summaryrefslogtreecommitdiff
path: root/arch/parisc
AgeCommit message (Collapse)AuthorFilesLines
2017-01-28parisc: Don't use BITS_PER_LONG in userspace-exported swab.h headerHelge Deller3-5/+10
In swab.h the "#if BITS_PER_LONG > 32" breaks compiling userspace programs if BITS_PER_LONG is #defined by userspace with the sizeof() compiler builtin. Solve this problem by using __BITS_PER_LONG instead. Since we now #include asm/bitsperlong.h avoid further potential userspace pollution by moving the #define of SHIFT_PER_LONG to bitops.h which is not exported to userspace. This patch unbreaks compiling qemu on hppa/parisc. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org>
2017-01-02parisc: Add line-break when printing segfault infoHelge Deller1-1/+1
Add a leading line break else printed line gets too long. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.9
2016-12-29parisc: Drop TIF_RESTORE_SIGMASK and switch to generic codeHelge Deller1-1/+0
Commit 7e7814180b33 ("signal: consolidate {TS,TLF}_RESTORE_SIGMASK code") introduced code with which the "restore sigmask" flag lives in task_struct instead of ti->flags. Let's use this optimization on parisc too. Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-29parisc: Mark cr16 clocksource unstable on SMP systemsHelge Deller1-3/+20
The cr16 interval timer of each CPU is not syncronized to other cr16 timers in other CPUs in a SMP system. So, delay the registration of the cr16 clocksource until all CPUs have been detected and then - if we are on a SMP machine - mark the cr16 clocksource as unstable and lower it's rating before registering it at the clocksource framework. This patch fixes the stalled CPU warnings which we have seen since introduction of the cr16 clocksource. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.8+
2016-12-25clocksource: Use a plain u64 instead of cycle_tThomas Gleixner1-1/+1
There is no point in having an extra type for extra confusion. u64 is unambiguous. Conversion was done with the following coccinelle script: @rem@ @@ -typedef u64 cycle_t; @fix@ typedef cycle_t; @@ -cycle_t +u64 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds12-12/+12
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-21Merge branch 'parisc-4.10-1' of ↵Linus Torvalds12-139/+67
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: - add Kernel address space layout randomization support - re-enable interrupts earlier now that we have a working IRQ stack - optimize the timer interrupt function to better cope with missed timer irqs - fix error return code in parisc perf code (by Dan Carpenter) - fix PAT debug code * 'parisc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Optimize timer interrupt function parisc: perf: return -EFAULT on error parisc: Enhance CPU detection code on PAT machines parisc: Re-enable interrupts early parisc: Enable KASLR
2016-12-20parisc: Optimize timer interrupt functionHelge Deller3-92/+29
Restructure the timer interrupt function to better cope with missed timer irqs. Optimize the calculation when the next interrupt should happen and skip irqs if they would happen too shortly after exit of the irq function. The update_process_times() call is done anyway at every timer irq, so we can safely drop the prof_counter and prof_multiplier variables from the per_cpu structure. Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-14arch/parisc: add option to skip DMA sync as a part of map and unmapAlexander Duyck1-5/+15
This change allows us to pass DMA_ATTR_SKIP_CPU_SYNC which allows us to avoid invoking cache line invalidation if the driver will just handle it via a sync_for_cpu or sync_for_device call. Link: http://lkml.kernel.org/r/20161110113529.76501.44762.stgit@ahduyck-blue-test.jf.intel.com Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12parisc: perf: return -EFAULT on errorDan Carpenter1-3/+2
The copy_from_user() returns the number of bytes remaining to be copied but we want to return -EFAULT if it's non-zero. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-12parisc: Enhance CPU detection code on PAT machinesHelge Deller4-17/+19
This patch fixes the debug code which runs during the inventory scan on machines with PAT firmware. Additionally print out the relationship between the detected logical CPU number and it's physical location and physical cpu number. This leads to information which can be used to feed numa-structures in the kernel in later patches. An example output is from my single-CPU (2 cores) C8000 machine is: Logical CPU #0 is physical cpu #0 at 0xffff0000ffff15, hpa 0xfffffffffe780000 Logical CPU #1 is physical cpu #1 at 0xffff0000ffff15, hpa 0xfffffffffe781000 Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-12parisc: Re-enable interrupts earlyHelge Deller1-9/+3
Since kernel 3.9 we re-enable interrupts quite late due to commit c207a76bf15 ("parisc: only re-enable interrupts if we need to schedule or deliver signals when returning to userspace"). At that time the parisc kernel had no dedicated IRQ stack, and this commit prevented kernel stack overflows. But since commit 200c880420a ("parisc: implement irq stacks") we now have an IRQ stack, so we may be safe now. And when CONFIG_DEBUG_STACKOVERFLOW=y is enabled, we can even check at runtime for overflows. Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-12parisc: Enable KASLRHelge Deller4-18/+14
Add missing code for userspace executable address randomization, e.g. applications compiled with the gcc -pie option. Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-12Merge branch 'locking-core-for-linus' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The tree got pretty big in this development cycle, but the net effect is pretty good: 115 files changed, 673 insertions(+), 1522 deletions(-) The main changes were: - Rework and generalize the mutex code to remove per arch mutex primitives. (Peter Zijlstra) - Add vCPU preemption support: add an interface to query the preemption status of vCPUs and use it in locking primitives - this optimizes paravirt performance. (Pan Xinhui, Juergen Gross, Christian Borntraeger) - Introduce cpu_relax_yield() and remov cpu_relax_lowlatency() to clean up and improve the s390 lock yielding machinery and its core kernel impact. (Christian Borntraeger) - Micro-optimize mutexes some more. (Waiman Long) - Reluctantly add the to-be-deprecated mutex_trylock_recursive() interface on a temporary basis, to give the DRM code more time to get rid of its locking hacks. Any other users will be NAK-ed on sight. (We turned off the deprecation warning for the time being to not pollute the build log.) (Peter Zijlstra) - Improve the rtmutex code a bit, in light of recent long lived bugs/races. (Thomas Gleixner) - Misc fixes, cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/paravirt: Fix bool return type for PVOP_CALL() x86/paravirt: Fix native_patch() locking/ww_mutex: Use relaxed atomics locking/rtmutex: Explain locking rules for rt_mutex_proxy_unlock()/init_proxy_locked() locking/rtmutex: Get rid of RT_MUTEX_OWNER_MASKALL x86/paravirt: Optimize native pv_lock_ops.vcpu_is_preempted() locking/mutex: Break out of expensive busy-loop on {mutex,rwsem}_spin_on_owner() when owner vCPU is preempted locking/osq: Break out of spin-wait busy waiting loop for a preempted vCPU in osq_lock() Documentation/virtual/kvm: Support the vCPU preemption check x86/xen: Support the vCPU preemption check x86/kvm: Support the vCPU preemption check x86/kvm: Support the vCPU preemption check kvm: Introduce kvm_write_guest_offset_cached() locking/core, x86/paravirt: Implement vcpu_is_preempted(cpu) for KVM and Xen guests locking/spinlocks, s390: Implement vcpu_is_preempted(cpu) locking/core, powerpc: Implement vcpu_is_preempted(cpu) sched/core: Introduce the vcpu_is_preempted(cpu) interface sched/wake_q: Rename WAKE_Q to DEFINE_WAKE_Q locking/core: Provide common cpu_relax_yield() definition locking/mutex: Don't mark mutex_trylock_recursive() as deprecated, temporarily ...
2016-12-11Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar8-105/+67
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-25/+16
2016-12-08parisc: Fix TLB related boot crash on SMP machinesHelge Deller1-0/+11
At bootup we run measurements to calculate the best threshold for when we should be using full TLB flushes instead of just flushing a specific amount of TLB entries. This performance test is run over the kernel text segment. But running this TLB performance test on the kernel text segment turned out to crash some SMP machines when the kernel text pages were mapped as huge pages. To avoid those crashes this patch simply skips this test on some SMP machines and calculates an optimal threshold based on the maximum number of available TLB entries and number of online CPUs. On a technical side, this seems to happen: The TLB measurement code uses flush_tlb_kernel_range() to flush specific TLB entries with a page size of 4k (pdtlb 0(sr1,addr)). On UP systems this purge instruction seems to work without problems even if the pages were mapped as huge pages. But on SMP systems the TLB purge instruction is broadcasted to other CPUs. Those CPUs then crash the machine because the page size is not as expected. C8000 machines with PA8800/PA8900 CPUs were not affected by this problem, because the required cache coherency prohibits to use huge pages at all. Sadly I didn't found any documentation about this behaviour, so this finding is purely based on testing with phyiscal SMP machines (A500-44 and J5000, both were 2-way boxes). Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-07parisc: Remove unnecessary TLB purges from flush_dcache_page_asm and ↵John David Anglin1-21/+1
flush_icache_page_asm We have four routines in pacache.S that use temporary alias pages: copy_user_page_asm(), clear_user_page_asm(), flush_dcache_page_asm() and flush_icache_page_asm(). copy_user_page_asm() and clear_user_page_asm() don't purge the TLB entry used for the operation. flush_dcache_page_asm() and flush_icache_page_asm do purge the entry. Presumably, this was thought to optimize TLB use. However, the operation is quite heavy weight on PA 1.X processors as we need to take the TLB lock and a TLB broadcast is sent to all processors. This patch removes the purges from flush_dcache_page_asm() and flush_icache_page_asm. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-12-07parisc: Purge TLB before setting PTEJohn David Anglin1-4/+4
The attached change interchanges the order of purging the TLB and setting the corresponding page table entry. TLB purges are strongly ordered. It occurred to me one night that setting the PTE first might have subtle ordering issues on SMP machines and cause random memory corruption. A TLB lock guards the insertion of user TLB entries. So after the TLB is purged, a new entry can't be inserted until the lock is released. This ensures that the new PTE value is used when the lock is released. Since making this change, no random segmentation faults have been observed on the Debian hppa buildd servers. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-30tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPINGFrancis Yan1-0/+2
This patch exports the sender chronograph stats via the socket SO_TIMESTAMPING channel. Currently we can instrument how long a particular application unit of data was queued in TCP by tracking SOF_TIMESTAMPING_TX_SOFTWARE and SOF_TIMESTAMPING_TX_SCHED. Having these sender chronograph stats exported simultaneously along with these timestamps allow further breaking down the various sender limitation. For example, a video server can tell if a particular chunk of video on a connection takes a long time to deliver because TCP was experiencing small receive window. It is not possible to tell before this patch without packet traces. To prepare these stats, the user needs to set SOF_TIMESTAMPING_OPT_STATS and SOF_TIMESTAMPING_OPT_TSONLY flags while requesting other SOF_TIMESTAMPING TX timestamps. When the timestamps are available in the error queue, the stats are returned in a separate control message of type SCM_TIMESTAMPING_OPT_STATS, in a list of TLVs (struct nlattr) of types: TCP_NLA_BUSY_TIME, TCP_NLA_RWND_LIMITED, TCP_NLA_SNDBUF_LIMITED. Unit is microsecond. Signed-off-by: Francis Yan <francisyyan@gmail.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25parisc: Also flush data TLB in flush_icache_page_asmJohn David Anglin1-15/+22
This is the second issue I noticed in reviewing the parisc TLB code. The fic instruction may use either the instruction or data TLB in flushing the instruction cache. Thus, on machines with a split TLB, we should also flush the data TLB after setting up the temporary alias registers. Although this has no functional impact, I changed the pdtlb and pitlb instructions to consistently use the index register %r0. These instructions do not support integer displacements. Tested on rp3440 and c8000. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-25parisc: Fix race in pci-dma.cJohn David Anglin1-1/+1
We are still troubled by occasional random segmentation faults and memory memory corruption on SMP machines. The causes quite a few package builds to fail on the Debian buildd machines for parisc. When gcc-6 failed to build three times in a row, I looked again at the TLB related code. I found a couple of issues. This is the first. In general, we need to ensure page table updates and corresponding TLB purges are atomic. The attached patch fixes an instance in pci-dma.c where the page table update was not guarded by the TLB lock. Tested on rp3440 and c8000. So far, no further random segmentation faults have been observed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-25parisc: Switch to generic sched_clock implementationHelge Deller2-47/+14
Drop the open-coded sched_clock() function and replace it by the provided GENERIC_SCHED_CLOCK implementation. We have seen quite some hung tasks in the past, which seem to be fixed by this patch. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-25parisc: Fix races in parisc_setup_cache_timing()John David Anglin2-19/+16
Helge reported to me the following startup crash: [ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13) [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 9000/785/J5000 [ 0.000000] Total Memory: 2048 MB [ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) [ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB) [ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB) [ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB) [ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB) [ 0.768910] Brought up 1 CPUs [ 0.992465] NET: Registered protocol family 16 [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 [ 3.000419] _______________________________ [ 3.000419] < Your System ate a SPARC! Gah! > [ 3.000419] ------------------------------- [ 3.000419] \ ^__^ [ 3.000419] (__)\ )\/\ [ 3.000419] U ||----w | [ 3.000419] || || [ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 9.448082] task: 00000000bfd48060 task.stack: 00000000bfd50000 [ 9.528040] [ 10.760029] IASQ: 0000000000000000 0000000000000000 IAOQ: 000000004025d154 000000004025d158 [ 10.868052] IIR: 43ffff80 ISR: 0000000000340000 IOR: 000001ff54150960 [ 10.960029] CPU: 1 CR30: 00000000bfd50000 CR31: 0000000011111111 [ 11.052057] ORIG_R28: 000000004021e3b4 [ 11.100045] IAOQ[0]: irq_exit+0x94/0x120 [ 11.152062] IAOQ[1]: irq_exit+0x98/0x120 [ 11.208031] RP(r2): irq_exit+0xb8/0x120 [ 11.256074] Backtrace: [ 11.288067] [<00000000402cd944>] cpu_startup_entry+0x1e4/0x598 [ 11.368058] [<0000000040109528>] smp_callin+0x2c0/0x2f0 [ 11.436308] [<00000000402b53fc>] update_curr+0x18c/0x2d0 [ 11.508055] [<00000000402b73b8>] dequeue_entity+0x2c0/0x1030 [ 11.584040] [<00000000402b3cc0>] set_next_entity+0x80/0xd30 [ 11.660069] [<00000000402c1594>] pick_next_task_fair+0x614/0x720 [ 11.740085] [<000000004020dd34>] __schedule+0x394/0xa60 [ 11.808054] [<000000004020e488>] schedule+0x88/0x118 [ 11.876039] [<0000000040283d3c>] rescuer_thread+0x4d4/0x5b0 [ 11.948090] [<000000004028fc4c>] kthread+0x1ec/0x248 [ 12.016053] [<0000000040205020>] end_fault_vector+0x20/0xc0 [ 12.092239] [<00000000402050c0>] _switch_to_ret+0x0/0xf40 [ 12.164044] [ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 12.244040] Backtrace: [ 12.244040] [<000000004021c480>] show_stack+0x68/0x80 [ 12.244040] [<00000000406f332c>] dump_stack+0xec/0x168 [ 12.244040] [<000000004021c74c>] die_if_kernel+0x25c/0x430 [ 12.244040] [<000000004022d320>] handle_unaligned+0xb48/0xb50 [ 12.244040] [ 12.632066] ---[ end trace 9ca05a7215c7bbb2 ]--- [ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task! We have the insn 0x43ffff80 in IIR but from IAOQ we should have: 4025d150: 0f f3 20 df ldd,s r19(r31),r31 4025d154: 0f 9f 00 9c ldw r31(ret0),ret0 4025d158: bf 80 20 58 cmpb,*<> r0,ret0,4025d18c <irq_exit+0xcc> Cpu0 has just completed running parisc_setup_cache_timing: [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 From the backtrace, cpu1 is in smp_callin: void __init smp_callin(void) { int slave_id = cpu_now_booting; smp_cpu_init(slave_id); preempt_disable(); flush_cache_all_local(); /* start with known state */ flush_tlb_all_local(NULL); local_irq_enable(); /* Interrupts have been off until now */ cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); So, it has just flushed its caches and the TLB. It would seem either the flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel memory. The attached patch reworks parisc_setup_cache_timing to remove the races in setting the cache and TLB flush thresholds. It also corrects the number of bytes flushed in the TLB calculation. The patch flushes the cache and TLB on cpu0 before starting the secondary processors so that they are started from a known state. Tested with a few reboots on c8000. Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-22parisc: Fix printk continuations in system detectionHelge Deller1-4/+4
Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-17locking/core: Provide common cpu_relax_yield() definitionChristian Borntraeger1-1/+0
No need to duplicate the same define everywhere. Since the only user is stop-machine and the only provider is s390, we can use a default implementation of cpu_relax_yield() in sched.h. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-s390 <linux-s390@vger.kernel.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: sparclinux@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1479298985-191589-1-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16locking/core, arch: Remove cpu_relax_lowlatency()Christian Borntraeger1-1/+0
As there are no users left, we can remove cpu_relax_lowlatency() implementations from every architecture. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Cc: <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/1477386195-32736-6-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-16locking/core: Introduce cpu_relax_yield()Christian Borntraeger1-0/+1
For spinning loops people do often use barrier() or cpu_relax(). For most architectures cpu_relax and barrier are the same, but on some architectures cpu_relax can add some latency. For example on power,sparc64 and arc, cpu_relax can shift the CPU towards other hardware threads in an SMT environment. On s390 cpu_relax does even more, it uses an hypercall to the hypervisor to give up the timeslice. In contrast to the SMT yielding this can result in larger latencies. In some places this latency is unwanted, so another variant "cpu_relax_lowlatency" was introduced. Before this is used in more and more places, lets revert the logic and provide a cpu_relax_yield that can be called in places where yielding is more important than latency. By default this is the same as cpu_relax on all architectures. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Noam Camus <noamc@ezchip.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1477386195-32736-2-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-11Merge branch 'linus' into locking/core, to pick up fixesIngo Molnar3-36/+40
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-02parisc: Ignore the pkey system calls for nowHelge Deller1-1/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-02parisc: Use LINUX_GATEWAY_ADDR define instead of hardcoded valueHelge Deller1-1/+1
LINUX_GATEWAY_ADDR is defined in unistd.h. Let's use it. Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-02parisc: Ensure consistent state when switching to kernel stack at syscall entryJohn David Anglin1-2/+9
We have one critical section in the syscall entry path in which we switch from the userspace stack to kernel stack. In the event of an external interrupt, the interrupt code distinguishes between those two states by analyzing the value of sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that the value of sr7 is in sync with the currently enabled stack. This patch now disables interrupts while executing the critical section. This prevents the interrupt handler to possibly see an inconsistent state which in the worst case can lead to crashes. Interestingly, in the syscall exit path interrupts were already disabled in the critical section which switches back to the userspace stack. Cc: <stable@vger.kernel.org> Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-02parisc: Avoid trashing sr2 and sr3 in LWS codeJohn David Anglin1-29/+24
There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS). sr2 already points to kernel space (it's zero in userspace, otherwise syscalls wouldn't work), and since the LWS code is executed in userspace, we can simply ignore to preload sr3. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
2016-11-02parisc: use KERN_CONT when printing device inventoryHelge Deller1-3/+3
Recent changes to printk require KERN_CONT uses to continue logging messages. So add KERN_CONT to output of device inventory. Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-25locking/mutex: Kill arch specific codePeter Zijlstra1-1/+0
Its all generic atomic_long_t stuff now. Tested-by: Jason Low <jason.low2@hpe.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-11Merge branch 'parisc-4.9-2' of ↵Linus Torvalds6-17/+29
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Some final updates and fixes for this merge window for the parisc architecture. Changes include: - Fix boot problems with new memblock allocator on rp3410 machine - Increase initial kernel mapping size for 32- and 64-bit kernels, this allows to boot bigger kernels which have many modules built-in - Fix kernel layout regarding __gp and move exception table into RO section - Show trap names in crashes, use extable.h header instead of module.h" * 'parisc-4.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Show trap name in kernel crash parisc: Zero-initialize newly alloced memblock parisc: Move exception table into read-only section parisc: Fix kernel memory layout regarding position of __gp parisc: Increase initial kernel mapping size parisc: Migrate exception table users off module.h and onto extable.h
2016-10-11parisc: Show trap name in kernel crashHelge Deller3-8/+14
Show the real trap name when the kernel crashes. Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-11parisc: Zero-initialize newly alloced memblockHelge Deller1-0/+2
Commit 4fe9e1d957e4 ("parisc: Drop bootmem and switch to memblock") switched to the memblock allocator, but missed to zero-initialize the newly allocated memblocks. This lead to crashes on some machines like the rp3410. Fixes: 4fe9e1d957e4 ("parisc: Drop bootmem and switch to memblock") Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-10Merge branch 'work.misc' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted misc bits and pieces. There are several single-topic branches left after this (rename2 series from Miklos, current_time series from Deepa Dinamani, xattr series from Andreas, uaccess stuff from from me) and I'd prefer to send those separately" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits) proc: switch auxv to use of __mem_open() hpfs: support FIEMAP cifs: get rid of unused arguments of CIFSSMBWrite() posix_acl: uapi header split posix_acl: xattr representation cleanups fs/aio.c: eliminate redundant loads in put_aio_ring_file fs/internal.h: add const to ns_dentry_operations declaration compat: remove compat_printk() fs/buffer.c: make __getblk_slow() static proc: unsigned file descriptors fs/file: more unsigned file descriptors fs: compat: remove redundant check of nr_segs cachefiles: Fix attempt to read i_blocks after deleting file [ver #2] cifs: don't use memcpy() to copy struct iov_iter get rid of separate multipage fault-in primitives fs: Avoid premature clearing of capabilities fs: Give dentry to inode_change_ok() instead of inode fuse: Propagate dentry down to inode_change_ok() ceph: Propagate dentry down to inode_change_ok() xfs: Propagate dentry down to inode_change_ok() ...
2016-10-10Merge branch 'mm-pkeys-for-linus' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull protection keys syscall interface from Thomas Gleixner: "This is the final step of Protection Keys support which adds the syscalls so user space can actually allocate keys and protect memory areas with them. Details and usage examples can be found in the documentation. The mm side of this has been acked by Mel" * 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pkeys: Update documentation x86/mm/pkeys: Do not skip PKRU register if debug registers are not used x86/pkeys: Fix pkeys build breakage for some non-x86 arches x86/pkeys: Add self-tests x86/pkeys: Allow configuration of init_pkru x86/pkeys: Default to a restrictive init PKRU pkeys: Add details of system call use to Documentation/ generic syscalls: Wire up memory protection keys syscalls x86: Wire up protection keys system calls x86/pkeys: Allocation/free syscalls x86/pkeys: Make mprotect_key() mask off additional vm_flags mm: Implement new pkey_mprotect() system call x86/pkeys: Add fault handling for PF_PK page fault bit
2016-10-09parisc: Move exception table into read-only sectionHelge Deller1-3/+4
Since BUILDTIME_EXTABLE_SORT is enabled, the exception table can move into the read-only section. Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-09parisc: Fix kernel memory layout regarding position of __gpHelge Deller1-2/+5
Architecturally we need to keep __gp below 0x1000000. But because of ftrace and tracepoint support, the RO_DATA_SECTION now gets much bigger than it was before. By moving the linkage tables before RO_DATA_SECTION we can avoid that __gp gets positioned at a too high address. Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-09parisc: Increase initial kernel mapping sizeHelge Deller1-3/+3
Increase the initial kernel default page mapping size for 64-bit kernels to 64 MB and for 32-bit kernels to 32 MB. Due to the additional support of ftrace, tracepoint and huge pages the kernel size can exceed the sizes we used up to now. Cc: stable@vger.kernel.org # 4.4+ Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-08Merge branch 'work.const-qstr' into work.miscAl Viro1-1/+1
2016-10-08parisc: Migrate exception table users off module.h and onto extable.hPaul Gortmaker1-1/+1
This file was only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile this file. Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-parisc@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Helge Deller <deller@gmx.de>
2016-10-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-1/+1
Merge updates from Andrew Morton: - fsnotify updates - ocfs2 updates - all of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits) console: don't prefer first registered if DT specifies stdout-path cred: simpler, 1D supplementary groups CREDITS: update Pavel's information, add GPG key, remove snail mail address mailmap: add Johan Hovold .gitattributes: set git diff driver for C source code files uprobes: remove function declarations from arch/{mips,s390} spelling.txt: "modeled" is spelt correctly nmi_backtrace: generate one-line reports for idle cpus arch/tile: adopt the new nmi_backtrace framework nmi_backtrace: do a local dump_stack() instead of a self-NMI nmi_backtrace: add more trigger_*_cpu_backtrace() methods min/max: remove sparse warnings when they're nested Documentation/filesystems/proc.txt: add more description for maps/smaps mm, proc: fix region lost in /proc/self/smaps proc: fix timerslack_ns CAP_SYS_NICE check when adjusting self proc: add LSM hook checks to /proc/<tid>/timerslack_ns proc: relax /proc/<tid>/timerslack_ns capability requirements meminfo: break apart a very long seq_printf with #ifdefs seq/proc: modify seq_put_decimal_[u]ll to take a const char *, not char proc: faster /proc/*/status ...
2016-10-07Merge branch 'parisc-4.9-1' of ↵Linus Torvalds19-186/+304
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "Changes include: - Fix boot of 32bit SMP kernel (initial kernel mapping was too small) - Added hardened usercopy checks - Drop bootmem and switch to memblock and NO_BOOTMEM implementation - Drop the BROKEN_RODATA config option (and thus remove the relevant code from the generic headers and files because parisc was the last architecture which used this config option) - Improve segfault reporting by printing human readable error strings - Various smaller changes, e.g. dwarf debug support for assembly code, update comments regarding copy_user_page_asm, switch to kmalloc_array()" * 'parisc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Increase KERNEL_INITIAL_SIZE for 32-bit SMP kernels parisc: Drop bootmem and switch to memblock parisc: Add hardened usercopy feature parisc: Add cfi_startproc and cfi_endproc to assembly code parisc: Move hpmc stack into page aligned bss section parisc: Fix self-detected CPU stall warnings on Mako machines parisc: Report trap type as human readable string parisc: Update comment regarding implementation of copy_user_page_asm parisc: Use kmalloc_array() in add_system_map_addresses() parisc: Check return value of smp_boot_one_cpu() parisc: Drop BROKEN_RODATA config option
2016-10-07nmi_backtrace: generate one-line reports for idle cpusChris Metcalf1-0/+1
When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm] Tested-by: Petr Mladek <pmladek@suse.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVEVineet Gupta1-1/+0
This came to light when implementing native 64-bit atomics for ARCv2. The atomic64 self-test code uses CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE to check whether atomic64_dec_if_positive() is available. It seems it was needed when not every arch defined it. However as of current code the Kconfig option seems needless - for CONFIG_GENERIC_ATOMIC64 it is auto-enabled in lib/Kconfig and a generic definition of API is present lib/atomic64.c - arches with native 64-bit atomics select it in arch/*/Kconfig and define the API in their headers So I see no point in keeping the Kconfig option Compile tested for: - blackfin (CONFIG_GENERIC_ATOMIC64) - x86 (!CONFIG_GENERIC_ATOMIC64) - ia64 Link: http://lkml.kernel.org/r/1473703083-8625-3-git-send-email-vgupta@synopsys.com Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Zhaoxiu Zeng <zhaoxiu.zeng@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ming Lin <ming.l@ssi.samsung.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07parisc: Increase KERNEL_INITIAL_SIZE for 32-bit SMP kernelsHelge Deller2-1/+9
Increase the initial kernel default page mapping size for SMP kernels to 32MB and add a runtime check which panics early if the kernel is bigger than the initial mapping size. This fixes boot crashes of 32bit SMP kernels. Due to the introduction of huge page support in kernel 4.4 and it's required initial kernel layout in memory, a 32bit SMP kernel usually got bigger (in layout, not size) than 16MB. Cc: stable@vger.kernel.org #4.4+ Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 04:35:27 +0000