summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-04-29[XFS] simplify xfs_lookupChristoph Hellwig1-7/+15
Opencode xfs-kill-xfs_dir_lookup_int here, which gets rid of a lock roundtrip, and lots of stack space. Also kill the di_mode == 0 check that has been done in xfs_iget for a few years now. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30901a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29[XFS] xfs_rename: pass resblks to xfs_dir_removenameChristoph Hellwig1-1/+1
Similar to rmdir and remove - avoids a potential transaction reservation overrun. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30900a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29[XFS] kill di_mode checks after xfs_igetChristoph Hellwig5-20/+2
Unless XFS_IGET_CREATE is passed xfs_iget will return ENOENT if it encounters an inode with di_mode == 0. Remove the duplicated checks in the callers. (the log recovery case is not touched for now) SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30898a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29[XFS] kill xfs_getattrChristoph Hellwig3-160/+7
It's currently used by the ACL code to read di_mode/di_uid, but these are simple 32bit scalar values we can just read directly without locking. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30897a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-29[XFS] Remove VN_IS* macros and related cruft.Christoph Hellwig3-43/+7
We can just check i_mode / di_mode directly. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30896a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-28drivers: fix integer as NULL pointer warningsHarvey Harrison6-6/+6
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28media: fix integer as NULL pointer warningsHarvey Harrison10-13/+16
drivers/media/video/v4l2-common.c:719:16: warning: Using plain integer as NULL pointer drivers/media/video/au0828/au0828-dvb.c:122:19: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1101:22: warning: Using plain integer as NULL pointer drivers/media/video/ivtv/ivtv-yuv.c:1102:23: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-audio.c:78:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-video-v4l.c:84:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-v4l2.c:1264:9: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-context.c:197:28: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c:126:39: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:133:32: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:145:31: warning: Using plain integer as NULL pointer drivers/media/video/pvrusb2/pvrusb2-dvb.c:177:55: warning: Using plain integer as NULL pointer drivers/media/video/videobuf-core.c:100:9: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28scsi: fix integer as NULL pointer warningsHarvey Harrison8-15/+15
drivers/scsi/aic7xxx/aic7770_osm.c:53:58: warning: Using plain integer as NULL pointer drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:355:47: warning: Using plain integer as NULL pointer drivers/scsi/aic7xxx/aic7xxx_osm_pci.c:372:55: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:997:28: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:1003:28: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:1165:46: warning: Using plain integer as NULL pointer drivers/scsi/fdomain.c:1446:40: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:1650:51: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:3171:42: warning: Using plain integer as NULL pointer drivers/scsi/sym53c8xx_2/sym_hipd.c:5732:52: warning: Using plain integer as NULL pointer drivers/scsi/ncr53c8xx.c:8189:31: warning: Using plain integer as NULL pointer drivers/scsi/ncr53c8xx.c:8225:34: warning: Using plain integer as NULL pointer drivers/scsi/dpt_i2o.c:156:32: warning: Using plain integer as NULL pointer drivers/scsi/ultrastor.c:954:42: warning: Using plain integer as NULL pointer drivers/scsi/ultrastor.c:1104:18: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6Linus Torvalds33-1826/+961
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (35 commits) siimage: coding style cleanup (take 2) ide-cd: clean up cdrom_analyze_sense_data() ide-cd: fix test unsigned var < 0 ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[] piix: add Asus Eee 701 controller to short cable list ARM: always select HAVE_IDE remove the broken ETRAX_IDE driver ide: remove ->dma_prdtable field from ide_hwif_t ide: remove ->dma_vendor{1,3} fields from ide_hwif_t scc_pata: add ->dma_host_set and ->dma_start methods ide: skip "VLB sync" if host uses MMIO ide: add ide_pad_transfer() helper ide: remove ->INW and ->OUTW methods ide: use IDE I/O helpers directly in ide_tf_{load,read}() ns87415: add ->tf_read method scc_pata: add ->tf_{load,read} methods ide-h8300: add ->tf_{load,read} methods ide-cris: add ->tf_{load,read} methods ide: add ->tf_load and ->tf_read methods ide: move ide_tf_{load,read} to ide-iops.c ...
2008-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds11-254/+319
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: kconfig: add named choice group kconfig: fix choice dependency check kconifg: 'select' considered less evil dontdiff: ignore timeconst.h dontdiff: add modules.order kbuild: fix unportability in gen_initramfs_list.sh kbuild: fix help output to show correct arch kbuild: show defconfig subdirs in make help kconfig: reversed borderlines in inputbox
2008-04-28drivers: atm, char fix integer as NULL pointer warningsHarvey Harrison3-3/+3
drivers/atm/nicstar.c:418:25: warning: Using plain integer as NULL pointer drivers/char/drm/r128_cce.c:820:25: warning: Using plain integer as NULL pointer drivers/char/tty_io.c:1183:10: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28mm: fix integer as NULL pointer warningsHarvey Harrison1-1/+1
mm/hugetlb.c:207:11: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28kernel: fix integer as NULL pointer warningsHarvey Harrison2-2/+3
kernel/cpuset.c:1268:52: warning: Using plain integer as NULL pointer kernel/pid_namespace.c:95:24: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Reviewed-by: Paul Jackson <pj@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28init: fix integer as NULL pointer warningsHarvey Harrison2-2/+2
init/do_mounts_rd.c:215:13: warning: Using plain integer as NULL pointer init/do_mounts_md.c:136:45: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28siimage: coding style cleanup (take 2)Sergei Shtylyov1-119/+113
Fix 18 errors and several warnings given by checkpatch.pl: - use of C99 // comments; - trailing whitespace; - 'switch' and 'case' not at the same indentation level; - no space before the open parenthesis of the 'if' and 'switch' statements; - space between function name and open parenthesis (though I have introduced such warnins in some places since the code looks prettier with the spaces); - including <asm/io.h> instead of <linux/io.h>; - line over 80 characters. In addition to these changes, also do the following: - make the arrays in sil_set_pio_mode() 'static', and make the arrays in sil_set_dma_mode() 'static const'; - change the string of the 'if' statements into the 'switch' statement in sil_pata_udma_filter(); - drop the needless '==' operators from the 'if' statements where a condition is a mere bit test; - remove needless initializer for the 'tmp' variable in init_chipset_siimage(); - beautify groups of the variable initializers and assignment operators; - add new line after variable definitions; - remove new line between the comment and the statements it refers to; - remove needless curly braces and parentheses; - fix typos, capitalize acronyms, etc. in the comments... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-cd: clean up cdrom_analyze_sense_data()Roel Kluin1-5/+2
[bart: fix handling of bio_sectors(failed_command->bio) == 0] Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-cd: fix test unsigned var < 0Roel Kluin1-2/+0
valid is unsigned and cannot be below 0. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Cc: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]Alexander Smal1-0/+2
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28piix: add Asus Eee 701 controller to short cable listBartlomiej Zolnierkiewicz1-0/+1
Based on ata_piix patch by Dan McGee. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ARM: always select HAVE_IDEAdrian Bunk2-15/+1
It's plain wrong for PCMCIA to select HAVE_IDE that implies e.g. the availability of an asm/ide.h It turns out this was done for ARM, and we can simply always select HAVE_IDE on ARM instead of manually tracking which platforms might possible have an IDE controller directly or indirectly. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Russell King <rmk+lkml@arm.linux.org.uk> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28remove the broken ETRAX_IDE driverAdrian Bunk4-1189/+1
ETRAX_IDE was marked as broken last year with the comment "it doesn't even compile currently". Remove it since it won't get fixed in the near future. On Mon, Apr 14, 2008 at 02:50:19PM +0200, Mikael Starvik wrote: > You can remove it for now and we will resubmit a new if/when we get around > to fix it. [bart: ported it over IDE tree] Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Mikael Starvik <mikael.starvik@axis.com> Cc: Jesper Nilsson <Jesper.Nilsson@axis.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->dma_prdtable field from ide_hwif_tBartlomiej Zolnierkiewicz3-7/+4
* Use 'hwif->dma_base + {4,8}' instead of hwif->dma_prdtable in {ide,scc}_dma_setup(). * Remove no longer needed ->dma_prdtable field from ide_hwif_t. While at it: * Use ATA_DMA_TABLE_OFS define. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->dma_vendor{1,3} fields from ide_hwif_tBartlomiej Zolnierkiewicz3-10/+4
* Use 'hwif->dma_base + {1,3}' instead of hwif->dma_vendor{1,3} in pdc202xx_new host driver. * Remove no longer needed ->dma_vendor{1,3} fields from ide_hwif_t. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28scc_pata: add ->dma_host_set and ->dma_start methodsBartlomiej Zolnierkiewicz1-4/+50
Add ->dma_host_set and ->dma_start methods (+ __scc_dma_end() helper) so scc_ide_{in,out}b() can be used directly. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: skip "VLB sync" if host uses MMIOBartlomiej Zolnierkiewicz1-10/+10
* Skip "VLB sync" in ata_{in,out}put_data() if host uses MMIO. * Use I/O ops directly in ata_vlb_sync() an drop no longer needed 'ide_drive_t *drive' argument. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ide_pad_transfer() helperBartlomiej Zolnierkiewicz5-33/+24
* Add ide_pad_transfer() helper (which uses ->{in,out}put_data methods internally so the transfer is also padded to drive+host requirements) and use it instead of ide_atapi_{write_zeros,discard_data}(). * Remove no longer needed ide_atapi_{write_zeros,discard_data}(). Cc: Borislav Petkov <petkovbb@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->INW and ->OUTW methodsBartlomiej Zolnierkiewicz5-47/+3
* Remove no longer used ->INW and ->OUTW methods. While at it: * scc_pata.c: scc_ide_{out,in}w() is called only in scc_tf_{load,read}() so inline it there. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: use IDE I/O helpers directly in ide_tf_{load,read}()Bartlomiej Zolnierkiewicz1-27/+56
There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ns87415: add ->tf_read methodBartlomiej Zolnierkiewicz1-0/+44
Add ->tf_read method so out{b,w}(), in{b,w}() and superio_ide_inb() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28scc_pata: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz1-0/+87
Add ->tf_{load,read} methods so scc_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-h8300: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz1-0/+88
Add ->tf_{load,read} methods so outb()/inb() and mm_outw()/mm_inw() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-cris: add ->tf_{load,read} methodsBartlomiej Zolnierkiewicz1-0/+87
Add ->tf_{load,read} methods so cris_ide_{outb,outw,inb,inw}() can be used directly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ->tf_load and ->tf_read methodsBartlomiej Zolnierkiewicz5-9/+14
* Add ->tf_load and ->tf_read methods to ide_hwif_t and set the default methods in default_hwif_transport(). * Use ->tf_{load,read} instead o calling ide_tf_{load,read}() directly. * Make ide_tf_{load,read}() static. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: move ide_tf_{load,read} to ide-iops.cBartlomiej Zolnierkiewicz3-88/+88
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: factor out debugging code from ide_tf_load()Bartlomiej Zolnierkiewicz3-12/+20
Factor out debugging code from ide_tf_load() to ide_tf_dump() helper and update ide_tf_load() users accordingly. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add ide_execute_pkt_cmd() helperBartlomiej Zolnierkiewicz6-18/+17
Add ide_execute_pkt_cmd() helper for executing PACKET command, then convert ATAPI device drivers to use it. As a nice side-effect this fixes ide-{floppy,tape,scsi} w.r.t. ide_lock taking (ide-cd was OK). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-{floppy,tape,scsi}: 400ns delay is required after executing the commandBartlomiej Zolnierkiewicz3-0/+3
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: always use ->OUTBSYNC method for executing commandsBartlomiej Zolnierkiewicz6-9/+14
Always use ->OUTBSYNC method for executing commands so the posting is done if needed (this affects only pmac and scc_pata host drivers at the moment). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28siimage: remove proc_reports_siimage()Bartlomiej Zolnierkiewicz1-25/+8
* proc_reports_siimage() is now only called by init_chipset_siimage() so inline it there. * Use array instead of switch statement for reporting clock modes. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28siimage: add sil_* I/O opsBartlomiej Zolnierkiewicz1-159/+140
Add sil_iowrite{8,16,32}() and sil_ioread{8,16}() helpers, then use them to merge code accessing configuration registers through PCI and MMIO together. [ because of this SATA initialization bits from setup_mmio_siimage() are moved to init_chipset_siimage() ] This also cuts code size a bit: text data bss dec hex filename 4437 164 0 4601 11f9 drivers/ide/pci/siimage.o.before 3979 164 0 4143 102f drivers/ide/pci/siimage.o.after While at it: * Use I/O ops directly instead of using ->IN{B,W} and ->OUT{B,W}. * Fixup CodingStyle in setup_mmio_siimage(). * Rename 'tmpbyte' variable to 'tmp' in init_chipset_siimage(). There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28siimage: do clocking register posting earlier in setup_mmio_siimage()Bartlomiej Zolnierkiewicz1-3/+3
Do clocking register posting earlier in setup_mmio_siimage() to match code in init_chipset_siimage(). This is a preparation for the next patch which merges PCI and MMIO code paths together. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: remove ->INS{W,L} and ->OUTS{W,L} methodsBartlomiej Zolnierkiewicz5-81/+48
* Use ins{w,l}()/outs{w,l}() and __ide_mm_ins{w,l}()/__ide_mm_outs{w,l}() directly in ata_{in,out}put_data() (by using IDE_HFLAG_MMIO host flag to decide which I/O ops are required). * Remove no longer needed ->INS{W,L} and ->OUTS{W,L} methods (ide-h8300, au1xxx-ide and scc_pata implement their own ->{in,out}put_data methods). There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: add IDE_HFLAG_MMIO host flag (take 2)Bartlomiej Zolnierkiewicz9-2/+12
* Add IDE_HFLAG_MMIO host flag and set it for hosts which use default_hwif_mmiops(). v2: * Fix kernel panic in pmac host driver (',' should be '|'). Thanks to Kamalesh for reporting it + testing the fix and to Andrew for hinting me about the source of the issue. Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide-h8300: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz1-0/+15
v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28au1xxx-ide: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz1-0/+14
v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28scc_pata: add ->{in,out}put_data methods (take 2)Bartlomiej Zolnierkiewicz1-0/+35
v2: * Update ->{in,out}_data methods to take 'struct request *rq' argument (thanks to Stephen Rothwell for catching it). There should be no functional changes caused by this patch. Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: merge ->atapi_*put_bytes and ->ata_*put_data methodsBartlomiej Zolnierkiewicz12-172/+113
* Merge ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods into new ->{in,out}put_data methods which take number of bytes to transfer as an argument and always do padding. While at it: * Use 'hwif' or 'drive->hwif' instead of 'HWIF(drive)'. There should be no functional changes caused by this patch (all users of ->ata_{in,out}put_data methods were using multiply-of-4 word counts). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28falconide/q40ide: add ->atapi_*put_bytes and ->ata_*put_data methods (take 2)Bartlomiej Zolnierkiewicz8-36/+98
* Add ->atapi_{in,out}put_bytes and ->ata_{in,out}put_data methods to falconide and q40ide host drivers (->ata_* methods are implemented on top of ->atapi_* methods so they also do byte-swapping now). * Cleanup atapi_{in,out}put_bytes(). v2: * Add 'struct request *rq' argument to ->ata_{in,out}put_data methods and don't byte-swap disk fs requests (we shouldn't un-swap fs requests because fs itself is stored byte-swapped on the disk) - this is how things were done before the patch (ideally device mapper should be used instead but it would break existing setups and would have some performance impact). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michael Schmitz <schmitz@debian.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Richard Zidlicky <rz@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ide: fix au1xxx-ide breakageBartlomiej Zolnierkiewicz1-2/+0
On Monday 28 April 2008, Sergei Shtylyov wrote: > Hello, I wrote: > > > Fix these warnings emitted when compiling drivers/ide/mips/au1xxx-ide.c: > > > include/asm/mach-au1x00/au1xxx_ide.h:137: warning: 'auide_tune_drive' declared > > `static' but never defined > > include/asm/mach-au1x00/au1xxx_ide.h:138: warning: 'auide_tune_chipset' declared > > `static' but never defined > > > by wiping out the whole "function prototyping" section from the header file > > <asm-mips/mach-au1x00/au1xxx_ide.h> as it mostly declared functions that are > > already dead in the IDE driver; move the only useful prototype into the driver. > > > > Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> > > > --- > > I'm not sure thru which tree this should go -- probably thru Linux/MIPS one... > > > Bart, au1xxx-ide-fix-mwdma-support.patch will probably need to be updated to > > remove that added prototype since it won't be needed anymore... > > Which you haven't done either in that patch or in > au1xxx-ide-use-init_dma-method.patch. So, face the consequences: > > drivers/ide/mips/au1xxx-ide.c:456: error: conflicting types for 'auide_ddma_init' > drivers/ide/mips/au1xxx-ide.c:51: error: previous declaration of > 'auide_ddma_init' was here > drivers/ide/mips/au1xxx-ide.c:456: error: conflicting types for 'auide_ddma_init' > drivers/ide/mips/au1xxx-ide.c:51: error: previous declaration of > 'auide_ddma_init' was here > drivers/ide/mips/au1xxx-ide.c:51: warning: 'auide_ddma_init' used but never > defined Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-28ptrace: conditionalize compat_ptrace_requestRoland McGrath1-5/+2
My recent additions to compat_ptrace_request made it mandatory for CONFIG_COMPAT arch's to define copy_siginfo_from_user32. This broke some builds, though they all really should get cleaned up in that way. Since all the arch's that actually call compat_ptrace_request have now been cleaned up to use the generic compat_sys_ptrace, we can avoid the build problems on the crufty arch's by changing the conditionals on the definition. Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 22:09:36 +0000