summaryrefslogtreecommitdiff
path: root/drivers/message
AgeCommit message (Collapse)AuthorFilesLines
2015-11-12Merge tag '4.4-scsi-mkp' into miscJames Bottomley1-0/+4
SCSI queue for 4.4. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()Dan Carpenter1-0/+4
There is a static checker warning here because "bytes" is controlled by the user and we cap the upper bound with min() but allow negatives. Negative bytes will result in some nasty warning messages but are not super harmful. Anyway, no one needs negative bytes so let's just check for it and return NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-09scsi: use host wide tags by defaultChristoph Hellwig1-1/+0
This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-08-26mptfusion: prevent some memory corruptionDan Carpenter1-0/+9
These are signed values the come from the user, we put a cap on the upper bounds but not on the lower bounds. We use "karg.dataSgeOffset" to calculate "sz". We verify "sz" and proceed as if that means that "karg.dataSgeOffset" is correct but this fails to consider that the "sz" calculations can have integer overflows. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13fusion: remove dead MTRR codeLuis R. Rodriguez2-25/+0
If and when this gets enabled the driver could should split up IO memory space properly and that is quite a bit of work. Just remove the uncommented dead MTRR code then. There are a few motivations for this: a) Take advantage of PAT when available b) Help bury MTRR code away, MTRR is architecture specific and on x86 its replaced by PAT c) Help with the goal of eventually using _PAGE_CACHE_UC over _PAGE_CACHE_UC_MINUS on x86 on ioremap_nocache() (see commit de33c442e titled "x86 PAT: fix performance drop for glx, use UC minus for ioremap(), ioremap_nocache() and pci_mmap_page_range()") Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Acked-by: Sreekanth Reddy <ureekanth.reddy@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-06-13mptsas: fix depth param in scsi_track_queue_fullTomas Henzl1-2/+2
A user of scsi_track_queue_full should pass to the function a constant value untill the queue-depth changes, otherwise the internal logic in scsi_track_queue_full rejects the change. Other users of this function use a 'sdev->queue_depth - 1' as depth parameter, let's do the same. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: "Sreekanth Reddy" <Sreekanth.reddy@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-02-03i2o: move to stagingAlan Cox20-10435/+0
The I2O layer deals with a technology that to say the least didn't catch on in the market. The only relevant products are some of the AMI MegaRAID - which supported I2O and its native mode (The native mode is faster and runs on Linux), an obscure crypto ethernet card that's now so many years out of date nobody would use it, the old DPT controllers, which speak their own dialect and have their own driver - and ermm.. thats about it. We also know the code isn't in good shape as recently a patch was proposed and queried as buggy, which in turn showed the existing code was broken already by prior "clean up" and nobody had noticed that either. It's coding style robot code nothing more. Like some forgotten corridor cleaned relentlessly by a lost Roomba but where no user has trodden in years. Move it to staging and then to /dev/null. The headers remain as they are shared with dpt_i2o. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-24scsi: drop reason argument from ->change_queue_depthChristoph Hellwig2-11/+4
Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: don't set tagging state from scsi_adjust_queue_depthChristoph Hellwig1-1/+1
Remove the tagged argument from scsi_adjust_queue_depth, and just let it handle the queue depth. For most drivers those two are fairly separate, given that most modern drivers don't care about the SCSI "tagged" status of a command at all, and many old drivers allow queuing of multiple untagged commands in the driver. Instead we start out with the ->simple_tags flag set before calling ->slave_configure, which is how all drivers actually looking at ->simple_tags except for one worke anyway. The one other case looks broken, but I've kept the behavior as-is for now. Except for that we only change ->simple_tags from the ->change_queue_type, and when rejecting a tag message in a single driver, so keeping this churn out of scsi_adjust_queue_depth is a clear win. Now that the usage of scsi_adjust_queue_depth is more obvious we can also remove all the trivial instances in ->slave_alloc or ->slave_configure that just set it to the cmd_per_lun default. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-11-12scsi: always assign block layer tags if enabledChristoph Hellwig1-0/+1
Allow a driver to ask for block layer tags by setting .use_blk_tags in the host template, in which case it will always see a valid value in request->tag, similar to the behavior when using blk-mq. This means even SCSI "untagged" commands will now have a tag, which is especially useful when using a host-wide tag map. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12mptfusion: don't change queue type in ->change_queue_depthChristoph Hellwig1-6/+1
This function shouldn't change the queue type, just the depth. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-11-12scsi: remove ordered_tags scsi_device fieldChristoph Hellwig1-3/+2
Remove the ordered_tags field, we haven't been issuing ordered tags based on it since the big barrier rework in 2010. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
2014-10-07Merge tag 'scsi-for-linus' of ↵Linus Torvalds3-13/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This patch set consists of the usual driver updates (megaraid_sas, arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several assorted fixes and miscellaneous updates (including the pci_msix_enable_range() changes that have been pending for a while)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits) scsi: add a CONFIG_SCSI_MQ_DEFAULT option ufs: definitions for phy interface ufs: tune bkops while power managment events ufs: Add support for clock scaling using devfreq framework ufs: Add freq-table-hz property for UFS device ufs: Add support for clock gating ufs: refactor configuring power mode ufs: add UFS power management support ufs: introduce well known logical unit in ufs ufs: manually add well known logical units ufs: Active Power Mode - configuring bActiveICCLevel ufs: improve init sequence ufs: refactor query descriptor API support ufs: add voting support for host controller power ufs: Add clock initialization support ufs: Add regulator enable support ufs: Allow vendor specific initialization scsi: don't add scsi_device if its already visible scsi: fix the type for well known LUs scsi: fix comment in struct Scsi_Host definition ...
2014-09-25mptfusion: enable no_write_same for vmware scsi disksChris J Arges1-0/+5
When using a virtual SCSI disk in a VMWare VM if blkdev_issue_zeroout is used data can be improperly zeroed out using the mptfusion driver. This patch disables write_same for this driver and the vmware subsystem_vendor which ensures that manual zeroing out is used instead. Cc: stable@vger.kernel.org BugLink: http://bugs.launchpad.net/bugs/1371591 Reported-by: Bruce Lucas <bruce.lucas@mongodb.com> Tested-by: Chris J Arges <chris.j.arges@canonical.com> Signed-off-by: Chris J Arges <chris.j.arges@canonical.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16scsi: use 'depends' instead of 'select' for SCSI_FC_ATTRSRandy Dunlap1-1/+1
There are other kconfig symbols which use SCSI_FC_ATTRS. In order to maintain sanity and prevent kconfig warnings, change all of these from using 'select' to using 'depends on' so that proper symbol dependencies will be honored and circular depends problems will be avoided. This fixes kconfig warnings and build errors: warning: (LIBFC && SCSI_IBMVFC && SCSI_QLA_FC && SCSI_LPFC && ZFCP && SCSI_BFA_FC && SCSI_CHELSIO_FCOE && FUSION_FC) selects SCSI_FC_ATTRS which has unmet direct dependencies (SCSI && NET) drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_event': drivers/scsi/scsi_transport_fc.c:543:7: error: 'scsi_nl_sock' undeclared (first use in this function) drivers/scsi/scsi_transport_fc.c: In function 'fc_host_post_vendor_event': drivers/scsi/scsi_transport_fc.c:611:7: error: 'scsi_nl_sock' undeclared (first use in this function) Reported-by: Fengguang Wu <fengguang.wu@intel.com> [0-day test robot] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-16fusion: fix excess parameter kernel-doc warningRandy Dunlap1-1/+0
Fix kernel-doc excess parameter warning: Warning(..//drivers/message/fusion/mptbase.c:1411): Excess function parameter 'prod_name' description in 'mpt_get_product_name' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-09-16mptfusion: simplify roundingRasmus Villemoes2-12/+2
Rounding up to a multiple of 4 should be done using the ALIGN macro. As a bonus, this also makes the generated code smaller. In GetIocFacts(), sz is assigned to a few lines below without being read in the meantime, so it is ok that it doesn't end up with the same value as facts->FWImageSize. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25mptfusion: tweak null pointer checksJoe Lawrence3-44/+37
Fixes the following smatch warnings: drivers/message/fusion/mptbase.c:652 mptbase_reply() warn: variable dereferenced before check 'reply' (see line 639) [JL: No-brainer, the enclosing switch statement dereferences reply, so we can't get here unless reply is valid.] drivers/message/fusion/mptsas.c:1255 mptsas_taskmgmt_complete() error: we previously assumed 'pScsiTmReply' could be null (see line 1227) [HCH: Reading the code in mptsas_taskmgmt_complete it's pretty obvious that it can't do anything useful if mr/pScsiTmReply are NULL, so I suspect it would be best to just return at the beginning of the function. I'd love to understand if it actually could ever be zero, which I doubt. Maybe the LSI people can shed some light on that?] drivers/message/fusion/mptsas.c:3888 mptsas_not_responding_devices() error: we previously assumed 'port_info->phy_info' could be null (see line 3875) [HCH: It's pretty obvious from reading mptsas_sas_io_unit_pg0 that we never register a port_info with a NULL phy_info in the lists, so all NULL checks on it could be deleted.] drivers/message/fusion/mptscsih.c:1284 mptscsih_info() error: we previously assumed 'h' could be null (see line 1274) [HCH: shost_priv can't return NULL, so the if (h) should be removed.] drivers/message/fusion/mptscsih.c:1388 mptscsih_qcmd() error: we previously assumed 'vdevice' could be null (see line 1373) [HCH: vdevice can't ever be NULL here, it's allocated in ->slave_alloc and thus guaranteed to be around when ->queuecommand is called.] Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25mptfusion: combine fw_event_work and its event_dataJoe Lawrence2-11/+7
Tack the firmware reply event_data payload to the end of its corresponding struct fw_event_work allocation. Rework fw_event_work allocation calculations to include the event_data size where appropriate. This clarifies the code a bit and avoids the following smatch warnings: drivers/message/fusion/mptsas.c:1003 mptsas_queue_device_delete() error: memcpy() 'fw_event->event_data' too small (29 vs 36) drivers/message/fusion/mptsas.c:1017 mptsas_queue_rescan() error: not allocating enough data 168 vs 160 Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25mptfusion: make adapter prod_name[] a pointerJoe Lawrence2-7/+6
The struct _MPT_ADAPTER doesn't need a full copy of the product string, so prod_name can point to the string literal storage that the driver already provides. Avoids the following smatch warning: drivers/message/fusion/mptbase.c:2858 MptDisplayIocCapabilities() warn: this array is probably non-NULL. 'ioc->prod_name' Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25mptfusion: use memdup_userJoe Lawrence1-13/+5
Let memdup_user handle the kmalloc, copy_from_user and error checking kfree code. Spotted by the following smatch (false positive) warning: drivers/message/fusion/mptctl.c:1369 mptctl_getiocinfo() warn: possible info leak 'karg' Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25mptfusion: remove redundant kfree checksJoe Lawrence2-4/+2
Fixes the following smatch warnings: drivers/message/fusion/mptfc.c:529 mptfc_target_destroy() info: redundant null check on starget->hostdata calling kfree() drivers/message/fusion/mptspi.c:465 mptspi_target_destroy() info: redundant null check on starget->hostdata calling kfree() Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25mptfusion: mark file-private functions as staticJoe Lawrence3-5/+5
Fixes the following sparse warnings: drivers/message/fusion/mptbase.c:7011:1: warning: symbol 'mpt_SoftResetHandler' was not declared. Should it be static? drivers/message/fusion/mptsas.c:1578:23: warning: symbol 'mptsas_refreshing_device_handles' was not declared. Should it be static? drivers/message/fusion/mptsas.c:3653:24: warning: symbol 'mptsas_expander_add' was not declared. Should it be static? drivers/message/fusion/mptsas.c:5327:1: warning: symbol 'mptsas_shutdown' was not declared. Should it be static? drivers/message/fusion/mptspi.c:624:1: warning: symbol 'mptscsih_quiesce_raid' was not declared. Should it be static? Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-25scsi: convert device_busy to atomic_tChristoph Hellwig1-1/+1
Avoid taking the queue_lock to check the per-device queue limit. Instead we do an atomic_inc_return early on to grab our slot in the queue, and if necessary decrement it after finishing all checks. Unlike the host and target busy counters this doesn't allow us to avoid the queue_lock in the request_fn due to the way the interface works, but it'll allow us to prepare for using the blk-mq code, which doesn't use the queue_lock at all, and it at least avoids a queue_lock round trip in scsi_device_unbusy, which is still important given how busy the queue_lock is. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Webb Scales <webbnh@hp.com> Acked-by: Jens Axboe <axboe@kernel.dk> Tested-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Robert Elliott <elliott@hp.com>
2014-07-17scsi: use 64-bit value for 'max_luns'Hannes Reinecke1-1/+1
Now that we're using 64-bit LUNs internally we need to increase the size of max_luns to 64 bits, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-17scsi: use 64-bit LUNsHannes Reinecke5-19/+18
The SCSI standard defines 64-bit values for LUNs, and large arrays employing large or hierarchical LUN numbers become more and more common. So update the linux SCSI stack to use 64-bit LUN numbers. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@infradead.org> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28mptfusion: fix msgContext in mptctl_hp_hostinfoTomas Henzl1-3/+3
Hi, without this patch the istwiRWRequest->MsgContext is always set to zero, this patch saves the MsgContext in a msgcontext variable and then restores the value. Thanks to David Jeffery who found the issue and did the analysis. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Desai, Kashyap <Kashyap.Desai@lsi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28fusion: Remove use of DEF_SCSI_QCMDMatthew Wilcox5-26/+18
Removing the host_lock from the I/O submission path gives a huge scalability improvement. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com> Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-05-28fusion: Add free msg frames to the head, not tail of listMatthew Wilcox1-1/+1
Reusing a msg frame quickly means it's still cache-hot. This yields a small but noticable performance improvement in a well-known database benchmark. This improvement is already present in the mpt3sas driver. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Reviewed-by: Praveen Krishnamoorthy <Praveen.krishnamoorthy@lsi.com> Acked-by: Sreekanth Reddy <Sreekanth.reddy@lsi.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-04-01Merge tag 'pci-v3.15-changes' of ↵Linus Torvalds1-43/+42
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Increment max correctly in pci_scan_bridge() (Andreas Noever) - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever) - Assign CardBus bus number only during the second pass (Andreas Noever) - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever) - Make sure bus number resources stay within their parents bounds (Andreas Noever) - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever) - Check for child busses which use more bus numbers than allocated (Andreas Noever) - Don't scan random busses in pci_scan_bridge() (Andreas Noever) - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas) - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas) - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas) - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas) NUMA - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas) - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas) - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas) - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas) - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas) - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas) - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas) Resource management - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas) - Add resource_contains() (Bjorn Helgaas) - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas) - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas) - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas) - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas) - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas) - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas) - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas) - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas) - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas) - s390: Use generic pci_enable_resources() (Bjorn Helgaas) - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas) - Set type in __request_region() (Bjorn Helgaas) - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas) - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas) - Log IDE resource quirk in dmesg (Bjorn Helgaas) - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas) PCI device hotplug - Make check_link_active() non-static (Rajat Jain) - Use link change notifications for hot-plug and removal (Rajat Jain) - Enable link state change notifications (Rajat Jain) - Don't disable the link permanently during removal (Rajat Jain) - Don't check adapter or latch status while disabling (Rajat Jain) - Disable link notification across slot reset (Rajat Jain) - Ensure very fast hotplug events are also processed (Rajat Jain) - Add hotplug_lock to serialize hotplug events (Rajat Jain) - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain) - Don't turn slot off when hot-added device already exists (Yijing Wang) MSI - Keep pci_enable_msi() documentation (Alexander Gordeev) - ahci: Fix broken single MSI fallback (Alexander Gordeev) - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev) - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman) - Fix leak of msi_attrs (Greg Kroah-Hartman) - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida) Virtualization - Device-specific ACS support (Alex Williamson) Freescale i.MX6 - Wait for retraining (Marek Vasut) Marvell MVEBU - Use Device ID and revision from underlying endpoint (Andrew Lunn) - Fix incorrect size for PCI aperture resources (Jason Gunthorpe) - Call request_resource() on the apertures (Jason Gunthorpe) - Fix potential issue in range parsing (Jean-Jacques Hiblot) Renesas R-Car - Check platform_get_irq() return code (Ben Dooks) - Add error interrupt handling (Ben Dooks) - Fix bridge logic configuration accesses (Ben Dooks) - Register each instance independently (Magnus Damm) - Break out window size handling (Magnus Damm) - Make the Kconfig dependencies more generic (Magnus Damm) Synopsys DesignWare - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar) Miscellaneous - Remove unused SR-IOV VF Migration support (Bjorn Helgaas) - Enable INTx if BIOS left them disabled (Bjorn Helgaas) - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter) - Clean up par-arch object file list (Liviu Dudau) - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom) - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang) - Fix pci_bus_b() build failure (Paul Gortmaker)" * tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits) Revert "[PATCH] Insert GART region into resource map" PCI: Log IDE resource quirk in dmesg PCI: Change pci_bus_alloc_resource() type_mask to unsigned long PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() resources: Set type in __request_region() PCI: Don't check resource_size() in pci_bus_alloc_resource() s390/PCI: Use generic pci_enable_resources() tile PCI RC: Use default pcibios_enable_device() sparc/PCI: Use default pcibios_enable_device() (Leon only) sh/PCI: Use default pcibios_enable_device() microblaze/PCI: Use default pcibios_enable_device() alpha/PCI: Use default pcibios_enable_device() PCI: Add "weak" generic pcibios_enable_device() implementation PCI: Don't enable decoding if BAR hasn't been assigned an address PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit PCI: Don't try to claim IORESOURCE_UNSET resources PCI: Check IORESOURCE_UNSET before updating BAR PCI: Don't clear IORESOURCE_UNSET when updating BAR PCI: Mark resources as IORESOURCE_UNSET if we can't assign them ... Conflicts: arch/x86/include/asm/topology.h drivers/ata/ahci.c
2014-02-26i2o: Use pci_bus_alloc_resource(), not allocate_resource() directlyBjorn Helgaas1-10/+6
Convert i2o_res_alloc() to use pci_bus_alloc_resource() rather than pci_find_parent_resource() and allocate_resource(). We don't have a resource to start with, so pci_find_parent_resource() can't do anything useful: a bus may have several memory resources available, so there might be several possible parents. This is more likely on root buses because host bridges may have any number of apertures. I'm pretty sure this didn't work in the first place because it passed size == min == max to allocate_resource(). The min and max parameters are constraints on the *addresses* of the resource, not on its size, so I think it was impossible for allocate_resource() to succeed. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-26i2o: Refactor i2o_iop_systab_set() PCI space allocationBjorn Helgaas1-43/+46
Refactor the PCI space allocation in i2o_iop_systab_set(). This might improve readability slightly, but mainly it is to make the next patch simpler. No functional change. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-26i2o: Fix I/O space alignment requirementBjorn Helgaas1-1/+1
When i2o_iop_systab_set() allocates I/O port space, it specifies 1Mb alignment required. This seems unlikely, since most platforms have only 64Kb of I/O space total. I think 4Kb is a more reasonable choice, since that's the minimum alignment of a PCI-PCI bridge I/O window. My guess is that this is a copy/paste error from the memory allocation code, which specifies 1Mb alignment (which is the minimum alignment of a PCI-PCI bridge memory window). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-26i2o: Fix I/O space allocation copy/paste errorBjorn Helgaas1-1/+1
When i2o_iop_systab_set() allocates I/O port space, it assigns the base of the new I/O port region to sb->current_mem_base, not sb->current_io_base. This looks like a copy/paste error, because we do use current_io_base, but there's no other place that sets it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-02-10drivers/message/i2o/i2o_config.c: fix deadlock in compat_ioctl(I2OGETIOPS)Alexey Khoroshilov1-2/+2
i2o_cfg_compat_ioctl(I2OGETIOPS) locks i2o_cfg_mutex and then calls i2o_cfg_ioctl(I2OGETIOPS) that locks i2o_cfg_mutex as well. A deadlock is guaranteed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-4/+4
Pull core block IO changes from Jens Axboe: "The major piece in here is the immutable bio_ve series from Kent, the rest is fairly minor. It was supposed to go in last round, but various issues pushed it to this release instead. The pull request contains: - Various smaller blk-mq fixes from different folks. Nothing major here, just minor fixes and cleanups. - Fix for a memory leak in the error path in the block ioctl code from Christian Engelmayer. - Header export fix from CaiZhiyong. - Finally the immutable biovec changes from Kent Overstreet. This enables some nice future work on making arbitrarily sized bios possible, and splitting more efficient. Related fixes to immutable bio_vecs: - dm-cache immutable fixup from Mike Snitzer. - btrfs immutable fixup from Muthu Kumar. - bio-integrity fix from Nic Bellinger, which is also going to stable" * 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits) xtensa: fixup simdisk driver to work with immutable bio_vecs block/blk-mq-cpu.c: use hotcpu_notifier() blk-mq: for_each_* macro correctness block: Fix memory leak in rw_copy_check_uvector() handling bio-integrity: Fix bio_integrity_verify segment start bug block: remove unrelated header files and export symbol blk-mq: uses page->list incorrectly blk-mq: use __smp_call_function_single directly btrfs: fix missing increment of bi_remaining Revert "block: Warn and free bio if bi_end_io is not set" block: Warn and free bio if bi_end_io is not set blk-mq: fix initializing request's start time block: blk-mq: don't export blk_mq_free_queue() block: blk-mq: make blk_sync_queue support mq block: blk-mq: support draining mq queue dm cache: increment bi_remaining when bi_end_io is restored block: fixup for generic bio chaining block: Really silence spurious compiler warnings block: Silence spurious compiler warnings block: Kill bio_pair_split() ...
2014-01-14MPT / PCI: Use pci_stop_and_remove_bus_device_locked()Rafael J. Wysocki1-1/+1
Race conditions are theoretically possible between the MPT PCI device removal and the generic PCI bus rescan and device removal that can be triggered via sysfs. To avoid those race conditions make the MPT PCI code use pci_stop_and_remove_bus_device_locked(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-11-23block: Kill bio_segments()/bi_vcnt usageKent Overstreet1-4/+4
When we start sharing biovecs, keeping bi_vcnt accurate for splits is going to be error prone - and unnecessary, if we refactor some code. So bio_segments() has to go - but most of the existing users just needed to know if the bio had multiple segments, which is easier - add a bio_multiple_segments() for them. (Two of the current uses of bio_segments() are going to go away in a couple patches, but the current implementation of bio_segments() is unsafe as soon as we start doing driver conversions for immutable biovecs - so implement a dumb version for bisectability, it'll go away in a couple patches) Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Neil Brown <neilb@suse.de> Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
2013-11-13drivers/message/i2o/driver.c: add missing destroy_workqueue() on error in ↵Wei Yongjun1-6/+10
i2o_driver_register() Add the missing destroy_workqueue() before return from i2o_driver_register() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-16i2o: convert bus code to use dev_groupsGreg Kroah-Hartman3-13/+23
The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the i2o bus code to use the correct field. Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03drivers: avoid format strings in names passed to alloc_workqueue()Kees Cook1-2/+2
For the workqueue creation interfaces that do not expect format strings, make sure they cannot accidently be parsed that way. Additionally, clean up calls made with a single parameter that would be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-08Merge branch 'for-3.10/core' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+3
Pull block core updates from Jens Axboe: - Major bit is Kents prep work for immutable bio vecs. - Stable candidate fix for a scheduling-while-atomic in the queue bypass operation. - Fix for the hang on exceeded rq->datalen 32-bit unsigned when merging discard bios. - Tejuns changes to convert the writeback thread pool to the generic workqueue mechanism. - Runtime PM framework, SCSI patches exists on top of these in James' tree. - A few random fixes. * 'for-3.10/core' of git://git.kernel.dk/linux-block: (40 commits) relay: move remove_buf_file inside relay_close_buf partitions/efi.c: replace useless kzalloc's by kmalloc's fs/block_dev.c: fix iov_shorten() criteria in blkdev_aio_read() block: fix max discard sectors limit blkcg: fix "scheduling while atomic" in blk_queue_bypass_start Documentation: cfq-iosched: update documentation help for cfq tunables writeback: expose the bdi_wq workqueue writeback: replace custom worker pool implementation with unbound workqueue writeback: remove unused bdi_pending_list aoe: Fix unitialized var usage bio-integrity: Add explicit field for owner of bip_buf block: Add an explicit bio flag for bios that own their bvec block: Add bio_alloc_pages() block: Convert some code to bio_for_each_segment_all() block: Add bio_for_each_segment_all() bounce: Refactor __blk_queue_bounce to not use bi_io_vec raid1: use bio_copy_data() pktcdvd: Use bio_reset() in disabled code to kill bi_idx usage pktcdvd: use bio_copy_data() block: Add bio_copy_data() ...
2013-05-07block_device_operations->release() should return voidAl Viro1-6/+2
The value passed is 0 in all but "it can never happen" cases (and those only in a couple of drivers) *and* it would've been lost on the way out anyway, even if something tried to pass something meaningful. Just don't bother. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds8-180/+35
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01proc: Add proc_mkdir_data()David Howells1-6/+2
Add proc_mkdir_data() to allow procfs directories to be created that are annotated at the time of creation with private data rather than doing this post-creation. This means no access is then required to the proc_dir_entry struct to set this. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Neela Syam Kolli <megaraidlinux@lsi.com> cc: Jerry Chuang <jerry-chuang@realtek.com> cc: linux-scsi@vger.kernel.org cc: devel@driverdev.osuosl.org cc: linux-wireless@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-30i2o: check copy_from_user() size parameterDan Carpenter1-0/+10
Limit the size of the copy so we don't corrupt memory. Hopefully this can only be called by root, but fixing this makes the static checkers happier. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Masanari Iida <standby24x7@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mptctl: don't wank with fasync in ->release()Al Viro1-8/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09procfs: new helper - PDE_DATA(inode)Al Viro2-21/+21
The only part of proc_dir_entry the code outside of fs/proc really cares about is PDE(inode)->data. Provide a helper for that; static inline for now, eventually will be moved to fs/proc, along with the knowledge of struct proc_dir_entry layout. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09fusion: switch to ->show_info()Al Viro5-95/+11
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09i2o: use proc_remove_subtree()Al Viro1-50/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 05:07:42 +0000