| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Currently there is no way to truncate partial page where the end
truncate point is not at the end of the page. This is because it was not
needed and the functionality was enough for file system truncate
operation to work properly. However more file systems now support punch
hole feature and it can benefit from mm supporting truncating page just
up to the certain point.
Specifically, with this functionality truncate_inode_pages_range() can
be changed so it supports truncating partial page at the end of the
range (currently it will BUG_ON() if 'end' is not at the end of the
page).
This commit changes the invalidatepage() address space operation
prototype to accept range to be invalidated and update all the instances
for it.
We also change the block_invalidatepage() in the same way and actually
make a use of the new length argument implementing range invalidation.
Actual file system implementations will follow except the file systems
where the changes are really simple and should not change the behaviour
in any way .Implementation for truncate_page_range() which will be able
to accept page unaligned ranges will follow as well.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Hugh Dickins <hughd@google.com>
|
|
Faster kernel compiles by way of fewer unnecessary includes.
[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
When stable pages are required, we have to wait if the page is just
going to disk and we want to modify it. Add proper callback to
ubifs_vm_page_mkwrite().
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().
Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.
Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com> #arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Join all the split printk lines in order to stop checkpatch complaining.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The pdflush thread is long gone, so this patch removes references to pdflush
from UBIFS comments.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This commit re-names all functions which dump something from "dbg_dump_*()" to
"ubifs_dump_*()". This is done for consistency with UBI and because this way it
will be more logical once we remove the debugging sompilation option.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Remove CONFIG_UBIFS_FS_XATTR configuration option and associated
UBIFS_FS_XATTR ifdefs.
Testing:
Tested using integck while using nandsim on x86 & MX28 based
platform with Micron MT29F2G08ABAEAH4 nand.
Signed-off-by: Subodh Nijsure <snijsure@grid-net.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Cong Wang <amwang@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
isofs: Remove global fs lock
jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
mm/truncate.c: fix build for CONFIG_BLOCK not enabled
fs:update the NOTE of the file_operations structure
Remove dead code in dget_parent()
AFS: Fix silly characters in a comment
switch d_add_ci() to d_splice_alias() in "found negative" case as well
simplify gfs2_lookup()
jfs_lookup(): don't bother with . or ..
get rid of useless dget_parent() in btrfs rename() and link()
get rid of useless dget_parent() in fs/btrfs/ioctl.c
fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
drivers: fix up various ->llseek() implementations
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
Ext4: handle SEEK_HOLE/SEEK_DATA generically
Btrfs: implement our own ->llseek
fs: add SEEK_HOLE and SEEK_DATA flags
reiserfs: make reiserfs default to barrier=flush
...
Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.
|
|
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add 'const struct ubifs_info *c' parameter to 'dbg_check_synced_i_size()'
function because we'll need it in the next patch when we switch to debugfs.
So this patch is just a preparation.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Remove the following commentary from 'ubifs_file_mmap()':
/* 'generic_file_mmap()' takes care of NOMMU case */
I do not understand what it means, and I could not find anything relater to
NOMMU in 'generic_file_mmap()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
We have our own flags indicating R/O mode, and c->ro_mode is equivalent
to MS_RDONLY. Let's be consistent and use UBIFS flags everywhere.
This patch is just a minor cleanup.
Additionally, add a comment that we are surprised with VFS behavior -
as a reminder to look at this some day.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch separates out all the budgeting-related information
from 'struct ubifs_info' to 'struct ubifs_budg_info'. This way the
code looks a bit cleaner. However, the main driver for this is
that we want to save budgeting information and print it later,
so a separate data structure for this is helpful.
This patch is a preparation for the further debugging output
improvements.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fix several minor stylistic issues:
* lines longer than 80 characters
* space before closing parenthesis ')'
* spaces in the indentations
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch fixes severe UBIFS bug: UBIFS oopses when we 'fsync()' an
file on R/O-mounter file-system. We (the UBIFS authors) incorrectly
thought that VFS would not propagate 'fsync()' down to the file-system
if it is read-only, but this is not the case.
It is easy to exploit this bug using the following simple perl script:
use strict;
use File::Sync qw(fsync sync);
die "File path is not specified" if not defined $ARGV[0];
my $path = $ARGV[0];
open FILE, "<", "$path" or die "Cannot open $path: $!";
fsync(\*FILE) or die "cannot fsync $path: $!";
close FILE or die "Cannot close $path: $!";
Thanks to Reuben Dowle <Reuben.Dowle@navico.com> for reporting about this
issue.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reported-by: Reuben Dowle <Reuben.Dowle@navico.com>
Cc: stable@kernel.org
|
|
This patch fixes the following UBIFS assertion warning:
UBIFS assert failed in do_readpage at 115 (pid 199)
[<b00321b8>] (unwind_backtrace+0x0/0xdc) from [<af025118>]
(do_readpage+0x108/0x594 [ubifs])
[<af025118>] (do_readpage+0x108/0x594 [ubifs]) from [<af025764>]
(ubifs_write_end+0x1c0/0x2e8 [ubifs])
[<af025764>] (ubifs_write_end+0x1c0/0x2e8 [ubifs]) from
[<b00a0164>] (generic_file_buffered_write+0x18c/0x270)
[<b00a0164>] (generic_file_buffered_write+0x18c/0x270) from
[<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0)
[<b00a08d4>] (__generic_file_aio_write+0x478/0x4c0) from
[<b00a0984>] (generic_file_aio_write+0x68/0xc8)
[<b00a0984>] (generic_file_aio_write+0x68/0xc8) from
[<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs])
[<af024a78>] (ubifs_aio_write+0x178/0x1d8 [ubifs]) from
[<b00d104c>] (do_sync_write+0xb0/0x100)
[<b00d104c>] (do_sync_write+0xb0/0x100) from [<b00d1abc>]
(vfs_write+0xac/0x154)
[<b00d1abc>] (vfs_write+0xac/0x154) from [<b00d1c10>]
(sys_write+0x3c/0x68)
[<b00d1c10>] (sys_write+0x3c/0x68) from [<b002d9a0>]
(ret_fast_syscall+0x0/0x2c)
The 'PG_checked' flag is used to indicate that the page does not
supposedly exist on the media (e.g., a hole or a page beyond the
inode size), so it requires slightly bigger budget, because we have
to account the indexing size increase. And this flag basically
tells that the budget for this page has to be "new page budget".
The "new page budget" is slightly bigger than the "existing page
budget".
The 'do_readpage()' function has the following assertion which
sometimes is hit: 'ubifs_assert(!PageChecked(page))'. Obviously,
the meaning of this assertion is: "I should not be asked to read
a page which does not exist on the media".
However, in 'ubifs_write_begin()' we have a small "trick". Notice,
that VFS may write pages which were not read yet, so the page data
were not loaded from the media to the page cache yet. If VFS tells
that it is going to change only some part of the page, we obviously
have to load it from the media. However, if VFS tells that it is
going to change whole page, we do not read it from the media for
optimization purposes.
However, since we do not read it, we do not know if it exists on
the media or not (a hole, etc). So we set the 'PG_checked' flag
to this page to force bigger budget, just in case.
So 'ubifs_write_begin()' sets 'PG_checked'. Then we are in
'ubifs_write_end()'. And VFS tells us: "hey, for some reasons I
changed my mind and did not change whole page". Frankly, I do not
know why this happens, but I hit this somehow on an ARM platform.
And this is extremely rare.
So in this case UBIFS does the following:
1. Cancels allocated budget.
2. Loads the page from the media by calling 'do_readpage()'.
3. Asks VFS to repeat the whole write operation from the very
beginning (call '->write_begin() again, etc).
And the assertion warning is hit at the step 2 - remember we have
the 'PG_checked' set for this page, and 'do_readpage()' does not
like this. So this patch fixes the problem by adding step 1.5 and
cleaning the 'PG_checked' before calling 'do_readpage()'.
All in all, this patch does not fix any functionality issue, but it
silences UBIFS false positive warning which may happen in very very
rare cases.
And while on it, this patch also improves a commentary which explains
the reasons of setting the 'PG_checked' flag for the page. The old
commentary was a bit difficult to understand.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Commit 2fde99cb55fb9d9b88180512a5e8a5d939d27fec "UBIFS: mark VFS SB RO too"
introduced regression. This commit made UBIFS set the 'MS_RDONLY' flag in the
VFS superblock when it switches to R/O mode due to an error. This was done
to make VFS show the R/O UBIFS flag in /proc/mounts.
However, several places in UBIFS relied on the 'MS_RDONLY' flag and assume this
flag can only change when we re-mount. For example, 'ubifs_put_super()'.
This patch introduces new UBIFS flag - 'c->ro_mount' which changes only when
we re-mount, and preserves the way UBIFS was originally mounted (R/W or R/O).
This allows us to de-initialize UBIFS cleanly in 'ubifs_put_super()'.
This patch also changes all 'ubifs_assert(!c->ro_media)' assertions to
'ubifs_assert(!c->ro_media && !c->ro_mount)', because we never should write
anything if the FS was mounter R/O.
All the places where we test for 'MS_RDONLY' flag in the VFS SB were changed
and now we test the 'c->ro_mount' flag instead, because it preserves the
original UBIFS mount type, unlike the 'MS_RDONLY' flag.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The R/O state may have various reasons:
1. The UBI volume is R/O
2. The FS is mounted R/O
3. The FS switched to R/O mode because of an error
However, in UBIFS we have only one variable which represents cases
1 and 3 - 'c->ro_media'. Indeed, we set this to 1 if we switch to
R/O mode due to an error, and then we test it in many places to
make sure that we stop writing as soon as the error happens.
But this is very unclean. One consequence of this, for example, is
that in 'ubifs_remount_fs()' we use 'c->ro_media' to check whether
we are in R/O mode because on an error, and we print a message
in this case. However, if we are in R/O mode because the media
is R/O, our message is bogus.
This patch introduces new flag - 'c->ro_error' which is set when
we switch to R/O mode because of an error. It also changes all
"if (c->ro_media)" checks to "if (c->ro_error)" checks, because
this is what the checks actually mean. We do not need to check
for 'c->ro_media' because if the UBI volume is in R/O mode, we
do not allow R/W mounting, and now writes can happen. This is
guaranteed by VFS. But it is good to double-check this, so this
patch also adds many "ubifs_assert(!c->ro_media)" checks.
In the 'ubifs_remount_fs()' function this patch makes a bit more
changes - it fixes the error messages as well.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok. Also clean up and document inode_change_ok
to make this obvious.
As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error. This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere. Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.
Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.
Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Lots of filesystems calls vmtruncate despite not implementing the old
->truncate method. Switch them to use simple_setsize and add some
comments about the truncate code where it seems fitting.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
|
|
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
After I_SYNC was split from I_LOCK the leftover is always used together with
I_NEW and thus superflous.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
generic_file_aio_write already calls into ->fsync to handle O_SYNC/O_DSYNC.
Remove the duplicate call to ubifs_sync_wbufs_by_inode which is already
covered by ubifs_fsync.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code
But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch amends and nicifies commentaries in file.c, as well as
fixes some spelling problems.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: fix recovery bug
UBIFS: add R/O compatibility
UBIFS: fix compiler warnings
UBIFS: fully sort GCed nodes
UBIFS: fix commentaries
UBIFS: introduce a helpful variable
UBIFS: use KERN_CONT
UBIFS: fix lprops committing bug
UBIFS: fix bogus assertion
UBIFS: fix bug where page is marked uptodate when out of space
UBIFS: amend key_hash return value
UBIFS: improve find function interface
UBIFS: list usage cleanup
UBIFS: fix dbg_chk_lpt_sz()
|
|
Change the page_mkwrite prototype to take a struct vm_fault, and return
VM_FAULT_xxx flags. There should be no functional change.
This makes it possible to return much more detailed error information to
the VM (and also can provide more information eg. virtual_address to the
driver, which might be important in some special cases).
This is required for a subsequent fix. And will also make it easier to
merge page_mkwrite() with fault() in future.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <joel.becker@oracle.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
UBIFS fast path in write_begin may mark a page up to date
and then discover that there may not be enough space to do
the write, and so fall back to a slow path. The slow path
tries harder, but may still find no space - leaving the page
marked up to date, when it is not. This patch ensures that
the page is marked not up to date in that case.
The bug that this patch fixes becomes evident when the write
is into a hole (sparse file) or is at the end of the file
and a subsequent read is off the end of the file. In both
cases, the file system should return zeros but was instead
returning the page that had not been written because the
file system was out of space.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
We observe space corrupted accounting when re-mounting. So add some
debbugging checks to catch problems like this.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Mark super, file, and inode operation structcutes with 'const'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
These are mostly long lines and wrong indentation warning
fixes. But also there are two volatile variables and
checkpatch.pl complains about them:
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
+ volatile int gc_seq;
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
+ volatile int gced_lnum;
Well, we anyway use smp_wmb() for c->gc_seq and c->gced_lnum, so
these 'volatile' modifiers can be just dropped.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
It has high bits set, not low bits set as the UBIFS code
assumed.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
To avoid memory allocation failure during bulk-read, pre-allocate
a bulk-read buffer, so that if there is only one bulk-reader at
a time, it would just use the pre-allocated buffer and would not
do any memory allocation. However, if there are more than 1 bulk-
reader, then only one reader would use the pre-allocated buffer,
while the other reader would allocate the buffer for itself.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Bulk-read allocates 128KiB or more using kmalloc. The allocation
starts failing often when the memory gets fragmented. UBIFS still
works fine in this case, because it falls-back to standard
(non-optimized) read method, though. This patch teaches bulk-read
to allocate exactly the amount of memory it needs, instead of
allocating 128KiB every time.
This patch is also a preparation to the further fix where we'll
have a pre-allocated bulk-read buffer as well. For example, now
the @bu object is prepared in 'ubifs_bulk_read()', so we could
path either pre-allocated or allocated information to
'ubifs_do_bulk_read()' later. Or teaching 'ubifs_do_bulk_read()'
not to allocate 'bu->buf' if it is already there.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Bulk-read allocates a lot of memory with 'kmalloc()', and when it
is/gets fragmented 'kmalloc()' fails with a scarry warning. But
because bulk-read is just an optimization, UBIFS keeps working fine.
Supress the warning by passing __GFP_NOWARN option to 'kmalloc()'.
This patch also introduces a macro for the magic 128KiB constant.
This is just neater.
Note, this is not really fixes the problem we had, but just hides
the warnings. The further patches fix the problem.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Noticed by sparse:
fs/ubifs/file.c:75:2: warning: restricted __le64 degrades to integer
fs/ubifs/file.c:629:4: warning: restricted __le64 degrades to integer
fs/ubifs/dir.c:431:3: warning: restricted __le64 degrades to integer
This should be checked to ensure the ubifs_assert is working as
intended, I've done the suggested annotation in this patch.
fs/ubifs/sb.c:298:6: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:298:6: expected int [signed] [assigned] tmp
fs/ubifs/sb.c:298:6: got restricted __le64 [usertype] <noident>
fs/ubifs/sb.c:299:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:299:19: expected restricted __le64 [usertype] atime_sec
fs/ubifs/sb.c:299:19: got int [signed] [assigned] tmp
fs/ubifs/sb.c:300:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:300:19: expected restricted __le64 [usertype] ctime_sec
fs/ubifs/sb.c:300:19: got int [signed] [assigned] tmp
fs/ubifs/sb.c:301:19: warning: incorrect type in assignment (different base types)
fs/ubifs/sb.c:301:19: expected restricted __le64 [usertype] mtime_sec
fs/ubifs/sb.c:301:19: got int [signed] [assigned] tmp
This looks like a bugfix as your tmp was a u32 so there was truncation in
the atime, mtime, ctime value, probably not intentional, add a tmp_le64
and use it here.
fs/ubifs/key.h:348:9: warning: cast to restricted __le32
fs/ubifs/key.h:348:9: warning: cast to restricted __le32
fs/ubifs/key.h:419:9: warning: cast to restricted __le32
Read from the annotated union member instead.
fs/ubifs/recovery.c:175:13: warning: incorrect type in assignment (different base types)
fs/ubifs/recovery.c:175:13: expected unsigned int [unsigned] [usertype] save_flags
fs/ubifs/recovery.c:175:13: got restricted __le32 [usertype] flags
fs/ubifs/recovery.c:186:13: warning: incorrect type in assignment (different base types)
fs/ubifs/recovery.c:186:13: expected restricted __le32 [usertype] flags
fs/ubifs/recovery.c:186:13: got unsigned int [unsigned] [usertype] save_flags
Do byteshifting at compile time of the flag value. Annotate the saved_flags
as le32.
fs/ubifs/debug.c:368:10: warning: cast to restricted __le32
fs/ubifs/debug.c:368:10: warning: cast from restricted __le64
Should be checked if the truncation was intentional, I've changed the
printk to print the full width.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Bulk-read skips uptodate pages but this was putting its
array index out and causing it to treat subsequent pages
as holes.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Some flash media are capable of reading sequentially at faster rates.
UBIFS bulk-read facility is designed to take advantage of that, by
reading in one go consecutive data nodes that are also located
consecutively in the same LEB.
Read speed on Arm platform with OneNAND goes from 17 MiB/s to
19 MiB/s.
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Always allow truncations to zero, even if budgeting thinks there
is no space. UBIFS reserves some space for deletions anyway.
Otherwise, the following happans:
1. create a file, and write as much as possible there, until ENOSPC
2. truncate the file, which fails with ENOSPC, which is not good.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
UBIFS aligns node lengths to 8, so budgeting has to do the
same. Well, direntry, inode, and page budgets are already
aligned, but not inode data budget (e.g., data in special
devices or symlinks). Do this for inode data as well.
Also, add corresponding debugging checks.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
