summaryrefslogtreecommitdiff
path: root/drivers/dma/tegra20-apb-dma.c
AgeCommit message (Collapse)AuthorFilesLines
2015-08-20dmaengine: tegra-apb: Simplify locking for device using global pauseJon Hunter1-4/+28
Sparse reports the following with regard to locking in the tegra_dma_global_pause() and tegra_dma_global_resume() functions: drivers/dma/tegra20-apb-dma.c:362:9: warning: context imbalance in 'tegra_dma_global_pause' - wrong count at exit drivers/dma/tegra20-apb-dma.c:366:13: warning: context imbalance in 'tegra_dma_global_resume' - unexpected unlock The warning is caused because tegra_dma_global_pause() acquires a lock but does not release it. However, the lock is released by tegra_dma_global_resume(). These pause/resume functions are called in pairs and so it does appear to work. This global pause is used on early tegra devices that do not have an individual pause for each channel. The lock appears to be used to ensure that multiple channels do not attempt to assert/de-assert the global pause at the same time which could cause the DMA controller to be in the wrong paused state. Rather than locking around the entire code between the pause and resume, employ a simple counter to keep track of the global pause requests. By using a counter, it is only necessary to hold the lock when pausing and unpausing the DMA controller and hence, fixes the sparse warning. Please note that for devices that support individual channel pausing, the DMA controller lock is not held between pausing and unpausing the channel. Hence, this change will make the devices that use the global pause behave in the same way, with regard to locking, as those that don't. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-20dmaengine: tegra-apb: Remove unnecessary return statements and variablesJon Hunter1-12/+4
Some void functions have unnecessary return statements at the end (reported by sparse) and so remove these. Also remove the return variables from functions tegra_dma_prep_slave_sg() and tegra_dma_prep_slave_cyclic() because the value is not used. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-20dmaengine: tegra-apb: Avoid unnecessary channel base address calculationJon Hunter1-5/+6
Everytime a DMA channel register is accessed, the channel base address is calculated by adding the DMA base address and the channel register offset. Avoid this calculation and simply calculate the channel base address once at probe time for each DMA channel. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-20dmaengine: tegra-apb: Remove unused variablesJon Hunter1-4/+0
The callback and callback_param members of the tegra_dma_sg_req structure are never used. The dma-engine structure, dma_async_tx_descriptor, defines the same members and these are the ones used by the driver. Therefore, remove the unused versions from the tegra_dma_sg_req structure. The half_done member of tegra_dma_channel structure is configured but never used and so remove it. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-01-14dmaengine: tegra: add slave capabilities reportingPaul Walmsley1-0/+15
After commit ecc19d17868be9c9f8f00ed928791533c420f3e0 ("dmaengine: Add a warning for drivers not using the generic slave caps retrieval"), the Tegra APB DMA driver causes this warning during boot: WARNING: CPU: 0 PID: 1 at drivers/dma/dmaengine.c:830 dma_async_device_register+0x294/0x538() this driver doesn't support generic slave capabilities reporting Fix by setting the appropriate reporting structure fields that are passed to dma_async_device_register(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: tegra: fix incompatible pointer type warnsVinod Koul1-2/+3
drivers/dma/tegra20-apb-dma.c:1428:37: warning: assignment from incompatible pointer type [enabled by default] drivers/dma/ste_dma40.c: In function 'd40_terminate_all': The function prototype expects return type 'int' whereas these where void Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: tegra20: Split device_controlMaxime Ripard1-20/+2
Split the device_control callback of the NVidia Tegra20 APB DMA driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-12Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+0
Pull dmaengine updates from Vinod Koul: "Main features this time are: - BAM v1.3.0 support form qcom bam dma - support for Allwinner sun8i dma - atmels eXtended DMA Controller driver - chancnt cleanup by Maxime - fixes spread over drivers" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits) dmaenegine: Delete a check before free_percpu() dmaengine: ioatdma: fix dma mapping errors dma: cppi41: add a delay while setting the TD bit dma: cppi41: wait longer for the HW to return the descriptor dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model dmaengine: fsl-edma: fix calculation of remaining bytes drivers/dma/pch_dma: declare pch_dma_id_table as static dmaengine: ste_dma40: fix error return code dma: imx-sdma: clarify about firmware not found error Documentation: devicetree: Fix Xilinx VDMA specification dmaengine: pl330: update author info dmaengine: clarify the issue_pending expectations dmaengine: at_xdmac: Add DMA_PRIVATE ARM: dts: at_xdmac: fix bad value of dma-cells in documentation dmaengine: at_xdmac: fix missing spin_unlock dmaengine: at_xdmac: fix a bug in transfer residue computation dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status() dmaengine: at_xdmac: remove chancnt affectation dmaengine: at_xdmac: prefer usage of readl/writel_relaxed dmaengine: xdmac: fix print warning on dma_addr_t variable ...
2014-12-05dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PMRafael J. Wysocki1-1/+1
After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so #ifdef blocks depending on CONFIG_PM_RUNTIME may now be changed to depend on CONFIG_PM. Replace CONFIG_PM_RUNTIME with CONFIG_PM in drivers/dma/nbpfaxi.c and drivers/dma/tegra20-apb-dma.c. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com>
2014-11-06dmaengine: Remove .owner field for driverKiran Padwal1-1/+0
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> [for nvidia] Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-08-04dmaengine: Remove the context argument to the prep_dma_cyclic operationLaurent Pinchart1-1/+1
The argument is always set to NULL and never used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-7/+55
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
2014-01-20dma: tegra: add support for Tegra148/124Laxman Dewangan1-7/+55
Tegra148 introduces a few changes to the APB DMA HW registers. Update the driver to cope with them. Tegra124 inherits these changes. * The register address stride between DMA channels increases. * A new per-channel WCOUNT register is introduced. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Kunal Agrawal <kunala@nvidia.com> [swarren, remove .dts file change, rewrote commit description, removed some duplicate/unused code and register IO] Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-12-11dma: tegra: register as an OF DMA controllerStephen Warren1-3/+36
Call of_dma_controller_register() so that DMA clients can look up the Tegra DMA controller using standard APIs. This requires the of_xlate() function to save off the DMA slave ID, and for tegra_dma_slave_config() not to over-write this information; once DMA client drivers are converted to dma_request_slave_channel() and DT-based lookups, they won't set this field of struct dma_slave_config anymore. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Thierry Reding <treding@nvidia.com>
2013-12-11dma: tegra: use reset frameworkStephen Warren1-3/+10
Tegra's clock driver now provides an implementation of the common reset API (include/linux/reset.h). Use this instead of the old Tegra- specific API; that will soon be removed. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com>
2013-10-25dmaengine: tegra: use DMA_COMPLETE for dma completion statusVinod Koul1-2/+2
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-07dma: tegra20-apb-dma: Staticize tegra_dma_prep_dma_cyclicSachin Kamat1-1/+1
tegra_dma_prep_dma_cyclic is referenced only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-05tegra20-apb-dma: remove useless use of lockAndy Shevchenko1-5/+3
Accordingly to dma_cookie_status() description locking is not required. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-tegra@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: tegra: avoid channel lock up after freeDmitry Osipenko1-0/+1
Lock scenario: Channel 1 was allocated and prepared as slave_sg, used and freed. Now preparation of cyclic dma on channel 1 will fail with err "DMA configuration conflict" because tdc->isr_handler still setted to handle_once_dma_done. This happens because tegra_dma_abort_all() won't be called on channel freeing if pending list is empty and channel not busy. We need to clear isr_handler on channel freeing to avoid locking. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05dma: tegra20-apbdma: err message correctionDmitry Osipenko1-1/+1
Fixed err msg params order on irq request fail. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-18drivers/dma: don't check resource with devm_ioremap_resourceWolfram Sang1-5/+0
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Stephen Warren <swarren@nvidia.com>
2013-05-02dma: tegra: implement suspend/resume callbacksLaxman Dewangan1-0/+65
Implement suspend/resume callbacks to store APB DMA channel's register on suspend and restore APB DMA channel's register on resume. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-15dma: tegra: assume CONFIG_OFStephen Warren1-15/+7
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-26Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-6/+49
Pull slave-dmaengine updates from Vinod Koul: "This is fairly big pull by my standards as I had missed last merge window. So we have the support for device tree for slave-dmaengine, large updates to dw_dmac driver from Andy for reusing on different architectures. Along with this we have fixes on bunch of the drivers" Fix up trivial conflicts, usually due to #include line movement next to each other. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (111 commits) Revert "ARM: SPEAr13xx: Pass DW DMAC platform data from DT" ARM: dts: pl330: Add #dma-cells for generic dma binding support DMA: PL330: Register the DMA controller with the generic DMA helpers DMA: PL330: Add xlate function DMA: PL330: Add new pl330 filter for DT case. dma: tegra20-apb-dma: remove unnecessary assignment edma: do not waste memory for dma_mask dma: coh901318: set residue only if dma is in progress dma: coh901318: avoid unbalanced locking dmaengine.h: remove redundant else keyword dma: of-dma: protect list write operation by spin_lock dmaengine: ste_dma40: do not remove descriptors for cyclic transfers dma: of-dma.c: fix memory leakage dw_dmac: apply default dma_mask if needed dmaengine: ioat - fix spare sparse complain dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c ioatdma: fix race between updating ioat->head and IOAT_COMPLETION_PENDING dw_dmac: add support for Lynxpoint DMA controllers dw_dmac: return proper residue value dw_dmac: fill individual length of descriptor ...
2013-02-21Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+1
Pull ARM SoC-specific updates from Arnd Bergmann: "This is a larger set of new functionality for the existing SoC families, including: - vt8500 gains support for new CPU cores, notably the Cortex-A9 based wm8850 - prima2 gains support for the "marco" SoC family, its SMP based cousin - tegra gains support for the new Tegra4 (Tegra114) family - socfpga now supports a newer version of the hardware including SMP - i.mx31 and bcm2835 are now using DT probing for their clocks - lots of updates for sh-mobile - OMAP updates for clocks, power management and USB - i.mx6q and tegra now support cpuidle - kirkwood now supports PCIe hot plugging - tegra clock support is updated - tegra USB PHY probing gets implemented diffently" * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (148 commits) ARM: prima2: remove duplicate v7_invalidate_l1 ARM: shmobile: r8a7779: Correct TMU clock support again ARM: prima2: fix __init section for cpu hotplug ARM: OMAP: Consolidate OMAP USB-HS platform data (part 3/3) ARM: OMAP: Consolidate OMAP USB-HS platform data (part 1/3) arm: socfpga: Add SMP support for actual socfpga harware arm: Add v7_invalidate_l1 to cache-v7.S arm: socfpga: Add entries to enable make dtbs socfpga arm: socfpga: Add new device tree source for actual socfpga HW ARM: tegra: sort Kconfig selects for Tegra114 ARM: tegra: enable ARCH_REQUIRE_GPIOLIB for Tegra114 ARM: tegra: Fix build error w/ ARCH_TEGRA_114_SOC w/o ARCH_TEGRA_3x_SOC ARM: tegra: Fix build error for gic update ARM: tegra: remove empty tegra_smp_init_cpus() ARM: shmobile: Register ARM architected timer ARM: MARCO: fix the build issue due to gic-vic-to-irqchip move ARM: shmobile: r8a7779: Correct TMU clock support ARM: mxs_defconfig: Select CONFIG_DEVTMPFS_MOUNT ARM: mxs: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles ARM: mxs: use apbx bus clock to drive the timers on timrotv2 ...
2013-02-14dma: tegra20-apb-dma: remove unnecessary assignmentAndy Shevchenko1-1/+0
There is no need to assign 0 to residue, because dma_cookie_status() does this for us. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-05Merge tag 'tegra-for-3.9-soc-ccf' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc From Stephen Warren: ARM: tegra: Common Clock Framework rework Tegra already supports the common clock framework, but had issues: 1) The clock driver was located in arch/arm/mach-tegra/ rather than drivers/clk/. 2) A single "Tegra clock" type was implemented, rather than separate clock types for PLL, mux, divider, ... type in HW. 3) Clock lookups by device drivers were still driven by device name and connection ID, rather than through device tree. This pull request solves all three issues. This required some DT changes to add clocks properties, and driver changes to request clocks more "correctly". Finally, this rework allows all AUXDATA to be removed from Tegra board files, and various duplicate clock lookup entries to be removed from the driver. This pull request is based on the previous pull request, with tag tegra-for-3.9-cleanup. * tag 'tegra-for-3.9-soc-ccf' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (31 commits) clk: tegra30: remove unused TEGRA_CLK_DUPLICATE()s clk: tegra20: remove unused TEGRA_CLK_DUPLICATE()s ARM: tegra30: remove auxdata ARM: tegra20: remove auxdata ASoC: tegra: remove auxdata staging: nvec: remove use of clk_get_sys ARM: tegra: paz00: add clock information to DT ARM: tegra: add clock properties to Tegra30 DT ARM: tegra: add clock properties to Tegra20 DT spi: tegra: do not use clock name to get clock ARM: tegra: remove legacy clock code ARM: tegra: migrate to new clock code clk: tegra: add clock support for Tegra30 clk: tegra: add clock support for Tegra20 clk: tegra: add Tegra specific clocks ARM: tegra: define Tegra30 CAR binding ARM: tegra: define Tegra20 CAR binding ARM: tegra: move tegra_cpu_car.h to linux/clk/tegra.h ARM: tegra: add function to read chipid ARM: tegra: fix compile error when disable CPU_IDLE ... Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm/mach-tegra/board-dt-tegra20.c arch/arm/mach-tegra/board-dt-tegra30.c arch/arm/mach-tegra/common.c arch/arm/mach-tegra/platsmp.c drivers/clocksource/Makefile
2013-01-28ARM: tegra: migrate to new clock codePrashant Gaikwad1-1/+1
Migrate Tegra clock support to drivers/clk/tegra, this involves moving: 1. definition of tegra_cpu_car_ops to clk.c 2. definition of reset functions to clk-peripheral.c 3. change parent of cpu clock. 4. Remove legacy clock initialization. 5. Initialize clocks using DT. 6. Remove all instance of mach/clk.h Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: use to_clk_periph_gate().] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-25Merge 3.8-rc5 into driver-core-nextGreg Kroah-Hartman1-2/+6
This resolves a gpio driver merge issue pointed out in linux-next. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-25dma: Convert to devm_ioremap_resource()Thierry Reding1-6/+4
Convert all uses of devm_request_and_ioremap() to the newly introduced devm_ioremap_resource() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages so all explicit error messages can be removed from the failure code paths. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-24Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+6
Pull slave-dmaengine fixes from Vinod Koul: "A few fixes on slave dmanengine. There are trivial fixes in imx-dma, tegra-dma & ioat driver" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: tegra: implement flags parameters for cyclic transfer dmaengine: imx-dma: Disable use of hw_chain to fix sg_dma transfers. ioat: Fix DMA memory sync direction correct flag
2013-01-09dma: tegra: implement flags parameters for cyclic transferLaxman Dewangan1-2/+6
The flag parameter is added in the cyclic transfer request. Use the flag option of: - DMA_PREP_INTERRUPT for enabling interrupt. - DMA_CTRL_ACK for deciding whether ack is requred or not for descriptor. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> CC: <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-08dma: tegra: add support for Tegra114 SoCLaxman Dewangan1-1/+12
NVIDIA's Tegra114 has APB DMA controller which has 32 dma channels and support support channel wise pause control. Add support for Tegra114 which uses the channel wise pause control hardware feature. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-08dma: tegra: add support for channel wise pauseLaxman Dewangan1-5/+38
NVIDIA's some SoCs like Tegra114 support the channel wise pause control inplace of global pause which pauses all DMA channels. When SoCs support the channel wise pause control then it uses the global pause for clock gating for register access as well as all DMA channel pause. Hence DMA registers are not accessible if DMAs are globally paused on these new SoCs. Add support for channel wise pause feature if SoCs support it. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-03Drivers: dma: remove __dev* attributes.Greg Kroah-Hartman1-3/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Dan Williams <djbw@fb.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Barry Song <baohua.song@csr.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Jassi Brar <jassisinghbrar@gmail.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28dma: remove use of __devinitBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Li Yang <leoli@freescale.com> Cc: Zhang Wei <zw@zh-kernel.org> Cc: Barry Song <baohua.song@csr.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28dma: remove use of __devexit_pBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Barry Song <baohua.song@csr.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-10Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-7/+5
Pull slave-dmaengine updates from Vinod Koul: "This time we have Andy updates on dw_dmac which is attempting to make this IP block available as PCI and platform device though not fully complete this time. We also have TI EDMA moving the dma driver to use dmaengine APIs, also have a new driver for mmp-tdma, along with bunch of small updates. Now for your excitement the merge is little unusual here, while merging the auto merge on linux-next picks wrong choice for pl330 (drivers/dma/pl330.c) and this causes build failure. The correct resolution is in linux-next. (DMA: PL330: Fix build error) I didn't back merge your tree this time as you are better than me so no point in doing that for me :)" Fixed the pl330 conflict as in linux-next, along with trivial header file conflicts due to changed includes. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (29 commits) dma: tegra: fix interrupt name issue with apb dma. dw_dmac: fix a regression in dwc_prep_dma_memcpy dw_dmac: introduce software emulation of LLP transfers dw_dmac: autoconfigure data_width or get it via platform data dw_dmac: autoconfigure block_size or use platform data dw_dmac: get number of channels from hardware if possible dw_dmac: fill optional encoded parameters in register structure dw_dmac: mark dwc_dump_chan_regs as inline DMA: PL330: return ENOMEM instead of 0 from pl330_alloc_chan_resources DMA: PL330: Remove redundant runtime_suspend/resume functions DMA: PL330: Remove controller clock enable/disable dmaengine: use kmem_cache_zalloc instead of kmem_cache_alloc/memset DMA: PL330: Set the capability of pdm0 and pdm1 as DMA_PRIVATE ARM: EXYNOS: Set the capability of pdm0 and pdm1 as DMA_PRIVATE dma: tegra: use list_move_tail instead of list_del/list_add_tail mxs/dma: Enlarge the CCW descriptor area to 4 pages dw_dmac: utilize slave_id to pass request line dmaengine: mmp_tdma: add dt support dmaengine: mmp-pdma support spi: davici - make davinci select edma ...
2012-10-09Merge tag 'sound-3.7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This contains pretty many small commits covering fairly large range of files in sound/ directory. Partly because of additional API support and partly because of constantly developed ASoC and ARM stuff. Some highlights: - Introduced the helper function and documentation for exposing the channel map via control API, as discussed in Plumbers; most of PCI drivers are covered, will follow more drivers later - Most of drivers have been replaced with the new PM callbacks (if the bus is supported) - HD-audio controller got the support of runtime PM and the support of D3 clock-stop. Also changing the power_save option in sysfs kicks off immediately to enable / disable the power-save mode. - Another significant code change in HD-audio is the rewrite of firmware loading code. Other than that, most of changes in HD-audio are continued cleanups and standardization for the generic auto parser and bug fixes (HBR, device-specific fixups), in addition to the support of channel-map API. - Addition of ASoC bindings for the compressed API, used by the mid-x86 drivers. - Lots of cleanups and API refreshes for ASoC codec drivers and DaVinci. - Conversion of OMAP to dmaengine. - New machine driver for Wolfson Microelectronics Bells. - New CODEC driver for Wolfson Microelectronics WM0010. - Enhancements to the ux500 and wm2000 drivers - A new driver for DA9055 and the support for regulator bypass mode." Fix up various arm soc header file reorg conflicts. * tag 'sound-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (339 commits) ALSA: hda - Add new codec ALC283 ALC290 support ALSA: hda - avoid unneccesary indices on "Headphone Jack" controls ALSA: hda - fix indices on boost volume on Conexant ALSA: aloop - add locking to timer access ALSA: hda - Fix hang caused by race during suspend. sound: Remove unnecessary semicolon ALSA: hda/realtek - Fix detection of ALC271X codec ALSA: hda - Add inverted internal mic quirk for Lenovo IdeaPad U310 ALSA: hda - make Realtek/Sigmatel/Conexant use the generic unsol event ALSA: hda - make a generic unsol event handler ASoC: codecs: Add DA9055 codec driver ASoC: eukrea-tlv320: Convert it to platform driver ALSA: ASoC: add DT bindings for CS4271 ASoC: wm_hubs: Ensure volume updates are handled during class W startup ASoC: wm5110: Adding missing volume update bits ASoC: wm5110: Add OUT3R support ASoC: wm5110: Add AEC loopback support ASoC: wm5110: Rename EPOUT to HPOUT3 ASoC: arizona: Add more clock rates ASoC: arizona: Add more DSP options for mixer input muxes ...
2012-10-04dma: tegra: fix interrupt name issue with apb dma.Laxman Dewangan1-3/+3
When watching the interrupts through /proc/interrupts, the name of the interrupts are blank or garbage. The reason is the pointer passed for devname during irq registration is stack and so it get changed after dma registration completes. Allocate the pointer as part of dma channel and pass this pointer as the devname for irq registration to avoid change of name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reported-by: Stephen Warren <swarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-22dmaengine: Pass flags via device_prep_dma_cyclic() callbackPeter Ujfalusi1-1/+1
Change the parameter list of device_prep_dma_cyclic() so the DMA drivers can receive the flags coming from clients. This feature can be used during audio operation to disable all audio related interrupts when the DMA_PREP_INTERRUPT is cleared from the flags. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-09-14dma: tegra: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-4/+2
Using list_move_tail() instead of list_del() + list_add_tail(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-13Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into ↵Olof Johansson1-4/+4
next/fixes-non-critical From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>: this is the 2nd version of this series whose goal is to make struct of_device_id.data const. Conceptually a driver must not modify the data contained there so making it const is the right thing. v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are: - powerpc fixes - several new consts that were found by Arnd that are possible after patch 19. Arnd suggested to take this series via arm-soc late for 3.6 in one go because patch 19 depends on the former patches but is a precondition to the latter and it fixes a few warnings. So getting it in via the respective maintainer trees would need a much bigger coordination effort. That means I prefer getting Acks over you taking the patch. Vinod Koul already took dmaengine: at_hdmac: add a few const qualifiers that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your pull requests, but assuming you didn't let it already pull for 3.6 I suggest you drop it from your queue and I just take your Ack. This series was build tested for arm (all defconfigs) and powerpc (all defconfigs and an allyesconfig) and grep didn't find more issues. As before it introduces a warning in drivers/regulator/twl-regulator.c. This driver does modify its .of_match_table when a device is bound which doesn't fits the concept of independant devices. Arnd noticed another new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve, because the pointer to (now) const data is passed as first argument to scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to get a const, too. Alternatively I could introduce a cast removing the const, but I don't like that. * 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits) dma: tegra: make data used as *of_device_id.data const can: mpc5xxx_can: make data used as *of_device_id.data const macintosh/mediabay: make data used as *of_device_id.data const i2c/mpc: make data used as *of_device_id.data const mfd/da9052: make i2c_device_id array const powerpc/fsl_msi: drop unneeded cast to non-const pointer gpio/gpio-omap: make platformdata used as *of_device_id.data const of: add const to struct *of_device_id.data dma: tegra: make tegra_dma.chip_data a pointer to const data watchdog/mpc8xxx: add a const qualifier powerpc/celleb_pci: add a const qualifier powerpc/fsl_msi: add a const qualifier powerpc/83xx: add a const qualifier macintosh/mediabay: add a const qualifier mmc/omap_hsmmc: add a const qualifier i2c/mpc: add a const qualifier i2c/i2c-omap: add a const qualifier gpio/mpc8xxx: add a const qualifier gpio/gpio-omap.c: add a const qualifier misc/atmel_tc: make atmel_tc.tcb_config member point to const data Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: repulled a v3 version of the branch that rebased to add some more acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
2012-09-11dma: tegra: make data used as *of_device_id.data constLaxman Dewangan1-2/+2
Since of_device_id.data is declared as a pointer to const data a few more consts can be added in this driver. [ukl: split Laxman's patch to prevent warnings in the middle of the series. Original patch was sent with msgid 1346217447-19730-1-git-send-email-ldewangan@nvidia.com] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-09-11dma: tegra: make tegra_dma.chip_data a pointer to const dataLaxman Dewangan1-2/+2
This prepares *of_device_id.data becoming const. Without this change the following warning would occur: drivers/dma/tegra20-apb-dma.c: In function 'tegra_dma_probe': drivers/dma/tegra20-apb-dma.c:1210:9: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] [ukl: split Laxman's patch to prevent warnings in the middle of the series. Original patch was sent with msgid 1346217447-19730-1-git-send-email-ldewangan@nvidia.com] Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2012-08-13dma: tegra: enable/disable dma clockLaxman Dewangan1-1/+17
Enable the DMA clock when allocating channel and disable clock when freeing channels. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-31dma: tegra: enable/disable dma clockLaxman Dewangan1-1/+17
Enable the DMA clock when allocating channel and disable clock when freeing channels. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dma: tegra: rename driver and compatible to match with dtsLaxman Dewangan1-3/+3
Rename the compatible name and driver name to match with tegra dts file and as per clock driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-07-13dma: tegra: fix residual calculation for cyclic caseLaxman Dewangan1-6/+9
In cyclic mode of DMA, the byte transferred can be more than the requested size and in this case, calculating residuals based on the current position of DMA transfer to bytes requested i.e. bytes required to transfer to reach bytes requested from current DMA position. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-06-27dma: tegra: set DMA_CYCLIC capabilityLaxman Dewangan1-0/+2
Tegra's APB DMA driver support the cyclic mode of data transfer and hence setting the DMA_CYCLIC caps for dma channels. This is require when generic sound dmaengine pcm driver request for dma channel with CYCLIC capability. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 23:09:42 +0000