| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
__tracepoint_str cannot be const because the tracepoint_str
section is not read-only. Remove the stray const.
Cc: dhowells@redhat.com
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
|
|
get_seconds() has a limited range on 32-bit architectures and is
deprecated because of that. While AFS uses the same limits for
its inode timestamps on the wire protocol, let's just use the
simpler current_time() as we do for other file systems.
This will still zero out the 'tv_nsec' field of the timestamps
internally.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Check the state of the rxrpc call backing an afs call in each iteration of
the call wait loop in case the rxrpc call has already been terminated at
the rxrpc layer.
Interrupt the wait loop and mark the afs call as complete if the rxrpc
layer call is complete.
There were cases where rxrpc errors were not passed up to afs, which could
result in this loop waiting forever for an afs call to transition to
AFS_CALL_COMPLETE while the rx call was already complete.
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.
Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the last bio returned is not dio->bio, the status of the bio will
not assigned to dio->bio if it is error. This will cause the whole IO
status wrong.
ksoftirqd/21-117 [021] ..s. 4017.966090: 8,0 C N 4883648 [0]
<idle>-0 [018] ..s. 4017.970888: 8,0 C WS 4924800 + 1024 [0]
<idle>-0 [018] ..s. 4017.970909: 8,0 D WS 4935424 + 1024 [<idle>]
<idle>-0 [018] ..s. 4017.970924: 8,0 D WS 4936448 + 321 [<idle>]
ksoftirqd/21-117 [021] ..s. 4017.995033: 8,0 C R 4883648 + 336 [65475]
ksoftirqd/21-117 [021] d.s. 4018.001988: myprobe1: (blkdev_bio_end_io+0x0/0x168) bi_status=7
ksoftirqd/21-117 [021] d.s. 4018.001992: myprobe: (aio_complete_rw+0x0/0x148) x0=0xffff802f2595ad80 res=0x12a000 res2=0x0
We always have to assign bio->bi_status to dio->bio.bi_status because we
will only check dio->bio.bi_status when we return the whole IO to
the upper layer.
Fixes: 542ff7bf18c6 ("block: new direct I/O implementation")
Cc: stable@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix parsing of compression algorithm when set as a inode property,
this could end up with eg. 'zst' or 'zli' in the value
- don't allow trim on a filesystem with unreplayed log, this could
cause data loss if there are pending updates to the block groups that
would not be subject to trim after replay
* tag 'for-5.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prop: fix vanished compression property after failed set
btrfs: prop: fix zstd compression parameter validation
Btrfs: do not allow trimming when a fs is mounted with the nologreplay option
|
|
According to the NFSv4.2 spec if the input and output file is the
same file, operation should fail with EINVAL. However, linux
copy_file_range() system call has no such restrictions. Therefore,
in such case let's return EOPNOTSUPP and allow VFS to fallback
to doing do_splice_direct(). Also when copy_file_range is called
on an NFSv4.0 or 4.1 mount (ie., a server that doesn't support
COPY functionality), we also need to return EOPNOTSUPP and
fallback to a regular copy.
Fixes xfstest generic/075, generic/091, generic/112, generic/263
for all NFSv4.x versions.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
NFSv4 GETACL and FS_LOCATIONS requests stopped working in v5.1-rc.
These two need the extra padding to be added directly to the reply
length.
Reported-by: Olga Kornievskaia <aglo@umich.edu>
Fixes: 02ef04e432ba ("NFS: Account for XDR pad of buf->pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Olga Kornievskaia <aglo@umich.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
syzbot is reporting uninitialized value at rpc_sockaddr2uaddr() [1]. This
is because syzbot is setting AF_INET6 to "struct sockaddr_in"->sin_family
(which is embedded into user-visible "struct nfs_mount_data" structure)
despite nfs23_validate_mount_data() cannot pass sizeof(struct sockaddr_in6)
bytes of AF_INET6 address to rpc_sockaddr2uaddr().
Since "struct nfs_mount_data" structure is user-visible, we can't change
"struct nfs_mount_data" to use "struct sockaddr_storage". Therefore,
assuming that everybody is using AF_INET family when passing address via
"struct nfs_mount_data"->addr, reject if its sin_family is not AF_INET.
[1] https://syzkaller.appspot.com/bug?id=599993614e7cbbf66bc2656a919ab2a95fb5d75c
Reported-by: syzbot <syzbot+047a11c361b872896a4f@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Pull misc fixes from Al Viro:
"A few regression fixes from this cycle"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: use kmem_cache_free() instead of kfree()
iov_iter: Fix build error without CONFIG_CRYPTO
aio: Fix an error code in __io_submit_one()
|
|
This options spawns a kernel side thread that will poll for submissions
(and completions, if IORING_SETUP_IOPOLL is set). As this allows a user
to potentially use more cycles outside of the normal hierarchy,
restrict the use of this feature to root.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If there are multiple callbacks queued, waiting for the callback
slot when the callback gets shut down, then they all currently
end up acting as if they hold the slot, and call
nfsd4_cb_sequence_done() resulting in interesting side-effects.
In addition, the 'retry_nowait' path in nfsd4_cb_sequence_done()
causes a loop back to nfsd4_cb_prepare() without first freeing the
slot, which causes a deadlock when nfsd41_cb_get_slot() gets called
a second time.
This patch therefore adds a boolean to track whether or not the
callback did pick up the slot, so that it can do the right thing
in these 2 cases.
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Pull block fixes from Jens Axboe:
- Fixups for the pf/pcd queue handling (YueHaibing)
- Revert of the three direct issue changes as they have been proven to
cause an issue with dm-mpath (Bart)
- Plug rq_count reset fix (Dongli)
- io_uring double free in fileset registration error handling (me)
- Make null_blk handle bad numa node passed in (John)
- BFQ ifdef fix (Konstantin)
- Flush queue leak fix (Shenghui)
- Plug trace fix (Yufen)
* tag 'for-linus-20190407' of git://git.kernel.dk/linux-block:
xsysace: Fix error handling in ace_setup
null_blk: prevent crash from bad home_node value
block: Revert v5.0 blk_mq_request_issue_directly() changes
paride/pcd: Fix potential NULL pointer dereference and mem leak
blk-mq: do not reset plug->rq_count before the list is sorted
paride/pf: Fix potential NULL pointer dereference
io_uring: fix double free in case of fileset regitration failure
blk-mq: add trace block plug and unplug for multiple queues
block: use blk_free_flush_queue() to free hctx->fq in blk_mq_init_hctx
block/bfq: fix ifdef for CONFIG_BFQ_GROUP_IOSCHED=y
|
|
run simultaneously without deadlock
Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added
locking for file.f_pos access and in particular made concurrent read and
write not possible - now both those functions take f_pos lock for the
whole run, and so if e.g. a read is blocked waiting for data, write will
deadlock waiting for that read to complete.
This caused regression for stream-like files where previously read and
write could run simultaneously, but after that patch could not do so
anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes
to /proc/xen/xenbus") which fixes such regression for particular case of
/proc/xen/xenbus.
The patch that added f_pos lock in 2014 did so to guarantee POSIX thread
safety for read/write/lseek and added the locking to file descriptors of
all regular files. In 2014 that thread-safety problem was not new as it
was already discussed earlier in 2006.
However even though 2006'th version of Linus's patch was adding f_pos
locking "only for files that are marked seekable with FMODE_LSEEK (thus
avoiding the stream-like objects like pipes and sockets)", the 2014
version - the one that actually made it into the tree as 9c225f2655e3 -
is doing so irregardless of whether a file is seekable or not.
See
https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/
https://lwn.net/Articles/180387
https://lwn.net/Articles/180396
for historic context.
The reason that it did so is, probably, that there are many files that
are marked non-seekable, but e.g. their read implementation actually
depends on knowing current position to correctly handle the read. Some
examples:
kernel/power/user.c snapshot_read
fs/debugfs/file.c u32_array_read
fs/fuse/control.c fuse_conn_waiting_read + ...
drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read
arch/s390/hypfs/inode.c hypfs_read_iter
...
Despite that, many nonseekable_open users implement read and write with
pure stream semantics - they don't depend on passed ppos at all. And for
those cases where read could wait for something inside, it creates a
situation similar to xenbus - the write could be never made to go until
read is done, and read is waiting for some, potentially external, event,
for potentially unbounded time -> deadlock.
Besides xenbus, there are 14 such places in the kernel that I've found
with semantic patch (see below):
drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write()
drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write()
drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write()
drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write()
net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write()
drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write()
drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write()
drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write()
net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write()
drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write()
drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write()
drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write()
drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write()
drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write()
In addition to the cases above another regression caused by f_pos
locking is that now FUSE filesystems that implement open with
FOPEN_NONSEEKABLE flag, can no longer implement bidirectional
stream-like files - for the same reason as above e.g. read can deadlock
write locking on file.f_pos in the kernel.
FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse:
implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp
in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and
write routines not depending on current position at all, and with both
read and write being potentially blocking operations:
See
https://github.com/libfuse/osspd
https://lwn.net/Articles/308445
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477
https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510
Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as
"somewhat pipe-like files ..." with read handler not using offset.
However that test implements only read without write and cannot exercise
the deadlock scenario:
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163
https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216
I've actually hit the read vs write deadlock for real while implementing
my FUSE filesystem where there is /head/watch file, for which open
creates separate bidirectional socket-like stream in between filesystem
and its user with both read and write being later performed
simultaneously. And there it is semantically not easy to split the
stream into two separate read-only and write-only channels:
https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169
Let's fix this regression. The plan is:
1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS -
doing so would break many in-kernel nonseekable_open users which
actually use ppos in read/write handlers.
2. Add stream_open() to kernel to open stream-like non-seekable file
descriptors. Read and write on such file descriptors would never use
nor change ppos. And with that property on stream-like files read and
write will be running without taking f_pos lock - i.e. read and write
could be running simultaneously.
3. With semantic patch search and convert to stream_open all in-kernel
nonseekable_open users for which read and write actually do not
depend on ppos and where there is no other methods in file_operations
which assume @offset access.
4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via
steam_open if that bit is present in filesystem open reply.
It was tempting to change fs/fuse/ open handler to use stream_open
instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but
grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE,
and in particular GVFS which actually uses offset in its read and
write handlers
https://codesearch.debian.net/search?q=-%3Enonseekable+%3D
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346
https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481
so if we would do such a change it will break a real user.
5. Add stream_open and FOPEN_STREAM handling to stable kernels starting
from v3.14+ (the kernel where 9c225f2655 first appeared).
This will allow to patch OSSPD and other FUSE filesystems that
provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE
in their open handler and this way avoid the deadlock on all kernel
versions. This should work because fs/fuse/ ignores unknown open
flags returned from a filesystem and so passing FOPEN_STREAM to a
kernel that is not aware of this flag cannot hurt. In turn the kernel
that is not aware of FOPEN_STREAM will be < v3.14 where just
FOPEN_NONSEEKABLE is sufficient to implement streams without read vs
write deadlock.
This patch adds stream_open, converts /proc/xen/xenbus to it and adds
semantic patch to automatically locate in-kernel places that are either
required to be converted due to read vs write deadlock, or that are just
safe to be converted because read and write do not use ppos and there
are no other funky methods in file_operations.
Regarding semantic patch I've verified each generated change manually -
that it is correct to convert - and each other nonseekable_open instance
left - that it is either not correct to convert there, or that it is not
converted due to current stream_open.cocci limitations.
The script also does not convert files that should be valid to convert,
but that currently have .llseek = noop_llseek or generic_file_llseek for
unknown reason despite file being opened with nonseekable_open (e.g.
drivers/input/mousedev.c)
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Yongzhi Pan <panyongzhi@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Nikolaus Rath <Nikolaus@rath.org>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge misc fixes from Andrew Morton:
"14 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kernel/sysctl.c: fix out-of-bounds access when setting file-max
mm/util.c: fix strndup_user() comment
sh: fix multiple function definition build errors
MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM
MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM
mm: writeback: use exact memcg dirty counts
psi: clarify the units used in pressure files
mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()
hugetlbfs: fix memory leak for resv_map
mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()
lib/lzo: fix bugs for very short or empty input
include/linux/bitrev.h: fix constant bitrev
kmemleak: powerpc: skip scanning holes in the .bss section
lib/string.c: implement a basic bcmp
|
|
When mknod is used to create a block special file in hugetlbfs, it will
allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc().
inode->i_mapping->private_data will point the newly allocated resv_map.
However, when the device special file is opened bd_acquire() will set
inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the
allocated resv_map is lost and the structure is leaked.
Programs to reproduce:
mount -t hugetlbfs nodev hugetlbfs
mknod hugetlbfs/dev b 0 0
exec 30<> hugetlbfs/dev
umount hugetlbfs/
resv_map structures are only needed for inodes which can have associated
page allocations. To fix the leak, only allocate resv_map for those
inodes which could possibly be associated with page allocations.
Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Yufen Yu <yuyufen@huawei.com>
Suggested-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After this commit
f875a79 nfsd: allow nfsv3 readdir request to be larger.
nfsv3 readdir request size can be larger than PAGE_SIZE. So if the
directory been read is large enough, we can use multiple pages
in rq_respages. Update buffer count and page pointers like we do
in readdirplus to make this happen.
Now listing a directory within 3000 files will panic because we
are counting in a wrong way and would write on random page.
Fixes: f875a79 "nfsd: allow nfsv3 readdir request to be larger"
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull syscall-get-arguments cleanup and fixes from Steven Rostedt:
"Andy Lutomirski approached me to tell me that the
syscall_get_arguments() implementation in x86 was horrible and gcc
certainly gets it wrong.
He said that since the tracepoints only pass in 0 and 6 for i and n
repectively, it should be optimized for that case. Inspecting the
kernel, I discovered that all users pass in 0 for i and only one file
passing in something other than 6 for the number of arguments. That
code happens to be my own code used for the special syscall tracing.
That can easily be converted to just using 0 and 6 as well, and only
copying what is needed. Which is probably the faster path anyway for
that case.
Along the way, a couple of real fixes came from this as the
syscall_get_arguments() function was incorrect for csky and riscv.
x86 has been optimized to for the new interface that removes the
variable number of arguments, but the other architectures could still
use some loving and take more advantage of the simpler interface"
* tag 'trace-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
syscalls: Remove start and number from syscall_set_arguments() args
syscalls: Remove start and number from syscall_get_arguments() args
csky: Fix syscall_get_arguments() and syscall_set_arguments()
riscv: Fix syscall_get_arguments() and syscall_set_arguments()
tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments()
ptrace: Remove maxargs from task_current_syscall()
|
|
memory allocated by kmem_cache_alloc() should be freed using
kmem_cache_free(), not kfree().
Fixes: fa0ca2aee3be ("deal with get_reqs_available() in aio_get_req() itself")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The compression property resets to NULL, instead of the old value if we
fail to set the new compression parameter.
$ btrfs prop get /btrfs compression
compression=lzo
$ btrfs prop set /btrfs compression zli
ERROR: failed to set compression for /btrfs: Invalid argument
$ btrfs prop get /btrfs compression
This is because the compression property ->validate() is successful for
'zli' as the strncmp() used the length passed from the userspace.
Fix it by using the expected string length in strncmp().
Fixes: 63541927c8d1 ("Btrfs: add support for inode properties")
Fixes: 5c1aab1dd544 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We let pass zstd compression parameter even if it is not fully valid.
For example:
$ btrfs prop set /btrfs compression zst
$ btrfs prop get /btrfs compression
compression=zst
zlib and lzo are fine.
Fix it by checking the correct prefix length.
Fixes: 5c1aab1dd544 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
task_current_syscall() has a single user that passes in 6 for maxargs, which
is the maximum arguments that can be used to get system calls from
syscall_get_arguments(). Instead of passing in a number of arguments to
grab, just get 6 arguments. The args argument even specifies that it's an
array of 6 items.
This will also allow changing syscall_get_arguments() to not get a variable
number of arguments, but always grab 6.
Linus also suggested not passing in a bunch of arguments to
task_current_syscall() but to instead pass in a pointer to a structure, and
just fill the structure. struct seccomp_data has almost all the parameters
that is needed except for the stack pointer (sp). As seccomp_data is part of
uapi, and I'm afraid to change it, a new structure was created
"syscall_info", which includes seccomp_data and adds the "sp" field.
Link: http://lkml.kernel.org/r/20161107213233.466776454@goodmis.org
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This accidentally returns the wrong variable. The "req->ki_eventfd"
pointer is NULL so this return success.
Fixes: 7316b49c2a11 ("aio: move sanity checks and request allocation to io_submit_one()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Will Deacon reported the following KASAN complaint:
[ 149.890370] ==================================================================
[ 149.891266] BUG: KASAN: double-free or invalid-free in io_sqe_files_unregister+0xa8/0x140
[ 149.892218]
[ 149.892411] CPU: 113 PID: 3974 Comm: io_uring_regist Tainted: G B 5.1.0-rc3-00012-g40b114779944 #3
[ 149.893623] Hardware name: linux,dummy-virt (DT)
[ 149.894169] Call trace:
[ 149.894539] dump_backtrace+0x0/0x228
[ 149.895172] show_stack+0x14/0x20
[ 149.895747] dump_stack+0xe8/0x124
[ 149.896335] print_address_description+0x60/0x258
[ 149.897148] kasan_report_invalid_free+0x78/0xb8
[ 149.897936] __kasan_slab_free+0x1fc/0x228
[ 149.898641] kasan_slab_free+0x10/0x18
[ 149.899283] kfree+0x70/0x1f8
[ 149.899798] io_sqe_files_unregister+0xa8/0x140
[ 149.900574] io_ring_ctx_wait_and_kill+0x190/0x3c0
[ 149.901402] io_uring_release+0x2c/0x48
[ 149.902068] __fput+0x18c/0x510
[ 149.902612] ____fput+0xc/0x18
[ 149.903146] task_work_run+0xf0/0x148
[ 149.903778] do_notify_resume+0x554/0x748
[ 149.904467] work_pending+0x8/0x10
[ 149.905060]
[ 149.905331] Allocated by task 3974:
[ 149.905934] __kasan_kmalloc.isra.0.part.1+0x48/0xf8
[ 149.906786] __kasan_kmalloc.isra.0+0xb8/0xd8
[ 149.907531] kasan_kmalloc+0xc/0x18
[ 149.908134] __kmalloc+0x168/0x248
[ 149.908724] __arm64_sys_io_uring_register+0x2b8/0x15a8
[ 149.909622] el0_svc_common+0x100/0x258
[ 149.910281] el0_svc_handler+0x48/0xc0
[ 149.910928] el0_svc+0x8/0xc
[ 149.911425]
[ 149.911696] Freed by task 3974:
[ 149.912242] __kasan_slab_free+0x114/0x228
[ 149.912955] kasan_slab_free+0x10/0x18
[ 149.913602] kfree+0x70/0x1f8
[ 149.914118] __arm64_sys_io_uring_register+0xc2c/0x15a8
[ 149.915009] el0_svc_common+0x100/0x258
[ 149.915670] el0_svc_handler+0x48/0xc0
[ 149.916317] el0_svc+0x8/0xc
[ 149.916817]
[ 149.917101] The buggy address belongs to the object at ffff8004ce07ed00
[ 149.917101] which belongs to the cache kmalloc-128 of size 128
[ 149.919197] The buggy address is located 0 bytes inside of
[ 149.919197] 128-byte region [ffff8004ce07ed00, ffff8004ce07ed80)
[ 149.921142] The buggy address belongs to the page:
[ 149.921953] page:ffff7e0013381f00 count:1 mapcount:0 mapping:ffff800503417c00 index:0x0 compound_mapcount: 0
[ 149.923595] flags: 0x1ffff00000010200(slab|head)
[ 149.924388] raw: 1ffff00000010200 dead000000000100 dead000000000200 ffff800503417c00
[ 149.925706] raw: 0000000000000000 0000000080400040 00000001ffffffff 0000000000000000
[ 149.927011] page dumped because: kasan: bad access detected
[ 149.927956]
[ 149.928224] Memory state around the buggy address:
[ 149.929054] ffff8004ce07ec00: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 149.930274] ffff8004ce07ec80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 149.931494] >ffff8004ce07ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 149.932712] ^
[ 149.933281] ffff8004ce07ed80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 149.934508] ffff8004ce07ee00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 149.935725] ==================================================================
which is due to a failure in registrering a fileset. This frees the
ctx->user_files pointer, but doesn't clear it. When the io_uring
instance is later freed through the normal channels, we free this
pointer again. At this point it's invalid.
Ensure we clear the pointer when we free it for the error case.
Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It only means that we do not have a valid cached value for the
file_all_info structure.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
|
|
Reconnecting after server or network failure can be improved
(to maintain availability and protect data integrity) by allowing
the client to choose the default persistent (or resilient)
handle timeout in some use cases. Today we default to 0 which lets
the server pick the default timeout (usually 120 seconds) but this
can be problematic for some workloads. Add the new mount parameter
to cifs.ko for SMB3 mounts "handletimeout" which enables the user
to override the default handle timeout for persistent (mount
option "persistenthandles") or resilient handles (mount option
"resilienthandles"). Maximum allowed is 16 minutes (960000 ms).
Units for the timeout are expressed in milliseconds. See
section 2.2.14.2.12 and 2.2.31.3 of the MS-SMB2 protocol
specification for more information.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
|
|
Some servers (see MS-SMB2 protocol specification
section 3.3.5.15.1) expect that the FSCTL enumerate snapshots
is done twice, with the first query having EXACTLY the minimum
size response buffer requested (16 bytes) which refreshes
the snapshot list (otherwise that and subsequent queries get
an empty list returned). So had to add code to set
the maximum response size differently for the first snapshot
query (which gets the size needed for the second query which
contains the actual list of snapshots).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.19+
|
|
Fix a bug where we used to not initialize the cached fid structure at all
in open_shroot() if the open was successful but we did not get a lease.
This would leave the structure uninitialized and later when we close the handle
we would in close_shroot() try to kref_put() an uninitialized refcount.
Fix this by always initializing this structure if the open was successful
but only do the extra get() if we got a lease.
This extra get() is only used to hold the structure until we get a lease
break from the server at which point we will kref_put() it during lease
processing.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull aio race fixes and cleanups from Al Viro.
The aio code had more issues with error handling and races with the aio
completing at just the right (wrong) time along with freeing the file
descriptor when another thread closes the file.
Just a couple of these commits are the actual fixes: the others are
cleanups to either make the fixes simpler, or to make the code legible
and understandable enough that we hope there's no more fundamental races
hiding.
* 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aio: move sanity checks and request allocation to io_submit_one()
deal with get_reqs_available() in aio_get_req() itself
aio: move dropping ->ki_eventfd into iocb_destroy()
make aio_read()/aio_write() return int
Fix aio_poll() races
aio: store event at final iocb_put()
aio: keep io_event in aio_kiocb
aio: fold lookup_kiocb() into its sole caller
pin iocb through aio.
|
|
Pull symlink fixes from Al Viro:
"The ceph fix is already in mainline, Daniel's bpf fix is in bpf tree
(1da6c4d9140c "bpf: fix use after free in bpf_evict_inode"), the rest
is in here"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
debugfs: fix use-after-free on symlink traversal
ubifs: fix use-after-free on symlink traversal
jffs2: fix use-after-free on symlink traversal
|
|
symlink body shouldn't be freed without an RCU delay. Switch debugfs to
->destroy_inode() and use of call_rcu(); free both the inode and symlink
body in the callback. Similar to solution for bpf, only here it's even
more obvious that ->evict_inode() can be dropped.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Merge misc fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
fs: fs_parser: fix printk format warning
checkpatch: add %pt as a valid vsprintf extension
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
mm/memory_hotplug.c: fix notification in offline error path
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
fs/proc/kcore.c: make kcore_modules static
include/linux/list.h: fix list_is_first() kernel-doc
mm/debug.c: fix __dump_page when mapping->host is not set
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
include/linux/hugetlb.h: convert to use vm_fault_t
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
mm: add support for kmem caches in DMA32 zone
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
mm/hotplug: fix offline undo_isolate_page_range()
fs/open.c: allow opening only regular files during execve()
mailmap: add Changbin Du
mm/debug.c: add a cast to u64 for atomic64_read()
...
|
|
Pull block fixes from Jens Axboe:
"Small set of fixes that should go into this series. This contains:
- compat signal mask fix for io_uring (Arnd)
- EAGAIN corner case for direct vs buffered writes for io_uring
(Roman)
- NVMe pull request from Christoph with various little fixes
- sbitmap ws_active fix, which caused a perf regression for shared
tags (me)
- sbitmap bit ordering fix (Ming)
- libata on-stack DMA fix (Raymond)"
* tag 'for-linus-20190329' of git://git.kernel.dk/linux-block:
nvmet: fix error flow during ns enable
nvmet: fix building bvec from sg list
nvme-multipath: relax ANA state check
nvme-tcp: fix an endianess miss-annotation
libata: fix using DMA buffers on stack
io_uring: offload write to async worker in case of -EAGAIN
sbitmap: order READ/WRITE freed instance and setting clear bit
blk-mq: fix sbitmap ws_active for shared tags
io_uring: fix big-endian compat signal mask handling
blk-mq: update comment for blk_mq_hctx_has_pending()
blk-mq: use blk_mq_put_driver_tag() to put tag
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch to avoid choking on multipage bvecs in the messenger and a
small use-after-free fix"
* tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client:
ceph: fix use-after-free on symlink traversal
libceph: fix breakage caused by multipage bvecs
|
|
Pull xfs fixes from Darrick Wong:
"Here are a few fixes for some corruption bugs and uninitialized
variable problems. The few patches here have gone through a few days
worth of fstest runs with no new problems observed.
Changes since last update:
- Fix a bunch of static checker complaints about uninitialized
variables and insufficient range checks.
- Avoid a crash when incore extent map data are corrupt.
- Disallow FITRIM when we haven't recovered the log and know the
metadata are stale.
- Fix a data corruption when doing unaligned overlapping dio writes"
* tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: serialize unaligned dio writes against all other dio writes
xfs: prohibit fstrim in norecovery mode
xfs: always init bma in xfs_bmapi_write
xfs: fix btree scrub checking with regards to root-in-inode
xfs: dabtree scrub needs to range-check level
xfs: don't trip over uninitialized buffer on extent read of corrupted inode
|
|
Syzkaller reports:
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 5373 Comm: syz-executor.0 Not tainted 5.0.0-rc8+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:put_links+0x101/0x440 fs/proc/proc_sysctl.c:1599
Code: 00 0f 85 3a 03 00 00 48 8b 43 38 48 89 44 24 20 48 83 c0 38 48 89 c2 48 89 44 24 28 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 fe 02 00 00 48 8b 74 24 20 48 c7 c7 60 2a 9d 91
RSP: 0018:ffff8881d828f238 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff8881e01b1140 RCX: ffffffff8ee98267
RDX: 0000000000000007 RSI: ffffc90001479000 RDI: ffff8881e01b1178
RBP: dffffc0000000000 R08: ffffed103ee27259 R09: ffffed103ee27259
R10: 0000000000000001 R11: ffffed103ee27258 R12: fffffffffffffff4
R13: 0000000000000006 R14: ffff8881f59838c0 R15: dffffc0000000000
FS: 00007f072254f700(0000) GS:ffff8881f7100000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fff8b286668 CR3: 00000001f0542002 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
drop_sysctl_table+0x152/0x9f0 fs/proc/proc_sysctl.c:1629
get_subdir fs/proc/proc_sysctl.c:1022 [inline]
__register_sysctl_table+0xd65/0x1090 fs/proc/proc_sysctl.c:1335
br_netfilter_init+0xbc/0x1000 [br_netfilter]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f072254ec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f072254ec70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f072254f6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004
Modules linked in: br_netfilter(+) dvb_usb_dibusb_mc_common dib3000mc dibx000_common dvb_usb_dibusb_common dvb_usb_dw2102 dvb_usb classmate_laptop palmas_regulator cn videobuf2_v4l2 v4l2_common snd_soc_bd28623 mptbase snd_usb_usx2y snd_usbmidi_lib snd_rawmidi wmi libnvdimm lockd sunrpc grace rc_kworld_pc150u rc_core rtc_da9063 sha1_ssse3 i2c_cros_ec_tunnel adxl34x_spi adxl34x nfnetlink lib80211 i5500_temp dvb_as102 dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops udc_core lnbp22 leds_lp3952 hid_roccat_ryos s1d13xxxfb mtd vport_geneve openvswitch nf_conncount nf_nat_ipv6 nsh geneve udp_tunnel ip6_udp_tunnel snd_soc_mt6351 sis_agp phylink snd_soc_adau1761_spi snd_soc_adau1761 snd_soc_adau17x1 snd_soc_core snd_pcm_dmaengine ac97_bus snd_compress snd_soc_adau_utils snd_soc_sigmadsp_regmap snd_soc_sigmadsp raid_class hid_roccat_konepure hid_roccat_common hid_roccat c2port_duramar2150 core mdio_bcm_unimac iptable_security iptable_raw iptable_mangle
iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim devlink vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel joydev mousedev ide_pci_generic piix aesni_intel aes_x86_64 ide_core crypto_simd atkbd cryptd glue_helper serio_raw ata_generic pata_acpi i2c_piix4 floppy sch_fq_codel ip_tables x_tables ipv6 [last unloaded: lm73]
Dumping ftrace buffer:
(ftrace buffer empty)
---[ end trace 770020de38961fd0 ]---
A new dir entry can be created in get_subdir and its 'header->parent' is
set to NULL. Only after insert_header success, it will be set to 'dir',
otherwise 'header->parent' is set to NULL and drop_sysctl_table is called.
However in err handling path of get_subdir, drop_sysctl_table also be
called on 'new->header' regardless its value of parent pointer. Then
put_links is called, which triggers NULL-ptr deref when access member of
header->parent.
In fact we have multiple error paths which call drop_sysctl_table() there,
upon failure on insert_links() we also call drop_sysctl_table().And even
in the successful case on __register_sysctl_table() we still always call
drop_sysctl_table().This patch fix it.
Link: http://lkml.kernel.org/r/20190314085527.13244-1-yuehaibing@huawei.com
Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org> [3.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix printk format warning (seen on i386 builds) by using ptrdiff format
specifier (%t):
fs/fs_parser.c:413:6: warning: format `%lu' expects argument of type `long unsigned int', but argument 3 has type `int' [-Wformat=]
Link: http://lkml.kernel.org/r/19432668-ffd3-fbb2-af4f-1c8e48f6cc81@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix sparse warning:
fs/proc/kcore.c:591:19: warning:
symbol 'kcore_modules' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190320135417.13272-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: James Morse <james.morse@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that
we always grab cluster locks in order of increasing inode number.
Unfortunately, we forget to swap the inode record buffer head pointers
when we've done this, which leads to incorrect bookkeepping when we're
trying to make the two inodes have the same refcount tree.
This has the effect of causing filesystem shutdowns if you're trying to
reflink data from inode 100 into inode 97, where inode 100 already has a
refcount tree attached and inode 97 doesn't. The reflink code decides
to copy the refcount tree pointer from 100 to 97, but uses inode 97's
inode record to open the tree root (which it doesn't have) and blows up.
This issue causes filesystem shutdowns and metadata corruption!
Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia
Fixes: 29ac8e856cb369 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
syzbot is hitting lockdep warning [1] due to trying to open a fifo
during an execve() operation. But we don't need to open non regular
files during an execve() operation, for all files which we will need are
the executable file itself and the interpreter programs like /bin/sh and
ld-linux.so.2 .
Since the manpage for execve(2) says that execve() returns EACCES when
the file or a script interpreter is not a regular file, and the manpage
for uselib(2) says that uselib() can return EACCES, and we use
FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non
regular file is requested with FMODE_EXEC set.
Since this deadlock followed by khungtaskd warnings is trivially
reproducible by a local unprivileged user, and syzbot's frequent crash
due to this deadlock defers finding other bugs, let's workaround this
deadlock until we get a chance to find a better solution.
[1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce
Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Reported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com>
Fixes: 8924feff66f35fe2 ("splice: lift pipe_lock out of splice_to_pipe()")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Whan a filesystem is mounted with the nologreplay mount option, which
requires it to be mounted in RO mode as well, we can not allow discard on
free space inside block groups, because log trees refer to extents that
are not pinned in a block group's free space cache (pinning the extents is
precisely the first phase of replaying a log tree).
So do not allow the fitrim ioctl to do anything when the filesystem is
mounted with the nologreplay option, because later it can be mounted RW
without that option, which causes log replay to happen and result in
either a failure to replay the log trees (leading to a mount failure), a
crash or some silent corruption.
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Fixes: 96da09192cda ("btrfs: Introduce new mount option to disable tree log replay")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls
generated by ->setattr() ops for the purpose of expanding a file is
incorrect due to older documentation incorrectly describing the way the RPC
'FileLength' parameter is meant to work.
The older documentation says that this is the length the file is meant to
end up at the end of the operation; however, it was never implemented this
way in any of the servers, but rather the file is truncated down to this
before the write operation is effected, and never expanded to it (and,
indeed, it was renamed to 'TruncPos' in 2014).
Fix this by setting the position parameter to the new file length and doing
a zero-lengh write there.
The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file
it then mmaps. This can be tested by giving the following test program a
filename in an AFS directory:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
char *p;
int fd;
if (argc != 2) {
fprintf(stderr,
"Format: test-trunc-mmap <file>\n");
exit(2);
}
fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
if (ftruncate(fd, 0x140008) == -1) {
perror("ftruncate");
exit(1);
}
p = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
p[0] = 'a';
if (munmap(p, 4096) < 0) {
perror("munmap");
exit(1);
}
if (close(fd) < 0) {
perror("close");
exit(1);
}
exit(0);
}
Fixes: 31143d5d515e ("AFS: implement basic file write support")
Reported-by: Jonathan Billings <jsbillin@umich.edu>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
free the symlink body after the same RCU delay we have for freeing the
struct inode itself, so that traversal during RCU pathwalk wouldn't step
into freed memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable fixes:
- Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
- fix mount/umount race in nlmclnt.
- NFSv4.1 don't free interrupted slot on open
Bugfixes:
- Don't let RPC_SOFTCONN tasks time out if the transport is connected
- Fix a typo in nfs_init_timeout_values()
- Fix layoutstats handling during read failovers
- fix uninitialized variable warning"
* tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
SUNRPC: fix uninitialized variable warning
pNFS/flexfiles: Fix layoutstats handling during read failovers
NFS: Fix a typo in nfs_init_timeout_values()
SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected
NFSv4.1 don't free interrupted slot on open
NFS: fix mount/umount race in nlmclnt.
NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fsync fixes: i_size for truncate vs fsync, dio vs buffered during
snapshotting, remove complicated but incomplete assertion
- removed excessive warnigs, misreported device stats updates
- fix raid56 page mapping for 32bit arch
- fixes reported by static analyzer
* tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix assertion failure on fsync with NO_HOLES enabled
btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size
btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks
btrfs: raid56: properly unmap parity page in finish_parity_scrub()
btrfs: don't report readahead errors and don't update statistics
Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes
btrfs: remove WARN_ON in log_dir_items
Btrfs: fix incorrect file size after shrinking truncate and fsync
|
|
XFS applies more strict serialization constraints to unaligned
direct writes to accommodate things like direct I/O layer zeroing,
unwritten extent conversion, etc. Unaligned submissions acquire the
exclusive iolock and wait for in-flight dio to complete to ensure
multiple submissions do not race on the same block and cause data
corruption.
This generally works in the case of an aligned dio followed by an
unaligned dio, but the serialization is lost if I/Os occur in the
opposite order. If an unaligned write is submitted first and
immediately followed by an overlapping, aligned write, the latter
submits without the typical unaligned serialization barriers because
there is no indication of an unaligned dio still in-flight. This can
lead to unpredictable results.
To provide proper unaligned dio serialization, require that such
direct writes are always the only dio allowed in-flight at one time
for a particular inode. We already acquire the exclusive iolock and
drain pending dio before submitting the unaligned dio. Wait once
more after the dio submission to hold the iolock across the I/O and
prevent further submissions until the unaligned I/O completes. This
is heavy handed, but consistent with the current pre-submission
serialization for unaligned direct writes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
In case of direct write -EAGAIN will be returned if page cache was
previously populated. To avoid immediate completion of a request
with -EAGAIN error write has to be offloaded to the async worker,
like io_read() does.
Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
On big-endian architectures, the signal masks are differnet
between 32-bit and 64-bit tasks, so we have to use a different
function for reading them from user space.
io_cqring_wait() initially got this wrong, and always interprets
this as a native structure. This is ok on x86 and most arm64,
but not on s390, ppc64be, mips64be, sparc64 and parisc.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
