summaryrefslogtreecommitdiff
path: root/Documentation/networking
AgeCommit message (Collapse)AuthorFilesLines
2013-12-31bonding: update Documentation/networking/bonding.txt for option lp_intervaldingtianhong1-0/+8
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-21packet: doc: add documentation for VLAN TPID deliveryAtzm Watanabe1-2/+7
Introduce TP_STATUS_VLAN_TPID_VALID bit into the documentation. Signed-off-by: Atzm Watanabe <atzm@stratosphere.co.jp> Acked-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19Merge branch 'master' of ↵David S. Miller1-0/+38
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2013-12-19 1) Use the user supplied policy index instead of a generated one if present. From Fan Du. 2) Make xfrm migration namespace aware. From Fan Du. 3) Make the xfrm state and policy locks namespace aware. From Fan Du. 4) Remove ancient sleeping when the SA is in acquire state, we now queue packets to the policy instead. This replaces the sleeping code. 5) Remove FLOWI_FLAG_CAN_SLEEP. This was used to notify xfrm about the posibility to sleep. The sleeping code is gone, so remove it. 6) Check user specified spi for IPComp. Thr spi for IPcomp is only 16 bit wide, so check for a valid value. From Fan Du. 7) Export verify_userspi_info to check for valid user supplied spi ranges with pfkey and netlink. From Fan Du. 8) RFC3173 states that if the total size of a compressed payload and the IPComp header is not smaller than the size of the original payload, the IP datagram must be sent in the original non-compressed form. These packets are dropped by the inbound policy check because they are not transformed. Document the need to set 'level use' for IPcomp to receive such packets anyway. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-19Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller1-57/+37
Marc Kleine-Budde says: ==================== this is a pull request of four patches for net-next/master. There is one patch by Markus Pargmann, which speeds up the c_can driver, a patch by John Whitmore which updates the in tree documentation. A patch by Jeff Kirsher which replaces the FSF's address by a link and a patch by Alexander Shiyan which converts the mcp251x driver to make use of managed resources. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18ipv4: new ip_no_pmtu_disc mode to always discard incoming frag needed msgsHannes Frederic Sowa1-2/+8
This new mode discards all incoming fragmentation-needed notifications as I guess was originally intended with this knob. To not break backward compatibility too much, I only added a special case for mode 2 in the receiving path. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+6
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17ipv4: improve documentation of ip_no_pmtu_discHannes Frederic Sowa1-2/+6
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17can: update MAINTAINERS and DocumentationJohn Whitmore1-57/+37
Changed MAINTAINERS file to add Documentation/networking/can.txt to the list of maintained files. can.txt: - Globally changed Socket CAN to SocketCAN - Removed section 3.3 from the document - Updated Section 7 - Corrected a few simple typos Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: John Whitmore <johnfwhitmore@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-12-16xfrm: Add file to document IPsec corner caseFan Du1-0/+38
Create Documentation/networking/ipsec.txt to document IPsec corner issues and other info, which will be useful when user deploying IPsec. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-12-11filter: doc: improve BPF documentationDaniel Borkmann1-47/+561
This patch significantly updates the BPF documentation and describes its internal architecture, Linux extensions, and handling of the kernel's BPF and JIT engine, plus documents how development can be facilitated with the help of bpf_dbg, bpf_asm, bpf_jit_disasm. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09net: phy: consolidate PHY reset in phy_init_hw()Florian Fainelli1-1/+2
There are quite a lot of drivers touching a PHY device MII_BMCR register to reset the PHY without taking care of: 1) ensuring that BMCR_RESET is cleared after a given timeout 2) the PHY state machine resuming to the proper state and re-applying potentially changed settings such as auto-negotiation Introduce phy_poll_reset() which will take care of polling the MII_BMCR for the BMCR_RESET bit to be cleared after a given timeout or return a timeout error code. In order to make sure the PHY is in a correct state, phy_init_hw() first issues a software reset through MII_BMCR and then applies any fixups. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09packet: introduce PACKET_QDISC_BYPASS socket optionDaniel Borkmann1-0/+21
This patch introduces a PACKET_QDISC_BYPASS socket option, that allows for using a similar xmit() function as in pktgen instead of taking the dev_queue_xmit() path. This can be very useful when PF_PACKET applications are required to be used in a similar scenario as pktgen, but with full, flexible packet payload that needs to be provided, for example. On default, nothing changes in behaviour for normal PF_PACKET TX users, so everything stays as is for applications. New users, however, can now set PACKET_QDISC_BYPASS if needed to prevent own packets from i) reentering packet_rcv() and ii) to directly push the frame to the driver. In doing so we can increase pps (here 64 byte packets) for PF_PACKET a bit: # CPUs -- QDISC_BYPASS -- qdisc path -- qdisc path[**] 1 CPU == 1,509,628 pps -- 1,208,708 -- 1,247,436 2 CPUs == 3,198,659 pps -- 2,536,012 -- 1,605,779 3 CPUs == 4,787,992 pps -- 3,788,740 -- 1,735,610 4 CPUs == 6,173,956 pps -- 4,907,799 -- 1,909,114 5 CPUs == 7,495,676 pps -- 5,956,499 -- 2,014,422 6 CPUs == 9,001,496 pps -- 7,145,064 -- 2,155,261 7 CPUs == 10,229,776 pps -- 8,190,596 -- 2,220,619 8 CPUs == 11,040,732 pps -- 9,188,544 -- 2,241,879 9 CPUs == 12,009,076 pps -- 10,275,936 -- 2,068,447 10 CPUs == 11,380,052 pps -- 11,265,337 -- 1,578,689 11 CPUs == 11,672,676 pps -- 11,845,344 -- 1,297,412 [...] 20 CPUs == 11,363,192 pps -- 11,014,933 -- 1,245,081 [**]: qdisc path with packet_rcv(), how probably most people seem to use it (hopefully not anymore if not needed) The test was done using a modified trafgen, sending a simple static 64 bytes packet, on all CPUs. The trick in the fast "qdisc path" case, is to avoid reentering packet_rcv() by setting the RAW socket protocol to zero, like: socket(PF_PACKET, SOCK_RAW, 0); Tradeoffs are documented as well in this patch, clearly, if queues are busy, we will drop more packets, tc disciplines are ignored, and these packets are not visible to taps anymore. For a pktgen like scenario, we argue that this is acceptable. The pointer to the xmit function has been placed in packet socket structure hole between cached_dev and prot_hook that is hot anyway as we're working on cached_dev in each send path. Done in joint work together with Jesper Dangaard Brouer. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+10
Merge 'net' into 'net-next' to get the AF_PACKET bug fix that Daniel's direct transmit changes depend upon. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-09packet: fix send path when running with proto == 0Daniel Borkmann1-0/+10
Commit e40526cb20b5 introduced a cached dev pointer, that gets hooked into register_prot_hook(), __unregister_prot_hook() to update the device used for the send path. We need to fix this up, as otherwise this will not work with sockets created with protocol = 0, plus with sll_protocol = 0 passed via sockaddr_ll when doing the bind. So instead, assign the pointer directly. The compiler can inline these helper functions automagically. While at it, also assume the cached dev fast-path as likely(), and document this variant of socket creation as it seems it is not widely used (seems not even the author of TX_RING was aware of that in his reference example [1]). Tested with reproducer from e40526cb20b5. [1] http://wiki.ipxwarzone.com/index.php5?title=Linux_packet_mmap#Example Fixes: e40526cb20b5 ("packet: fix use after free race in send path when dev is released") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Tested-by: Salam Noureddine <noureddine@aristanetworks.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06Merge branch 'for-davem' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Please pull this batch of updates intended for the 3.14 stream... For the mac80211 bits, Johannes says: "I have various improvements/cleanups/fixes all over, but the shortlog shows that Luis's regulatory work and mesh work from the cozybit folks are the biggest ones, along with the CSA fixes." Along with that, we have big batches of updates to brcmfmac, rtlwifi, and ath9k. There are updates to wcn36xx, rt2x00, and a handful of others as well. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06tcp: auto corkingEric Dumazet1-0/+10
With the introduction of TCP Small Queues, TSO auto sizing, and TCP pacing, we can implement Automatic Corking in the kernel, to help applications doing small write()/sendmsg() to TCP sockets. Idea is to change tcp_push() to check if the current skb payload is under skb optimal size (a multiple of MSS bytes) If under 'size_goal', and at least one packet is still in Qdisc or NIC TX queues, set the TCP Small Queue Throttled bit, so that the push will be delayed up to TX completion time. This delay might allow the application to coalesce more bytes in the skb in following write()/sendmsg()/sendfile() system calls. The exact duration of the delay is depending on the dynamics of the system, and might be zero if no packet for this flow is actually held in Qdisc or NIC TX ring. Using FQ/pacing is a way to increase the probability of autocorking being triggered. Add a new sysctl (/proc/sys/net/ipv4/tcp_autocorking) to control this feature and default it to 1 (enabled) Add a new SNMP counter : nstat -a | grep TcpExtTCPAutoCorking This counter is incremented every time we detected skb was under used and its flush was deferred. Tested: Interesting effects when using line buffered commands under ssh. Excellent performance results in term of cpu usage and total throughput. lpq83:~# echo 1 >/proc/sys/net/ipv4/tcp_autocorking lpq83:~# perf stat ./super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128 9410.39 Performance counter stats for './super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128': 35209.439626 task-clock # 2.901 CPUs utilized 2,294 context-switches # 0.065 K/sec 101 CPU-migrations # 0.003 K/sec 4,079 page-faults # 0.116 K/sec 97,923,241,298 cycles # 2.781 GHz [83.31%] 51,832,908,236 stalled-cycles-frontend # 52.93% frontend cycles idle [83.30%] 25,697,986,603 stalled-cycles-backend # 26.24% backend cycles idle [66.70%] 102,225,978,536 instructions # 1.04 insns per cycle # 0.51 stalled cycles per insn [83.38%] 18,657,696,819 branches # 529.906 M/sec [83.29%] 91,679,646 branch-misses # 0.49% of all branches [83.40%] 12.136204899 seconds time elapsed lpq83:~# echo 0 >/proc/sys/net/ipv4/tcp_autocorking lpq83:~# perf stat ./super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128 6624.89 Performance counter stats for './super_netperf 4 -t TCP_STREAM -H lpq84 -- -m 128': 40045.864494 task-clock # 3.301 CPUs utilized 171 context-switches # 0.004 K/sec 53 CPU-migrations # 0.001 K/sec 4,080 page-faults # 0.102 K/sec 111,340,458,645 cycles # 2.780 GHz [83.34%] 61,778,039,277 stalled-cycles-frontend # 55.49% frontend cycles idle [83.31%] 29,295,522,759 stalled-cycles-backend # 26.31% backend cycles idle [66.67%] 108,654,349,355 instructions # 0.98 insns per cycle # 0.57 stalled cycles per insn [83.34%] 19,552,170,748 branches # 488.244 M/sec [83.34%] 157,875,417 branch-misses # 0.81% of all branches [83.34%] 12.130267788 seconds time elapsed Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06Merge branch 'master' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-12-02Merge branch 'for-john' of ↵John W. Linville1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez1-2/+2
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-22net_tstamp,doc: Add test program for SIOC{G,S}HWTSTAMPBen Hutchings3-2/+138
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-19net_tstamp: Add SIOCGHWTSTAMP ioctl to match SIOCSHWTSTAMPBen Hutchings1-2/+7
SIOCSHWTSTAMP returns the real configuration to the application using it, but there is currently no way for any other application to find out the configuration non-destructively. Add a new ioctl for this, making it unprivileged. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-11-14tcp: tsq: restore minimal amount of queueingEric Dumazet1-3/+0
After commit c9eeec26e32e ("tcp: TSQ can use a dynamic limit"), several users reported throughput regressions, notably on mvneta and wifi adapters. 802.11 AMPDU requires a fair amount of queueing to be effective. This patch partially reverts the change done in tcp_write_xmit() so that the minimal amount is sysctl_tcp_limit_output_bytes. It also remove the use of this sysctl while building skb stored in write queue, as TSO autosizing does the right thing anyway. Users with well behaving NICS and correct qdisc (like sch_fq), can then lower the default sysctl_tcp_limit_output_bytes value from 128KB to 8KB. This new usage of sysctl_tcp_limit_output_bytes permits each driver authors to check how their driver performs when/if the value is set to a minimum of 4KB. Normally, line rate for a single TCP flow should be possible, but some drivers rely on timers to perform TX completion and too long TX completion delays prevent reaching full throughput. Fixes: c9eeec26e32e ("tcp: TSQ can use a dynamic limit") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Sujith Manoharan <sujith@msujith.org> Reported-by: Arnaud Ebalard <arno@natisbad.org> Tested-by: Sujith Manoharan <sujith@msujith.org> Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07bonding: document the new packets_per_slave optionNikolay Aleksandrov1-0/+9
Add new documentation for the packets_per_slave option available for balance-rr mode. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller1-0/+217
Marc Kleine-Budde says: ==================== here's a pull request for net-next. It includes a patch by Oliver Hartkopp et al. that adds documentation for the broadcast manager to Documentation/networking/can.txt. Three patches by me that clean up the netlink handling code in the CAN core. And another patch that removes a not needed function from the ti_hecc driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04tcp: properly handle stretch acks in slow startYuchung Cheng1-11/+0
Slow start now increases cwnd by 1 if an ACK acknowledges some packets, regardless the number of packets. Consequently slow start performance is highly dependent on the degree of the stretch ACKs caused by receiver or network ACK compression mechanisms (e.g., delayed-ACK, GRO, etc). But slow start algorithm is to send twice the amount of packets of packets left so it should process a stretch ACK of degree N as if N ACKs of degree 1, then exits when cwnd exceeds ssthresh. A follow up patch will use the remainder of the N (if greater than 1) to adjust cwnd in the congestion avoidance phase. In addition this patch retires the experimental limited slow start (LSS) feature. LSS has multiple drawbacks but questionable benefit. The fractional cwnd increase in LSS requires a loop in slow start even though it's rarely used. Configuring such an increase step via a global sysctl on different BDPS seems hard. Finally and most importantly the slow start overshoot concern is now better covered by the Hybrid slow start (hystart) enabled by default. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04tcp: enable sockets to use MSG_FASTOPEN by defaultYuchung Cheng1-2/+2
Applications have started to use Fast Open (e.g., Chrome browser has such an optional flag) and the feature has gone through several generations of kernels since 3.7 with many real network tests. It's time to enable this flag by default for applications to test more conveniently and extensively. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller11-31/+31
Conflicts: drivers/net/ethernet/emulex/benet/be.h drivers/net/netconsole.c net/bridge/br_private.h Three mostly trivial conflicts. The net/bridge/br_private.h conflict was a function signature (argument addition) change overlapping with the extern removals from Joe Perches. In drivers/net/netconsole.c we had one change adjusting a printk message whilst another changed "printk(KERN_INFO" into "pr_info(". Lastly, the emulex change was a new inline function addition overlapping with Joe Perches's extern removals. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-03net: extend net_device allocation to vmalloc()Eric Dumazet1-5/+5
Joby Poriyath provided a xen-netback patch to reduce the size of xenvif structure as some netdev allocation could fail under memory pressure/fragmentation. This patch is handling the problem at the core level, allowing any netdev structures to use vmalloc() if kmalloc() failed. As vmalloc() adds overhead on a critical network path, add __GFP_REPEAT to kzalloc() flags to do this fallback only when really needed. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Joby Poriyath <joby.poriyath@citrix.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-31can: add broadcast manager documentationOliver Hartkopp1-0/+217
This patch adds documentation about the broadcast manager. It's based on Brian Thorne's initial patch http://marc.info/?l=linux-can&m=138119382015496&w=2 and Daniele Venzano's work http://brownhat.org/docs/socketcan.html . Signed-off-by: Brian Thorne <hardbyte@gmail.com> Cc: Daniele Venzano <linux@brownhat.org> Cc: Andre Naujoks <nautsch2@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-10-30doc:net: Fix typo in Documentation/networkingMasanari Iida11-20/+20
Correct spelling typo in Documentation/networking Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-27Documentation/networking: netdev-FAQ typo correctionsRandy Dunlap1-11/+11
Various typo fixes to netdev-FAQ.txt: - capitalize Linux - hyphenate dual-word adjectives - minor punctuation fixes Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-19batman-adv: update email address for Marek LindnerMarek Lindner1-1/+1
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-19batman-adv: update email address for Simon WunderlichSimon Wunderlich1-1/+1
My university will stop email service for alumni in january 2014, please use my new e-mail address instead. Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-09batman-adv: remove vis functionalitySimon Wunderlich1-48/+2
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-03bonding: document the new xmit policy modes and update the changed onesNikolay Aleksandrov1-30/+36
Add new documentation for encap2+3 and encap3+4, also update the formula for the old modes due to the changes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-15bonding: Make alb learning packet interval configurableNeil Horman1-0/+6
running bonding in ALB mode requires that learning packets be sent periodically, so that the switch knows where to send responding traffic. However, depending on switch configuration, there may not be any need to send traffic at the default rate of 3 packets per second, which represents little more than wasted data. Allow the ALB learning packet interval to be made configurable via sysfs Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Acked-by: Veaceslav Falico <vfalico@redhat.com> CC: Jay Vosburgh <fubar@us.ibm.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11i40e: include i40e in kernel properJesse Brandeburg2-0/+117
This patch adds the changes for Kconfig, i40e.txt, MAINTAINERS, Kbuild and new i40e/Makefile to build i40e with the kernel. New driver build option is CONFIG_I40E Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> CC: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> CC: e1000-devel@lists.sourceforge.net Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-09-04net: ipv6: mld: document force_mld_version in ip-sysctl.txtDaniel Borkmann1-0/+5
Document force_mld_version parameter in ip-sysctl.txt. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-30driver:net:stmmac: Disable DMA store and forward mode if platform data ↵Sonic Zhang1-0/+3
force_thresh_dma_mode is set. Some synopsys ip implementation doesn't support DMA store and forward mode, such as BF60x. So, set force_thresh_dma_mode to use DMA thresholds only. Update document and devicetree as well. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net: packet: document available fanout policiesDaniel Borkmann1-0/+8
Update documentation to add fanout policies that are available. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29tcp: TSO packets automatic sizingEric Dumazet1-0/+9
After hearing many people over past years complaining against TSO being bursty or even buggy, we are proud to present automatic sizing of TSO packets. One part of the problem is that tcp_tso_should_defer() uses an heuristic relying on upcoming ACKS instead of a timer, but more generally, having big TSO packets makes little sense for low rates, as it tends to create micro bursts on the network, and general consensus is to reduce the buffering amount. This patch introduces a per socket sk_pacing_rate, that approximates the current sending rate, and allows us to size the TSO packets so that we try to send one packet every ms. This field could be set by other transports. Patch has no impact for high speed flows, where having large TSO packets makes sense to reach line rate. For other flows, this helps better packet scheduling and ACK clocking. This patch increases performance of TCP flows in lossy environments. A new sysctl (tcp_min_tso_segs) is added, to specify the minimal size of a TSO packet (default being 2). A follow-up patch will provide a new packet scheduler (FQ), using sk_pacing_rate as an input to perform optional per flow pacing. This explains why we chose to set sk_pacing_rate to twice the current rate, allowing 'slow start' ramp up. sk_pacing_rate = 2 * cwnd * mss / srtt v2: Neal Cardwell reported a suspect deferring of last two segments on initial write of 10 MSS, I had to change tcp_tso_should_defer() to take into account tp->xmit_size_goal_segs Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Van Jacobson <vanj@google.com> Cc: Tom Herbert <therbert@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29ipv6: drop fragmented ndisc packets by default (RFC 6980)Hannes Frederic Sowa1-0/+6
This patch implements RFC6980: Drop fragmented ndisc packets by default. If a fragmented ndisc packet is received the user is informed that it is possible to disable the check. Cc: Fernando Gont <fernando@gont.com.ar> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27Merge branch 'master' of ↵David S. Miller1-0/+40
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== A number of significant new features and optimizations for net-next/3.12. Highlights are: * "Megaflows", an optimization that allows userspace to specify which flow fields were used to compute the results of the flow lookup. This allows for a major reduction in flow setups (the major performance bottleneck in Open vSwitch) without reducing flexibility. * Converting netlink dump operations to use RCU, allowing for additional parallelism in userspace. * Matching and modifying SCTP protocol fields. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27Documentation/networking/: Update Intel wired LAN driver documentationJeff Kirsher8-43/+193
Updates the documentation to the Intel wired LAN drivers. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-23openvswitch: Mega flow implementationAndy Zhou1-0/+40
Add wildcarded flow support in kernel datapath. Wildcarded flow can improve OVS flow set up performance by avoid sending matching new flows to the user space program. The exact performance boost will largely dependent on wildcarded flow hit rate. In case all new flows hits wildcard flows, the flow set up rate is within 5% of that of linux bridge module. Pravin has made significant contributions to this patch. Including API clean ups and bug fixes. Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-08-20Merge branch 'master' of ↵David S. Miller1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next Conflicts: net/netfilter/nf_conntrack_proto_tcp.c The conflict had to do with overlapping changes dealing with fixing the use of an "s32" to hold the value returned by NAT_OFFSET(). Pablo Neira Ayuso says: ==================== The following batch contains Netfilter/IPVS updates for your net-next tree. More specifically, they are: * Trivial typo fix in xt_addrtype, from Phil Oester. * Remove net_ratelimit in the conntrack logging for consistency with other logging subsystem, from Patrick McHardy. * Remove unneeded includes from the recently added xt_connlabel support, from Florian Westphal. * Allow to update conntracks via nfqueue, don't need NFQA_CFG_F_CONNTRACK for this, from Florian Westphal. * Remove tproxy core, now that we have socket early demux, from Florian Westphal. * A couple of patches to refactor conntrack event reporting to save a good bunch of lines, from Florian Westphal. * Fix missing locking in NAT sequence adjustment, it did not manifested in any known bug so far, from Patrick McHardy. * Change sequence number adjustment variable to 32 bits, to delay the possible early overflow in long standing connections, also from Patrick. * Comestic cleanups for IPVS, from Dragos Foianu. * Fix possible null dereference in IPVS in the SH scheduler, from Daniel Borkmann. * Allow to attach conntrack expectations via nfqueue. Before this patch, you had to use ctnetlink instead, thus, we save the conntrack lookup. * Export xt_rpfilter and xt_HMARK header files, from Nicolas Dichtel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-13ipv6: make unsolicited report intervals configurable for mldHannes Frederic Sowa1-0/+18
Commit cab70040dfd95ee32144f02fade64f0cb94f31a0 ("net: igmp: Reduce Unsolicited report interval to 1s when using IGMPv3") and 2690048c01f32bf45d1c1e1ab3079bc10ad2aea7 ("net: igmp: Allow user-space configuration of igmp unsolicited report interval") by William Manley made igmp unsolicited report intervals configurable per interface and corrected the interval of unsolicited igmpv3 report messages resendings to 1s. Same needs to be done for IPv6: MLDv1 (RFC2710 7.10.): 10 seconds MLDv2 (RFC3810 9.11.): 1 second Both intervals are configurable via new procfs knobs mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval. (also added .force_mld_version to ipv6_devconf_dflt to bring structs in line without semantic changes) v2: a) Joined documentation update for IPv4 and IPv6 MLD/IGMP unsolicited_report_interval procfs knobs. b) incorporate stylistic feedback from William Manley v3: a) add new DEVCONF_* values to the end of the enum (thanks to David Miller) Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: William Manley <william.manley@youview.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09Revert "net: sctp: convert sctp_checksum_disable module param into sctp sysctl"David S. Miller1-8/+0
This reverts commit cda5f98e36576596b9230483ec52bff3cc97eb21. As per Vlad's request. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: sctp: convert sctp_checksum_disable module param into sctp sysctlDaniel Borkmann1-0/+8
Get rid of the last module parameter for SCTP and make this configurable via sysctl for SCTP like all the rest of SCTP's configuration knobs. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-31Documentation: add networking/netdev-FAQ.txtPaul Gortmaker2-0/+226
A collection of expectations and operational details about how networking development takes place in the context of the netdev mailing list. The content is meant to capture specific items that are unique to netdev workflow, and not re-document generic linux expectations that are already captured elsewhere. This was originally proposed[1] as a regular posting mailing list FAQ, but it probably is more universally accessible here in tree. [1] https://lwn.net/Articles/559211/ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 10:46:17 +0000