summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-11-01clk: mmp: mmp2: fix return value check in mmp2_clk_init()Wei Yongjun1-1/+1
Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qoriq: Don't allow CPU clocks higher than starting valueScott Wood1-5/+8
The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood <oss@buserror.net> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01Merge tag 'v4.9-rockchip-clkfixes1' of ↵Stephen Boyd1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Fix return value in error case of new ddrclk type. * tag 'v4.9-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: don't return NULL when failing to register ddrclk branch
2016-11-01clk: imx: fix integer overflow in AV PLL round rateEmil Lundmark1-2/+6
Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang <b20788@freescale.com> Signed-off-by: Emil Lundmark <emil@limesaudio.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-28clk: xgene: Don't call __pa on ioremaped addressLaura Abbott1-6/+4
ioremaped addresses are not linearly mapped so the physical address can not be figured out via __pa. More generally, there is no guarantee that backing value of an ioremapped address is a physical address at all. The value here is only used for debugging so just drop the call to __pa on the ioremapped address. Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings") Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Loc Ho <lho@apm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-27clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUTMarek Szyprowski1-8/+14
The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-20clk: at91: Fix a return value in case of errorChristophe JAILLET1-1/+1
If 'clk_hw_register()' fails, it is likely that we expect to return an error instead of a valid pointer (which would mean success). Fix commit f5644f10dcfb ("clk: at91: Migrate to clk_hw based registration and OF APIs") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCsMasahiro Yamada3-9/+9
I made a mistake as for naming for this block. The MIO block is not implemented for these 3 SoCs in the first place. The current naming will be a trouble if an SoC with both MIO and SD-ctrl blocks appear in the future. This driver has just been merged in the previous merge window. Rename it before the release. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: uniphier: fix memory overrun bugMasahiro Yamada1-1/+1
The first loop of this "for" statement writes memory beyond the allocated clk_hw_onecell_data. It should be: for (clk_num--; clk_num >= 0; clk_num--) ... Or more simply: while (--clk_num >= 0) ... Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: hi6220: use CLK_OF_DECLARE_DRIVER for sysctrl and mediactrl clock initShawn Guo1-2/+2
The hi6220-sysctrl and hi6220-mediactrl are not only clock provider but also reset controller. It worked fine that single sysctrl/mediactrl device node in DT can be used to initialize clock driver and populate platform device for reset controller. But it stops working after commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") gets merged. The commit sets flag OF_POPULATED during clock initialization to skip the platform device populating for the same device node. On hi6220, it effectively makes hi6220-sysctrl reset driver not probe any more. The patch changes hi6220 sysctrl and mediactrl clock init macro from CLK_OF_DECLARE to CLK_OF_DECLARE_DRIVER, so that the reset driver using the same hardware block can continue working. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mvebu: armada-37xx-periph: Fix the clock gate flagGregory CLEMENT1-0/+1
For the gate part of the peripheral clock setting the bit disables the clock and clearing it enables the clock. This is not the default behavior of clk_gate component, so we need to use the CLK_GATE_SET_TO_DISABLE flag. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.Eric Anholt1-7/+4
Fixes setting low-resolution video modes on HDMI. Now the PLLH_PIX divider adjusts itself until the PLLH is within bounds. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: max77686: fix number of clocks setup for clk_hw based registrationJavier Martinez Canillas1-0/+1
The commit 9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs") converted the driver to use the new provider API to register clocks using clk_hw. But unfortunately, in the conversion it missed to set the num_clks value which lead to the following error when trying to register a clk provider: [ 1.963782] of_clk_max77686_get: invalid index 0 [ 1.967460] ERROR: could not get clock /rtc@10070000:rtc_src(1) [ 1.973638] s3c-rtc 10070000.rtc: failed to find rtc source clock Fix it by correctly set the max77686_clk_driver_data num_clks member. Fixes: 9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mvebu: armada-37xx-periph: Fix the clock provider registrationGregory CLEMENT1-5/+5
While trying using a peripheral clock on a driver, I saw that the clock pointer returned by the provider was NULL. The problem was a missing indirection. It was the pointer stored in the hws array which needed to be updated not the value it contains. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mediatek: Add hardware dependencyJean Delvare1-0/+2
Only propose the mediatek clock drivers on this platform, unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Shunli Wang <shunli.wang@mediatek.com> Cc: James Liao <jamesjj.liao@mediatek.com> Cc: Erin Lo <erin.lo@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: samsung: clk-exynos-audss: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias alias: platform:exynos-audss-clk After this patch: $ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias alias: platform:exynos-audss-clk alias: of:N*T*Csamsung,exynos5420-audss-clockC* alias: of:N*T*Csamsung,exynos5420-audss-clock alias: of:N*T*Csamsung,exynos5410-audss-clockC* alias: of:N*T*Csamsung,exynos5410-audss-clock alias: of:N*T*Csamsung,exynos5250-audss-clockC* alias: of:N*T*Csamsung,exynos5250-audss-clock alias: of:N*T*Csamsung,exynos4210-audss-clockC* alias: of:N*T*Csamsung,exynos4210-audss-clock Fixes: 4d252fd5719b ("clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: uniphier: fix type of variable passed to regmap_read()Masahiro Yamada1-1/+1
The 3rd argument of regmap_read() takes a pointer to unsigned int. This driver is saved just because u32 happens to be typedef'ed as unsigned int, but we should not rely on that fact. Change the variable type just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: uniphier: add system clock support for sLD3 SoCMasahiro Yamada1-0/+4
I do not know why, but I missed to add this compatible string in the initial commit of this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-16clk: rockchip: don't return NULL when failing to register ddrclk branchShawn Lin1-4/+1
rockchip_clk_register_ddrclk should not return NULL when failing to call clk_register, otherwise rockchip_clk_register_branches prints "unknown clock type". The actual case is that it's a known clock type but we fail to register it, which may makes user confuse the reason of failure. And the pr_err here is pointless as rockchip_clk_register_branches will also print the similar message. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-15Merge tag 'gcc-plugins-v4.9-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds11-255/+467
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-14Merge tag 'linux-kselftest-4.9-rc1-update' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: "This update consists of: - Fixes and improvements to existing tests - Moving code from Documentation to selftests, samples, and tools: * Moves dnotify_test, prctl, ptp, vDSO, ia64, watchdog, and networking tests from Documentation to selftests. * Moves mic/mpssd, misc-devices/mei, timers, watchdog, auxdisplay, and blackfin examples from Documentation to samples. * Moves accounting, laptops/dslm, and pcmcia/crc32hash tools from Documentation to tools. * Deletes BUILD_DOCSRC and its dependencies" * tag 'linux-kselftest-4.9-rc1-update' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (21 commits) selftests/futex: Check ANSI terminal color support Doc: update 00-INDEX files to reflect the runnable code move samples: move blackfin gptimers-example from Documentation tools: move pcmcia crc32hash tool from Documentation tools: move laptops dslm tool from Documentation tools: move accounting tool from Documentation samples: move auxdisplay example code from Documentation samples: move watchdog example code from Documentation samples: move timers example code from Documentation samples: move misc-devices/mei example code from Documentation samples: move mic/mpssd example code from Documentation selftests: Move networking/timestamping from Documentation selftests: move watchdog tests from Documentation/watchdog selftests: move ia64 tests from Documentation/ia64 selftests: move vDSO tests from Documentation/vDSO selftests: move ptp tests from Documentation/ptp selftests: move prctl tests from Documentation/prctl selftests: move dnotify_test from Documentation/filesystems selftests/timers: Add missing error code assignment before test selftests/zram: replace ZRAM_LZ4_COMPRESS ...
2016-10-14Merge tag 'for-linus' of ↵Linus Torvalds13-11/+6557
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma qedr RoCE driver from Doug Ledford: "Early on in the merge window I mentioned I had a backlog of new drivers waiting to be reviewed and that, in addition to the hns-roce driver, I wanted to get possible a couple more reviewed. I ended up only having the time to complete one of the additional drivers. During Dave Miller's pull request this go around, there were a series of 9 patches to the QLogic qed net driver that add basic support for a paired RoCE driver. That support is currently not functional because it is missing the matching RoCE driver in the RDMA subsystem. I managed to finish that review. However, because it goes against part of Dave's net pull, and a part that was accepted a day or two after the merge window opened, to apply cleanly it has to be applied to either the tip of Dave's net branch, or as I did in this case, I just applied it to your master after you had taken Dave's pull request." * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: qedr: Add events support and register IB device qedr: Add GSI support qedr: Add LL2 RoCE interface qedr: Add support for data path qedr: Add support for memory registeration verbs qedr: Add support for QP verbs qedr: Add support for PD,PKEY and CQ verbs qedr: Add support for user context verbs qedr: Add support for RoCE HW init qedr: Add RoCE driver framework
2016-10-14Merge tag 'for-linus-2' of ↵Linus Torvalds21-369/+503
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull more rdma updates from Doug Ledford: "This merge window was the first where Huawei had to try and coordinate their patches between their net driver and their new roce driver (similar to mlx4 and mlx5). They didn't do horribly, but there were some issues (and we knew that because they simply didn't know what to do in the beginning). As a result, I had a set of patches that depended on some patches that normally would have come to you via Dave's tree. Those patches have been on netdev@ for a while, so I got Dave to give me his approval to send them to you. As such, the other 29 patches I had behind them are also now ready to go. This catches the hns and hns-roce drivers up to current, and for future patches we are working with them to get them up to speed on how to do joint driver development so that they don't have these sorts of cross tree dependency issues again. BTW, Dave gave me permission to add his Acked-by: to the patches against the net tree, but I've had this branch through 0day (but not linux-next since it was off by itself) and I didn't want to rebase the series just to add Dave's ack for the 8 patches in the net area. Updates to the hns drivers: - Small patch set for hns net driver that the roce patches depend on - Various fixes to the hns-roce driver - Add connection manager support to the hns-roce driver" * tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (36 commits) IB/hns: Fix for removal of redundant code IB/hns: Delete the redundant lines in hns_roce_v1_m_qp() IB/hns: Fix the bug when platform_get_resource() exec fail IB/hns: Update the rq head when modify qp state IB/hns: Cq has not been freed IB/hns: Validate mtu when modified qp IB/hns: Some items of qpc need to take user param IB/hns: The Ack timeout need a lower limit value IB/hns: Return bad wr while post send failed IB/hns: Fix bug of memory leakage for registering user mr IB/hns: Modify the init of iboe lock IB/hns: Optimize code of aeq and ceq interrupt handle and fix the bug of qpn IB/hns: Delete the sqp_start from the structure hns_roce_caps IB/hns: Fix bug of clear hem IB/hns: Remove unused parameter named qp_type IB/hns: Simplify function of pd alloc and qp alloc IB/hns: Fix bug of using uninit refcount and free IB/hns: Remove parameters of resize cq IB/hns: Remove unused parameters in some functions IB/hns: Add node_guid definition to the bindings document ...
2016-10-14Merge branch 'for-linus' of ↵Linus Torvalds13-58/+317
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull some more input subsystem updates from Dmitry Torokhov: "An update to the ALPS driver to support the V8 protocol with touchstick, a change for i8042 to skip selftest on many Asus laptops which helps to keep their touchpads working after resume, and a couple other driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: i8042 - skip selftest on ASUS laptops Input: melfas_mip4 - add ic_name sysfs attribute Input: melfas_mip4 - add maintainer information Input: melfas_mip4 - add devicetree binding documentations Input: elantech - add Fujitsu Lifebook E556 to force crc_enabled Input: synaptics-rmi4 - fix error handling in I2C transport driver Input: synaptics-rmi4 - fix error handling in SPI transport driver Input: ALPS - add V8 protocol documentation Input: ALPS - set DualPoint flag for 74 03 28 devices Input: ALPS - allow touchsticks to report pressure Input: ALPS - handle 0-pressure 1F events Input: ALPS - add touchstick support for SS5 hardware Input: elantech - force needed quirks on Fujitsu H760 Input: elantech - fix Lenovo version typo
2016-10-14Merge tag 'rtc-4.9' of ↵Linus Torvalds32-780/+453
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "RTC for 4.9 Subsystem: - delete owner assignment in multiple drivers - constify rtc_class_ops structures Drivers: - ac100: support clock-output-names - cmos: properly handle ACPI alarms and quirky BIOSes and other fixes - ds1307: fix century bit support while staying comaptible with previous behaviour by default - ds1347: switch to regmap - isl12057 is now handled by ds1307 - omap: support external wakeup - rv8803: allow to disable voltage drop detection" * tag 'rtc-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (25 commits) rtc: rv8803: set VDETOFF and SWOFF via device tree dt/bindings: Add bindings for Micro Crystal rv8803 devicetree: Add Micro Crystal AG vendor id rtc: cmos: avoid unused function warning rtc: ac100: Add NULL checking for devm_kzalloc call rtc: ds1347: changed raw spi calls to register map calls rtc: cmos: Restore alarm after resume rtc: cmos: Clear ACPI-driven alarms upon resume rtc: omap: Support ext_wakeup configuration rtc: cmos: Initialize hpet timer before irq is registered rtc: asm9260: rework locking rtc: asm9260: allow COMPILE_TEST rtc: constify rtc_class_ops structures rtc: ac100: support clock-output-names in device tree binding rtc: rx6110: remove owner assignment rtc: pic32: Delete owner assignment rtc: bq32k: Fix handling of oscillator failure flag rtc: bq32k: Use correct mask name for 'minutes' register. rtc: sysfs: fix a cast removing the const attribute Documentation: dt: Intersil isl12057 is not a trivial device ...
2016-10-14Merge branch 'i2c/for-next' of ↵Linus Torvalds2-2/+24
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull more i2c updates from Wolfram Sang: "A small update pull request from I2C. This adds one comment to a change we did in this merge window to handle lockdep better, and pulls in a branch which should have been in 4.8 already improving DT support for I2C" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: gpio: pca953x: add a comment explaining the need for a lockdep subclass i2c: core: Add support for 'i2c-bus' subnode dt-bindings: i2c: Add support for 'i2c-bus' subnode
2016-10-14Merge tag 'acpi-extra-4.9-rc1' of ↵Linus Torvalds5-53/+96
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "This includes a couple of fixes needed after recent changes, two ACPI driver fixes (fan and "Processor Aggregator"), an update of the ACPI device properties handling code and a new MAINTAINERS entry for ACPI on ARM64. Specifics: - Fix an unused function warning that started to appear after recent changes in the ACPI EC driver (Eric Biggers). - Fix the KERN_CONT usage in acpi_os_vprintf() that has become (particularly) annoying recently (Joe Perches). - Fix the fan status checking in the ACPI fan driver to avoid returning incorrect error codes sometimes (Srinivas Pandruvada). - Fix the ACPI Processor Aggregator driver (PAD) to always let the special processor_aggregator driver from Xen take over when running as Xen dom0 (Juergen Gross). - Update the handling of reference device properties in ACPI by allowing empty rows ("holes") to appear in reference property lists (Mika Westerberg). - Add a new MAINTAINERS entry for ACPI on ARM64 (Lorenzo Pieralisi)" * tag 'acpi-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT ACPI / PAD: don't register acpi_pad driver if running as Xen dom0 ACPI / property: Allow holes in reference properties MAINTAINERS: Add ARM64-specific ACPI maintainers entry ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n ACPI / fan: Fix error reading cur_state
2016-10-14Merge tag 'pm-extra-4.9-rc1' of ↵Linus Torvalds6-19/+63
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "This includes a couple of fixes for cpufreq regressions introduced in 4.8, a rework of the intel_pstate algorithm used on Atom processors (that took some time to test) plus a fix and a couple of cleanups in that driver, a CPPC cpufreq driver fix, and a some devfreq fixes and cleanups (core and exynos-nocp). Specifics: - Fix two cpufreq regressions causing undesirable changes in behavior to appear (one in the core and one in the conservative governor) introduced during the 4.8 cycle (Aaro Koskinen, Rafael Wysocki). - Fix the way the intel_pstate driver accesses MSRs related to the hardware-managed P-states (HWP) feature during the initialization which currently is unsafe and may cause the processor to generate a general protection fault (Srinivas Pandruvada). - Rework the intel_pstate's P-state selection algorithm used on Atom processors to avoid known problems with the current one and to make the computation more straightforward, which also happens to improve performance in multiple benchmarks a bit (Rafael Wysocki). - Improve two comments in the intel_pstate driver (Rafael Wysocki). - Fix the desired performance computation in the CPPC cpufreq driver (Hoan Tran). - Fix the devfreq core to avoid printing misleading error messages in some cases (Tobias Jakobi). - Fix the error code path in devfreq_add_device() to use proper locking around list modifications (Axel Lin). - Fix a build failure and remove a couple of redundant updates of variables in the exynos-nocp devfreq driver (Axel Lin)" * tag 'pm-extra-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: CPPC: Correct desired_perf calculation cpufreq: conservative: Fix next frequency selection cpufreq: skip invalid entries when searching the frequency cpufreq: intel_pstate: Fix struct pstate_adjust_policy kerneldoc cpufreq: intel_pstate: Proportional algorithm for Atom PM / devfreq: Skip status update on uninitialized previous_freq PM / devfreq: Add proper locking around list_del() PM / devfreq: exynos-nocp: Remove redundant code PM / devfreq: exynos-nocp: Select REGMAP_MMIO cpufreq: intel_pstate: Clarify comment in get_target_pstate_use_performance() cpufreq: intel_pstate: Fix unsafe HWP MSR access
2016-10-14qedr: Add events support and register IB deviceRam Amrani3-2/+158
Add error handling support. Register ib device with ib stack. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add GSI supportRam Amrani7-1/+706
Add support for GSI over light L2. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add LL2 RoCE interfaceRam Amrani2-2/+34
Add light L2 interface for RoCE. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for data pathRam Amrani5-1/+1614
Implement fastpath verbs like ib_send_post, ib_post_recv and ib_poll_cq. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for memory registeration verbsRam Amrani4-1/+425
Add support for user, dma and memory regions registration. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for QP verbsRam Amrani6-1/+1286
Add support for Queue Pair verbs which adds, deletes, modifies and queries Queue Pairs. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for PD,PKEY and CQ verbsRam Amrani5-1/+758
Add support for protection domain and completion queue verbs. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for user context verbsRam Amrani5-1/+569
Add support for ucontext, query port, add and del gid verbs. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add support for RoCE HW initRam Amrani4-2/+691
Allocate and setup RoCE resources, interrupts and completion queues. Adds device attributes. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14qedr: Add RoCE driver frameworkRam Amrani7-11/+328
Adds a skeletal implementation of the qed* RoCE driver - basically the ability to communicate with the qede driver and receive notifications from it regarding various init/exit events. Signed-off-by: Rajesh Borundia <rajesh.borundia@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-14Merge branch 'for-4.9' of ↵Linus Torvalds9-195/+312
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - Write same support added - Minor ahci MSIX irq handling updates - Non-critical SCSI command translation fixes - Controller specific changes * 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: qoriq: Revert "ahci: qoriq: Disable NCQ on ls2080a SoC" libata: remove <asm-generic/libata-portmap.h> libata: remove unused definitions from <asm/libata-portmap.h> pata_at91: Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR ata: Replace BUG() with BUG_ON(). ata: sata_mv: Replacing dma_pool_alloc and memset with a single call dma_pool_zalloc. libata: Some drives failing on SCT Write Same ahci: use pci_alloc_irq_vectors libata: SCT Write Same handle ATA_DFLAG_PIO libata: SCT Write Same / DSM Trim libata: Add support for SCT Write Same libata: Safely overwrite attached page in WRITE SAME xlat ahci: also use a per-port lock for the multi-MSIX case ARM: dts: STiH407-family: Add ports-implemented property in sata nodes ahci: st: Add ports-implemented property in support ahci: qoriq: enable snoopable sata read and write ahci: qoriq: adjust sata parameter libata-scsi: fix MODE SELECT translation for Control mode page libata-scsi: use u8 array to store mode page copy
2016-10-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds7-417/+321
Pull more SCSI updates from James Bottomley: "This is just a set of minor updates and fixes which weren't quite ready in time for the first pull request. The only real thing of note is Mike Christie is stepping down as Maintainer of iscsi to be replaced by Lee Duncan and Chris Leech" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Kconfig fix scsi: g_NCR5380: Stop using scsi_module.c scsi: g_NCR5380: Reduce overrides[] from array to struct scsi: g_NCR5380: Remove deprecated __setup scsi: ufs: Fix error return code in ufshcd_init() scsi: ufs: Data Segment only needed for WRITE DESCRIPTOR scsi: cxgb4i: Set completion bit in work request MAINTAINERS: Update open-iscsi maintainers scsi: ufs: Enable no vccq quirk for skhynix device scsi: be2iscsi: mark symbols static where possible
2016-10-14Merge tag 'powerpc-4.9-2' of ↵Linus Torvalds24-8/+7181
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc updates from Michael Ellerman: "Some more powerpc updates for 4.9: Freescale updates from Scott Wood: - qbman support (a prerequisite for datapath drivers such as ethernet) - a PCI DMA fix+improvement - reset handler changes - more 8xx optimizations - some cleanups and fixes.' Fixes: - selftests/powerpc: Add missing binaries to .gitignores (Michael Ellerman) - selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes (Michael Ellerman) - powerpc/pseries: Fix stack corruption in htpe code (Laurent Dufour) - powerpc/64s: Fix power4_fixup_nap placement (Nicholas Piggin) - powerpc/64: Fix incorrect return value from __copy_tofrom_user (Paul Mackerras) - powerpc/mm/hash64: Fix might_have_hea() check (Michael Ellerman) Other: - MAINTAINERS: Remove myself from PA Semi entries (Olof Johansson) - MAINTAINERS: Drop separate pseries entry (Michael Ellerman) - MAINTAINERS: Update powerpc website & add selftests (Michael Ellerman): * tag 'powerpc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (35 commits) powerpc/mm/hash64: Fix might_have_hea() check powerpc/64: Fix incorrect return value from __copy_tofrom_user powerpc/64s: Fix power4_fixup_nap placement powerpc/pseries: Fix stack corruption in htpe code selftests/powerpc: Fix build break caused by EXPORT_SYMBOL changes MAINTAINERS: Update powerpc website & add selftests MAINTAINERS: Drop separate pseries entry MAINTAINERS: Remove myself from PA Semi entries selftests/powerpc: Add missing binaries to .gitignores arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig soc/qman: Add self-test for QMan driver soc/bman: Add self-test for BMan driver soc/fsl: Introduce DPAA 1.x QMan device driver soc/fsl: Introduce DPAA 1.x BMan device driver powerpc/8xx: make user addr DTLB miss the short path powerpc/8xx: Move additional DTLBMiss handlers out of exception area powerpc/8xx: use r3 to scratch CR in ITLBmiss soc/fsl/qe: fix gpio save_regs functions powerpc/8xx: add dedicated machine check handler powerpc/8xx: add system_reset_exception ...
2016-10-14Merge branches 'acpi-fan', 'acpi-ec', 'acpi-drivers' and 'acpi-osl'Rafael J. Wysocki4-4/+28
* acpi-fan: ACPI / fan: Fix error reading cur_state * acpi-ec: ACPI / EC: Fix unused function warning when CONFIG_PM_SLEEP=n * acpi-drivers: ACPI / PAD: don't register acpi_pad driver if running as Xen dom0 * acpi-osl: acpi_os_vprintf: Use printk_get_level() to avoid unnecessary KERN_CONT
2016-10-14Merge branches 'device-properties' and 'acpi-misc'Rafael J. Wysocki1-49/+68
* device-properties: ACPI / property: Allow holes in reference properties * acpi-misc: MAINTAINERS: Add ARM64-specific ACPI maintainers entry
2016-10-14Merge branches 'pm-cpufreq' and 'pm-devfreq'Rafael J. Wysocki6-19/+63
* pm-cpufreq: cpufreq: CPPC: Correct desired_perf calculation cpufreq: conservative: Fix next frequency selection cpufreq: skip invalid entries when searching the frequency cpufreq: intel_pstate: Fix struct pstate_adjust_policy kerneldoc cpufreq: intel_pstate: Proportional algorithm for Atom cpufreq: intel_pstate: Clarify comment in get_target_pstate_use_performance() cpufreq: intel_pstate: Fix unsafe HWP MSR access * pm-devfreq: PM / devfreq: Skip status update on uninitialized previous_freq PM / devfreq: Add proper locking around list_del() PM / devfreq: exynos-nocp: Remove redundant code PM / devfreq: exynos-nocp: Select REGMAP_MMIO
2016-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds16-83/+214
Pull networking fixes from David Miller: 1) Fix various build warnings in tlan/qed/xen-netback drivers, from Arnd Bergmann. 2) Propagate proper error code in strparser's strp_recv(), from Geert Uytterhoeven. 3) Fix accidental broadcast of RTM_GETTFILTER responses, from Eric Dumazret. 4) Need to use list_for_each_entry_safe() in qed driver, from Wei Yongjun. 5) Openvswitch 802.1AD bug fixes from Jiri Benc. 6) Cure BUILD_BUG_ON() in mlx5 driver, from Tom Herbert. 7) Fix UDP ipv6 checksumming in netvsc driver, from Stephen Hemminger. 8) stmmac driver fixes from Giuseppe CAVALLARO. 9) Fix access to mangled IP6CB in tcp, from Eric Dumazet. 10) Fix info leaks in tipc and rtnetlink, from Dan Carpenter. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) net: bridge: add the multicast_flood flag attribute to brport_attrs net: axienet: Remove unused parameter from __axienet_device_reset liquidio: CN23XX: fix a loop timeout net: rtnl: info leak in rtnl_fill_vfinfo() tipc: info leak in __tipc_nl_add_udp_addr() net: ipv4: Do not drop to make_route if oif is l3mdev net: phy: Trigger state machine on state change and not polling. ipv6: tcp: restore IP6CB for pktoptions skbs netvsc: Remove mistaken udp.h inclusion. xen-netback: fix type mismatch warning stmmac: fix error check when init ptp stmmac: fix ptp init for gmac4 qed: fix old-style function definition netvsc: fix checksum on UDP IPV6 net_sched: reorder pernet ops and act ops registrations xen-netback: fix guest Rx stall detection (after guest Rx refactor) drivers/ptp: Fix kernel memory disclosure net/mlx5: Add MLX5_ARRAY_SET64 to fix BUILD_BUG_ON qmi_wwan: add support for Quectel EC21 and EC25 openvswitch: add NETIF_F_HW_VLAN_STAG_TX to internal dev ...
2016-10-13Merge branch 'next' into for-linusDmitry Torokhov13-58/+317
Prepare second round of input updates for 4.9 merge window.
2016-10-13Merge tag 'pci-v4.9-changes-2' of ↵Linus Torvalds28-1187/+1099
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci PCI changes for the v4.9 merge window: "Here are some more changes I'd like to have in v4.9. There's one small Tegra bug fix in the PHY poweroff path, which is only used in failure paths. The rest is all strictly cleanup that should make host bridge drivers more readable, but shouldn't actually change any behavior. Summary: - use local struct device pointers in many host bridge drivers for clarity - remove unused platform data - use generic DesignWare accessors - misc cleanups: remove redundant structure entries and re-order structure members to put comon generic fields first etc" * tag 'pci-v4.9-changes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) MAINTAINERS: Add maintainer for the PCIe Marvell Armada 8K driver MAINTAINERS: Add DT binding to the Aardvark PCIe driver maintainer PCI: rockchip: Indent "if" statement body PCI: hisi: Reorder struct hisi_pcie PCI: hisi: Pass device-specific struct to internal functions PCI: hisi: Include register block base in PCIE_SYS_STATE4 address PCI: dra7xx: Reorder struct dra7xx_pcie PCI: xilinx-nwl: Remove unused platform data PCI: xilinx-nwl: Add local struct device pointers PCI: xilinx: Removed unused xilinx_pcie_assign_msi() argument PCI: xilinx: Remove unused platform data PCI: xilinx: Add local struct device pointers PCI: xgene: Add register accessors PCI: xgene: Pass struct xgene_pcie_port to setup functions PCI: xgene: Remove unused platform data PCI: tegra: Remove unused platform data PCI: tegra: Add local struct device pointers PCI: tegra: Fix argument order in tegra_pcie_phy_disable() PCI: rockchip: Remove unused platform data PCI: rcar-gen2: Add local struct device pointers ...
2016-10-13Merge tag 'platform-drivers-x86-v4.9-1' of ↵Linus Torvalds9-230/+300
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform drivers updates from Darren Hart: "Cleanups, refactoring, and a couple bug fixes. intel_pmc_core: - avoid boot time warning for !CONFIG_DEBUGFS_FS intel_pmc_ipc: - Convert to use platform_device_register_full asus-wmi: - Filter buggy scan codes on ASUS Q500A toshiba_bluetooth: - Decouple an error checking status code toshiba_haps: - Change logging level from info to debug - Split ACPI and HDD protection error handling asus-laptop: - get rid of parse_arg() asus-wmi: - fix asus ux303ub brightness issue toshiba_acpi: - Fix typo in *_cooling_method_set function - Change error checking logic from TCI functions - Clean up variable declaration" * tag 'platform-drivers-x86-v4.9-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: platform/x86: intel_pmc_core: avoid boot time warning for !CONFIG_DEBUGFS_FS platform/x86: intel_pmc_ipc: Convert to use platform_device_register_full platform/x86: asus-wmi: Filter buggy scan codes on ASUS Q500A platform/x86: toshiba_bluetooth: Decouple an error checking status code platform/x86: toshiba_haps: Change logging level from info to debug platform/x86: toshiba_haps: Split ACPI and HDD protection error handling platform/x86: asus-laptop: get rid of parse_arg() platform/x86: asus-wmi: fix asus ux303ub brightness issue platform/x86: toshiba_acpi: Fix typo in *_cooling_method_set function platform/x86: toshiba_acpi: Change error checking logic from TCI functions platform/x86: toshiba_acpi: Clean up variable declaration
2016-10-13Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds26-77/+1068
Pull watchdog updates from Wim Van Sebroeck: - a new watchdog pretimeout governor framework - support to upload the firmware on the ziirave_wdt - several fixes and cleanups * git://www.linux-watchdog.org/linux-watchdog: (26 commits) watchdog: imx2_wdt: add pretimeout function support watchdog: softdog: implement pretimeout support watchdog: pretimeout: add pretimeout_available_governors attribute watchdog: pretimeout: add option to select a pretimeout governor in runtime watchdog: pretimeout: add panic pretimeout governor watchdog: pretimeout: add noop pretimeout governor watchdog: add watchdog pretimeout governor framework watchdog: hpwdt: add support for iLO5 fs: compat_ioctl: add pretimeout functions for watchdogs watchdog: add pretimeout support to the core watchdog: imx2_wdt: use preferred BIT macro instead of open coded values watchdog: st_wdt: Remove support for obsolete platforms watchdog: bindings: Remove obsolete platforms from dt doc. watchdog: mt7621_wdt: Remove assignment of dev pointer watchdog: rt2880_wdt: Remove assignment of dev pointer watchdog: constify watchdog_ops structures watchdog: tegra: constify watchdog_ops structures watchdog: iTCO_wdt: constify iTCO_wdt_pm structure watchdog: cadence_wdt: Fix the suspend resume watchdog: txx9wdt: Add missing clock (un)prepare calls for CCF ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 05:09:29 +0000