summaryrefslogtreecommitdiff
path: root/drivers/net/macvlan.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-10macvlan: optimize the receive pathjbaron@akamai.com1-5/+10
The netif_rx() call on the fast path of macvlan_handle_frame() appears to be there to ensure that we properly throttle incoming packets. However, it would appear as though the proper throttling is already in place for all possible ingress paths, and that the call is redundant. If packets are arriving from the physical NIC, we've already throttled them by this point. Otherwise, if they are coming via macvlan_queue_xmit(), it calls either 'dev_forward_skb()', which ends up calling netif_rx_internal(), or else in the broadcast case, we are throttling via macvlan_broadcast_enqueue(). The test results below are from off the box to an lxc instance running macvlan. Once the tranactions/sec stop increasing, the cpu idle time has gone to 0. Results are from a quad core Intel E3-1270 V2@3.50GHz box with bnx2x 10G card. for i in {10,100,200,300,400,500}; do super_netperf $i -H $ip -t TCP_RR; done Average of 5 runs. trans/sec trans/sec (3.17-rc7-net-next) (3.17-rc7-net-next + this patch) ---------- ---------- 208101 211534 (+1.6%) 839493 850162 (+1.3%) 845071 844053 (-.12%) 816330 819623 (+.4%) 778700 789938 (+1.4%) 735984 754408 (+2.5%) Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10macvlan: pass 'bool' type to macvlan_count_rx()jbaron@akamai.com1-3/+3
Pass last argument to macvlan_count_rx() as the correct bool type. Signed-off-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-07net: better IFF_XMIT_DST_RELEASE supportEric Dumazet1-1/+2
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29macvlan: add source modeMichael Braun1-3/+301
This patch adds a new mode of operation to macvlan, called "source". It allows one to set a list of allowed mac address, which is used to match against source mac address from received frames on underlying interface. This enables creating mac based VLAN associations, instead of standard port or tag based. The feature is useful to deploy 802.1x mac based behavior, where drivers of underlying interfaces doesn't allows that. Configuration is done through the netlink interface using e.g.: ip link add link eth0 name macvlan0 type macvlan mode source ip link add link eth0 name macvlan1 type macvlan mode source ip link set link dev macvlan0 type macvlan macaddr add 00:11:11:11:11:11 ip link set link dev macvlan0 type macvlan macaddr add 00:22:22:22:22:22 ip link set link dev macvlan0 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:33:33:33:33:33 ip link set link dev macvlan1 type macvlan macaddr add 00:44:44:44:44:44 This allows clients with MAC addresses 00:11:11:11:11:11, 00:22:22:22:22:22 to be part of only VLAN associated with macvlan0 interface. Clients with MAC addresses 00:44:44:44:44:44 with only VLAN associated with macvlan1 interface. And client with MAC address 00:33:33:33:33:33 to be associated with both VLANs. Based on work of Stefan Gula <steweg@gmail.com> v8: last version of Stefan Gula for Kernel 3.2.1 v9: rework onto linux-next 2014-03-12 by Michael Braun add MACADDR_SET command, enable to configure mac for source mode while creating interface v10: - reduce indention level - rename source_list to source_entry - use aligned 64bit ether address - use hash_64 instead of addr[5] v11: - rebase for 3.14 / linux-next 20.04.2014 v12 - rebase for linux-next 2014-09-25 Signed-off-by: Michael Braun <michael-dev@fami-braun.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-22macvlan: allow to enqueue broadcast pkt on virtual deviceNicolas Dichtel1-1/+2
Since commit 412ca1550cbe ("macvlan: Move broadcasts into a work queue"), the driver uses tx_queue_len of the master device as the limit of packets enqueuing. Problem is that virtual drivers have this value set to 0, thus all broadcast packets were rejected. Because tx_queue_len was arbitrarily chosen, I replace it with a static limit of 1000 (also arbitrarily chosen). CC: Herbert Xu <herbert@gondor.apana.org.au> Reported-by: Thibaut Collet <thibaut.collet@6wind.com> Suggested-by: Thibaut Collet <thibaut.collet@6wind.com> Tested-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: allow macvlans to move to net namespaceFrancesco Ruggeri1-0/+1
I cannot move a macvlan interface created on top of a bonding interface to a different namespace: % ip netns add dummy0 % ip link add link bond0 mac0 type macvlan % ip link set mac0 netns dummy0 RTNETLINK answers: Invalid argument % The problem seems to be that commit f9399814927a ("bonding: Don't allow bond devices to change network namespaces.") sets NETIF_F_NETNS_LOCAL on bonding interfaces, and commit 797f87f83b60 ("macvlan: fix netdev feature propagation from lower device") causes macvlan interfaces to inherit its features from the lower device. NETIF_F_NETNS_LOCAL should not be inherited from the lower device by a macvlan. Patch tested on 3.16. Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-21macvlan: Allow setting multicast filter on all macvlan typesVlad Yasevich1-2/+8
Currently, macvlan code restricts multicast and unicast filter setting only to passthru devices. As a result, if a guest using macvtap wants to receive multicast traffic, it has to set IFF_ALLMULTI or IFF_PROMISC. This patch makes it possible to use the fdb interface to add multicast addresses to the filter thus allowing a guest to receive only targeted multicast traffic. CC: John Fastabend <john.r.fastabend@intel.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14Revert "macvlan: simplify the structure port"David S. Miller1-5/+7
This reverts commit a188a54d11629bef2169052297e61f3767ca8ce5. It causes crashes ==================== [ 80.643286] BUG: unable to handle kernel NULL pointer dereference at 0000000000000878 [ 80.670103] IP: [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.691289] PGD 22c102067 PUD 235bf0067 PMD 0 [ 80.706611] Oops: 0002 [#1] SMP [ 80.717836] Modules linked in: macvlan nfsd lockd nfs_acl exportfs auth_rpcgss sunrpc oid_registry ioatdma ixgbe(-) mdio igb dca [ 80.757935] CPU: 37 PID: 6724 Comm: rmmod Not tainted 3.16.0-net-next-08-12-2014-FCoE+ #1 [ 80.785688] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 80.820310] task: ffff880235a9eae0 ti: ffff88022e844000 task.ti: ffff88022e844000 [ 80.845770] RIP: 0010:[<ffffffff810832e4>] [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.875326] RSP: 0018:ffff88022e847b28 EFLAGS: 00010046 [ 80.893251] RAX: 0000000000037a6a RBX: 0000000000000878 RCX: 0000000000000000 [ 80.917187] RDX: ffff880235a9eae0 RSI: 0000000000000001 RDI: ffffffff810832db [ 80.941125] RBP: ffff88022e847b58 R08: 0000000000000000 R09: 0000000000000000 [ 80.965056] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022e847b70 [ 80.988994] R13: 0000000000000000 R14: ffff88022e847be8 R15: ffffffff81ebe440 [ 81.012929] FS: 00007fab90b07700(0000) GS:ffff88043f7a0000(0000) knlGS:0000000000000000 [ 81.040400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.059757] CR2: 0000000000000878 CR3: 0000000235a42000 CR4: 00000000001407e0 [ 81.083689] Stack: [ 81.090739] ffff880235a9eae0 0000000000000878 ffff88022e847b70 0000000000000000 [ 81.116253] ffff88022e847be8 ffffffff81ebe440 ffff88022e847b98 ffffffff810847f1 [ 81.141766] ffff88022e847b78 0000000000000286 ffff880234200000 0000000000000000 [ 81.167282] Call Trace: [ 81.175768] [<ffffffff810847f1>] __cancel_work_timer+0x31/0x170 [ 81.195985] [<ffffffff8108494b>] cancel_work_sync+0xb/0x10 [ 81.214769] [<ffffffffa015ae68>] macvlan_port_destroy+0x28/0x60 [macvlan] [ 81.237844] [<ffffffffa015b930>] macvlan_uninit+0x40/0x50 [macvlan] [ 81.259209] [<ffffffff816bf6e2>] rollback_registered_many+0x1a2/0x2c0 [ 81.281140] [<ffffffff816bf81a>] unregister_netdevice_many+0x1a/0xb0 [ 81.302786] [<ffffffffa015a4ff>] macvlan_device_event+0x1ef/0x240 [macvlan] [ 81.326439] [<ffffffff8108a13d>] notifier_call_chain+0x4d/0x70 [ 81.346366] [<ffffffff8108a201>] raw_notifier_call_chain+0x11/0x20 [ 81.367439] [<ffffffff816bf25b>] call_netdevice_notifiers_info+0x3b/0x70 [ 81.390228] [<ffffffff816bf2a1>] call_netdevice_notifiers+0x11/0x20 [ 81.411587] [<ffffffff816bf6bd>] rollback_registered_many+0x17d/0x2c0 [ 81.433518] [<ffffffff816bf925>] unregister_netdevice_queue+0x75/0x110 [ 81.455735] [<ffffffff816bfb2b>] unregister_netdev+0x1b/0x30 [ 81.475094] [<ffffffffa0039b50>] ixgbe_remove+0x170/0x1d0 [ixgbe] [ 81.495886] [<ffffffff813512a2>] pci_device_remove+0x32/0x60 [ 81.515246] [<ffffffff814c75c4>] __device_release_driver+0x64/0xd0 [ 81.536321] [<ffffffff814c76f8>] driver_detach+0xc8/0xd0 [ 81.554530] [<ffffffff814c656e>] bus_remove_driver+0x4e/0xa0 [ 81.573888] [<ffffffff814c828b>] driver_unregister+0x2b/0x60 [ 81.593246] [<ffffffff8135143e>] pci_unregister_driver+0x1e/0xa0 [ 81.613749] [<ffffffffa005db18>] ixgbe_exit_module+0x1c/0x2e [ixgbe] [ 81.635401] [<ffffffff810e738b>] SyS_delete_module+0x15b/0x1e0 [ 81.655334] [<ffffffff8187a395>] ? sysret_check+0x22/0x5d [ 81.673833] [<ffffffff810abd2d>] ? trace_hardirqs_on_caller+0x11d/0x1e0 [ 81.696339] [<ffffffff8132bfde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 81.717985] [<ffffffff8187a369>] system_call_fastpath+0x16/0x1b [ 81.738199] Code: 00 48 83 3d 6e bb da 00 00 48 89 c2 0f 84 67 01 00 00 fa 66 0f 1f 44 00 00 49 89 14 24 e8 b5 4b 02 00 45 84 ed 0f 85 ac 00 00 00 <f0> 0f ba 2b 00 72 1d 31 c0 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8 [ 81.807026] RIP [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 81.828468] RSP <ffff88022e847b28> [ 81.840384] CR2: 0000000000000878 [ 81.851731] ---[ end trace 9f6c7232e3464e11 ]--- ==================== This bug could be triggered by these steps: modprobe ixgbe ; modprobe macvlan ip link add link p96p1 address 00:1B:21:6E:06:00 macvlan0 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:01 macvlan1 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:02 macvlan2 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:03 macvlan3 type macvlan rmmod ixgbe Reported-by: "Keller, Jacob E" <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-31macvlan: Initialize vlan_features to turn on offload support.Vlad Yasevich1-0/+1
Macvlan devices do not initialize vlan_features. As a result, any vlan devices configured on top of macvlans perform very poorly. Initialize vlan_features based on the vlan features of the lower-level device. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+0
Conflicts: net/core/rtnetlink.c net/core/skbuff.c Both conflicts were very simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-08net: force a list_del() in unregister_netdevice_many()Eric Dumazet1-1/+0
unregister_netdevice_many() API is error prone and we had too many bugs because of dangling LIST_HEAD on stacks. See commit f87e6f47933e3e ("net: dont leave active on stack LIST_HEAD") In fact, instead of making sure no caller leaves an active list_head, just force a list_del() in the callee. No one seems to need to access the list after unregister_netdevice_many() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-04macvlan: Support bonding eventsVlad Yasevich1-0/+7
Bonding and team drivers generate specific events during failover that trigger switch updates. When a macvlan device is configured on top of bonding, we want switches to learn about the macvlan devices as well. This patch adds a handler to macvlan driver to propagate these events to all macvlan devices. We let the generic inetdev event handler do the work. This allows macvlan to operated correctly over active-backup mode bond. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02macvlan: add netpoll supportdingtianhong1-1/+65
Add netpoll support to macvlan devices. Based on the netpoll support in the 802.1q vlan code. Tested and macvlan could work well with netconsole. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02macvlan: fix the problem when mac address changes for passthru modedingtianhong1-12/+38
The macvlan dev should always have the same mac address like lowerdev when in the passthru mode, change the mac address alone will break the work mechanism, so when the lowerdev or macvlan mac address changes, we should propagate the changes to another dev. v1->v2: Allow macvlan dev to change mac address for passthru mode and propagate to lowerdev. v2->v3: Don't set the mac address to the lower dev's unicast address for passthru mode when mac address changes. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+14
Conflicts: drivers/net/bonding/bond_alb.c drivers/net/ethernet/altera/altera_msgdma.c drivers/net/ethernet/altera/altera_sgdma.c net/ipv6/xfrm6_output.c Several cases of overlapping changes. The xfrm6_output.c has a bug fix which overlaps the renaming of skb->local_df to skb->ignore_df. In the Altera TSE driver cases, the register access cleanups in net-next overlapped with bug fixes done in net. Similarly a bug fix to send ALB packets in the bonding driver using the right source address overlaps with cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16macvlan: Fix lockdep warnings with stacked macvlan devicesVlad Yasevich1-2/+10
Macvlan devices try to avoid stacking, but that's not always successfull or even desired. As an example, the following configuration is perefectly legal and valid: eth0 <--- macvlan0 <---- vlan0.10 <--- macvlan1 However, this configuration produces the following lockdep trace: [ 115.620418] ====================================================== [ 115.620477] [ INFO: possible circular locking dependency detected ] [ 115.620516] 3.15.0-rc1+ #24 Not tainted [ 115.620540] ------------------------------------------------------- [ 115.620577] ip/1704 is trying to acquire lock: [ 115.620604] (&vlan_netdev_addr_lock_key/1){+.....}, at: [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.620686] but task is already holding lock: [ 115.620723] (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.620795] which lock already depends on the new lock. [ 115.620853] the existing dependency chain (in reverse order) is: [ 115.620894] -> #1 (&macvlan_netdev_addr_lock_key){+.....}: [ 115.620935] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.620974] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621019] [<ffffffffa07296c3>] vlan_dev_set_rx_mode+0x53/0x110 [8021q] [ 115.621066] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621105] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621143] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] -> #0 (&vlan_netdev_addr_lock_key/1){+.....}: [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b [ 115.621174] other info that might help us debug this: [ 115.621174] Possible unsafe locking scenario: [ 115.621174] CPU0 CPU1 [ 115.621174] ---- ---- [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] lock(&macvlan_netdev_addr_lock_key); [ 115.621174] lock(&vlan_netdev_addr_lock_key/1); [ 115.621174] *** DEADLOCK *** [ 115.621174] 2 locks held by ip/1704: [ 115.621174] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff815e6dbb>] rtnetlink_rcv+0x1b/0x40 [ 115.621174] #1: (&macvlan_netdev_addr_lock_key){+.....}, at: [<ffffffff815da5be>] dev_set_rx_mode+0x1e/0x40 [ 115.621174] stack backtrace: [ 115.621174] CPU: 3 PID: 1704 Comm: ip Not tainted 3.15.0-rc1+ #24 [ 115.621174] Hardware name: Hewlett-Packard HP xw8400 Workstation/0A08h, BIOS 786D5 v02.38 10/25/2010 [ 115.621174] ffffffff82339ae0 ffff880465f79568 ffffffff816ee20c ffffffff82339ae0 [ 115.621174] ffff880465f795a8 ffffffff816e9e1b ffff880465f79600 ffff880465b019c8 [ 115.621174] 0000000000000001 0000000000000002 ffff880465b019c8 ffff880465b01230 [ 115.621174] Call Trace: [ 115.621174] [<ffffffff816ee20c>] dump_stack+0x4d/0x66 [ 115.621174] [<ffffffff816e9e1b>] print_circular_bug+0x200/0x20e [ 115.621174] [<ffffffff810d4d43>] __lock_acquire+0x1773/0x1a60 [ 115.621174] [<ffffffff810d3172>] ? trace_hardirqs_on_caller+0xb2/0x1d0 [ 115.621174] [<ffffffff810d57f2>] lock_acquire+0xa2/0x130 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff816f62e7>] _raw_spin_lock_nested+0x37/0x50 [ 115.621174] [<ffffffff815df49c>] ? dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffff815df49c>] dev_uc_sync+0x3c/0x80 [ 115.621174] [<ffffffffa0696d2a>] macvlan_set_mac_lists+0xca/0x110 [macvlan] [ 115.621174] [<ffffffff815da557>] __dev_set_rx_mode+0x57/0xa0 [ 115.621174] [<ffffffff815da5c6>] dev_set_rx_mode+0x26/0x40 [ 115.621174] [<ffffffff815da6be>] __dev_open+0xde/0x140 [ 115.621174] [<ffffffff815da9ad>] __dev_change_flags+0x9d/0x170 [ 115.621174] [<ffffffff815daaa9>] dev_change_flags+0x29/0x60 [ 115.621174] [<ffffffff811e1db1>] ? mem_cgroup_bad_page_check+0x21/0x30 [ 115.621174] [<ffffffff815e7f11>] do_setlink+0x321/0x9a0 [ 115.621174] [<ffffffff810d394c>] ? __lock_acquire+0x37c/0x1a60 [ 115.621174] [<ffffffff815ea59f>] rtnl_newlink+0x51f/0x730 [ 115.621174] [<ffffffff815ea169>] ? rtnl_newlink+0xe9/0x730 [ 115.621174] [<ffffffff815e6e75>] rtnetlink_rcv_msg+0x95/0x250 [ 115.621174] [<ffffffff810d329d>] ? trace_hardirqs_on+0xd/0x10 [ 115.621174] [<ffffffff815e6dbb>] ? rtnetlink_rcv+0x1b/0x40 [ 115.621174] [<ffffffff815e6de0>] ? rtnetlink_rcv+0x40/0x40 [ 115.621174] [<ffffffff81608b19>] netlink_rcv_skb+0xa9/0xc0 [ 115.621174] [<ffffffff815e6dca>] rtnetlink_rcv+0x2a/0x40 [ 115.621174] [<ffffffff81608150>] netlink_unicast+0xf0/0x1c0 [ 115.621174] [<ffffffff8160851f>] netlink_sendmsg+0x2ff/0x740 [ 115.621174] [<ffffffff815bc9db>] sock_sendmsg+0x8b/0xc0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff8119d4f8>] ? might_fault+0xa8/0xb0 [ 115.621174] [<ffffffff8119d4af>] ? might_fault+0x5f/0xb0 [ 115.621174] [<ffffffff815cb51e>] ? verify_iovec+0x5e/0xe0 [ 115.621174] [<ffffffff815bd4b9>] ___sys_sendmsg+0x369/0x380 [ 115.621174] [<ffffffff816faa0d>] ? __do_page_fault+0x11d/0x570 [ 115.621174] [<ffffffff810cfe9f>] ? up_read+0x1f/0x40 [ 115.621174] [<ffffffff816fab04>] ? __do_page_fault+0x214/0x570 [ 115.621174] [<ffffffff8120a10b>] ? mntput_no_expire+0x6b/0x1c0 [ 115.621174] [<ffffffff8120a0b7>] ? mntput_no_expire+0x17/0x1c0 [ 115.621174] [<ffffffff8120a284>] ? mntput+0x24/0x40 [ 115.621174] [<ffffffff815bdbb2>] __sys_sendmsg+0x42/0x80 [ 115.621174] [<ffffffff815bdc02>] SyS_sendmsg+0x12/0x20 [ 115.621174] [<ffffffff816ffd69>] system_call_fastpath+0x16/0x1b Fix this by correctly providing macvlan lockdep class. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-15macvlan: simplify the structure portdingtianhong1-7/+5
The port->count was used to count the number of macvlan devs in the same port, but the list vlans could play the same role to do that, so free the port if the list vlans is empty and no need to use the parameter count. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14macvlan: Propagate lowerdev MTU changesdingtianhong1-0/+7
When the physical MTU changes we should ensure that all existing MACVLAN dev MTU do not exceed the new lowerdev MTU. This patch adds that propagation. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12macvlan: Don't propagate IFF_ALLMULTI changes on down interfaces.Peter Christensen1-2/+4
Clearing the IFF_ALLMULTI flag on a down interface could cause an allmulti overflow on the underlying interface. Attempting the set IFF_ALLMULTI on the underlying interface would cause an error and the log message: "allmulti touches root, set allmulti failed." Signed-off-by: Peter Christensen <pch@ordbogen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+0
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-30Revert "macvlan : fix checksums error when we are in bridge mode"Vlad Yasevich1-3/+0
This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019. The commit above doesn't appear to be necessary any more as the checksums appear to be correctly computed/validated. Additionally the above commit breaks kvm configurations where one VM is using a device that support checksum offload (virtio) and the other VM does not. In this case, packets leaving virtio device will have CHECKSUM_PARTIAL set. The packets is forwarded to a macvtap that has offload features turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not update the checksum and thus a bad checksum is passed up to the guest. CC: Daniel Lezcano <daniel.lezcano@free.fr> CC: Patrick McHardy <kaber@trash.net> CC: Andrian Nord <nightnord@gmail.com> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Jason Wang <jasowang@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23macvlan: Fix leak and NULL dereference on error pathHerbert Xu1-4/+7
The recent patch that moved broadcasts to process context added a couple of bugs on the error path where we may dereference NULL or leak an skb. This patch fixes them. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-20macvlan: Move broadcasts into a work queueHerbert Xu1-23/+93
Currently broadcasts are handled in network RX context, where the packets are sent through netif_rx. This means that the number of macvlans will be constrained by the capacity of netif_rx. For example, setting up 4096 macvlans practically causes all broadcast packets to be dropped as the default netif_rx queue size simply can't handle 4096 skbs being stuffed into it all at once. Fundamentally, we need to ensure that the amount of work handled in each netif_rx backlog run is constrained. As broadcasts are anything but constrained, it either needs to be limited per run or moved to process context. This patch picks the second option and moves all broadcast handling bar the trivial case of packets going to a single interface into a work queue. Obviously there also needs to be a limit on how many broadcast packets we postpone in this way. I've arbitrarily chosen tx_queue_len of the master device as the limit (act_mirred also happens to use this parameter in a similar way). In order to ensure we don't exceed the backlog queue we will use netif_rx_ni instead of netif_rx for broadcast packets. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14net: Replace u64_stats_fetch_begin_bh to u64_stats_fetch_begin_irqEric W. Biederman1-2/+2
Replace the bh safe variant with the hard irq safe variant. We need a hard irq safe variant to deal with netpoll transmitting packets from hard irq context, and we need it in most if not all of the places using the bh safe variant. Except on 32bit uni-processor the code is exactly the same so don't bother with a bh variant, just have a hard irq safe variant that everyone can use. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+5
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-03macvlan: Add support for 'always_on' offload featuresVlad Yasevich1-2/+5
Macvlan currently inherits all of its features from the lower device. When lower device disables offload support, this causes macvlan to disable offload support as well. This causes performance regression when using macvlan/macvtap in bridge mode. It can be easily demonstrated by creating 2 namespaces using macvlan in bridge mode and running netperf between them: MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 1204.61 To restore the performance, we add software offload features to the list of "always_on" features for macvlan. This way when a namespace or a guest using macvtap initially sends a packet, this packet will not be segmented at macvlan level. It will only be segmented when macvlan sends the packet to the lower device. MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 20.00 5507.35 Fixes: 6acf54f1cf0a6747bac9fea26f34cfc5a9029523 (macvtap: Add support of packet capture on macvtap device.) Fixes: 797f87f83b60685ff8a13fa0572d2f10393c50d3 (macvlan: fix netdev feature propagation from lower device) CC: Florian Westphal <fw@strlen.de> CC: Christian Borntraeger <borntraeger@de.ibm.com> CC: Jason Wang <jasowang@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14net: introduce netdev_alloc_pcpu_stats() for driversWANG Cong1-8/+1
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-13macvlan: unregister net device when netdev_upper_dev_link() failsCong Wang1-2/+3
rtnl_newlink() doesn't unregister it for us on failure. Cc: Patrick McHardy <kaber@trash.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+7
2014-01-10net: core: explicitly select a txq before doing l2 forwardingJason Wang1-6/+3
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10macvlan: forbid L2 fowarding offload for macvtapJason Wang1-1/+4
L2 fowarding offload will bypass the rx handler of real device. This will make the packet could not be forwarded to macvtap device. Another problem is the dev_hard_start_xmit() called for macvtap does not have any synchronization. Fix this by forbidding L2 forwarding for macvtap. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: John Fastabend <john.r.fastabend@intel.com.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-06Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+13
Conflicts: drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c net/ipv6/ip6_tunnel.c net/ipv6/ip6_vti.c ipv6 tunnel statistic bug fixes conflicting with consolidation into generic sw per-cpu net stats. qlogic conflict between queue counting bug fix and the addition of multiple MAC address support. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-04macvlan: unify macvlan_pcpu_stats and vlan_pcpu_statsLi RongQing1-4/+4
They are same, so unify them as one; since macvlan is a kind of vlan, vlan_pcpu_stats should be a proper name for vlan and macvlan. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-28macvlan: make start_xmit localstephen hemminger1-3/+2
Only used in one file, no need to expose Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-26macvlan: fix netdev feature propagation from lower deviceFlorian Westphal1-3/+13
There are inconsistencies wrt. feature propagation/inheritance between macvlan and the underlying interface. When a feature is turned off on the real device before a macvlan is created on top, these will remain enabled on the macvlan device, whereas turning off the feature on the lower device after macvlan creation the kernel will propagate the changes to the macvlan. The second issue is that, when propagating changes from underlying device to the macvlan interface, macvlan can erronously lose its NETIF_F_LLTX flag, as features are anded with the underlying device. However, LLTX should be kept since it has no dependencies on physical hardware (LLTX is set on macvlan creation regardless of the lower device properties, see 8ffab51b3dfc54876f145f15b351c41f3f703195 (macvlan: lockless tx path). The LLTX flag is now forced regardless of user settings in absence of layer2 hw acceleration (a6cc0cfa72e0b6d9f2c8fd858aa, net: Add layer 2 hardware acceleration operations for macvlan devices). Use netdev_increment_features to rebuild the feature set on capability changes on either the lower device or on the macvlan interface. As pointed out by Ben Hutchings, use netdev_update_features on NETDEV_FEAT_CHANGE event (it calls macvlan_fix_features/netdev_features_change if needed). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12macvlan: Remove custom recieve and forward handlersVlad Yasevich1-12/+5
Since now macvlan and macvtap use the same receive and forward handlers, we can remove them completely and use netif_rx and dev_forward_skb() directly. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05macvlan: Support creating macvtaps from macvlansKevin Wallace1-5/+3
When running in a network namespace whose only link to the outside world is a macvlan device, not being able to create a macvtap off of it is a real pain. So modify macvtap creation to automatically forward a creation of a macvtap on a macvlan to become a creation of a macvtap on the underlying network device, just like is currently done with macvlan-on-macvlan devices. v2: Use netif_is_macvlan and macvlan_dev_real_dev helpers to make it more clear what we're doing. Signed-off-by: Kevin Wallace <kevin@pentabarf.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14Merge branch 'core-locking-for-linus' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core locking changes from Ingo Molnar: "The biggest changes: - add lockdep support for seqcount/seqlocks structures, this unearthed both bugs and required extra annotation. - move the various kernel locking primitives to the new kernel/locking/ directory" * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) block: Use u64_stats_init() to initialize seqcounts locking/lockdep: Mark __lockdep_count_forward_deps() as static lockdep/proc: Fix lock-time avg computation locking/doc: Update references to kernel/mutex.c ipv6: Fix possible ipv6 seqlock deadlock cpuset: Fix potential deadlock w/ set_mems_allowed seqcount: Add lockdep functionality to seqcount/seqlock structures net: Explicitly initialize u64_stats_sync structures for lockdep locking: Move the percpu-rwsem code to kernel/locking/ locking: Move the lglocks code to kernel/locking/ locking: Move the rwsem code to kernel/locking/ locking: Move the rtmutex code to kernel/locking/ locking: Move the semaphore core to kernel/locking/ locking: Move the spinlock code to kernel/locking/ locking: Move the lockdep code to kernel/locking/ locking: Move the mutex code to kernel/locking/ hung_task debugging: Add tracepoint to report the hang x86/locking/kconfig: Update paravirt spinlock Kconfig description lockstat: Report avg wait and hold times lockdep, x86/alternatives: Drop ancient lockdep fixup message ...
2013-11-07net: Add layer 2 hardware acceleration operations for macvlan devicesJohn Fastabend1-1/+35
Add a operations structure that allows a network interface to export the fact that it supports package forwarding in hardware between physical interfaces and other mac layer devices assigned to it (such as macvlans). This operaions structure can be used by virtual mac devices to bypass software switching so that forwarding can be done in hardware more efficiently. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-06net: Explicitly initialize u64_stats_sync structures for lockdepJohn Stultz1-0/+7
In order to enable lockdep on seqcount/seqlock structures, we must explicitly initialize any locks. The u64_stats_sync structure, uses a seqcount, and thus we need to introduce a u64_stats_init() function and use it to initialize the structure. This unfortunately adds a lot of fairly trivial initialization code to a number of drivers. But the benefit of ensuring correctness makes this worth while. Because these changes are required for lockdep to be enabled, and the changes are quite trivial, I've not yet split this patch out into 30-some separate patches, as I figured it would be better to get the various maintainers thoughts on how to best merge this change along with the seqcount lockdep enablement. Feedback would be appreciated! Signed-off-by: John Stultz <john.stultz@linaro.org> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: James Morris <jmorris@namei.org> Cc: Jesse Gross <jesse@nicira.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mirko Lindner <mlindner@marvell.com> Cc: Patrick McHardy <kaber@trash.net> Cc: Roger Luethi <rl@hellgate.ch> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Simon Horman <horms@verge.net.au> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Wensong Zhang <wensong@linux-vs.org> Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-22macvlan: resolve ENOENT errors on creationJohn Fastabend1-6/+5
After the commit below attempting to create macvlan devices was resulting in ENOENT errors, # ip link add link p3p2 type macvlan RTNETLINK answers: Invalid argument This happens because netdev_upper_dev_link() is called before register_netdevice() in the macvlan code. Through a call chain this results in a call to __netdev_adjacent_dev_insert() and finally a sysfs_create_link(). This requires the kobject of the macvlan to be registered which is done in register_netdevice(). If there is no kobject which is the case here the ENOENT error is seen on the command line. To resolve this move the netdev_upper_dev_link() call below the register_netdevice() call. This aligns with vlan driver flow. Regression introduced here, commit 5831d66e8097aedfa3bc35941cf265ada2352317 Author: Veaceslav Falico <vfalico@redhat.com> Date: Wed Sep 25 09:20:32 2013 +0200 net: create sysfs symlinks for neighbour devices CC: Veaceslav Falico <vfalico@redhat.com> CC: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11macvlan: Move skb_clone check closer to callHerbert Xu1-4/+6
Currently macvlan calls skb_clone in macvlan_broadcast but checks for a NULL return in macvlan_broadcast_one instead. This is needlessly confusing and may lead to bugs introduced later. This patch moves the error check to where the skb_clone call is. The only other caller of macvlan_broadcast_one never passes in a NULL value so it doesn't need the check either. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Thanks, Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03net: macvlan: inherit addr_assign_type along with dev_addrBjørn Mork1-1/+1
A device inheriting a random or set address should reflect this in its addr_assign_type. Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30macvlan: fix typo in assignmentLutz Jaenicke1-1/+1
commit 3b04ddde02cf1b6f14f2697da5c20eca5715017f "[NET]: Move hardware header operations out of netdevice." moved the handling into macvlan setup adding dev->header_ops = &macvlan_hard_header_ops, At the end of the line the ',' should have been a ';' Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
2013-08-05macvlan: validate flagsMichael S. Tsirkin1-0/+4
commit df8ef8f3aaa6692970a436204c4429210addb23a macvlan: add FDB bridge ops and macvlan flags added a flags field to macvlan, which can be controlled from userspace. The idea is to make the interface future-proof so we can add flags and not new fields. However, flags value isn't validated, as a result, userspace can't detect which flags are supported. Cc: "David S. Miller" <davem@davemloft.net> Cc: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+19
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01macvlan: handle set_promiscuity failuresMichael S. Tsirkin1-2/+5
It's quite unlikely that dev_set_promiscuity will fail, but worth checking just in case. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01macvlan: better mode validationMichael S. Tsirkin1-2/+14
macvlan passthrough mode is special: it's not possible to switch to or from it through a netlink command. But if you try, the command will succeed, which is confusing. Validate input and return error to user. Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 23:50:40 +0000