 58.03 0.00 41.70 0.00 - After $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 7586.85 Rx side CPU usage: %usr %sys %irq %soft %idle 0.50 25.83 0.00 59.53 14.14 [ Register VLAN offloads with priority 10 -DaveM ] Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-30if_vlan: fix vlaue -> value typoVivien Didelot1-3/+3
Fixes "vlaue" for "value" in include/linux/if_vlan.h. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05vlan: Use eth_proto_is_802_3Alexander Duyck1-1/+1
Replace "ntohs(proto) >= ETH_P_802_3_MIN" w/ eth_proto_is_802_3(proto). Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29net: Move check for multiple vlans to driversToshiaki Makita1-0/+22
To allow drivers to handle the features check for multiple tags, move the check to ndo_features_check(). As no drivers currently handle multiple tagged TSO, introduce dflt_features_check() and call it if the driver does not have ndo_features_check(). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29vlan: Introduce helper functions to check if skb is taggedToshiaki Makita1-0/+45
Separate the two checks for single vlan and multiple vlans in netif_skb_features(). This allows us to move the check for multiple vlans to another function later. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-14/+46
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30net: Fix vlan_get_protocol for stacked vlanToshiaki Makita1-14/+46
vlan_get_protocol() could not get network protocol if a skb has a 802.1ad vlan tag or multiple vlans, which caused incorrect checksum calculation in several drivers. Fix vlan_get_protocol() to retrieve network protocol instead of incorrect vlan protocol. As the logic is the same as skb_network_protocol(), create a common helper function __vlan_get_protocol() and call it from existing functions. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko1-8/+8
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce __vlan_insert_tag helper which does not free skbJiri Pirko1-11/+34
There's a need for helper which inserts vlan tag but does not free the skb in case of an error. Suggested-by: Pravin Shelar <pshelar@nicira.com> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: introduce *vlan_hwaccel_push_inside helpersJiri Pirko1-0/+34
Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: rename __vlan_put_tag to vlan_insert_tag_set_protoJiri Pirko1-3/+5
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: kill vlan_put_tag helperJiri Pirko1-19/+0
Since both tx and rx paths work with skb->vlan_tci, there's no need for this function anymore. Switch users directly to __vlan_hwaccel_put_tag. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21vlan: make __vlan_hwaccel_put_tag return voidJiri Pirko1-5/+4
Always returns the same skb it gets, so change to void. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-11net: Always untag vlan-tagged traffic on input.Vlad Yasevich1-6/+0
Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+14
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-20vlan: Fix build error wth vlan_get_encap_level()Vlad Yasevich1-5/+11
The new function vlan_get_encap_level() uses vlan_dev_priv() which is only conditionally avaialble when VLAN support is enabled. Make vlan_get_encap_level() conditionally available as well. Fixes: 44a4085538c8 ("bonding: Fix stacked device detection in arp monitoring") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> CC: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16bonding: Fix stacked device detection in arp monitoringVlad Yasevich1-0/+6
Prior to commit fbd929f2dce460456807a51e18d623db3db9f077 bonding: support QinQ for bond arp interval the arp monitoring code allowed for proper detection of devices stacked on top of vlans. Since the above commit, the code can still detect a device stacked on top of single vlan, but not a device stacked on top of Q-in-Q configuration. The search will only set the inner vlan tag if the route device is the vlan device. However, this is not always the case, as it is possible to extend the stacked configuration. With this patch it is possible to provision devices on top Q-in-Q vlan configuration that should be used as a source of ARP monitoring information. For example: ip link add link bond0 vlan10 type vlan proto 802.1q id 10 ip link add link vlan10 vlan100 type vlan proto 802.1q id 100 ip link add link vlan100 type macvlan Note: This patch limites the number of stacked VLANs to 2, just like before. The original, however had another issue in that if we had more then 2 levels of VLANs, we would end up generating incorrectly tagged traffic. This is no longer possible. Fixes: fbd929f2dce460456807a51e18d623db3db9f077 (bonding: support QinQ for bond arp interval) CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@redhat.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Ding Tianhong <dingtianhong@huawei.com> CC: Patric McHardy <kaber@trash.net> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16vlan: Fix lockdep warning with stacked vlan devices.Vlad Yasevich1-1/+2
This reverts commit dc8eaaa006350d24030502a4521542e74b5cb39f. vlan: Fix lockdep warning when vlan dev handle notification Instead we use the new new API to find the lock subclass of our vlan device. This way we can support configurations where vlans are interspersed with other devices: bond -> vlan -> macvlan -> vlan Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12vlan: rename __vlan_find_dev_deep() to __vlan_find_dev_deep_rcu()dingtianhong1-2/+2
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-26vlan: make a new function vlan_dev_vlan_proto() and exportdingtianhong1-0/+7
The vlan support 2 proto: 802.1q and 802.1ad, so make a new function called vlan_dev_vlan_proto() which could return the vlan proto for input dev. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24if_vlan: Call dev_kfree_skb_any instead of kfree_skb.Eric W. Biederman1-1/+1
Replace kfree_skb with dev_kfree_skb_any in vlan_insert_tag as vlan_insert_tag can be called from hard irq context (netpoll) and from other contexts. dev_kfree_skb_any is used as vlan_insert_tag only frees the skb if the skb can not be modified to insert a tag, in which case vlan_insert_tag drops the skb. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-01-058021q: make vlan_pcpu_stats visible without CONFIG_VLAN_8021QHannes Frederic Sowa1-19/+19
macvlan needs vlan_pcpu_stats so make it visible even if compiling without VLAN_8021Q support. Otherwise a very long compiler error happens. Fixes: cdf3e274cf1b36 ("macvlan: unify macvlan_pcpu_stats and vlan_pcpu_stats") Cc: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-By: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11vlan: Implement vlan_dev_get_egress_qos_mask as an inline.David S. Miller1-2/+96
This is to avoid very silly Kconfig dependencies for modules using this routine. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07net/vlan: Provide read access to the vlan egress mapEyal Perry1-1/+8
Provide a method for read-only access to the vlan device egress mapping. Do this by refactoring vlan_dev_get_egress_qos_mask() such that now it receives as an argument the skb priority instead of pointer to the skb. Such an access is needed for the IBoE stack where the control plane goes through the network stack. This is an add-on step on top of commit d4a968658c "net/route: export symbol ip_tos2prio" which allowed the RDMA-CM to use ip_tos2prio. Signed-off-by: Eyal Perry <eyalpe@mellanox.com> Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-18vlan: mask vlan prio bitsEric Dumazet1-2/+1
In commit 48cc32d38a52d0b68f91a171a8d00531edc6a46e ("vlan: don't deliver frames for unknown vlans to protocols") Florian made sure we set pkt_type to PACKET_OTHERHOST if the vlan id is set and we could find a vlan device for this particular id. But we also have a problem if prio bits are set. Steinar reported an issue on a router receiving IPv6 frames with a vlan tag of 4000 (id 0, prio 2), and tunneled into a sit device, because skb->vlan_tci is set. Forwarded frame is completely corrupted : We can see (8100:4000) being inserted in the middle of IPv6 source address : 16:48:00.780413 IP6 2001:16d8:8100:4000:ee1c:0:9d9:bc87 > 9f94:4d95:2001:67c:29f4::: ICMP6, unknown icmp6 type (0), length 64 0x0000: 0000 0029 8000 c7c3 7103 0001 a0ae e651 0x0010: 0000 0000 ccce 0b00 0000 0000 1011 1213 0x0020: 1415 1617 1819 1a1b 1c1d 1e1f 2021 2223 0x0030: 2425 2627 2829 2a2b 2c2d 2e2f 3031 3233 It seems we are not really ready to properly cope with this right now. We can probably do better in future kernels : vlan_get_ingress_priority() should be a netdev property instead of a per vlan_dev one. For stable kernels, lets clear vlan_tci to fix the bugs. Reported-by: Steinar H. Gunderson <sesse@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: vlan: fix comment for vlan_ethhdr->h_vlan_protoOlaf Hering1-1/+1
After addition of 8021AD h_vlan_proto can be either ETH_P_8021Q or ETH_P_8021AD. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07net: vlan: minor: remove unused HAVE_VLAN_PUT_TAGDaniel Borkmann1-2/+0
Remove the definition of HAVE_VLAN_PUT_TAG since it's not used or exported anywhere. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-21net: vlan: fix dummy function signatures for CONFIG_VLAN=nPatrick McHardy1-3/+4
Fix up some function signatures for CONFIG_VLAN=n that were missed during the 802.1ad support patches. Found by the kbuild robot. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add 802.1ad supportPatrick McHardy1-2/+4
Add support for 802.1ad VLAN devices. This mainly consists of checking for ETH_P_8021AD in addition to ETH_P_8021Q in a couple of places and check offloading capabilities based on the used protocol. Configuration is done using "ip link": # ip link add link eth0 eth0.1000 \ type vlan proto 802.1ad id 1000 # ip link add link eth0.1000 eth0.1000.1000 \ type vlan proto 802.1q id 1000 52:54:00:12:34:56 > 92:b1:54:28:e4:8c, ethertype 802.1Q (0x8100), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 0, offset 0, flags [DF], proto ICMP (1), length 84) 20.1.0.2 > 20.1.0.1: ICMP echo request, id 3003, seq 8, length 64 92:b1:54:28:e4:8c > 52:54:00:12:34:56, ethertype 802.1Q-QinQ (0x88a8), length 106: vlan 1000, p 0, ethertype 802.1Q, vlan 1000, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 47944, offset 0, flags [none], proto ICMP (1), length 84) 20.1.0.1 > 20.1.0.2: ICMP echo reply, id 3003, seq 8, length 64 Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: add protocol argument to packet tagging functionsPatrick McHardy1-9/+24
Add a protocol argument to the VLAN packet tagging functions. In case of HW tagging, we need that protocol available in the ndo_start_xmit functions, so it is stored in a new field in the skb. The new field fits into a hole (on 64 bit) and doesn't increase the sks's size. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad supportPatrick McHardy1-1/+1
Make the encapsulation protocol value a property of VLAN devices and change the device lookup functions to take the protocol value into account. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: prepare for 802.1ad VLAN filtering offloadPatrick McHardy1-2/+2
Change the rx_{add,kill}_vid callbacks to take a protocol argument in preparation of 802.1ad support. The protocol argument used so far is always htons(ETH_P_8021Q). Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-2/+2
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28net: add ETH_P_802_3_MINSimon Horman1-1/+1
Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only. Cc: David Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Bart De Schuymer <bart.de.schuymer@pandora.be> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Cc: netfilter-devel@vger.kernel.org Cc: bridge@lists.linux-foundation.org Cc: linux-wireless@vger.kernel.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-media@vger.kernel.org Cc: netdev@vger.kernel.org Cc: dev@openvswitch.org Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-23vlan: adjust vlan_set_encap_proto() for its callersCong Wang1-3/+3
There are two places to call vlan_set_encap_proto(): vlan_untag() and __pop_vlan_tci(). vlan_untag() assumes skb->data points after mac addr, otherwise the following code vhdr = (struct vlan_hdr *) skb->data; vlan_tci = ntohs(vhdr->h_vlan_TCI); __vlan_hwaccel_put_tag(skb, vlan_tci); skb_pull_rcsum(skb, VLAN_HLEN); won't be correct. But __pop_vlan_tci() assumes points _before_ mac addr. In vlan_set_encap_proto(), it looks for some magic L2 value after mac addr: rawp = skb->data; if (*(unsigned short *) rawp == 0xFFFF) ... Therefore __pop_vlan_tci() is obviously wrong. A quick fix is avoiding using skb->data in vlan_set_encap_proto(), use 'vhdr+1' is always correct in both cases. Cc: David S. Miller <davem@davemloft.net> Cc: Jesse Gross <jesse@nicira.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-13UAPI: (Scripted) Disintegrate include/linuxDavid Howells1-50/+1
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-10-08vlan: don't deliver frames for unknown vlans to protocolsFlorian Zumbiehl1-4/+4
6a32e4f9dd9219261f8856f817e6655114cfec2f made the vlan code skip marking vlan-tagged frames for not locally configured vlans as PACKET_OTHERHOST if there was an rx_handler, as the rx_handler could cause the frame to be received on a different (virtual) vlan-capable interface where that vlan might be configured. As rx_handlers do not necessarily return RX_HANDLER_ANOTHER, this could cause frames for unknown vlans to be delivered to the protocol stack as if they had been received untagged. For example, if an ipv6 router advertisement that's tagged for a locally not configured vlan is received on an interface with macvlan interfaces attached, macvlan's rx_handler returns RX_HANDLER_PASS after delivering the frame to the macvlan interfaces, which caused it to be passed to the protocol stack, leading to ipv6 addresses for the announced prefix being configured even though those are completely unusable on the underlying interface. The fix moves marking as PACKET_OTHERHOST after the rx_handler so the rx_handler, if there is one, sees the frame unchanged, but afterwards, before the frame is delivered to the protocol stack, it gets marked whether there is an rx_handler or not. Signed-off-by: Florian Zumbiehl <florz@florz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-24vlan: add helper which can be called to see if device is used by vlanJiri Pirko1-2/+7
also, remove unused vlan_info definition from header CC: Patrick McHardy <kaber@trash.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-24Merge tag 'bug-for-3.4' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull <linux/bug.h> cleanup from Paul Gortmaker: "The changes shown here are to unify linux's BUG support under the one <linux/bug.h> file. Due to historical reasons, we have some BUG code in bug.h and some in kernel.h -- i.e. the support for BUILD_BUG in linux/kernel.h predates the addition of linux/bug.h, but old code in kernel.h wasn't moved to bug.h at that time. As a band-aid, kernel.h was including <asm/bug.h> to pseudo link them. This has caused confusion[1] and general yuck/WTF[2] reactions. Here is an example that violates the principle of least surprise: CC lib/string.o lib/string.c: In function 'strlcat': lib/string.c:225:2: error: implicit declaration of function 'BUILD_BUG_ON' make[2]: *** [lib/string.o] Error 1 $ $ grep linux/bug.h lib/string.c #include <linux/bug.h> $ We've included <linux/bug.h> for the BUG infrastructure and yet we still get a compile fail! [We've not kernel.h for BUILD_BUG_ON.] Ugh - very confusing for someone who is new to kernel development. With the above in mind, the goals of this changeset are: 1) find and fix any include/*.h files that were relying on the implicit presence of BUG code. 2) find and fix any C files that were consuming kernel.h and hence relying on implicitly getting some/all BUG code. 3) Move the BUG related code living in kernel.h to <linux/bug.h> 4) remove the asm/bug.h from kernel.h to finally break the chain. During development, the order was more like 3-4, build-test, 1-2. But to ensure that git history for bisect doesn't get needless build failures introduced, the commits have been reorderd to fix the problem areas in advance. [1] https://lkml.org/lkml/2012/1/3/90 [2] https://lkml.org/lkml/2012/1/17/414" Fix up conflicts (new radeon file, reiserfs header cleanups) as per Paul and linux-next. * tag 'bug-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: kernel.h: doesn't explicitly use bug.h, so don't include it. bug: consolidate BUILD_BUG_ON with other bug code BUG: headers with BUG/BUG_ON etc. need linux/bug.h bug.h: add include of it to various implicit C users lib: fix implicit users of kernel.h for TAINT_WARN spinlock: macroize assert_spin_locked to avoid bug.h dependency x86: relocate get/set debugreg fcns to include/asm/debugreg.
2012-03-19if_vlan: Remove VLAN_ETH_ALEN define and the 1 use of itJoe Perches1-4/+3
Just use ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-04BUG: headers with BUG/BUG_ON etc. need linux/bug.hPaul Gortmaker1-0/+1
If a header file is making use of BUG, BUG_ON, BUILD_BUG_ON, or any other BUG variant in a static inline (i.e. not in a #define) then that header really should be including <linux/bug.h> and not just expecting it to be implicitly present. We can make this change risk-free, since if the files using these headers didn't have exposure to linux/bug.h already, they would have been causing compile failures/warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-12-08vlan: introduce functions to do mass addition/deletion of vids by another deviceJiri Pirko1-0/+15
Introduce functions handy to copy vlan ids from one driver's list to another. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08vlan: introduce vid list with reference countingJiri Pirko1-16/+1
This allows to keep track of vids needed to be in rx vlan filters of devices even if they are used in bond/team etc. vlan_info as well as vlan_group previously was, is allocated when first vid is added and dealocated whan last vid is deleted. vlan_group definition is moved to private header. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08net: introduce vlan_vid_[add/del] and use them instead of direct ↵Jiri Pirko1-0/+12
[add/kill]_vid ndo calls This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this wrapper. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08vlan: rename vlan_dev_info to vlan_dev_privJiri Pirko1-1/+1
As this structure is priv, name it approprietely. Also for pointer to it use name "vlan". Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-03vlan: Move vlan_set_encap_proto() to vlan header filePravin B Shelar1-0/+34
Open vSwitch needs this function for vlan handling. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2011-10-30vlan: allow nested vlan_do_receive()Eric Dumazet1-3/+3
commit 2425717b27eb (net: allow vlan traffic to be received under bond) broke ARP processing on vlan on top of bonding. +-------+ eth0 --| bond0 |---bond0.103 eth1 --| | +-------+ 52870.115435: skb_gro_reset_offset <-napi_gro_receive 52870.115435: dev_gro_receive <-napi_gro_receive 52870.115435: napi_skb_finish <-napi_gro_receive 52870.115435: netif_receive_skb <-napi_skb_finish 52870.115435: get_rps_cpu <-netif_receive_skb 52870.115435: __netif_receive_skb <-netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: bond_handle_frame <-__netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: arp_rcv <-__netif_receive_skb 52870.115436: kfree_skb <-arp_rcv Packet is dropped in arp_rcv() because its pkt_type was set to PACKET_OTHERHOST in the first vlan_do_receive() call, since no eth0.103 exists. We really need to change pkt_type only if no more rx_handler is about to be called for the packet. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 16:11:24 +0000