| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The default reservation size of 4 (32-bit windows) is a bit too ambitious.
Scale it back to 16 bits (resv_level=2). I have been testing various sizes
on a 4-node cluster which runs a mixed workload that is heavily threaded.
With a 256MB local alloc, I get *roughly* the following levels of average file
fragmentation:
resv_level=0 70%
resv_level=1 21%
resv_level=2 23%
resv_level=3 24%
resv_level=4 60%
resv_level=5 did not test
resv_level=6 60%
resv_level=2 seemed like a good compromise between not letting windows be
too small, but not so big that heavier workloads will immediately suffer
without tuning.
This patch also change the behavior of directory reservations - they now
track file reservations. The previous compromise of giving directory
windows only 8 bits wound up fragmenting more at some window sizes because
file allocations had smaller unused windows to poach from.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
I have observed that the current size of 8M gives us pretty poor
fragmentation on multi-threaded workloads which do lots of writes.
Generally, I can increase the size of local alloc windows and observe a
marked decrease in fragmentation, even up and beyond window sizes of 512
megabytes. This makes sense for a couple reasons - larger local alloc means
more room for reservation windows. On multi-node workloads the larger local
alloc helps as well because we don't have to do window slides as often.
Also, I removed the OCFS2_DEFAULT_LOCAL_ALLOC_SIZE constant as it is no
longer used and the comment above it was out of date.
To test fragmentation, I used a workload which launched 4 threads that did
4k writes into a series of about 140 alternating files.
With resv_level=2, and a 4k/4k file system I observed the following average
fragmentation for various localalloc= parameters:
localalloc= avg. fragmentation
8 48
32 16
64 10
120 7
On larger cluster sizes, the difference is more dramatic.
The new default size top out at 256M, which we'll only get for cluster
sizes of 32K and above.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
This patch pulls the local alloc sizing code into localalloc.c and provides
a callout to it from ocfs2_fill_super(). Behavior is essentially unchanged
except that I correctly calculate the maximum local alloc size. The old code
in ocfs2_parse_options() calculated the max size as:
ocfs2_local_alloc_size(sb) * 8
which is correct, in bits. Unfortunately though the option passed in is in
megabytes. Ultimately, this bug made no real difference - the shrink code
would catch a too-large size and bring it down to something reasonable.
Still, it's less than efficient as-is.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
Inodes are always allocated from the global bitmap now so we don't need this
any more. Also, the existing implementation bounces reservations around
needlessly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Otherwise, the need for a very large contiguous allocation tends to
wreak havoc on many inode allocation reservations on the local alloc, thus
ruining any chances for contiguousness.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Use the reservations system for unindexed dir tree allocations. We don't
bother with the indexed tree as reads from it are mostly random anyway.
Directory reservations are marked seperately, to allow the reservations code
a chance to optimize their window sizes. This patch allocates only 8 bits
for directory windows as they generally are not expected to grow as quickly
as file data. Future improvements to dir window sizing can trivially be
made.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
Add a per-inode reservations structure and pass it through to the
reservations code.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
This patch improves Ocfs2 allocation policy by allowing an inode to
reserve a portion of the local alloc bitmap for itself. The reserved
portion (allocation window) is advisory in that other allocation
windows might steal it if the local alloc bitmap becomes
full. Otherwise, the reservations are honored and guaranteed to be
free. When the local alloc window is moved to a different portion of
the bitmap, existing reservations are discarded.
Reservation windows are represented internally by a red-black
tree. Within that tree, each node represents the reservation window of
one inode. An LRU of active reservations is also maintained. When new
data is written, we allocate it from the inodes window. When all bits
in a window are exhausted, we allocate a new one as close to the
previous one as possible. Should we not find free space, an existing
reservation is pulled off the LRU and cannibalized.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
|
|
jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0
since before the kernel moved to git. There is no point in checking
this error.
ocfs2_journal_dirty() has been faithfully returning the status since the
beginning. All over ocfs2, we have blocks of code checking this can't
fail status. In the past few years, we've tried to avoid adding these
checks, because they are pointless. But anyone who looks at our code
assumes they are needed.
Finally, ocfs2_journal_dirty() is made a void function. All error
checking is removed from other files. We'll BUG_ON() the status of
jbd2_journal_dirty_metadata() just in case they change it someday. They
won't.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
When the local alloc file changes windows, unused bits are freed back to the
global bitmap. By defnition, those bits can not be in use by any file. Also,
the local alloc will never have been able to allocate those bits if they
were part of a previous truncate. Therefore it makes sense that we should
clear unused local alloc bits in the undo buffer so that they can be used
immediatly.
[ Modified to call it ocfs2_release_clusters() -- Joel ]
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
You can't store a pointer that you haven't filled in yet and expect it
to work.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
When replacing a xattr's value, in some case we wipe its name/value
first and then re-add it. The wipe is done by
ocfs2_xa_block_wipe_namevalue() when the xattr is in the inode or
block. We currently adjust name_offset for all the entries which have
(offset < name_offset). This does not adjust the entrie we're replacing.
Since we are replacing the entry, we don't adjust the total entry count.
When we calculate a new namevalue location, we trust the entries
now-wrong offset in ocfs2_xa_get_free_start(). The solution is to
also adjust the name_offset for the replaced entry, allowing
ocfs2_xa_get_free_start() to calculate the new namevalue location
correctly.
The following script can trigger a kernel panic easily.
echo 'y'|mkfs.ocfs2 --fs-features=local,xattr -b 4K $DEVICE
mount -t ocfs2 $DEVICE $MNT_DIR
FILE=$MNT_DIR/$RANDOM
for((i=0;i<76;i++))
do
string_76="a$string_76"
done
string_78="aa$string_76"
string_82="aaaa$string_78"
touch $FILE
setfattr -n 'user.test1234567890' -v $string_76 $FILE
setfattr -n 'user.test1234567890' -v $string_78 $FILE
setfattr -n 'user.test1234567890' -v $string_82 $FILE
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
What we were doing before was to ask for the current window size as the
maximum allocation. This had the effect of limiting the amount of allocation
we could get for the local alloc during times when the window size was
shrunk due to fragmentation. In some cases, that could actually *increase*
fragmentation by artificially limiting the number of bits we can accept. So
while we still want to ask for a minimum number of bits equal to window
size, there is no reason why we should limit the number of bits the local
alloc should accept. Hence always allow the maximum number of local alloc
bits.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_set_acl() and ocfs2_init_acl() were setting i_mode on the in-memory
inode, but never setting it on the disk copy. Thus, acls were some times not
getting propagated between nodes. This patch fixes the issue by adding a
helper function ocfs2_acl_set_mode() which does this the right way.
ocfs2_set_acl() and ocfs2_init_acl() are then updated to call
ocfs2_acl_set_mode().
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In reflink, we need to upate i_blocks for the target inode.
Reported-by: Jie Liu <jeff.liu@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
In ocfs2_validate_gd_parent, we check bg_chain against the
cl_next_free_rec of the dinode. Actually in resize, we have
the chance of bg_chain == cl_next_free_rec. So add some
additional condition check for it.
I also rename paramter "clean_error" to "resize", since the
old one is not clearly enough to indicate that we should only
meet with this case in resize.
btw, the correpsonding bug is
http://oss.oracle.com/bugzilla/show_bug.cgi?id=1230.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
ocfs2_lock() will skip locks on file which has mode set to 02666. This
is a problem in cases where the mode of the file is changed after a
process has obtained a lock on the file.
ocfs2_lock() should skip the check for mandatory locks when unlocking a
file.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: remove whitespaces before quoted newlines
nilfs2: remove spaces before tabs
nilfs2: fix various typos in comments
nilfs2: fix typo "cout" -> "count" in error message
nilfs2: fix function name typos in docbook comments
nilfs2: fix discrepancy in use of static specifier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: Skip check for mandatory locks when unlocking
9p: Fixes a simple bug enabling writes beyond 2GB.
9p: Change the name of new protocol from 9p2010.L to 9p2000.L
fs/9p: re-init the wstat in readdir loop
net/9p: Add sysfs mount_tag file for virtio 9P device
net/9p: Use the tag name in the config space for identifying mount point
|
|
This kills the following checkpatch warnings:
WARNING: unnecessary whitespace before a quoted newline
#869: FILE: super.c:869:
+ "remount to a different snapshot. \n",
WARNING: unnecessary whitespace before a quoted newline
#389: FILE: the_nilfs.c:389:
+ printk(KERN_ERR "NILFS: too short segment. \n");
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This kills the following checkpatch warnings:
WARNING: please, no space before tabs
#74: FILE: segment.h:74:
+^Iunsigned ^I^Iflags;$
WARNING: please, no space before tabs
#35: FILE: segbuf.c:35:
+^Iint ^I^I^Istart, end; /* The region to be submitted */$
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
This fixes various typos I found in comments of nilfs2.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Fixes the following typos in docbook comments:
nilfs_detroy_transaction_cache -> nilfs_destroy_transaction_cache
nilfs_secgtor_start_timer -> nilfs_segctor_start_timer
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
Two segbuf functions, nilfs_segbuf_write and nilfs_segbuf_wait, are
declared with the static storage class specifier, but their
implementations are not.
This fixes the discrepancy.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
GFS2: Skip check for mandatory locks when unlocking
GFS2: Allow the number of committed revokes to temporarily be negative
GFS2: do not select QUOTA
|
|
While investigating a bug, I came across a possible bug in v9fs. The
problem is similar to the one reported for NFS by ASANO Masahiro in
http://lkml.org/lkml/2005/12/21/334.
v9fs_file_lock() will skip locks on file which has mode set to 02666.
This is a problem in cases where the mode of the file is changed after
a process has obtained a lock on the file. Such a lock will be skipped
during unlock and the machine will end up with a BUG in
locks_remove_flock().
v9fs_file_lock() should skip the check for mandatory locks when
unlocking a file.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
Fixes a simple bug so that large files beyond 2GB can be created.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
This patch changes the name of the new 9P protocol from 9p2010.L to
9p2000.u. This is because we learnt that the name 9p2010 is already
being used by others.
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
This ensure that on failure when we free the stat buf we don't end up
freeing an already freed pointer in the earlier loop
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
fat: Fix stat->f_namelen
fat: Fix vfat_lookup()
|
|
Inotify was switched to use anon_inode instead of its own private filesystem
which only had one inode in commit c44dcc56d2b5c7 "switch inotify_user to
anon_inode"
The problem with this is that now the inotify inode is not a distinct inode
which can be managed by LSMs. userspace tools which use inotify were allowed
to use the inotify inode but may not have had permission to do read/write type
operations on the anon_inode. After looking at the anon_inode and its users
it looks like the best solution is to just mark the anon_inode as S_PRIVATE
so the security system will ignore it.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
udf: use ext2_find_next_bit
udf: Do not read inode before writing it
udf: Fix unalloc space handling in udf_update_inode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
doc: fix typo in comment explaining rb_tree usage
Remove fs/ntfs/ChangeLog
doc: fix console doc typo
doc: cpuset: Update the cpuset flag file
Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
Remove drivers/parport/ChangeLog
Remove drivers/char/ChangeLog
doc: typo - Table 1-2 should refer to "status", not "statm"
tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
devres/irq: Fix devm_irq_match comment
Remove reference to kthread_create_on_cpu
tree-wide: Assorted spelling fixes
tree-wide: fix 'lenght' typo in comments and code
drm/kms: fix spelling in error message
doc: capitalization and other minor fixes in pnp doc
devres: typo fix s/dev/devm/
Remove redundant trailing semicolons from macros
fix typo "definetly" -> "definitely" in comment
tree-wide: s/widht/width/g typo in comments
...
Fix trivial conflict in Documentation/laptops/00-INDEX
|
|
Alex Viskovatoff let me know that after copying data to solaris's ufs from
linux, solaris's fsck sees some errors in cylinder summary information.
This is because of solaris expects find some data on another places, then
curernt implementation save it. This patch fixes this issue. It is
tested by me, and also Alex reported that it works for him.
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Reported-by: Alex Viskovatoff <viskovatoff@imap.cc>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Recent releases of Solaris set the fs_clean state of an unmounted UFS file
system as FSLOG ("logging fs"). However, the Linux kernel currently does
not recognize the value which represents this state. Thus, attempting to
mount such a file system rw produces the message
kernel: ufs_read_super: can't grok fs_clean 0xfffffffd
and the file system is mounted read-only. This patch makes the kernel
recognize that value.
Signed-off-by: Alex Viskovatoff <viskovatoff@imap.cc>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a generic implementation of the old select() syscall, which expects
its argument in a memory block and switch all architectures over to use
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When using slub, having a kmem_cache constructor forces slub to add a free
pointer to the size of the cached object, which can have a significant
impact to the number of small objects that can fit into a slab.
As buffer_head is relatively small and we can have large numbers of them,
removing the constructor is a definite win.
On x86_64 removing the constructor gives me 39 objects/slab, 3 more than
without the patch. And on x86_32 73 objects/slab, which is 9 more.
As alloc_buffer_head() already initializes each new object there is very
little difference in actual code run.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <jens.axboe@oracle.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Acked-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
gfs2_lock() will skip locks on file which have mode set to 02666. This is a problem in cases where the mode of the file is changed after a process has obtained a lock on the file. Such a lock will be skipped and will result in a BUG in locks_remove_flock().
gfs2_lock() should skip the check for mandatory locks when unlocking a file.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
GFS2 tracks the number of revokes and unrevokes that are part of committed
transactions via sd_log_commited_revoke. It is possible for one process to add
revokes during its transaction, while another process unrevokes them during its
transaction. If the second process finishes its transaction first,
sd_log_commited_revoke will be decremented by the number of unrevokes that the
second process did, without first being incremented by the number of revokes
the first process did. This is fine, since all started transactions must be
completed before the journal can be flushed. However, sd_log_commited_revoke
is an unsigned integer, and log_refund() causes an assertion failure if it
would go negative at the end of a transaction. This patch makes
sd_log_commited_revoke a signed integer and allows it to go negative.
__gfs2_log_flush() still checks that it mataches the actual number of revokes.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
Use ext2_find_next_bit (generic_find_next_le_bit) to find the set bit
in little endian bitmap region.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
We needlessly read inode in udf_update_inode just before zeroing out the
contents of the buffer. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Writing of inode holding unallocated space info was broken because we first
cleared the buffer and after that checked whether it contains a tag meaning the
block holds unallocated space information. Fix the problem by checking
appropriate in memory flag instead.
Also cleanup the function a bit along the way - most importantly lock buffer
when modifying its contents, check for buffer_write_io_error instead of
!buffer_uptodate, etc..
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
gfs2 only needs the quotactl code, not the generic quota implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
Btrfs: kfree correct pointer during mount option parsing
Btrfs: use RB_ROOT to intialize rb_trees instead of setting rb_node to NULL
|
|
We kstrdup the options string, but then strsep screws with the pointer,
so when we kfree() it, we're not giving it the right pointer.
Tested-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
btrfs inialize rb trees in quite a number of places by settin rb_node =
NULL; The problem with this is that 17d9ddc72fb8bba0d4f678 in the
linux-next tree adds a new field to that struct which needs to be NULL for
the new rbtree library code to work properly. This patch uses RB_ROOT as
the intializer so all of the relevant fields will be NULL'd. Without the
patch I get a panic.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (62 commits)
msi-laptop: depends on RFKILL
msi-laptop: Detect 3G device exists by standard ec command
msi-laptop: Add resume method for set the SCM load again
msi-laptop: Support some MSI 3G netbook that is need load SCM
msi-laptop: Add threeg sysfs file for support query 3G state by standard 66/62 ec command
msi-laptop: Support standard ec 66/62 command on MSI notebook and nebook
Driver core: create lock/unlock functions for struct device
sysfs: fix for thinko with sysfs_bin_attr_init()
sysfs: Kill unused sysfs_sb variable.
sysfs: Pass super_block to sysfs_get_inode
driver core: Use sysfs_rename_link in device_rename
sysfs: Implement sysfs_rename_link
sysfs: Pack sysfs_dirent more tightly.
sysfs: Serialize updates to the vfs inode
sysfs: windfarm: init sysfs attributes
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on module dynamic attributes
sysfs: Document sysfs_attr_init and sysfs_bin_attr_init
sysfs: Use sysfs_attr_init and sysfs_bin_attr_init on dynamic attributes
sysfs: Use one lockdep class per sysfs attribute.
sysfs: Only take active references on attributes.
...
|
|
Conflicts:
Documentation/filesystems/proc.txt
arch/arm/mach-u300/include/mach/debug-macro.S
drivers/net/qlge/qlge_ethtool.c
drivers/net/qlge/qlge_main.c
drivers/net/typhoon.c
|
