summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/intel
AgeCommit message (Collapse)AuthorFilesLines
2019-11-07pinctrl: cherryview: Missed type change to unsigned intAndy Shevchenko1-2/+2
We converted 'unsigned' type to be 'unsigned int' in the driver, but there are couple of leftovers. So, finish the task now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-11-07pinctrl: intel: Missed type change to unsigned intAndy Shevchenko1-2/+2
We converted 'unsigned' type to be 'unsigned int' in the driver, but there are couple of leftovers. So, finish the task now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-30pinctrl: intel: Add Intel Tiger Lake pin controller supportAndy Shevchenko3-0/+462
This driver adds pinctrl/GPIO support for Intel Tiger Lake SoC. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-30pinctrl: intel: Use helper to restore register values on ->resume()Andy Shevchenko1-13/+13
We can restore only values that had been changed and do not spam kernel log with unnecessary messages. Convert intel_gpio_update_pad_mode() to a helper function that will be used across few callers. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: intel: Drop level from warning to debug in intel_restore_hostown()Andy Shevchenko1-1/+1
Since we didn't get any new reports from users about wrong settings of pad ownership, there is no point to spam kernel log with it. Thus, drop level from warning to debug. Also, modify format to be in align with the rest restore helpers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: intel: Introduce intel_restore_intmask() helperAndy Shevchenko1-5/+11
Refactor restoring GPI_IE registers by using an introduced helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: intel: Introduce intel_restore_hostown() helperAndy Shevchenko1-17/+21
Refactor restoring HOSTSW_OWN registers by using an introduced helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: intel: Introduce intel_restore_padcfg() helperAndy Shevchenko1-27/+24
Deduplicate restoring PADCFGx registers by using a common helper. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: cherryview: Allocate IRQ chip dynamicAndy Shevchenko1-12/+12
Keeping the IRQ chip definition static shares it with multiple instances of the GPIO chip in the system. This is bad and now we get this warning from GPIO library: "detected irqchip that is shared with multiple gpiochips: please fix the driver." Hence, move the IRQ chip definition from being driver static into the struct intel_pinctrl. So a unique IRQ chip is used for each GPIO chip instance. This patch is heavily based on the attachment to the bug by Christoph Marz. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=202543 Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support") Depends-on: 83b9dc11312f ("pinctrl: cherryview: Associate IRQ descriptors to irqdomain") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: cherryview: Fix spelling mistake in the commentAndy Shevchenko1-1/+1
One spelling mistake is being fixed: benerate -> generate. It is a complimentary fix to the commit 505485a83c55 ("pinctrl: cherryview fixed typo in comment"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-30pinctrl: cherryview: Fix irq_valid_mask calculationHans de Goede1-1/+1
Commit 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation") has made the cherryview gpio numbers sparse, to get a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux. This has greatly simplified things, but the code setting the irq_valid_mask was not updated for this, so the valid mask is still in the old "compressed" numbering with the gaps in the pin numbers skipped, which is wrong as irq_valid_mask needs to be expressed in gpio numbers. This results in the following error on devices using pin 24 (0x0018) on the north GPIO controller as an ACPI event source: [ 0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ This has been reported (by email) to be happening on a Caterpillar CAT T20 tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1. This commit uses the pin number instead of the compressed index into community->pins to clear the correct bits in irq_valid_mask for GPIOs using GPEs for interrupts, fixing these errors and in case of the Medion Akoya e2215t also fixing the LID switch not working. Cc: stable@vger.kernel.org Fixes: 03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-30pinctrl: intel: Avoid potential glitches if pin is in GPIO modeAndy Shevchenko1-1/+20
When consumer requests a pin, in order to be on the safest side, we switch it first to GPIO mode followed by immediate transition to the input state. Due to posted writes it's luckily to be a single I/O transaction. However, if firmware or boot loader already configures the pin to the GPIO mode, user expects no glitches for the requested pin. We may check if the pin is pre-configured and leave it as is till the actual consumer toggles its state to avoid glitches. Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support") Depends-on: f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip") Cc: stable@vger.kernel.org Cc: fei.yang@intel.com Reported-by: Oliver Barta <oliver.barta@aptiv.com> Reported-by: Malin Jonsson <malin.jonsson@ericsson.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-01pinctrl: cherryview: restore Strago DMI workaround for all versionsDmitry Torokhov1-4/+0
This is essentially a revert of: e3f72b749da2 pinctrl: cherryview: fix Strago DMI workaround 86c5dd6860a6 pinctrl: cherryview: limit Strago DMI workarounds to version 1.0 because even with 1.1 versions of BIOS there are some pins that are configured as interrupts but not claimed by any driver, and they sometimes fire up and result in interrupt storms that cause touchpad stop functioning and other issues. Given that we are unlikely to qualify another firmware version for a while it is better to keep the workaround active on all Strago boards. Reported-by: Alex Levin <levinale@chromium.org> Fixes: 86c5dd6860a6 ("pinctrl: cherryview: limit Strago DMI workarounds to version 1.0") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Alex Levin <levinale@chromium.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-10-01pinctrl: intel: Allocate IRQ chip dynamicAndy Shevchenko1-13/+14
Keeping the IRQ chip definition static shares it with multiple instances of the GPIO chip in the system. This is bad and now we get this warning from GPIO library: "detected irqchip that is shared with multiple gpiochips: please fix the driver." Hence, move the IRQ chip definition from being driver static into the struct intel_pinctrl. So a unique IRQ chip is used for each GPIO chip instance. Fixes: ee1a6ca43dba ("pinctrl: intel: Add Intel Broxton pin controller support") Depends-on: 5ff56b015e85 ("pinctrl: intel: Disable GPIO pin interrupts in suspend") Reported-by: Federico Ricchiuto <fed.ricchiuto@gmail.com> Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-09-19Merge tag 'pinctrl-v5.4-1' of ↵Linus Torvalds12-119/+156
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.4 kernel cycle: Core changes: - Fix errors in example code in the documentation. New drivers: - Add support for JZ4760, JZ4760B, X1000, X1000E and X1500 to the Ingenic driver. - Support Cirrus Logic Madera CS47L92 and CS47L15. - Support Allwinner Sunxi V3S. - Support Aspeed 2600 BMC. - Support Qualcomm SC7180. - Support Marvell MVEBU CS115. Driver improvements: - Clean up a few drivers to use the devm_platform_ioremap_resource() helper. - Pass the irqchip when registering the gpio_chip in some pin controllers that are also GPIO controllers. - Support suspend/resume in the Tegra driver. - Support pull-up on the Broadcom BCM2711. - The Intel driver can now request locked pads. - Fix the UFS reset pin in the Qualcomm SDM845 driver" * tag 'pinctrl-v5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (112 commits) pinctrl: meson-gxbb: Fix wrong pinning definition for uart_c pinctrl: sh-pfc: Unlock on error in sh_pfc_func_set_mux() pinctrl: bcm: remove redundant assignment to pointer log pinctrl: iproc: Add 'get_direction' support pinctrl: iproc-gpio: Handle interrupts for multiple instances pinctrl: iproc-gpio: Fix incorrect pinconf configurations pinctrl: intel: mark intel_pin_to_gpio __maybe_unused pinctrl: qcom: sdm845: Fix UFS_RESET pin pinctrl: mvebu: add additional variant for standalone CP115 pinctrl: mvebu: Add CP110 missing pin functionality dt-bindings: cp110: document the new CP115 pinctrl compatible pinctrl: bcm2835: Pass irqchip when adding gpiochip pinctrl: meson: meson: Add of_node_put() before return pinctrl/gpio: Take MUX usage into account dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150l support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150b support dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8150 support pinctrl: amd: disable spurious-firing GPIO IRQs pinctrl: rza2: Include the appropriate headers pinctrl: rza2: Drop driver use of consumer flags ...
2019-09-11gpio: Initialize the irqchip valid_mask with a callbackLinus Walleij2-17/+41
After changing the valid_mask for the struct gpio_chip to detect the need and presence of a valid mask with the presence of a .init_valid_mask() callback to fill it in, we augment the gpio_irq_chip to use the same logic. Switch all driver using the gpio_irq_chio valid_mask over to this new method. This makes sure the valid_mask for the gpio_irq_chip gets filled in when we add the gpio_chip, which makes it a little easier to switch over drivers using the old way of setting up gpio_irq_chip over to the new method of passing the gpio_irq_chip along with the gpio_chip. (See drivers/gpio/TODO for details.) Cc: Joel Stanley <joel@jms.id.au> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Link: https://lore.kernel.org/r/20190904140104.32426-1-linus.walleij@linaro.org
2019-09-09pinctrl: intel: mark intel_pin_to_gpio __maybe_unusedArnd Bergmann1-1/+1
The intel_pin_to_gpio() function is only called by the PM support functions and causes a warning when those are disabled: drivers/pinctrl/intel/pinctrl-intel.c:841:12: error: unused function 'intel_pin_to_gpio' [-Werror,-Wunused-function] Mark it __maybe_unused to suppress the warning. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Chris Chiu <chiu@endlessm.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-19pinctrl: intel: remap the pin number to gpio offset for irq enabled pinChris Chiu1-1/+24
On Asus X571GT, GPIO 297 is configured as an interrupt and serves for the touchpad. The touchpad will report input events much less than expected after S3 suspend/resume, which results in extremely slow cursor movement. However, the number of interrupts observed from /proc/interrupts increases much more than expected even no touching touchpad. This is due to the value of PADCFG0 of PIN 225 for the interrupt has been changed from 0x80800102 to 0x80100102. The GPIROUTIOXAPIC is toggled on which results in the spurious interrupts. The PADCFG0 of PIN 225 is expected to be saved during suspend, but the 297 is saved instead because the gpiochip_line_is_irq() expect the GPIO offset but what's really passed to it is PIN number. In this case, the /sys/kernel/debug/pinctrl/INT3450:00/gpio-ranges shows 288: INT3450:00 GPIOS [436 - 459] PINS [216 - 239] So gpiochip_line_is_irq() returns true for GPIO offset 297, the suspend routine spuriously saves the content for PIN 297 which we expect to save for PIN 225. This commit maps the PIN number to GPIO offset first in the intel_pinctrl_should_save() to make sure the values for the specific PINs can be correctly saved and then restored. Fixes: c538b9436751 ("pinctrl: intel: Only restore pins that are used by the driver") Signed-off-by: Chris Chiu <chiu@endlessm.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-18pinctrl: intel: Allow to request locked padsAndy Shevchenko1-17/+52
Some firmwares would like to protect pads from being modified by OS and at the same time provide them to OS as a resource. So, the driver in such circumstances may request pad and may not change its state. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-08pinctrl: denverton: Update pin names according to v1.08Andy Shevchenko1-24/+25
Version 1.08 of pin list has some changes in pin names for Intel Denverton. Update the driver accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: cherryview: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-07pinctrl: intel: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-07pinctrl: intel: Use NSEC_PER_USEC for debounce calculusAndy Shevchenko1-4/+5
Replace hard coded constants with self-explanatory names, i.e. use NSEC_PER_USEC for debounce calculus. While here, add a unit suffix to debounce period constant. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: baytrail: Re-use data structures from pinctrl-intel.h (part 2)Andy Shevchenko2-44/+27
We have some data structures duplicated across the drivers. Let's deduplicate them by using ones that being provided by pinctrl-intel.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: intel: Remove default Interrupt Status offsetAndy Shevchenko2-6/+1
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the drivers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: lewisburg: Provide Interrupt Status register offsetAndy Shevchenko1-0/+2
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: denverton: Provide Interrupt Status register offsetAndy Shevchenko1-1/+3
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: sunrisepoint: Provide Interrupt Status register offsetAndy Shevchenko1-0/+2
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: icelake: Provide Interrupt Status register offsetAndy Shevchenko1-0/+2
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: geminilake: Provide Interrupt Status register offsetAndy Shevchenko1-0/+2
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: cannonlake: Provide Interrupt Status register offsetAndy Shevchenko1-0/+2
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: broxton: Provide Interrupt Status register offsetAndy Shevchenko1-1/+3
Since some of the GPIO controllers use different Interrupt Status offset, it make sense to provide it explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-08-07pinctrl: intel: Simplify offset validation in intel_get_padcfg()Andy Shevchenko1-1/+1
There is more generic and simpler validation just against the nregs. Using it allows to drop customization from the intel_get_padcfg(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: intel: Drop double check for data in intel_pinctrl_probe_by_uid()Andy Shevchenko1-2/+0
There is no need to duplicate the check which is done in the common intel_pinctrl_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: merrifield: Use devm_platform_ioremap_resource()Andy Shevchenko1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: intel: Use devm_platform_ioremap_resource()Andy Shevchenko1-4/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: cherryview: Use devm_platform_ioremap_resource()Andy Shevchenko1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-23pinctrl: baytrail: Use devm_platform_ioremap_resource()Andy Shevchenko1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-07-13Merge tag 'pinctrl-v5.3-1' of ↵Linus Torvalds1-251/+71
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.3 kernel cycle: Core changes: - Device links can optionally be added between a pin control producer and its consumers. This will affect how the system power management is handled: a pin controller will not suspend before all of its consumers have been suspended. This was necessary for the ST Microelectronics STMFX expander and need to be tested on other systems as well: it makes sense to make this default in the long run. Right now it is opt-in per driver. - Drive strength can be specified in microamps. With decreases in silicon technology, milliamps isn't granular enough, let's make it possible to select drive strengths in microamps. Right now the Meson (AMlogic) driver needs this. New drivers: - New subdriver for the Tegra 194 SoC. - New subdriver for the Qualcomm SDM845. - New subdriver for the Qualcomm SM8150. - New subdriver for the Freescale i.MX8MN (Freescale is now a product line of NXP). - New subdriver for Marvell MV98DX1135. Driver improvements: - The Bitmain BM1880 driver now supports pin config in addition to muxing. - The Qualcomm drivers can now reserve some GPIOs as taken aside and not usable for users. This is used in ACPI systems to take out some GPIO lines used by the BIOS so that noone else (neither kernel nor userspace) will play with them by mistake and crash the machine. - A slew of refurbishing around the Aspeed drivers (board management controllers for servers) in preparation for the new Aspeed AST2600 SoC. - A slew of improvements over the SH PFC drivers as usual. - Misc cleanups and fixes" * tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits) pinctrl: aspeed: Strip moved macros and structs from private header pinctrl: aspeed: Fix missed include pinctrl: baytrail: Use GENMASK() consistently pinctrl: baytrail: Re-use data structures from pinctrl-intel.h pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux() pinctrl: qcom: Add SM8150 pinctrl driver dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding dt-bindings: pinctrl: qcom: Document missing gpio nodes pinctrl: aspeed: Add implementation-related documentation pinctrl: aspeed: Split out pinmux from general pinctrl pinctrl: aspeed: Clarify comment about strapping W1C pinctrl: aspeed: Correct comment that is no longer true MAINTAINERS: Add entry for ASPEED pinctrl drivers dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema dt-bindings: pinctrl: aspeed: Split bindings document in two pinctrl: qcom: Add irq_enable callback for msm gpio pinctrl: madera: Fixup SPDX headers pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard pinctrl: tegra: Add bitmask support for parked bits ...
2019-07-04pinctrl: baytrail: Use GENMASK() consistentlyAndy Shevchenko1-9/+7
Use GENMASK() macro for all definitions where it's appropriate. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190703151554.30454-1-andriy.shevchenko@linux.intel.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04pinctrl: baytrail: Re-use data structures from pinctrl-intel.hAndy Shevchenko1-239/+60
We have some data structures duplicated across the drivers. Let's deduplicate them by using ones that being provided by pinctrl-intel.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190703003018.75186-2-andriy.shevchenko@linux.intel.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-04pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()Andy Shevchenko1-3/+4
By the fact byt_get_gpio_mux() returns a value of mux settings as it is represented in hardware. Use defined macro instead of magic numbers to clarify this. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20190703003018.75186-1-andriy.shevchenko@linux.intel.com Reviewed-By: Enrico Weigelt <info@metux.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-20pinctrl: intel: Clear interrupt status in mask/unmask callbackKai-Heng Feng1-31/+6
Commit a939bb57cd47 ("pinctrl: intel: implement gpio_irq_enable") was added because clearing interrupt status bit is required to avoid unexpected behavior. Turns out the unmask callback also needs the fix, which can solve weird IRQ triggering issues on I2C touchpad ELAN1200. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-05-20pinctrl: intel: Use GENMASK() consistentlyAndy Shevchenko1-4/+4
Use GENMASK() macro for all definitions. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-04-28pinctrl: intel: Increase readability of intel_gpio_update_pad_mode()Andy Shevchenko1-2/+4
We better to use usual pattern for read-modify-update, than doing some operations in definition block. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-04-28pinctrl: intel: Retain HOSTSW_OWN for requested gpio pinChris Chiu1-1/+55
The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not responsive after suspend/resume. The following error message shows after resume. i2c_hid i2c-ELAN1200:00: failed to reset device. On these laptops, the touchpad interrupt is connected via a GPIO pin which is controlled by Intel pinctrl. After system resumes, the GPIO is in ACPI mode and no longer works as an IRQ. This commit saves the HOSTSW_OWN value during suspend, make sure the HOSTSW_OWN mode remains the same after resume. Signed-off-by: Chris Chiu <chiu@endlessm.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-04-09pinctrl: pinctrl-intel: move gpio suspend/resume to noirq phaseBinbin Wu2-9/+10
In current driver, SET_LATE_SYSTEM_SLEEP_PM_OPS is used to install the callbacks for suspend/resume. GPIO pin may be used as the interrupt pin by some device. However, using SET_LATE_SYSTEM_SLEEP_PM_OPS() to install the callbacks, the resume callback is called after resume_device_irqs(). Unintended interrupts may arrive due to resuming device irqs first, but the GPIO controller is not properly restored. Normally, for a SMP system, there are multiple cores, so even when there are unintended interrupts, BSP gets the chance to initialize the GPIO chip soon. But when there is only 1 core is active (other cores are offlined or single core) during resume, it is more easily to observe the unintended interrupts. This patch renames the suspend/resume function by adding suffix "_noirq", and installs the callbacks using SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(). Signed-off-by: Binbin Wu <binbin.wu@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-04-03pinctrl: cedarfork: Update pin names according to v1.13cAndy Shevchenko1-9/+9
Version 1.13c of pin list has some changes in pin names for Intel Cedarfork. Update the driver accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linar.org>
2019-03-18pinctrl: baytrail: Fix potential NULL pointer dereferenceAditya Pakki1-0/+2
saved-context in byt_gpio_probe is allocated via devm_kcalloc and is used without checking for NULL in later functions. This patch avoids such a scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-01-21pinctrl: cherryview: fix Strago DMI workaroundDmitry Torokhov1-4/+4
Well, hopefully 3rd time is a charm. We tried making that check DMI_BIOS_VERSION and DMI_BOARD_VERSION, but the real one is DMI_PRODUCT_VERSION. Fixes: 86c5dd6860a6 ("pinctrl: cherryview: limit Strago DMI workarounds to version 1.0") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1631930 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 13:36:15 +0000