summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-04-24[POWERPC] Remove find_all_nodesStephen Rothwell2-18/+0
This old interface has no more users. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Remove find_compatible_devicesStephen Rothwell4-33/+22
This is an old interface and is replaced by of_find_compatible_node. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Cleanup and fix breakage in tlbflush.hDavid Gibson3-65/+81
BenH's commit a741e67969577163a4cfc78d7fd2753219087ef1 in powerpc.git, although (AFAICT) only intended to affect ppc64, also has side-effects which break 44x. I think 40x, 8xx and Freescale Book E are also affected, though I haven't tested them. The problem lies in unconditionally removing flush_tlb_pending() from the versions of flush_tlb_mm(), flush_tlb_range() and flush_tlb_kernel_range() used on ppc64 - which are also used the embedded platforms mentioned above. The patch below cleans up the convoluted #ifdef logic in tlbflush.h, in the process restoring the necessary flushes for the software TLB platforms. There are three sets of definitions for the flushing hooks: the software TLB versions (revised to avoid using names which appear to related to TLB batching), the 32-bit hash based versions (external functions) amd the 64-bit hash based versions (which implement batching). It also moves the declaration of update_mmu_cache() to always be in tlbflush.h (previously it was in tlbflush.h except for PPC64, where it was in pgtable.h). Booted on Ebony (440GP) and compiled for 64-bit and 32-bit multiplatform. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Save trap number in bad_stackOlof Johansson3-2/+10
Save the trap number in the case of getting a bad stack in an exception handler. It is sometimes useful to know what exception it was that caused this to happen. Without this, no trap number is reported. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Rename MPIC_BROKEN_U3 to MPIC_U3_HT_IRQSMichael Ellerman10-26/+26
Rename MPIC_BROKEN_U3 to something a little more descriptive. Its effect is to enable support for HT irqs behind the PCI-X/HT bridge on U3/U4 (aka. CPC9x5) parts. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Fix comment typo in Kurobox device treeGrant Likely2-6/+6
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: Use `unsigned long' for malloc sizesGeert Uytterhoeven3-20/+21
Use `unsigned long' for malloc sizes, to match common practice and types used by most callers and callees. Also use `unsigned long' for integers representing pointers in simple_alloc. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@eu.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controllerDavid Gibson3-0/+366
This patch adds a driver to arch/powerpc/sysdev for the UIC, the on-chip interrupt controller from IBM/AMCC 4xx chips. It uses the new irq host mapping infrastructure. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Re-organize Kconfig code for 4xx in arch/powerpcDavid Gibson1-222/+150
Now that we always take a device tree in arch/powerpc, there's no good reason not to allow a single kernel to support multiple embedded 4xx boards - the correct platform code can be selected based on the device tree information. Therefore, this patch re-arranges the 4xx Kconfig code to allow this. In addition we: - use "select" instead of depends to configure the correct config options for specific 4xx CPUs and workarounds, which makes the information about specific boards and CPUs less scattered. - Some old, unused (in arch/powerpc) config options are removed: WANT_EARLY_SERIAL, IBM_OCP, etc. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] kprobes: Eliminate sstep exception if instruction can be emulatedAnanth N Mavinakayanahalli2-1/+40
For cases when probes are placed on instructions that can be emulated, don't take the single-step exception. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Emulate more instructions in softwareAnanth N Mavinakayanahalli1-1/+44
Emulate a few more instructions in software - especially useful during singlestepping (xmon/kprobes). Instructions emulated with this patch are mfcr/mtcr rX, mfxer/mtxer rX, mflr/mtlr rX, mfctr/mtctr rX and mr rA,rB. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: cuboot for 83xxScott Wood2-1/+70
This adds cuboot support for MPC83xx platforms. A device tree used with this must have linux,stdout-path in /chosen and linux,network-index in any network device nodes that need mac addresses assigned. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: Add ppcboot.hScott Wood1-0/+108
This file describes the bd_t struct, which is used by old versions of U-boot to pass information to the kernel. Platform code that needs to interoperate with such firmware can use this; it should not be used for anything new. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: Add a cuboot platform and a cuImage targetScott Wood4-5/+34
The cuImage target will build a uImage with bootwrapper code and a device tree. The default device tree and platform file are determined by the kernel configuration. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] bootwrapper: Add CONFIG_DEVICE_TREEScott Wood1-0/+24
This provides a way to tell the bootwrapper makefile which device tree to include by default. The wrapper can still be invoked standalone to wrap with a different device tree without reconfiguring the kernel, if that is desired. The user will only be asked to provide a device tree if the platform selects CONFIG_WANT_DEVICE_TREE. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: GPIO MDIO of_platform driverOlof Johansson3-1/+354
MDIO driver for PHY's connected via GPIO as on the PA Semi Electra eval board. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: PA6T oprofile supportOlof Johansson9-13/+312
Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: Reset mpic on bootOlof Johansson1-1/+1
Reset MPIC on boot to clear some timer state that firmware might leave configured. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: Enable one more hid bitOlof Johansson1-1/+1
Minor HID change. Firmware can't know that we want this set so we have to set it in the kernel. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: Allow 8KB config space for I/O bridgeOlof Johansson1-3/+13
Device 0 function 0 on the root bus is really a two-function bus agent, but only the first function is visible. Because of this, we need to allow config accesses into the second range. Modify the check for valid offsets accordingly. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Fix PowerPC 750CL and 750GX CPU featuresJosh Boyer2-5/+9
PowerPC 750CL has high BATs. The patch below adds a CPU_FTRS_750CL that includes that. Without it, the original firmware mappings in the high BATs aren't cleared which continue to override the linux translations. It also adds CPU_FTR_COMMON to CPU_FTRS_750GX for completeness. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] hvc_console: Typo fixeswill schmidt1-9/+9
Fix a handful of comment typos for hvc_console. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] hvc_console: Polling mode timer backoffWill Schmidt1-6/+25
Add a back-off mechanism to hvc_console's polling logic. This change drops the timers/second ratio from ~90 to ~1/2 while the console is idle. This change is most noticeable when watching /proc/timer_stats output. This only affects when the hvc_console is running in poll mode, i.e. power4 and cell systems. I've tested on Power4, Michael Ellerman has both contributed to the patch and tested on cell. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Rename last get_property callsStephen Rothwell2-4/+4
These got added recently. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] Partially revert "Add correct interrupt property for pegasos ide"Paul Mackerras1-0/+11
It turns out that commit e48059225c2edc6f1e5a2008261f1efdf606f247 breaks some existing systems that use the via82cxxx driver. This reverts the change to via82cxxx.c. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24Merge branch 'for-2.6.22' of ↵Paul Mackerras10-110/+581
master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22
2007-04-24Merge branch 'spufs' of ↵Paul Mackerras16-366/+591
master.kernel.org:/pub/scm/linux/kernel/git/arnd/cell-2.6 into for-2.6.22
2007-04-24Merge branch 'kconfig' of ↵Paul Mackerras7-166/+109
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into for-2.6.22
2007-04-23[POWERPC] update cell_defconfigArnd Bergmann1-28/+29
Sync with the Kconfig changes, and enable some options for celleb Cc: Ishizaki Kou <kou.ishizaki@toshiba.co.jp> Signed-off-by: Jens Osterkamp <jens@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cell: enable RTAS-based PTCAL for Cell XDR memoryJeremy Kerr1-0/+160
Enable Periodic Recalibration (PTCAL) support for Cell XDR memory, using the new ibm,cbe-start-ptcal and ibm,cbe-stop-ptcal RTAS calls. Tested on QS20 and QS21 (by Thomas Huth). It seems that SLOF has problems disabling, at least on QS20; this patch should only be used once these problems have been addressed. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cell: add support for proper device-treeChristian Krafft1-30/+88
This patch adds support for a proper device-tree. A porper device-tree on cell contains be nodes for each CBE containg nodes for SPEs and all the other special devices on it. Ofcourse oldschool devicetree is still supported. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] add of_iomap functionChristian Krafft2-17/+13
The of_iomap function maps memory for a given device_node and returns a pointer to that memory. This is used at some places, so it makes sense to a seperate function. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] pmi probe device by device-typeChristian Krafft1-0/+1
At the moment the pmi device driver is probing for devices with a given type and a given name. As there may be devices of the same type but with a different name, probing should be done also for device type only. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] add check for initialized driver data to pmi driverChristian Krafft1-2/+7
This patch adds a check for the private driver data to be initialized. The bug showed up, as the caller found a pmi device by it's type. Whereas the pmi driver probes for the type and the name. Since the name was not as the driver expected, it did not initialize. A more relaxed probing will be supplied with an extra patch, too. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cell: use pmi in cpufreq driverChristian Krafft1-1/+80
The new PMI driver was added in order to support cpufreq on blades that require the frequency to be controlled by the service processor, so use it on those. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cbe_thermal: add throttling attributes to cpu and spu nodesChristian Krafft1-1/+154
This patch adds some attributes the cpu and spu nodes: /sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_begin /sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_end /sys/devices/system/[c|s]pu/[c|s]pu*/thermal/throttle_full_stop Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cbe_thermal: clean up computation of temperatureChristian Krafft1-18/+10
This patch introduces a little function for transforming register values into temperature. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] cell: add cbe_node_to_cpu functionChristian Krafft4-19/+45
This patch adds code to deal with conversion of logical cpu to cbe nodes. It removes code that assummed there were two logical CPUs per CBE. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spu_base: fix initialisation on systems with no SPEsJeremy Kerr2-3/+10
This change fixes the case where spu_base and spufs are initialised on a system with no SPEs - unconditionally create the spu_lists so spu_alloc doesn't explode, and check for spu_management ops before starting spufs. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> arch/powerpc/platforms/cell/spu_base.c | 7 ++++--- arch/powerpc/platforms/cell/spufs/inode.c | 5 +++++ 2 files changed, 9 insertions(+), 3 deletions(-)
2007-04-23[POWERPC] spu_base: remove cleanup_spu_baseChristoph Hellwig1-37/+10
spu_base.c is always built into the kernel image, so there is no need for a cleanup function. And some of the things it does are in the way for my following patches, so I'd rather get rid of it ASAP. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: various run.c cleanupsChristoph Hellwig1-20/+31
- remove the spu_acquire_runnable from spu_run_init. I need to opencode it in spufs_run_spu in the next patch - remove various inline attributes, we don't really want to inline long functions with multiple callsites - cleanup return values and runcntl_write calls in spu_run_init - use normal kernel codingstyle in spu_reacquire_runnable Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: enable SPU coredump for kernel-builtin spufsAkinobu Mita1-18/+16
spu_coredump_calls.owner is NULL in case of a builtin spufs, so the checks in here break. Check for the availability of the spu_coredump_calls variable instead. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: fix memory leak on coredumpArnd Bergmann1-9/+10
Dynamically allocated read/write buffer in spufs_arch_write_note() will not be freed. Convert it to get_free_page at the same time. Cc: Akinobu Mita <mita@fixstars.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: Minor cleanup of spu_waitJeremy Kerr1-7/+6
Change the loop in spu_wait to be a little more straightforward. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: add mode= mount optionJeremy Kerr1-4/+10
Add a 'mode=' option to spufs mount arguments. This allows more control over access to the top-level spufs directory. Tested on Cell. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: use memcpy_fromio() to copy from local storeAkinobu Mita1-6/+6
GCC may generates inline copy loop to handle memcpy() function instead of kernel defined memcpy(). But this inlined version of memcpy() causes an alignment interrupt when copying from local store. This patch uses memcpy_fromio() and memcpy_toio to copy local store to prevent memcpy() being inlined. Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: avoid spurious memory barriersChristoph Hellwig1-14/+0
We now have proper locking around assignets of the mapping pointers, and the spin_unlock implies enough of a barrier to get rid of the explicit one. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: fix memory leak on spufs reloadingAkinobu Mita1-0/+6
When SPU isolation mode enabled, isolated_loader would be allocated by spufs_init_isolated_loader() on module_init(). But anyone do not free it. This patch introduces spufs_exit_isolated_loader() which is the opposite of spufs_init_isolated_loader() and called on module_exit(). Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: fix missing error handling in module_init()Akinobu Mita1-6/+10
spufs module_init forgot to call a few cleanup functions on error path. This patch also includes cosmetic changes in spu_sched_init() (identation fix and return error code). [modified by hch to apply ontop of the latest schedule changes] Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2007-04-23[POWERPC] spufs: check spu_acquire_runnable() return valueAkinobu Mita1-1/+4
This patch checks return value of spu_acquire_runnable() in spufs_mfc_write(). Signed-off-by: Akinobu Mita <mita@fixstars.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 15:04:47 +0000