summaryrefslogtreecommitdiff
path: root/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2020-03-22Linux 5.6-rc7Linus Torvalds1-1/+1
2020-03-19Merge tag 'kbuild-fixes-v5.6-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix __uint128_t capability test in Kconfig when GCC that defaults to 32-bit is used to build the 64-bit kernel - suppress new noisy Clang warnings -Wpointer-to-enum-cast - move the namespace field in Module.symvers for the backward compatibility reason for the depmod tool - use available compression for initramdisk when INTRAMFS_SOURCE is defined, which was the original behavior - fix modpost to handle correct large section numbers when it refers to modversion CRCs and module namespaces - fix comments and documents * tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts/kallsyms: fix wrong kallsyms_relative_base modpost: Get proper section index by get_secindex() instead of st_shndx initramfs: restore default compression behavior modpost: move the namespace field in Module.symvers last kbuild: Disable -Wpointer-to-enum-cast kbuild: doc: fix references to other documents int128: fix __uint128_t compiler test in Kconfig kconfig: introduce m32-flag and m64-flag kbuild: Fix inconsistent comment
2020-03-15Linux 5.6-rc6Linus Torvalds1-1/+1
2020-03-12kbuild: Fix inconsistent commentSZ Lin (林上智)1-1/+1
The commit 2042b5486bd3 ("kbuild: unset variables in top Makefile instead of setting 0") renamed the variable from "config-targets" to "config-build", the comment should be consistent accordingly. Signed-off-by: Kaiden PK Yu (余泊鎧) <KaidenPK.Yu@moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin@moxa.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-08Linux 5.6-rc5Linus Torvalds1-1/+1
2020-03-01Linux 5.6-rc4Linus Torvalds1-1/+1
2020-02-27kbuild: add dt_binding_check to PHONY in a correct placeMasahiro Yamada1-1/+2
The dt_binding_check is added to PHONY, but it is invisible when $(dtstree) is empty. So, it is not specified as phony for ARCH=x86 etc. Add it to PHONY outside the ifneq ... endif block. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-27kbuild: add dtbs_check to PHONYMasahiro Yamada1-1/+1
The dtbs_check should be a phony target, but currently it is not specified so. 'make dtbs_check' works even if a file named 'dtbs_check' exists because it depends on another phony target, scripts_dtc, but we should not rely on it. Add dtbs_check to PHONY. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
2020-02-27kbuild: add comment for V=2 modeRandy Dunlap1-0/+1
Complete the comments for valid values of KBUILD_VERBOSE, specifically for KBUILD_VERBOSE=2. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-23Linux 5.6-rc3Linus Torvalds1-1/+1
2020-02-16Linux 5.6-rc2Linus Torvalds1-1/+1
2020-02-09Linux 5.6-rc1Linus Torvalds1-2/+2
2020-02-06kbuild: make multiple directory targets workMasahiro Yamada1-1/+1
Currently, the single-target build does not work when two or more sub-directories are given: $ make fs/ kernel/ lib/ CALL scripts/checksyscalls.sh CALL scripts/atomic/check-atomics.sh DESCEND objtool make[2]: Nothing to be done for 'kernel/'. make[2]: Nothing to be done for 'fs/'. make[2]: Nothing to be done for 'lib/'. Make it work properly. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-01Merge tag 'kbuild-v5.6' of ↵Linus Torvalds1-18/+6
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - detect missing include guard in UAPI headers - do not create orphan built-in.a or obj-y objects - generate modules.builtin more simply, and drop tristate.conf - simplify built-in initramfs creation - make linux-headers deb package thinner - optimize the deb package build script - misc cleanups * tag 'kbuild-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) builddeb: split libc headers deployment out into a function builddeb: split kernel headers deployment out into a function builddeb: remove redundant make for ARCH=um builddeb: avoid invoking sub-shells where possible builddeb: remove redundant $objtree/ builddeb: match temporary directory name to the package name builddeb: remove unneeded files in hdrobjfiles for headers package kbuild: use -S instead of -E for precise cc-option test in Kconfig builddeb: allow selection of .deb compressor kbuild: remove 'Building modules, stage 2.' log kbuild: remove *.tmp file when filechk fails kbuild: remove PYTHON2 variable modpost: assume STT_SPARC_REGISTER is defined gen_initramfs.sh: remove intermediate cpio_list on errors initramfs: refactor the initramfs build rules gen_initramfs.sh: always output cpio even without -o option initramfs: add default_cpio_list, and delete -d option support initramfs: generate dependency list and cpio at the same time initramfs: specify $(src)/gen_initramfs.sh as a prerequisite in Makefile initramfs: make initramfs compression choice non-optional ...
2020-01-26Linux 5.5Linus Torvalds1-1/+1
2020-01-19Linux 5.5-rc7Linus Torvalds1-1/+1
2020-01-16kbuild: remove PYTHON2 variableMasahiro Yamada1-2/+1
Python 2 has retired. There is no user of this variable. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-12Linux 5.5-rc6Linus Torvalds1-1/+1
2020-01-07kbuild: create modules.builtin without Makefile.modbuiltin or tristate.confMasahiro Yamada1-16/+5
Commit bc081dd6e9f6 ("kbuild: generate modules.builtin") added infrastructure to generate modules.builtin, the list of all builtin modules. Basically, it works like this: - Kconfig generates include/config/tristate.conf, the list of tristate CONFIG options with a value in a capital letter. - scripts/Makefile.modbuiltin makes Kbuild descend into directories to collect the information of builtin modules. I am not a big fan of it because Kbuild ends up with traversing the source tree twice. I am not sure how perfectly it should work, but this approach cannot avoid false positives; even if the relevant CONFIG option is tristate, some Makefiles forces obj-m to obj-y. Some examples are: arch/powerpc/platforms/powermac/Makefile: obj-$(CONFIG_NVRAM:m=y) += nvram.o net/ipv6/Makefile: obj-$(subst m,y,$(CONFIG_IPV6)) += inet6_hashtables.o net/netlabel/Makefile: obj-$(subst m,y,$(CONFIG_IPV6)) += netlabel_calipso.o Nobody has complained about (or noticed) it, so it is probably fine to have false positives in modules.builtin. This commit simplifies the implementation. Let's exploit the fact that every module has MODULE_LICENSE(). (modpost shows a warning if MODULE_LICENSE is missing. If so, 0-day bot would already have blocked such a module.) I added MODULE_FILE to <linux/module.h>. When the code is being compiled as builtin, it will be filled with the file path of the module, and collected into modules.builtin.info. Then, scripts/link-vmlinux.sh extracts the list of builtin modules out of it. This new approach fixes the false-positives above, but adds another type of false-positives; non-modular code may have MODULE_LICENSE() by mistake. This is not a big deal, it is just the code is always orphan. We can clean it up if we like. You can see cleanup examples by: $ git log --grep='make.* explicitly non-modular' To sum up, this commits deletes lots of code, but still produces almost equivalent results. Please note it does not increase the vmlinux size at all. As you can see in include/asm-generic/vmlinux.lds.h, the .modinfo section is discarded in the link stage. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-05Linux 5.5-rc5Linus Torvalds1-1/+1
2019-12-29Linux 5.5-rc4Linus Torvalds1-1/+1
2019-12-22Linux 5.5-rc3Linus Torvalds1-1/+1
2019-12-21Merge tag 'kbuild-fixes-v5.5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - fix warning in out-of-tree 'make clean' - add READELF variable to the top Makefile - fix broken builds when LINUX_COMPILE_BY contains a backslash - fix build warning in kallsyms - fix NULL pointer access in expr_eq() in Kconfig - fix missing dependency on rsync in deb-pkg build - remove ---help--- from documentation - fix misleading documentation about directory descending * tag 'kbuild-fixes-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: clarify the difference between obj-y and obj-m w.r.t. descending kconfig: remove ---help--- from documentation scripts: package: mkdebian: add missing rsync dependency kconfig: don't crash on NULL expressions in expr_eq() scripts/kallsyms: fix offset overflow of kallsyms_relative_base mkcompile_h: use printf for LINUX_COMPILE_BY mkcompile_h: git rid of UTS_TRUNCATE from LINUX_COMPILE_{BY,HOST} x86/boot: kbuild: allow readelf executable to be specified kbuild: fix 'No such file or directory' warning when cleaning
2019-12-15Linux 5.5-rc2Linus Torvalds1-1/+1
2019-12-14x86/boot: kbuild: allow readelf executable to be specifiedDmitry Golovin1-1/+2
Introduce a new READELF variable to top-level Makefile, so the name of readelf binary can be specified. Before this change the name of the binary was hardcoded to "$(CROSS_COMPILE)readelf" which might not be present for every toolchain. This allows to build with LLVM Object Reader by using make parameter READELF=llvm-readelf. Link: https://github.com/ClangBuiltLinux/linux/issues/771 Signed-off-by: Dmitry Golovin <dima@golovin.in> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-12-08Linux 5.5-rc1Linus Torvalds1-2/+2
2019-12-02Merge tag 'kbuild-v5.5' of ↵Linus Torvalds1-62/+59
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-11-24Linux 5.4Linus Torvalds1-1/+1
2019-11-23kbuild: make single target builds even fasterMasahiro Yamada1-43/+47
Commit 2dffd23f81a3 ("kbuild: make single target builds much faster") made the situation much better. To improve it even more, apply the similar idea to the top Makefile. Trim unrelated directories from build-dirs. The single build code must be moved above the 'descend' target. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jens Axboe <axboe@kernel.dk>
2019-11-17Linux 5.4-rc8Linus Torvalds1-1/+1
2019-11-15kbuild: move headers_check rule to usr/include/MakefileMasahiro Yamada1-8/+3
Currently, some sanity checks for uapi headers are done by scripts/headers_check.pl, which is wired up to the 'headers_check' target in the top Makefile. It is true compiling headers has better test coverage, but there are still several headers excluded from the compile test. I like to keep headers_check.pl for a while, but we can delete a lot of code by moving the build rule to usr/include/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-15kbuild: remove header compile testMasahiro Yamada1-1/+0
There are both positive and negative options about this feature. At first, I thought it was a good idea, but actually Linus stated a negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it is ugly and annoying. The baseline I'd like to keep is the compile-test of uapi headers. (Otherwise, kernel developers have no way to ensure the correctness of the exported headers.) I will maintain a small build rule in usr/include/Makefile. Remove the other header test functionality. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-15kbuild: tell sparse about the $ARCHLuc Van Oostenryck1-0/+3
Sparse uses the same executable for all archs and uses flags like -m64, -mbig-endian or -D__arm__ for arch-specific parameters. But Sparse also uses value from the host machine used to build Sparse as default value for the target machine. This works, of course, well for native build but can create problems when cross-compiling, like defining both '__i386__' and '__arm__' when cross-compiling for arm on a x86-64 machine. Fix this by explicitely telling sparse the target architecture. Reported-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11scripts/nsdeps: support nsdeps for external module buildsMasahiro Yamada1-1/+2
scripts/nsdeps is written to take care of only in-tree modules. Perhaps, this is not a bug, but just a design. At least, Documentation/core-api/symbol-namespaces.rst focuses on in-tree modules. Having said that, some people already tried nsdeps for external modules. So, it would be nice to support it. Reported-by: Steve French <smfrench@gmail.com> Reported-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com>
2019-11-11modpost: dump missing namespaces into a single modules.nsdeps fileMasahiro Yamada1-2/+2
The modpost, with the -d option given, generates per-module .ns_deps files. Kbuild generates per-module .mod files to carry module information. This is convenient because Make handles multiple jobs in parallel when the -j option is given. On the other hand, the modpost always runs as a single thread. I do not see a strong reason to produce separate .ns_deps files. This commit changes the modpost to generate just one file, modules.nsdeps, each line of which has the following format: <module_name>: <list of missing namespaces> Please note it contains *missing* namespaces instead of required ones. So, modules.nsdeps is empty if the namespace dependency is all good. This will work more efficiently because spatch will no longer process already imported namespaces. I removed the '(if needed)' from the nsdeps log since spatch is invoked only when needed. This also solves the stale .ns_deps problem reported by Jessica Yu: https://lkml.org/lkml/2019/10/28/467 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Matthias Maennich <maennich@google.com> Tested-by: Matthias Maennich <maennich@google.com>
2019-11-11modpost: do not invoke extra modpost for nsdepsMasahiro Yamada1-3/+2
'make nsdeps' invokes the modpost three times at most; before linking vmlinux, before building modules, and finally for generating .ns_deps files. Running the modpost again and again is not efficient. The last two can be unified. When the -d option is given, the modpost still does the usual job, and in addition, generates .ns_deps files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Matthias Maennich <maennich@google.com> Reviewed-by: Matthias Maennich <maennich@google.com>
2019-11-11kbuild: Extend defconfig field size from 24 to 27Geert Uytterhoeven1-1/+1
There are 6 defconfigs with names longer than 24 characters, breaking alignment in "make help". The "winner" is "ecovec24-romimage_defconfig", counting in at 27 characters. Extend the defconfig field size to 27 to restore alignment. Don't use a larger value, to not encourage people to create even longer defconfig names. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11kbuild: Wrap long "make help" text linesGeert Uytterhoeven1-1/+2
Some "make help" text lines extend beyond 80 characters. Wrap them before an opening parenthesis, or before 80 characters. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-11kbuild: remove unneeded variable, single-allMasahiro Yamada1-4/+2
When single-build is set, everything in $(MAKECMDGOALS) is a single target. You can use $(MAKECMDGOALS) to list out the single targets. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-11-10Linux 5.4-rc7Linus Torvalds1-1/+1
2019-11-03Linux 5.4-rc6Linus Torvalds1-1/+1
2019-10-27Linux 5.4-rc5Linus Torvalds1-2/+2
2019-10-20Linux 5.4-rc4Linus Torvalds1-1/+1
2019-10-15kbuild: update comment about KBUILD_ALLDIRSMasahiro Yamada1-1/+1
Commit 000ec95fbe75 ("kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package") missed to update this comment. Fixes: 000ec95fbe75 ("kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-10-13Linux 5.4-rc3Linus Torvalds1-1/+1
2019-10-11Merge tag 'modules-for-v5.4-rc3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull module fixes from Jessica Yu: "Code cleanups and kbuild/namespace related fixups from Masahiro. Most importantly, it fixes a namespace-related modpost issue for external module builds - Fix broken external module builds due to a modpost bug in read_dump(), where the namespace was not being strdup'd and sym->namespace would be set to bogus data. - Various namespace-related kbuild fixes and cleanups thanks to Masahiro Yamada" * tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: doc: move namespaces.rst from kbuild/ to core-api/ nsdeps: make generated patches independent of locale nsdeps: fix hashbang of scripts/nsdeps kbuild: fix build error of 'make nsdeps' in clean tree module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict modpost: fix broken sym->namespace for external module builds module: swap the order of symbol.namespace scripts: add_namespace: Fix coccicheck failed
2019-10-08Merge tag 'linux-kselftest-5.4-rc3' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Fixes for existing tests and the framework. Cristian Marussi's patches add the ability to skip targets (tests) and exclude tests that didn't build from run-list. These patches improve the Kselftest results. Ability to skip targets helps avoid running tests that aren't supported in certain environments. As an example, bpf tests from mainline aren't supported on stable kernels and have dependency on bleeding edge llvm. Being able to skip bpf on systems that can't meet this llvm dependency will be helpful. Kselftest can be built and installed from the main Makefile. This change help simplify Kselftest use-cases which addresses request from users. Kees Cook added per test timeout support to limit individual test run-time" * tag 'linux-kselftest-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: watchdog: Add command line option to show watchdog_info selftests: watchdog: Validate optional file argument selftests/kselftest/runner.sh: Add 45 second timeout per test kselftest: exclude failed TARGETS from runlist kselftest: add capability to skip chosen TARGETS selftests: Add kselftest-all and kselftest-install targets
2019-10-07kbuild: fix build error of 'make nsdeps' in clean treeMasahiro Yamada1-1/+1
Running 'make nsdeps' in a clean source tree fails as follows: $ make -s clean; make -s defconfig; make nsdeps [ snip ] awk: fatal: cannot open file `init/modules.order' for reading (No such file or directory) make: *** [Makefile;1307: modules.order] Error 2 make: *** Deleting file 'modules.order' make: *** Waiting for unfinished jobs.... The cause of the error is 'make nsdeps' does not build modules at all. Set KBUILD_MODULES to fix it. Reviewed-by: Matthias Maennich <maennich@google.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-10-06Linux 5.4-rc2Linus Torvalds1-2/+2
2019-10-01selftests: Add kselftest-all and kselftest-install targetsShuah Khan1-3/+2
Add kselftest-all target to build tests from the top level Makefile. This is to simplify kselftest use-cases for CI and distributions where build and test systems are different. Current kselftest target builds and runs tests on a development system which is a developer use-case. Add kselftest-install target to install tests from the top level Makefile. This is to simplify kselftest use-cases for CI and distributions where build and test systems are different. This change addresses requests from developers and testers to add support for installing kselftest from the main Makefile. In addition, make the install directory the same when install is run using "make kselftest-install" or by running kselftest_install.sh. Also fix the INSTALL_PATH variable conflict between main Makefile and selftests Makefile. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 17:19:41 +0000