summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-25spi/davinci: Fix clock prescale factor computationThomas Koeller1-3/+9
Computation of the clock prescaler value returned bogus results if the requested SPI clock was impossible to set. It now sets either the maximum or minimum clock frequency, as appropriate. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi: move bitbang txrx utility functions to private headerhartleys7-111/+98
A number of files in drivers/spi fail checkincludes.pl due to the double include of <linux/spi/spi_bitbang.h>. The first include is needed to get the struct spi_bitbang definition and the spi_bitbang_* function prototypes. The second include happens after defining EXPAND_BITBANG_TXRX to get the inlined bitbang_txrx_* utility functions. The <linux/spi/spi_bitbang.h> header is also included by a number of other spi drivers, as well as some arch/ code, in order to use struct spi_bitbang and the associated functions. To fix the double include, and remove any potential confusion about it, move the inlined bitbang_txrx_* functions to a new private header in drivers/spi and also remove the need to define EXPAND_BITBANG_TXRX. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/mpc5121: Add SPI master driver for MPC5121 PSCAnatolij Gustschin4-0/+585
Signed-off-by: John Rigby <jcrigby@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25powerpc/mpc5121: move PSC FIFO memory init to platform codeAnatolij Gustschin2-69/+78
Since PSC could also be used in other modes than UART mode we move PSC FIFO memory initialization from serial driver to common platform code. The initialized FIFO memory slices may not overlap, so the most easy way would be to configure them all at once at init time for all PSC devices. This is now done by this patch. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/ep93xx: implemented driver for Cirrus EP93xx SPI controllerMika Westerberg5-0/+1071
This patch adds an SPI master driver for the Cirrus EP93xx SPI controller found in EP93xx chips. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25Documentation/spi/* compile warning fixPrarit Bhargava1-2/+2
Fix this warning: Documentation/spi/spidev_fdx.c: In function `do_msg': Documentation/spi/spidev_fdx.c:61: warning: cast from pointer to integer of different size Documentation/spi/spidev_fdx.c:64: warning: cast from pointer to integer of different size buf should be unsigned long to match native arch on 32-bit x86 compile. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/omap2_mcspi: Check params before dereference or useScott Ellis1-8/+11
Check spi->chip_select for range before use. Signed-off-by: Scott Ellis <scott@jumpnowtek.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/omap2_mcspi: add turbo mode supportRoman Tereshonkov1-21/+111
Turbo mode allows to read data to shift register when rx-buffer is full thus improving the perfomance. This feature is available for RX-only mode. In PIO turbo mode when the penultimate word is available in RX-buffer the controller should be disabled before reading data to prevent the next transaction triggering. The controller itself handles the last word to be correctly loaded to shift-register and then transferred to RX-buffer. The turbo mode is enabled by setting turbo_mode parameter to 1. This parameter is a part of omap2_mcspi_device_config structure which is passed through the spi_device controller_data pointer. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/omap2_mcspi: change default DMA_MIN_BYTES value to 160Roman Tereshonkov1-1/+1
The value 160 has been obtained as optimal in testing it for wl1271 which use spi for communication. In some sense this change might also influence on other spi devices connected to omap2_mcspi controller. Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: fix stop queue procedureGrzegorz Sygieda1-1/+1
This fix prevents queue being marked as "stopped", if data exists in the queue list. Signed-off-by: Grzegorz Sygieda <grzegorz.sygieda@tieto.com> Signed-off-by: Lukasz Baj <lukasz.baj@tieto.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: add support for the PL023 derivateLinus Walleij2-18/+104
This adds support for a further ST variant of the PL022 called PL023. Some differences in the control registers due to being stripped down to SPI mode only, and a new clock feedback sample delay config setting is available. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/pl022: fix up differences between ARM and ST versionsLinus Walleij2-57/+125
The PL022 SPI driver did not cleanly separate between the original unmodified ARM version and the ST Microelectronics versions. Split this more cleanly and fix some whitespace moaning from checkpatch at the same time. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/spi_mpc8xxx: Do not use map_tx_dma to unmap rx_dmaJoakim Tjernlund1-1/+1
This fixes a typo were map_tx_dma is used instead of map_rx_dma, casing the driver to unmap rx_dma when it shouldn't. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-25spi/spi_mpc8xxx: Fix QE mode Litte EndianJoakim Tjernlund1-31/+70
QE mode uses Little Endian so words > 8 bits are byte swapped. Workaround this by always enforcing wordsize 8 for words > 8 bits. Unfortunately this will not work for LSB transfers where wordsize is > 8 bits so disable these for now. Also move the different quirks into its own function to keep mpc8xxx_spi_setup_transfer() sane. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22spi/spi_mpc8xxx: fix potential memory corruption.Joakim Tjernlund1-4/+3
tx_dma/rx_dma are already set to a dummy buffer when no tx/rx buffer and t->tx_dma/t->rx_dma does not contain a dma address, but NULL. This may lead to corruption of kernel memory. Fix this by leaving tx_dma/rx_dma alone. Do not INIT_TX_RX while controller is enabled, this is bad according to the MPC8321 manual. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-16Linus 2.6.34Linus Torvalds1-1/+1
2010-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds5-81/+160
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: rtnetlink: make SR-IOV VF interface symmetric sctp: delete active ICMP proto unreachable timer when free transport tcp: fix MD5 (RFC2385) support
2010-05-16Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds4-7/+21
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Oprofile: Fix Loongson irq handler MIPS: N32: Use compat version for sys_ppoll. MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1
2010-05-16rtnetlink: make SR-IOV VF interface symmetricChris Wright2-53/+129
Now we have a set of nested attributes: IFLA_VFINFO_LIST (NESTED) IFLA_VF_INFO (NESTED) IFLA_VF_MAC IFLA_VF_VLAN IFLA_VF_TX_RATE This allows a single set to operate on multiple attributes if desired. Among other things, it means a dump can be replayed to set state. The current interface has yet to be released, so this seems like something to consider for 2.6.34. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16sctp: delete active ICMP proto unreachable timer when free transportWei Yongjun1-0/+4
transport may be free before ICMP proto unreachable timer expire, so we should delete active ICMP proto unreachable timer when transport is going away. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16tcp: fix MD5 (RFC2385) supportEric Dumazet2-28/+27
TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by: Bhaskar Dutta <bhaskie@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-15 MIPS: Oprofile: Fix Loongson irq handlerWu Zhangjin1-1/+1
The interrupt enable bit for the performance counters is in the Control Register $24, not in the counter register. loongson2_perfcount_handler(), we need to use Reported-by: Xu Hengyang <hengyang@mail.ustc.edu.cn> Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1198/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-05-15 MIPS: N32: Use compat version for sys_ppoll.Chandrakala Chavva1-1/+1
The sys_ppoll() takes struct 'struct timespec'. This is different for the N32 and N64 ABIs. Use the compat version to do the proper conversions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1210/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-05-15 MIPS FPU emulator: allow Cause bits of FCSR to be writeable by ctc1Shane McDonald2-5/+19
In the FPU emulator code of the MIPS, the Cause bits of the FCSR register are not currently writeable by the ctc1 instruction. In odd corner cases, this can cause problems. For example, a case existed where a divide-by-zero exception was generated by the FPU, and the signal handler attempted to restore the FPU registers to their state before the exception occurred. In this particular setup, writing the old value to the FCSR register would cause another divide-by-zero exception to occur immediately. The solution is to change the ctc1 instruction emulator code to allow the Cause bits of the FCSR register to be writeable. This is the behaviour of the hardware that the code is emulating. This problem was found by Shane McDonald, but the credit for the fix goes to Kevin Kissell. In Kevin's words: I submit that the bug is indeed in that ctc_op: case of the emulator. The Cause bits (17:12) are supposed to be writable by that instruction, but the CTC1 emulation won't let them be updated by the instruction. I think that actually if you just completely removed lines 387-388 [...] things would work a good deal better. At least, it would be a more accurate emulation of the architecturally defined FPU. If I wanted to be really, really pedantic (which I sometimes do), I'd also protect the reserved bits that aren't necessarily writable. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> To: anemo@mba.ocn.ne.jp To: kevink@paralogos.com To: sshtylyov@mvista.com Patchwork: http://patchwork.linux-mips.org/patch/1205/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---
2010-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds1-0/+5
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: check for read permission on src file in the clone ioctl
2010-05-15lib/btree: fix possible NULL pointer dereferencekirjanov@gmail.com1-1/+2
mempool_alloc() can return null in atomic case. Signed-off-by: Denis Kirjanov <kirjanov@gmail.com> Cc: Joern Engel <joern@logfs.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-15mmc: at91_mci: modify cache flush routinesNicolas Ferre1-1/+1
As we were using an internal dma flushing routine, this patch changes to the DMA API flush_kernel_dcache_page(). Driver is able to compile now. [akpm@linux-foundation.org: flush_kernel_dcache_page() comes before kunmap_atomic()] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-15Btrfs: check for read permission on src file in the clone ioctlDan Rosenberg1-0/+5
The existing code would have allowed you to clone a file that was only open for writing Signed-off-by: Chris Mason <chris.mason@oracle.com>
2010-05-15Merge branch 'for-linus' of ↵Linus Torvalds8-26/+49
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: JFS: Free sbi memory in error path fs/sysv: dereferencing ERR_PTR() Fix double-free in logfs Fix the regression created by "set S_DEAD on unlink()..." commit
2010-05-15Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf record: Add a fallback to the reference relocation symbol
2010-05-15JFS: Free sbi memory in error pathJan Blunck1-7/+6
I spotted the missing kfree() while removing the BKL. [akpm@linux-foundation.org: avoid multiple returns so it doesn't happen again] Signed-off-by: Jan Blunck <jblunck@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-15fs/sysv: dereferencing ERR_PTR()Dan Carpenter1-1/+1
I moved the dir_put_page() inside the if condition so we don't dereference "page", if it's an ERR_PTR(). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-15Fix double-free in logfsAl Viro1-7/+7
iput() is needed *until* we'd done successful d_alloc_root() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-15Fix the regression created by "set S_DEAD on unlink()..." commitAl Viro5-11/+35
1) i_flags simply doesn't work for mount/unlink race prevention; we may have many links to file and rm on one of those obviously shouldn't prevent bind on top of another later on. To fix it right way we need to mark _dentry_ as unsuitable for mounting upon; new flag (DCACHE_CANT_MOUNT) is protected by d_flags and i_mutex on the inode in question. Set it (with dont_mount(dentry)) in unlink/rmdir/etc., check (with cant_mount(dentry)) in places in namespace.c that used to check for S_DEAD. Setting S_DEAD is still needed in places where we used to set it (for directories getting killed), since we rely on it for readdir/rmdir race prevention. 2) rename()/mount() protection has another bogosity - we unhash the target before we'd checked that it's not a mountpoint. Fixed. 3) ancient bogosity in pivot_root() - we locked i_mutex on the right directory, but checked S_DEAD on the different (and wrong) one. Noticed and fixed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-14Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds12-35/+99
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6126/1: ARM mpcore_wdt: fix build failure and other fixes ARM: 6125/1: ARM TWD: move TWD registers to common header ARM: 6110/1: Fix Thumb-2 kernel builds when UACCESS_WITH_MEMCPY is enabled ARM: 6112/1: Use the Inner Shareable I-cache and BTB ops on ARMv7 SMP ARM: 6111/1: Implement read/write for ownership in the ARMv6 DMA cache ops ARM: 6106/1: Implement copy_to_user_page() for noMMU ARM: 6105/1: Fix the __arm_ioremap_caller() definition in nommu.c
2010-05-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, mrst: Don't blindly access extended config space
2010-05-14profile: fix stats and data leakageHugh Dickins1-1/+3
If the kernel is large or the profiling step small, /proc/profile leaks data and readprofile shows silly stats, until readprofile -r has reset the buffer: clear the prof_buffer when it is vmalloc()ed. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-14hughd: update email addressHugh Dickins1-1/+1
My old address will shut down in a couple of weeks: update the tree. Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-14x86, mrst: Don't blindly access extended config spaceH. Peter Anvin1-0/+4
Do not blindly access extended configuration space unless we actively know we're on a Moorestown platform. The fixed-size BAR capability lives in the extended configuration space, and thus is not applicable if the configuration space isn't appropriately sized. This fixes booting certain VMware configurations with CONFIG_MRST=y. Moorestown will add a fake PCI-X 266 capability to advertise the presence of extended configuration space. Reported-and-tested-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Acked-by: Jacob Pan <jacob.jun.pan@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <AANLkTiltKUa3TrKR1M51eGw8FLNoQJSLT0k0_K5X3-OJ@mail.gmail.com>
2010-05-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds4-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cacheinfo: Turn off L3 cache index disable feature in virtualized environments x86, k8: Fix build error when K8_NB is disabled x86, amd: Check X86_FEATURE_OSVW bit before accessing OSVW MSRs x86: Fix fake apicid to node mapping for numa emulation
2010-05-14x86, cacheinfo: Turn off L3 cache index disable feature in virtualized ↵Frank Arnold1-0/+4
environments When running a quest kernel on xen we get: BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x2ca/0x3df PGD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Tainted: G W 2.6.34-rc3 #1 /HVM domU RIP: 0010:[<ffffffff8142f2fb>] [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x 2ca/0x3df RSP: 0018:ffff880002203e08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000060 RDX: 0000000000000000 RSI: 0000000000000040 RDI: 0000000000000000 RBP: ffff880002203ed8 R08: 00000000000017c0 R09: ffff880002203e38 R10: ffff8800023d5d40 R11: ffffffff81a01e28 R12: ffff880187e6f5c0 R13: ffff880002203e34 R14: ffff880002203e58 R15: ffff880002203e68 FS: 0000000000000000(0000) GS:ffff880002200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000038 CR3: 0000000001a3c000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffffffff81a00000, task ffffffff81a44020) Stack: ffffffff810d7ecb ffff880002203e20 ffffffff81059140 ffff880002203e30 <0> ffffffff810d7ec9 0000000002203e40 000000000050d140 ffff880002203e70 <0> 0000000002008140 0000000000000086 ffff880040020140 ffffffff81068b8b Call Trace: <IRQ> [<ffffffff810d7ecb>] ? sync_supers_timer_fn+0x0/0x1c [<ffffffff81059140>] ? mod_timer+0x23/0x25 [<ffffffff810d7ec9>] ? arm_supers_timer+0x34/0x36 [<ffffffff81068b8b>] ? hrtimer_get_next_event+0xa7/0xc3 [<ffffffff81058e85>] ? get_next_timer_interrupt+0x19a/0x20d [<ffffffff8142fa23>] get_cpu_leaves+0x5c/0x232 [<ffffffff8106a7b1>] ? sched_clock_local+0x1c/0x82 [<ffffffff8106a9a0>] ? sched_clock_tick+0x75/0x7a [<ffffffff8107748c>] generic_smp_call_function_single_interrupt+0xae/0xd0 [<ffffffff8101f6ef>] smp_call_function_single_interrupt+0x18/0x27 [<ffffffff8100a773>] call_function_single_interrupt+0x13/0x20 <EOI> [<ffffffff8143c468>] ? notifier_call_chain+0x14/0x63 [<ffffffff810295c6>] ? native_safe_halt+0xc/0xd [<ffffffff810114eb>] ? default_idle+0x36/0x53 [<ffffffff81008c22>] cpu_idle+0xaa/0xe4 [<ffffffff81423a9a>] rest_init+0x7e/0x80 [<ffffffff81b10dd2>] start_kernel+0x40e/0x419 [<ffffffff81b102c8>] x86_64_start_reservations+0xb3/0xb7 [<ffffffff81b103c4>] x86_64_start_kernel+0xf8/0x107 Code: 14 d5 40 ff ae 81 8b 14 02 31 c0 3b 15 47 1c 8b 00 7d 0e 48 8b 05 36 1c 8b 00 48 63 d2 48 8b 04 d0 c7 85 5c ff ff ff 00 00 00 00 <8b> 70 38 48 8d 8d 5c ff ff ff 48 8b 78 10 ba c4 01 00 00 e8 eb RIP [<ffffffff8142f2fb>] cpuid4_cache_lookup_regs+0x2ca/0x3df RSP <ffff880002203e08> CR2: 0000000000000038 ---[ end trace a7919e7f17c0a726 ]--- The L3 cache index disable feature of AMD CPUs has to be disabled if the kernel is running as guest on top of a hypervisor because northbridge devices are not available to the guest. Currently, this fixes a boot crash on top of Xen. In the future this will become an issue on KVM as well. Check if northbridge devices are present and do not enable the feature if there are none. [ hpa: backported to 2.6.34 ] Signed-off-by: Frank Arnold <frank.arnold@amd.com> LKML-Reference: <1271945222-5283-3-git-send-email-bp@amd64.org> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
2010-05-14x86, k8: Fix build error when K8_NB is disabledBorislav Petkov1-0/+5
K8_NB depends on PCI and when the last is disabled (allnoconfig) we fail at the final linking stage due to missing exported num_k8_northbridges. Add a header stub for that. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> LKML-Reference: <20100503183036.GJ26107@aftab> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org>
2010-05-14Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notifyLinus Torvalds2-8/+10
* 'for-linus' of git://git.infradead.org/users/eparis/notify: inotify: don't leak user struct on inotify release inotify: race use after free/double free in inotify inode marks inotify: clean up the inotify_add_watch out path Inotify: undefined reference to `anon_inode_getfd' Manual merge to remove duplicate "select ANON_INODES" from Kconfig file
2010-05-14Merge branch 'davinci-fixes-for-linus-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: DA830: fix USB 2.0 clock entry
2010-05-14DA830: fix USB 2.0 clock entrySergei Shtylyov1-1/+1
DA8xx OHCI driver fails to load due to failing clk_get() call for the USB 2.0 clock. Arrange matching USB 2.0 clock by the clock name instead of the device. (Adding another CLK() entry for "ohci.0" device won't do -- in the future I'll also have to enable USB 2.0 clock to configure CPPI 4.1 module, in which case I won't have any device at all.) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2010-05-14inotify: don't leak user struct on inotify releasePavel Emelyanov1-0/+2
inotify_new_group() receives a get_uid-ed user_struct and saves the reference on group->inotify_data.user. The problem is that free_uid() is never called on it. Issue seem to be introduced by 63c882a0 (inotify: reimplement inotify using fsnotify) after 2.6.30. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Eric Paris <eparis@parisplace.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Eric Paris <eparis@redhat.com>
2010-05-14inotify: race use after free/double free in inotify inode marksEric Paris1-3/+6
There is a race in the inotify add/rm watch code. A task can find and remove a mark which doesn't have all of it's references. This can result in a use after free/double free situation. Task A Task B ------------ ----------- inotify_new_watch() allocate a mark (refcnt == 1) add it to the idr inotify_rm_watch() inotify_remove_from_idr() fsnotify_put_mark() refcnt hits 0, free take reference because we are on idr [at this point it is a use after free] [time goes on] refcnt may hit 0 again, double free The fix is to take the reference BEFORE the object can be found in the idr. Signed-off-by: Eric Paris <eparis@redhat.com> Cc: <stable@kernel.org>
2010-05-14inotify: clean up the inotify_add_watch out pathEric Paris1-5/+2
inotify_add_watch explictly frees the unused inode mark, but it can just use the generic code. Just do that. Signed-off-by: Eric Paris <eparis@redhat.com>
2010-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds1-1/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: vhost: fix barrier pairing
2010-05-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: mmap_min_addr check CAP_SYS_RAWIO only for write
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 11:45:31 +0000