diff options
Diffstat (limited to 'arch')
116 files changed, 1509 insertions, 3771 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index e3a82775f9da..60219bf94198 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -41,10 +41,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 076db52ff672..d5f00d7eb075 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,58 +21,22 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_MACH_OMAP_GENERIC=y -CONFIG_ARCH_OMAP2420=y -CONFIG_ARCH_OMAP2430=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_H4=y -CONFIG_MACH_OMAP_APOLLON=y -CONFIG_MACH_OMAP_2430SDP=y -CONFIG_MACH_OMAP3_BEAGLE=y -CONFIG_MACH_DEVKIT8000=y -CONFIG_MACH_OMAP_LDP=y -CONFIG_MACH_OVERO=y -CONFIG_MACH_OMAP3EVM=y -CONFIG_MACH_OMAP3517EVM=y -CONFIG_MACH_OMAP3_PANDORA=y -CONFIG_MACH_OMAP3_TOUCHBOOK=y -CONFIG_MACH_OMAP_3430SDP=y -CONFIG_MACH_NOKIA_N8X0=y -CONFIG_MACH_NOKIA_RX51=y -CONFIG_MACH_OMAP_ZOOM2=y -CONFIG_MACH_OMAP_ZOOM3=y -CONFIG_MACH_CM_T35=y -CONFIG_MACH_IGEP0020=y -CONFIG_MACH_SBC3530=y -CONFIG_MACH_OMAP_3630SDP=y -CONFIG_MACH_OMAP_4430SDP=y CONFIG_ARM_THUMBEE=y -CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -# CONFIG_LOCAL_TIMERS is not set -CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y CONFIG_BINFMT_MISC=y -CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -89,14 +53,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -107,11 +63,9 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -127,7 +81,6 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -158,19 +111,15 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_DEBUG_GPIO=y @@ -181,10 +130,6 @@ CONFIG_POWER_SUPPLY=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y -CONFIG_MENELAUS=y -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -208,7 +153,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y @@ -217,25 +161,20 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_MON=y -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -CONFIG_USB_MUSB_DEBUG=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -250,18 +189,12 @@ CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y @@ -285,12 +218,10 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 6b7403fd8f54..b4892a06442c 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -203,8 +203,6 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); #define find_first_bit(p,sz) _find_first_bit_le(p,sz) #define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) -#define WORD_BITOFF_TO_LE(x) ((x)) - #else /* * These are the big endian, atomic definitions. @@ -214,8 +212,6 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); #define find_first_bit(p,sz) _find_first_bit_be(p,sz) #define find_next_bit(p,sz,off) _find_next_bit_be(p,sz,off) -#define WORD_BITOFF_TO_LE(x) ((x) ^ 0x18) - #endif #if __LINUX_ARM_ARCH__ < 5 @@ -287,55 +283,29 @@ static inline int fls(int x) #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/lock.h> -static inline void __set_bit_le(int nr, void *addr) -{ - __set_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline void __clear_bit_le(int nr, void *addr) -{ - __clear_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int __test_and_set_bit_le(int nr, void *addr) -{ - return __test_and_set_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int test_and_set_bit_le(int nr, void *addr) -{ - return test_and_set_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int __test_and_clear_bit_le(int nr, void *addr) -{ - return __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int test_and_clear_bit_le(int nr, void *addr) -{ - return test_and_clear_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int test_bit_le(int nr, const void *addr) -{ - return test_bit(WORD_BITOFF_TO_LE(nr), addr); -} +#ifdef __ARMEB__ static inline int find_first_zero_bit_le(const void *p, unsigned size) { return _find_first_zero_bit_le(p, size); } +#define find_first_zero_bit_le find_first_zero_bit_le static inline int find_next_zero_bit_le(const void *p, int size, int offset) { return _find_next_zero_bit_le(p, size, offset); } +#define find_next_zero_bit_le find_next_zero_bit_le static inline int find_next_bit_le(const void *p, int size, int offset) { return _find_next_bit_le(p, size, offset); } +#define find_next_bit_le find_next_bit_le + +#endif + +#include <asm-generic/bitops/le.h> /* * Ext2 is defined to use little-endian byte ordering. diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b997a35830fc..19d5891c48e3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -288,6 +288,7 @@ config MACH_IGEP0030 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_IGEP0020 config MACH_SBC3530 bool "OMAP3 SBC STALKER board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 66dfbccacd25..b14807794401 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,8 +229,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ hsmmc.o -obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \ - hsmmc.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ @@ -270,3 +268,5 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o disp-$(CONFIG_OMAP2_DSS) := display.o obj-y += $(disp-m) $(disp-y) + +obj-y += common-board-devices.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 1fa6bb896f41..d54969be0a54 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -41,6 +41,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SDP2430_CS0_BASE 0x04000000 #define SECONDARY_LCD_GPIO 147 @@ -180,15 +181,6 @@ static struct twl4030_platform_data sdp2430_twldata = { .vmmc1 = &sdp2430_vmmc1, }; -static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_24XX_SYS_NIRQ, - .platform_data = &sdp2430_twldata, - }, -}; - static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2D), @@ -201,8 +193,7 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, - ARRAY_SIZE(sdp2430_i2c_boardinfo)); + omap2_pmic_init("twl4030", &sdp2430_twldata); return 0; } @@ -217,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; static struct omap_usb_config sdp2430_usb_config __initdata = { .otg = 1, #ifdef CONFIG_USB_GADGET_OMAP @@ -240,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_2430sdp_init(void) { - int ret; - omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); omap_board_config = sdp2430_config; @@ -255,14 +239,13 @@ static void __init omap_2430sdp_init(void) omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); /* Turn off secondary LCD backlight */ - ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); - if (ret == 0) - gpio_direction_output(SECONDARY_LCD_GPIO, 0); + gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, + "Secondary LCD backlight"); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 23244cd0a5b6..ae2963a98041 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -19,7 +19,6 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <linux/io.h> @@ -48,6 +47,7 @@ #include "hsmmc.h" #include "pm.h" #include "control.h" +#include "common-board-devices.h" #define CONFIG_DISABLE_HFCLK 1 @@ -59,24 +59,6 @@ #define TWL4030_MSECURE_GPIO 22 -/* FIXME: These values need to be updated based on more profiling on 3430sdp*/ -static struct cpuidle_params omap3_cpuidle_params_table[] = { - /* C1 */ - {1, 2, 2, 5}, - /* C2 */ - {1, 10, 10, 30}, - /* C3 */ - {1, 50, 50, 300}, - /* C4 */ - {1, 1500, 1800, 4000}, - /* C5 */ - {1, 2500, 7500, 12000}, - /* C6 */ - {1, 3000, 8500, 15000}, - /* C7 */ - {1, 10000, 30000, 300000}, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -123,63 +105,14 @@ static struct twl4030_keypad_data sdp3430_kp_data = { .rep = 1, }; -static int ts_gpio; /* Needed for ads7846_get_pendown_state */ - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .wakeup = true, -}; - - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info sdp3430_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, -}; - - #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static unsigned backlight_gpio; -static unsigned enable_gpio; +static struct gpio sdp3430_dss_gpios[] __initdata = { + {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, + {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, +}; + static int lcd_enabled; static int dvi_enabled; @@ -187,29 +120,11 @@ static void __init sdp3430_display_init(void) { int r; - enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; - backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; - - r = gpio_request(enable_gpio, "LCD reset"); - if (r) { - printk(KERN_ERR "failed to get LCD reset GPIO\n"); - goto err0; - } - - r = gpio_request(backlight_gpio, "LCD Backlight"); - if (r) { - printk(KERN_ERR "failed to get LCD backlight GPIO\n"); - goto err1; - } - - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + r = gpio_request_array(sdp3430_dss_gpios, + ARRAY_SIZE(sdp3430_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get LCD control GPIOs\n"); - return; -err1: - gpio_free(enable_gpio); -err0: - return; } static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) @@ -219,8 +134,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_direction_output(enable_gpio, 1); - gpio_direction_output(backlight_gpio, 1); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); lcd_enabled = 1; @@ -231,8 +146,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -360,12 +275,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev, omap2_hsmmc_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ - gpio_request(gpio + 7, "sub_lcd_en_bkl"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); /* gpio + 15 is "sub_lcd_nRST" (output) */ - gpio_request(gpio + 15, "sub_lcd_nRST"); - gpio_direction_output(gpio + 15, 0); + gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); return 0; } @@ -580,20 +493,10 @@ static struct twl4030_platform_data sdp3430_twldata = { .vpll2 = &sdp3430_vpll2, }; -static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &sdp3430_twldata, - }, -}; - static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ - omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo, - ARRAY_SIZE(sdp3430_i2c_boardinfo)); + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ @@ -872,30 +775,22 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap_3430sdp_init(void) { + int gpio_pendown; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); - omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1; - sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(sdp3430_spi_board_info, - ARRAY_SIZE(sdp3430_spi_board_info)); - ads7846_dev_init(); + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; + omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 93edd7fcf451..73fa90bb6953 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -42,6 +42,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 @@ -251,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { }, }; +static struct gpio sdp4430_eth_gpios[] __initdata = { + { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" }, + { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" }, + { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, +}; + static int omap_ethernet_init(void) { int status; /* Request of GPIO lines */ + status = gpio_request_array(sdp4430_eth_gpios, + ARRAY_SIZE(sdp4430_eth_gpios)); + if (status) + pr_err("Cannot request ETH GPIOs\n"); - status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); - return status; - } - - status = gpio_request(ETH_KS8851_QUART, "quart"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); - goto error1; - } - - status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); - goto error2; - } - - /* Configuration of requested GPIO lines */ - - status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - status = gpio_direction_output(ETH_KS8851_QUART, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); - goto error3; - } - - status = gpio_direction_input(ETH_KS8851_IRQ); - if (status) { - pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - return 0; - -error3: - gpio_free(ETH_KS8851_IRQ); -error2: - gpio_free(ETH_KS8851_QUART); -error1: - gpio_free(ETH_KS8851_POWER_ON); return status; } @@ -575,14 +540,6 @@ static struct twl4030_platform_data sdp4430_twldata = { .usb = &omap4_usbphy_data }; -static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &sdp4430_twldata, - }, -}; static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { { I2C_BOARD_INFO("tmp105", 0x48), @@ -598,12 +555,7 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { }; static int __init omap4_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, - ARRAY_SIZE(sdp4430_i2c_boardinfo)); + omap4_pmic_init("twl6030", &sdp4430_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); @@ -614,21 +566,13 @@ static int __init omap4_i2c_init(void) static void __init omap_sfh7741prox_init(void) { - int error; + int error; - error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); - if (error < 0) { + error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO, + GPIOF_OUT_INIT_LOW, "sfh7741"); + if (error < 0) pr_err("%s:failed to request GPIO %d, error %d\n", __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - return; - } - - error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); - if (error < 0) { - pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", - __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - gpio_free(OMAP4_SFH7741_ENABLE_GPIO); - } } static void sdp4430_hdmi_mux_init(void) @@ -645,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio sdp4430_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(sdp4430_hdmi_gpios, + ARRAY_SIZE(sdp4430_hdmi_gpios)); + if (status) + pr_err("%s: Cannot request HDMI GPIOs\n", __func__); return status; } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index a890d244fec6..5e438a77cd72 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -89,19 +89,13 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable"); + ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, + "usb_ehci_enable"); if (ret < 0) { pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); return; } - ret = gpio_direction_output(GPIO_USB_POWER, 1); - if (ret < 0) { - gpio_free(GPIO_USB_POWER); - pr_err("Unable to initialize EHCI power\n"); - return; - } - usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ff8c59be36e5..63af4171c043 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -174,19 +174,14 @@ static void __init am3517_evm_rtc_init(void) int r; omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq"); + + r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); if (r < 0) { printk(KERN_WARNING "failed to request GPIO#%d\n", GPIO_RTCS35390A_IRQ); return; } - r = gpio_direction_input(GPIO_RTCS35390A_IRQ); - if (r < 0) { - printk(KERN_WARNING "GPIO#%d cannot be configured as input\n", - GPIO_RTCS35390A_IRQ); - gpio_free(GPIO_RTCS35390A_IRQ); - return; - } + am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); } @@ -242,6 +237,15 @@ static int dvi_enabled; #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) +static struct gpio am3517_evm_dss_gpios[] __initdata = { + /* GPIO 182 = LCD Backlight Power */ + { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, + /* GPIO 181 = LCD Panel PWM */ + { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, + /* GPIO 176 = LCD Panel Power enable pin */ + { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init am3517_evm_display_init(void) { int r; @@ -249,41 +253,15 @@ static void __init am3517_evm_display_init(void) omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - /* - * Enable GPIO 182 = LCD Backlight Power - */ - r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr"); + + r = gpio_request_array(am3517_evm_dss_gpios, + ARRAY_SIZE(am3517_evm_dss_gpios)); if (r) { - printk(KERN_ERR "failed to get lcd_backlight_pwr\n"); + printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); return; } - gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1); - /* - * Enable GPIO 181 = LCD Panel PWM - */ - r = gpio_request(LCD_PANEL_PWM, "lcd_pwm"); - if (r) { - printk(KERN_ERR "failed to get lcd_pwm\n"); - goto err_1; - } - gpio_direction_output(LCD_PANEL_PWM, 1); - /* - * Enable GPIO 176 = LCD Panel Power enable pin - */ - r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_pwr\n"); - goto err_2; - } - gpio_direction_output(LCD_PANEL_PWR, 1); printk(KERN_INFO "Display initialized successfully\n"); - return; - -err_2: - gpio_free(LCD_PANEL_PWM); -err_1: - gpio_free(LCD_PANEL_BKLIGHT_PWR); } #else static void __init am3517_evm_display_init(void) {} @@ -396,7 +374,7 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, .set_phy_power = am35x_musb_phy_power, .clear_irq = am35x_musb_clear_irq, - .set_mode = am35x_musb_set_mode, + .set_mode = am35x_set_mode, .reset = am35x_musb_reset, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f4f8374a0298..f3beb8eeef77 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -202,6 +202,7 @@ static inline void __init apollon_init_smc91x(void) unsigned int rate; struct clk *gpmc_fck; int eth_cs; + int err; gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ if (IS_ERR(gpmc_fck)) { @@ -245,15 +246,13 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_mux_init_gpio(74, 0); - if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { + omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); + err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); + if (err) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - goto out; } - gpio_direction_input(APOLLON_ETHR_GPIO_IRQ); - out: clk_disable(gpmc_fck); clk_put(gpmc_fck); @@ -280,20 +279,19 @@ static void __init omap_apollon_init_early(void) omap2_init_common_devices(NULL, NULL); } +static struct gpio apollon_gpio_leds[] __initdata = { + { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ + { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ + { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ +}; + static void __init apollon_led_init(void) { - /* LED0 - AA10 */ omap_mux_init_signal("vlynq_clk.gpio_13", 0); - gpio_request(LED0_GPIO13, "LED0"); - gpio_direction_output(LED0_GPIO13, 0); - /* LED1 - AA6 */ omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - gpio_request(LED1_GPIO14, "LED1"); - gpio_direction_output(LED1_GPIO14, 0); - /* LED2 - AA4 */ omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - gpio_request(LED2_GPIO15, "LED2"); - gpio_direction_output(LED2_GPIO15, 0); + + gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } static void __init apollon_usb_init(void) @@ -301,8 +299,7 @@ static void __init apollon_usb_init(void) /* USB device */ /* DEVICE_SUSPEND */ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request(12, "USB suspend"); - gpio_direction_output(12, 0); + gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); omap2_usbfs_init(&apollon_usb_config); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 9340f6a06f4a..c63115bc1536 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -54,6 +54,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define CM_T35_GPIO_PENDOWN 57 @@ -66,86 +67,28 @@ #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config cm_t35_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource cm_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device cm_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(cm_t35_smsc911x_resources), - .resource = cm_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, -}; - -static struct resource sb_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, + .cs = CM_T35_SMSC911X_CS, + .gpio_irq = CM_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static struct platform_device sb_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(sb_t35_smsc911x_resources), - .resource = sb_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, + .cs = SB_T35_SMSC911X_CS, + .gpio_irq = SB_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static void __init cm_t35_init_smsc911x(struct platform_device *dev, - int cs, int irq_gpio) -{ - unsigned long cs_mem_base; - - if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) { - pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n"); - return; - } - - dev->resource[0].start = cs_mem_base + 0x0; - dev->resource[0].end = cs_mem_base + 0xff; - - if ((gpio_request(irq_gpio, "ETH IRQ") == 0) && - (gpio_direction_input(irq_gpio) == 0)) { - gpio_export(irq_gpio, 0); - } else { - pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - platform_device_register(dev); -} - static void __init cm_t35_init_ethernet(void) { - cm_t35_init_smsc911x(&cm_t35_smsc911x_device, - CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO); - cm_t35_init_smsc911x(&sb_t35_smsc911x_device, - SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); + gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } #else static inline void __init cm_t35_init_ethernet(void) { return; } @@ -235,69 +178,10 @@ static void __init cm_t35_init_nand(void) static inline void cm_t35_init_nand(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <linux/spi/ads7846.h> - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(CM_T35_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info cm_t35_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -}; - -static void __init cm_t35_init_ads7846(void) -{ - if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) { - gpio_export(CM_T35_GPIO_PENDOWN, 0); - } else { - pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - - spi_register_board_info(cm_t35_spi_board_info, - ARRAY_SIZE(cm_t35_spi_board_info)); -} -#else -static inline void cm_t35_init_ads7846(void) {} -#endif - #define CM_T35_LCD_EN_GPIO 157 #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_bl_gpio; -static int lcd_en_gpio; -static int dvi_en_gpio; - static int lcd_enabled; static int dvi_enabled; @@ -308,8 +192,8 @@ static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(lcd_en_gpio, 1); - gpio_set_value(lcd_bl_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); + gpio_set_value(CM_T35_LCD_BL_GPIO, 1); lcd_enabled = 1; @@ -320,8 +204,8 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_set_value(lcd_bl_gpio, 0); - gpio_set_value(lcd_en_gpio, 0); + gpio_set_value(CM_T35_LCD_BL_GPIO, 0); + gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -331,7 +215,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(dvi_en_gpio, 0); + gpio_set_value(CM_T35_DVI_EN_GPIO, 0); dvi_enabled = 1; return 0; @@ -339,7 +223,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(dvi_en_gpio, 1); + gpio_set_value(CM_T35_DVI_EN_GPIO, 1); dvi_enabled = 0; } @@ -421,62 +305,38 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; +static struct gpio cm_t35_dss_gpios[] __initdata = { + { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, + { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init cm_t35_init_display(void) { int err; - lcd_en_gpio = CM_T35_LCD_EN_GPIO; - lcd_bl_gpio = CM_T35_LCD_BL_GPIO; - dvi_en_gpio = CM_T35_DVI_EN_GPIO; - spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request(lcd_en_gpio, "LCD RST"); - if (err) { - pr_err("CM-T35: failed to get LCD reset GPIO\n"); - goto out; - } - - err = gpio_request(lcd_bl_gpio, "LCD BL"); + err = gpio_request_array(cm_t35_dss_gpios, + ARRAY_SIZE(cm_t35_dss_gpios)); if (err) { - pr_err("CM-T35: failed to get LCD backlight control GPIO\n"); - goto err_lcd_bl; - } - - err = gpio_request(dvi_en_gpio, "DVI EN"); - if (err) { - pr_err("CM-T35: failed to get DVI reset GPIO\n"); - goto err_dvi_en; + pr_err("CM-T35: failed to request DSS control GPIOs\n"); + return; } - gpio_export(lcd_en_gpio, 0); - gpio_export(lcd_bl_gpio, 0); - gpio_export(dvi_en_gpio, 0); - gpio_direction_output(lcd_en_gpio, 0); - gpio_direction_output(lcd_bl_gpio, 0); - gpio_direction_output(dvi_en_gpio, 1); + gpio_export(CM_T35_LCD_EN_GPIO, 0); + gpio_export(CM_T35_LCD_BL_GPIO, 0); + gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); - gpio_set_value(lcd_en_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - goto err_dev_reg; + gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); } - - return; - -err_dev_reg: - gpio_free(dvi_en_gpio); -err_dvi_en: - gpio_free(lcd_bl_gpio); -err_lcd_bl: - gpio_free(lcd_en_gpio); -out: - - return; } static struct regulator_consumer_supply cm_t35_vmmc1_supply = { @@ -609,10 +469,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, { int wlan_rst = gpio + 2; - if ((gpio_request(wlan_rst, "WLAN RST") == 0) && - (gpio_direction_output(wlan_rst, 1) == 0)) { + if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { gpio_export(wlan_rst, 0); - udelay(10); gpio_set_value(wlan_rst, 0); udelay(10); @@ -653,19 +511,9 @@ static struct twl4030_platform_data cm_t35_twldata = { .vpll2 = &cm_t35_vpll2, }; -static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &cm_t35_twldata, - }, -}; - static void __init cm_t35_init_i2c(void) { - omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo, - ARRAY_SIZE(cm_t35_i2c_boardinfo)); + omap3_pmic_init("tps65930", &cm_t35_twldata); } static void __init cm_t35_init_early(void) @@ -775,12 +623,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; @@ -792,12 +634,12 @@ static void __init cm_t35_init(void) omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); - cm_t35_init_ads7846(); + omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a27e3eee8292..08f08e812492 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -148,14 +148,13 @@ static void __init cm_t3517_init_rtc(void) { int err; - err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, + "rtc cs en"); if (err) { pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); return; } - gpio_direction_output(RTC_CS_EN_GPIO, 1); - platform_device_register(&cm_t3517_rtc_device); } #else @@ -182,11 +181,11 @@ static int cm_t3517_init_usbh(void) { int err; - err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, + "usb hub rst"); if (err) { pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); } else { - gpio_direction_output(USB_HUB_RESET_GPIO, 0); udelay(10); gpio_set_value(USB_HUB_RESET_GPIO, 1); msleep(1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1d1b56a29fb1..cf520d7dd614 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -51,7 +51,6 @@ #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/dm9000.h> #include <linux/interrupt.h> @@ -60,6 +59,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -97,13 +97,6 @@ static struct mtd_partition devkit8000_nand_partitions[] = { }, }; -static struct omap_nand_platform_data devkit8000_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = devkit8000_nand_partitions, - .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -249,7 +242,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + GPIOF_OUT_INIT_LOW, "LCD_PWREN"); if (ret < 0) { devkit8000_lcd_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); @@ -258,7 +251,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + GPIOF_OUT_INIT_LOW, "DVI PowerDown"); if (ret < 0) { devkit8000_dvi_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); @@ -366,19 +359,9 @@ static struct twl4030_platform_data devkit8000_twldata = { .keypad = &devkit8000_kp_data, }; -static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &devkit8000_twldata, - }, -}; - static int __init devkit8000_i2c_init(void) { - omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo, - ARRAY_SIZE(devkit8000_i2c_boardinfo)); + omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 400, NULL, 0); @@ -463,56 +446,6 @@ static void __init devkit8000_init_irq(void) #endif } -static void __init devkit8000_ads7846_init(void) -{ - int gpio = OMAP3_DEVKIT_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info devkit8000_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - #define OMAP_DM9000_BASE 0x2c000000 static struct resource omap_dm9000_resources[] = { @@ -550,14 +483,14 @@ static void __init omap_dm9000_init(void) { unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; struct omap_die_id odi; + int ret; - if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { + ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); + if (ret < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); return; - } - - gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + } /* init the mac address using DIE id */ omap_get_die_id(&odi); @@ -576,45 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static void __init devkit8000_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - devkit8000_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&devkit8000_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -795,14 +689,13 @@ static void __init devkit8000_init(void) ARRAY_SIZE(devkit8000_devices)); omap_display_init(&devkit8000_dss_data); - spi_register_board_info(devkit8000_spi_board_info, - ARRAY_SIZE(devkit8000_spi_board_info)); - devkit8000_ads7846_init(); + omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - devkit8000_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3da64d361651..0c1bfca3f731 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -38,6 +38,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" +#include "common-board-devices.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -54,6 +55,11 @@ #define IGEP2_RC_GPIO_WIFI_NRESET 139 #define IGEP2_RC_GPIO_BT_NRESET 137 +#define IGEP3_GPIO_LED0_GREEN 54 +#define IGEP3_GPIO_LED0_RED 53 +#define IGEP3_GPIO_LED1_RED 16 +#define IGEP3_GPIO_USBH_NRESET 183 + /* * IGEP2 Hardware Revision Table * @@ -68,6 +74,7 @@ #define IGEP2_BOARD_HWREV_B 0 #define IGEP2_BOARD_HWREV_C 1 +#define IGEP3_BOARD_HWREV 2 static u8 hwrev; @@ -75,24 +82,29 @@ static void __init igep2_get_revision(void) { u8 ret; + if (machine_is_igep0030()) { + hwrev = IGEP3_BOARD_HWREV; + return; + } + omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) && - (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) { - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - } else { + if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); pr_err("IGEP2: Unknown Hardware Revision\n"); + return; + } + + ret = gpio_get_value(IGEP2_GPIO_LED1_RED); + if (ret == 0) { + pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_C; + } else if (ret == 1) { + pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_B; + } else { + pr_err("IGEP2: Unknown Hardware Revision\n"); + hwrev = -1; } gpio_free(IGEP2_GPIO_LED1_RED); @@ -111,7 +123,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep2_onenand_partitions[] = { +static struct mtd_partition igep_onenand_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -139,21 +151,21 @@ static struct mtd_partition igep2_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep2_onenand_data = { - .parts = igep2_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep2_onenand_partitions), +static struct omap_onenand_platform_data igep_onenand_data = { + .parts = igep_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep_onenand_partitions), .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static struct platform_device igep2_onenand_device = { +static struct platform_device igep_onenand_device = { .name = "omap2-onenand", .id = -1, .dev = { - .platform_data = &igep2_onenand_data, + .platform_data = &igep_onenand_data, }, }; -static void __init igep2_flash_init(void) +static void __init igep_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -165,7 +177,7 @@ static void __init igep2_flash_init(void) /* Check if NAND/oneNAND is configured */ if ((ret & 0xC00) == 0x800) /* NAND found */ - pr_err("IGEP2: Unsupported NAND found\n"); + pr_err("IGEP: Unsupported NAND found\n"); else { ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); if ((ret & 0x3F) == (ONENAND_MAP >> 24)) @@ -175,85 +187,46 @@ static void __init igep2_flash_init(void) } if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP2: Unable to find configuration in GPMC\n"); + pr_err("IGEP: Unable to find configuration in GPMC\n"); return; } - igep2_onenand_data.cs = onenandcs; + igep_onenand_data.cs = onenandcs; - if (platform_device_register(&igep2_onenand_device) < 0) - pr_err("IGEP2: Unable to register OneNAND device\n"); + if (platform_device_register(&igep_onenand_device) < 0) + pr_err("IGEP: Unable to register OneNAND device\n"); } #else -static void __init igep2_flash_init(void) {} +static void __init igep_flash_init(void) {} #endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config igep2_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource igep2_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device igep2_smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(igep2_smsc911x_resources), - .resource = igep2_smsc911x_resources, - .dev = { - .platform_data = &igep2_smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = IGEP2_SMSC911X_CS, + .gpio_irq = IGEP2_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init igep2_init_smsc911x(void) { - unsigned long cs_mem_base; - - if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n"); - gpmc_cs_free(IGEP2_SMSC911X_CS); - return; - } - - igep2_smsc911x_resources[0].start = cs_mem_base + 0x0; - igep2_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) { - gpio_export(IGEP2_SMSC911X_GPIO, 0); - } else { - pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n"); - return; - } - - platform_device_register(&igep2_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep2_vmmc1_supply = +static struct regulator_consumer_supply igep_vmmc1_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep2_vmmc1 = { +static struct regulator_init_data igep_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, @@ -264,13 +237,13 @@ static struct regulator_init_data igep2_vmmc1 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc1_supply, + .consumer_supplies = &igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep2_vio_supply = +static struct regulator_consumer_supply igep_vio_supply = REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vio = { +static struct regulator_init_data igep_vio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, @@ -282,34 +255,34 @@ static struct regulator_init_data igep2_vio = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vio_supply, + .consumer_supplies = &igep_vio_supply, }; -static struct regulator_consumer_supply igep2_vmmc2_supply = +static struct regulator_consumer_supply igep_vmmc2_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vmmc2 = { +static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc2_supply, + .consumer_supplies = &igep_vmmc2_supply, }; -static struct fixed_voltage_config igep2_vwlan = { +static struct fixed_voltage_config igep_vwlan = { .supply_name = "vwlan", .microvolts = 3300000, .gpio = -EINVAL, .enabled_at_boot = 1, - .init_data = &igep2_vmmc2, + .init_data = &igep_vmmc2, }; -static struct platform_device igep2_vwlan_device = { +static struct platform_device igep_vwlan_device = { .name = "reg-fixed-voltage", .id = 0, .dev = { - .platform_data = &igep2_vwlan, + .platform_data = &igep_vwlan, }, }; @@ -334,20 +307,17 @@ static struct omap2_hsmmc_info mmc[] = { #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) #include <linux/leds.h> -static struct gpio_led igep2_gpio_leds[] = { +static struct gpio_led igep_gpio_leds[] = { [0] = { .name = "gpio-led:red:d0", - .gpio = IGEP2_GPIO_LED0_RED, .default_trigger = "default-off" }, [1] = { .name = "gpio-led:green:d0", - .gpio = IGEP2_GPIO_LED0_GREEN, .default_trigger = "default-off", }, [2] = { .name = "gpio-led:red:d1", - .gpio = IGEP2_GPIO_LED1_RED, .default_trigger = "default-off", }, [3] = { @@ -358,94 +328,119 @@ static struct gpio_led igep2_gpio_leds[] = { }, }; -static struct gpio_led_platform_data igep2_led_pdata = { - .leds = igep2_gpio_leds, - .num_leds = ARRAY_SIZE(igep2_gpio_leds), +static struct gpio_led_platform_data igep_led_pdata = { + .leds = igep_gpio_leds, + .num_leds = ARRAY_SIZE(igep_gpio_leds), }; -static struct platform_device igep2_led_device = { +static struct platform_device igep_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &igep2_led_pdata, + .platform_data = &igep_led_pdata, }, }; -static void __init igep2_leds_init(void) +static void __init igep_leds_init(void) { - platform_device_register(&igep2_led_device); + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } + + platform_device_register(&igep_led_device); } #else -static inline void igep2_leds_init(void) +static struct gpio igep_gpio_leds[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, +}; + +static inline void igep_leds_init(void) { - if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); + int i; - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } - if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED1_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { + pr_warning("IGEP v2: Could not obtain leds gpios\n"); + return; + } + for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) + gpio_export(igep_gpio_leds[i].gpio, 0); } #endif -static int igep2_twl_gpio_setup(struct device *dev, +static struct gpio igep2_twl_gpios[] = { + { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, +}; + +static int igep_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || - (gpio_direction_input(gpio + 1) < 0)) - pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); - - /* - * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN - * (out, active low) - */ - if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || - (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) - pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); + pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); #else - igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; + igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif + if (machine_is_igep0030()) + return 0; + + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + igep2_twl_gpios[0].gpio = gpio + 1; + + /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ + igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; + + ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); + if (ret < 0) + pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); + return 0; }; -static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = { +static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .setup = igep2_twl_gpio_setup, + .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep2_usb_data = { +static struct twl4030_usb_data igep_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -507,16 +502,17 @@ static struct regulator_init_data igep2_vpll2 = { static void __init igep2_display_init(void) { - if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") && - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) + int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, + "GPIO_DVI_PUP"); + if (err) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -static struct platform_device *igep2_devices[] __initdata = { - &igep2_vwlan_device, +static struct platform_device *igep_devices[] __initdata = { + &igep_vwlan_device, }; -static void __init igep2_init_early(void) +static void __init igep_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(m65kxxxxam_sdrc_params, @@ -561,27 +557,15 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { .rep = 1, }; -static struct twl4030_platform_data igep2_twldata = { +static struct twl4030_platform_data igep_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ - .usb = &igep2_usb_data, - .codec = &igep2_codec_data, - .gpio = &igep2_twl4030_gpio_pdata, - .keypad = &igep2_keypad_pdata, - .vmmc1 = &igep2_vmmc1, - .vpll2 = &igep2_vpll2, - .vio = &igep2_vio, -}; - -static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep2_twldata, - }, + .usb = &igep_usb_data, + .gpio = &igep_twl4030_gpio_pdata, + .vmmc1 = &igep_vmmc1, + .vio = &igep_vio, }; static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { @@ -590,32 +574,29 @@ static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { }, }; -static void __init igep2_i2c_init(void) +static void __init igep_i2c_init(void) { int ret; - ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo, - ARRAY_SIZE(igep2_i2c1_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret); + if (machine_is_igep0020()) { + /* + * Bus 3 is attached to the DVI port where devices like the + * pico DLP projector don't work reliably with 400kHz + */ + ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, + ARRAY_SIZE(igep2_i2c3_boardinfo)); + if (ret) + pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + + igep_twldata.codec = &igep2_codec_data; + igep_twldata.keypad = &igep2_keypad_pdata; + igep_twldata.vpll2 = &igep2_vpll2; + } - /* - * Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz - */ - ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, - ARRAY_SIZE(igep2_i2c3_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + omap3_pmic_init("twl4030", &igep_twldata); } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -626,6 +607,17 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL, }; +static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -633,82 +625,95 @@ static struct omap_board_mux board_mux[] __initdata = { #endif #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep_wlan_bt_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; -static void __init igep2_wlan_bt_init(void) +static void __init igep_wlan_bt_init(void) { - unsigned npd, wreset, btreset; + int err; /* GPIO's for WLAN-BT combo depends on hardware revision */ if (hwrev == IGEP2_BOARD_HWREV_B) { - npd = IGEP2_RB_GPIO_WIFI_NPD; - wreset = IGEP2_RB_GPIO_WIFI_NRESET; - btreset = IGEP2_RB_GPIO_BT_NRESET; - } else if (hwrev == IGEP2_BOARD_HWREV_C) { - npd = IGEP2_RC_GPIO_WIFI_NPD; - wreset = IGEP2_RC_GPIO_WIFI_NRESET; - btreset = IGEP2_RC_GPIO_BT_NRESET; + igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; + } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) { + igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; } else return; - /* Set GPIO's for WLAN-BT combo module */ - if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(npd, 1) == 0)) { - gpio_export(npd, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(wreset, 1) == 0)) { - gpio_export(wreset, 0); - gpio_set_value(wreset, 0); - udelay(10); - gpio_set_value(wreset, 1); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + err = gpio_request_array(igep_wlan_bt_gpios, + ARRAY_SIZE(igep_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(igep_wlan_bt_gpios[0].gpio, 0); + gpio_export(igep_wlan_bt_gpios[1].gpio, 0); + gpio_export(igep_wlan_bt_gpios[2].gpio, 0); + + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); + udelay(10); + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); - if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(btreset, 1) == 0)) { - gpio_export(btreset, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); } #else -static inline void __init igep2_wlan_bt_init(void) { } +static inline void __init igep_wlan_bt_init(void) { } #endif -static void __init igep2_init(void) +static void __init igep_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ igep2_get_revision(); /* Register I2C busses and drivers */ - igep2_i2c_init(); - platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); - omap_display_init(&igep2_dss_data); + igep_i2c_init(); + platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); + usb_musb_init(NULL); - igep2_flash_init(); - igep2_leds_init(); - igep2_display_init(); - igep2_init_smsc911x(); + igep_flash_init(); + igep_leds_init(); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ - igep2_wlan_bt_init(); + igep_wlan_bt_init(); + if (machine_is_igep0020()) { + omap_display_init(&igep2_dss_data); + igep2_display_init(); + igep2_init_smsc911x(); + usbhs_init(&igep2_usbhs_bdata); + } else { + usbhs_init(&igep3_usbhs_bdata); + } } MACHINE_START(IGEP0020, "IGEP v2 board") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = igep2_init_early, + .init_early = igep_init_early, + .init_irq = omap_init_irq, + .init_machine = igep_init, + .timer = &omap_timer, +MACHINE_END + +MACHINE_START(IGEP0030, "IGEP OMAP3 module") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = igep_init_early, .init_irq = omap_init_irq, - .init_machine = igep2_init, + .init_machine = igep_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c deleted file mode 100644 index 2cf86c3cb1a3..000000000000 --- a/arch/arm/mach-omap2/board-igep0030.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * Copyright (C) 2010 - ISEE 2007 SL - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> - -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <plat/board.h> -#include <plat/common.h> -#include <plat/gpmc.h> -#include <plat/usb.h> -#include <plat/onenand.h> - -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 - -#define IGEP3_GPIO_WIFI_NPD 138 -#define IGEP3_GPIO_WIFI_NRESET 139 -#define IGEP3_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_USBH_NRESET 183 - - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* - * x2 Flash built-in COMBO POP MEMORY - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep3_onenand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data igep3_onenand_pdata = { - .parts = igep3_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), - .onenand_setup = NULL, - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep3_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep3_onenand_pdata, - }, -}; - -static void __init igep3_flash_init(void) -{ - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP3: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* OneNAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP3: Unable to find configuration in GPMC\n"); - return; - } - - igep3_onenand_pdata.cs = onenandcs; - - if (platform_device_register(&igep3_onenand_device) < 0) - pr_err("IGEP3: Unable to register OneNAND device\n"); -} - -#else -static void __init igep3_flash_init(void) {} -#endif - -static struct regulator_consumer_supply igep3_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep3_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep3_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vio_supply, -}; - -static struct regulator_consumer_supply igep3_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc2_supply, -}; - -static struct fixed_voltage_config igep3_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep3_vmmc2, -}; - -static struct platform_device igep3_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep3_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - [0] = { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - [1] = { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep3_gpio_leds[] = { - [0] = { - .name = "gpio-led:red:d0", - .gpio = IGEP3_GPIO_LED0_RED, - .default_trigger = "default-off" - }, - [1] = { - .name = "gpio-led:green:d0", - .gpio = IGEP3_GPIO_LED0_GREEN, - .default_trigger = "default-off", - }, - [2] = { - .name = "gpio-led:red:d1", - .gpio = IGEP3_GPIO_LED1_RED, - .default_trigger = "default-off", - }, - [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", - .gpio = -EINVAL, /* gets replaced */ - }, -}; - -static struct gpio_led_platform_data igep3_led_pdata = { - .leds = igep3_gpio_leds, - .num_leds = ARRAY_SIZE(igep3_gpio_leds), -}; - -static struct platform_device igep3_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep3_led_pdata, - }, -}; - -static void __init igep3_leds_init(void) -{ - platform_device_register(&igep3_led_device); -} - -#else -static inline void igep3_leds_init(void) -{ - if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_set_value(IGEP3_GPIO_LED0_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED1_RED, 0); - gpio_set_value(IGEP3_GPIO_LED1_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); -} -#endif - -static int igep3_twl4030_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -}; - -static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .setup = igep3_twl4030_gpio_setup, -}; - -static struct twl4030_usb_data igep3_twl4030_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct platform_device *igep3_devices[] __initdata = { - &igep3_vwlan_device, -}; - -static void __init igep3_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); -} - -static struct twl4030_platform_data igep3_twl4030_pdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &igep3_twl4030_usb_data, - .gpio = &igep3_twl4030_gpio_pdata, - .vmmc1 = &igep3_vmmc1, - .vio = &igep3_vio, -}; - -static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep3_twl4030_pdata, - }, -}; - -static int __init igep3_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, - ARRAY_SIZE(igep3_i2c_boardinfo)); - - return 0; -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - -static void __init igep3_wifi_bt_init(void) -{ - /* Configure MUX values for W-LAN + Bluetooth GPIO's */ - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); - - /* Set GPIO's for W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); - - if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); -} -#else -void __init igep3_wifi_bt_init(void) {} -#endif - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init igep3_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Register I2C busses and drivers */ - igep3_i2c_init(); - platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); - omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); - - igep3_flash_init(); - igep3_leds_init(); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep3_wifi_bt_init(); - -} - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = igep3_init_early, - .init_irq = omap_init_irq, - .init_machine = igep3_init, - .timer = &omap_timer, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e2ba77957a8c..f7d6038075f0 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,7 +22,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/io.h> @@ -43,47 +42,19 @@ #include <asm/delay.h> #include <plat/usb.h> +#include <plat/gpmc-smsc911x.h> #include "board-flash.h" #include "mux.h" #include "hsmmc.h" #include "control.h" +#include "common-board-devices.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 #define DEBUG_BASE 0x08000000 #define LDP_ETHR_START DEBUG_BASE -static struct resource ldp_smsc911x_resources[] = { - [0] = { - .start = LDP_ETHR_START, - .end = LDP_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config ldp_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device ldp_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ldp_smsc911x_resources), - .resource = ldp_smsc911x_resources, - .dev = { - .platform_data = &ldp_smsc911x_config, - }, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -197,82 +168,16 @@ static struct platform_device ldp_gpio_keys_device = { }, }; -static int ts_gpio; - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ads7846 irq") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info ldp_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = LDP_SMSC911X_CS, + .gpio_irq = LDP_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; static inline void __init ldp_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = LDP_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - ldp_smsc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smsc911x_resources[0].end = cs_mem_base + 0xff; - udelay(100); - - eth_gpio = LDP_SMSC911X_GPIO; - - ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&smsc911x_cfg); } static struct platform_device ldp_lcd_device = { @@ -360,19 +265,9 @@ static struct twl4030_platform_data ldp_twldata = { .keypad = &ldp_kp_twl4030_data, }; -static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &ldp_twldata, - }, -}; - static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo, - ARRAY_SIZE(ldp_i2c_boardinfo)); + omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; @@ -389,7 +284,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, &ldp_lcd_device, &ldp_gpio_keys_device, }; @@ -400,12 +294,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct mtd_partition ldp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { @@ -446,13 +334,9 @@ static void __init omap_ldp_init(void) ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); - ts_gpio = 54; - ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(ldp_spi_board_info, - ARRAY_SIZE(ldp_spi_board_info)); - ads7846_dev_init(); + omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e710cd9e079b..8d74318ed495 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -106,14 +106,13 @@ static void __init n8x0_usb_init(void) static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; /* PM companion chip power control pin */ - ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); + ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW, + "TUSB6010 enable"); if (ret != 0) { printk(KERN_ERR "Could not get TUSB power GPIO%i\n", TUSB6010_GPIO_ENABLE); return; } - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - tusb_set_power(0); ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, @@ -494,8 +493,12 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static void __init n8x0_mmc_init(void) +static struct gpio n810_emmc_gpios[] __initdata = { + { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, + { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, +}; +static void __init n8x0_mmc_init(void) { int err; @@ -512,27 +515,18 @@ static void __init n8x0_mmc_init(void) mmc1_data.slots[1].ban_openended = 1; } - err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); + err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, + "MMC slot switch"); if (err) return; - gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); - if (machine_is_nokia_n810()) { - err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } - gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - - err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request_array(n810_emmc_gpios, + ARRAY_SIZE(n810_emmc_gpios)); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - gpio_free(N810_EMMC_VSD_GPIO); return; } - gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 97750d483a70..be71426359f2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -52,6 +52,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "pm.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -79,6 +80,12 @@ static u8 omap3_beagle_get_rev(void) return omap3_beagle_version; } +static struct gpio omap3_beagle_rev_gpios[] __initdata = { + { 171, GPIOF_IN, "rev_id_0" }, + { 172, GPIOF_IN, "rev_id_1" }, + { 173, GPIOF_IN, "rev_id_2" }, +}; + static void __init omap3_beagle_init_rev(void) { int ret; @@ -88,21 +95,13 @@ static void __init omap3_beagle_init_rev(void) omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - ret = gpio_request(171, "rev_id_0"); - if (ret < 0) - goto fail0; - - ret = gpio_request(172, "rev_id_1"); - if (ret < 0) - goto fail1; - - ret = gpio_request(173, "rev_id_2"); - if (ret < 0) - goto fail2; - - gpio_direction_input(171); - gpio_direction_input(172); - gpio_direction_input(173); + ret = gpio_request_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + if (ret < 0) { + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + return; + } beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); @@ -128,18 +127,6 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; } - - return; - -fail2: - gpio_free(172); -fail1: - gpio_free(171); -fail0: - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - - return; } static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -173,15 +160,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3beagle_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3beagle_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -243,13 +221,10 @@ static void __init beagle_display_init(void) { int r; - r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); - if (r < 0) { + r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, + "DVI reset"); + if (r < 0) printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_dvi_device.reset_gpio, 0); } #include "sdram-micron-mt46h32m32lf-6.h" @@ -276,7 +251,7 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, usb_pwr_level; if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; @@ -295,66 +270,46 @@ static int beagle_twl_gpio_setup(struct device *dev, beagle_vmmc1_supply.dev = mmc[0].dev; beagle_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "EHCI_nOC"); - if (!r) { - r = gpio_direction_input(gpio + 1); - if (r) - gpio_free(gpio + 1); - } - if (r) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) - */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - else - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); - - /* DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - beagle_dvi_device.reset_gpio = 129; - else - beagle_dvi_device.reset_gpio = 170; - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as follows: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + * DVI reset GPIO is different between beagle revisions */ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "nDVI_PWR_EN"); - if (!r) { - r = gpio_direction_output(gpio + 1, 0); - if (r) - gpio_free(gpio + 1); - } + usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_dvi_device.reset_gpio = 129; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as below: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (DVI, serial, led blocks) + */ + r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, + "nDVI_PWR_EN"); if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request(gpio + 2, "DVI_LDO_EN"); - if (!r) { - r = gpio_direction_output(gpio + 2, 1); - if (r) - gpio_free(gpio + 2); - } + r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, + "DVI_LDO_EN"); if (r) pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); + } else { + usb_pwr_level = GPIOF_OUT_INIT_LOW; + beagle_dvi_device.reset_gpio = 170; + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + return 0; } @@ -453,15 +408,6 @@ static struct twl4030_platform_data beagle_twldata = { .vpll2 = &beagle_vpll2, }; -static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &beagle_twldata, - }, -}; - static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { { I2C_BOARD_INFO("eeprom", 0x50), @@ -470,8 +416,7 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { - omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, - ARRAY_SIZE(beagle_i2c_boardinfo)); + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); @@ -551,39 +496,6 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &keys_gpio, }; -static void __init omap3beagle_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3beagle_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3beagle_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -602,12 +514,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init beagle_opp_init(void) { int r = 0; @@ -665,13 +571,13 @@ static void __init omap3_beagle_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); + gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3beagle_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 7f94cccdb076..b4d43464a303 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -50,6 +50,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -101,49 +102,20 @@ static void __init omap3_evm_get_revision(void) } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -static struct resource omap3evm_smsc911x_resources[] = { - [0] = { - .start = OMAP3EVM_ETHR_START, - .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static struct platform_device omap3evm_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources), - .resource = &omap3evm_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3EVM_SMSC911X_CS, + .gpio_irq = OMAP3EVM_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init omap3evm_init_smsc911x(void) { - int eth_cs, eth_rst; struct clk *l3ck; unsigned int rate; - if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) - eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST; - else - eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST; - - eth_cs = OMAP3EVM_SMSC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -152,33 +124,13 @@ static inline void __init omap3evm_init_smsc911x(void) /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { - if (gpio_request(eth_rst, "SMSC911x gpio") < 0) { - pr_err(KERN_ERR "Failed to request %d for smsc911x\n", - eth_rst); - return; - } - - if (gpio_direction_output(eth_rst, 1) < 0) { - pr_err(KERN_ERR "Failed to set direction of %d for" \ - " smsc911x\n", eth_rst); - return; - } - /* reset pulse to ethernet controller*/ - usleep_range(150, 220); - gpio_set_value(eth_rst, 0); - usleep_range(150, 220); - gpio_set_value(eth_rst, 1); - usleep_range(1, 2); - } - - if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - OMAP3EVM_ETHR_GPIO_IRQ); - return; + if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST; + else + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST; } - gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); - platform_device_register(&omap3evm_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -197,6 +149,15 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 +static struct gpio omap3_evm_dss_gpios[] __initdata = { + { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, + { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, + { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, + { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, + { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, + { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +}; + static int lcd_enabled; static int dvi_enabled; @@ -204,61 +165,10 @@ static void __init omap3_evm_display_init(void) { int r; - r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_resb\n"); - return; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ini\n"); - goto err_1; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_qvga\n"); - goto err_2; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0); - - r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_lr\n"); - goto err_3; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ud\n"); - goto err_4; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_envdd\n"); - goto err_5; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0); - - return; - -err_5: - gpio_free(OMAP3EVM_LCD_PANEL_UD); -err_4: - gpio_free(OMAP3EVM_LCD_PANEL_LR); -err_3: - gpio_free(OMAP3EVM_LCD_PANEL_QVGA); -err_2: - gpio_free(OMAP3EVM_LCD_PANEL_INI); -err_1: - gpio_free(OMAP3EVM_LCD_PANEL_RESB); - + r = gpio_request_array(omap3_evm_dss_gpios, + ARRAY_SIZE(omap3_evm_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); } static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) @@ -448,7 +358,7 @@ static struct platform_device leds_gpio = { static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); @@ -465,16 +375,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - if (!r) - r = gpio_direction_output(gpio + TWL4030_GPIO_MAX, - (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0); + lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL"); if (r) printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -652,78 +560,18 @@ static struct twl4030_platform_data omap3evm_twldata = { .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, -}; - -static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3evm_twldata, - }, + .vmmc1 = &omap3evm_vmmc1, + .vsim = &omap3evm_vsim, }; static int __init omap3_evm_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3evm_twldata.vmmc1 = &omap3evm_vmmc1; - omap3evm_twldata.vsim = &omap3evm_vsim; - - omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, - ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_EVM_TS_GPIO); - gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, - .wakeup = true, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3evm_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; - static struct omap_board_config_kernel omap3_evm_config[] __initdata = { }; @@ -825,6 +673,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct gpio omap3_evm_ehci_gpios[] __initdata = { + { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" }, + { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -841,9 +694,6 @@ static void __init omap3_evm_init(void) omap_display_init(&omap3_evm_dss_data); - spi_register_board_info(omap3evm_spi_board_info, - ARRAY_SIZE(omap3evm_spi_board_info)); - omap_serial_init(); /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ @@ -851,16 +701,12 @@ static void __init omap3_evm_init(void) if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); - gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); - gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); - + omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP); /* Select EHCI port on main board */ - omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); - gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); - gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); + omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT, + OMAP_PIN_INPUT_PULLUP); + gpio_request_array(omap3_evm_ehci_gpios, + ARRAY_SIZE(omap3_evm_ehci_gpios)); /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); @@ -876,7 +722,7 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index b726943d7c93..60d9be49dbab 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -37,6 +37,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #include <plat/mux.h> #include <plat/board.h> @@ -93,19 +94,9 @@ static struct twl4030_platform_data omap3logic_twldata = { .vmmc1 = &omap3logic_vmmc1, }; -static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3logic_twldata, - }, -}; - static int __init omap3logic_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, - ARRAY_SIZE(omap3logic_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3logic_twldata); return 0; } @@ -147,7 +138,6 @@ static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { .cs = OMAP3LOGIC_SMSC911X_CS, .gpio_irq = -EINVAL, .gpio_reset = -EINVAL, - .flags = IORESOURCE_IRQ_LOWLEVEL, }; /* TODO/FIXME (comment by Peter Barada, LogicPD): diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1db15492d82b..1d10736c6d3c 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/wl12xx.h> @@ -52,6 +51,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -305,24 +305,13 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; - ret = gpio_request(gpio_32khz, "wifi 32kHz"); + ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); if (ret < 0) { pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail; - } - - ret = gpio_direction_output(gpio_32khz, 1); - if (ret < 0) { - pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail_direction; + return -ENODEV; } return 0; - -fail_direction: - gpio_free(gpio_32khz); -fail: - return -ENODEV; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { @@ -544,15 +533,6 @@ static struct twl4030_platform_data omap3pandora_twldata = { .bci = &pandora_bci_data, }; -static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3pandora_twldata, - }, -}; - static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { { I2C_BOARD_INFO("bq27500", 0x55), @@ -562,61 +542,15 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, - ARRAY_SIZE(omap3pandora_i2c_boardinfo)); + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, ARRAY_SIZE(omap3pandora_i2c3_boardinfo)); return 0; } -static void __init omap3pandora_ads7846_init(void) -{ - int gpio = OMAP3_PANDORA_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_PANDORA_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), - .platform_data = &ads7846_config, - }, { .modalias = "tpo_td043mtea1_panel_spi", .bus_num = 1, .chip_select = 1, @@ -639,14 +573,10 @@ static void __init pandora_wl1251_init(void) memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq"); + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); if (ret < 0) goto fail; - ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO); - if (ret < 0) - goto fail_irq; - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); if (pandora_wl1251_pdata.irq < 0) goto fail_irq; @@ -688,12 +618,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -705,9 +629,9 @@ static void __init omap3pandora_init(void) omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); - omap3pandora_ads7846_init(); + omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a72c90a08c8a..0c108a212ea2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -45,7 +45,6 @@ #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> #include <linux/i2c/at24.h> @@ -54,52 +53,28 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include <plat/gpmc-smsc911x.h> + #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 #define OMAP3STALKER_ETHR_GPIO_IRQ 19 #define OMAP3STALKER_SMC911X_CS 5 -static struct resource omap3stalker_smsc911x_resources[] = { - [0] = { - .start = OMAP3STALKER_ETHR_START, - .end = - (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3STALKER_SMC911X_CS, + .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), }; -static struct platform_device omap3stalker_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources), - .resource = &omap3stalker_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, -}; - static inline void __init omap3stalker_init_eth(void) { - int eth_cs; struct clk *l3ck; unsigned int rate; - eth_cs = OMAP3STALKER_SMC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -107,16 +82,7 @@ static inline void __init omap3stalker_init_eth(void) rate = clk_get_rate(l3ck); omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { - printk(KERN_ERR - "Failed to request GPIO%d for smc911x IRQ\n", - OMAP3STALKER_ETHR_GPIO_IRQ); - return; - } - - gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ); - - platform_device_register(&omap3stalker_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -365,12 +331,11 @@ omap3stalker_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "EN_LCD_BKL"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -489,15 +454,8 @@ static struct twl4030_platform_data omap3stalker_twldata = { .codec = &omap3stalker_codec_data, .vdac = &omap3_stalker_vdac, .vpll2 = &omap3_stalker_vpll2, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3stalker_twldata, - }, + .vmmc1 = &omap3stalker_vmmc1, + .vsim = &omap3stalker_vsim, }; static struct at24_platform_data fram_info = { @@ -516,15 +474,7 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1; - omap3stalker_twldata.vsim = &omap3stalker_vsim; - - omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo, - ARRAY_SIZE(omap3stalker_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); @@ -532,49 +482,6 @@ static int __init omap3_stalker_i2c_init(void) } #define OMAP3_STALKER_TS_GPIO 175 -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_STALKER_TS_GPIO); - gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_STALKER_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3stalker_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; @@ -618,12 +525,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_stalker_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); @@ -636,13 +537,11 @@ static void __init omap3_stalker_init(void) ARRAY_SIZE(omap3_stalker_devices)); omap_display_init(&omap3_stalker_dss_data); - spi_register_board_info(omap3stalker_spi_board_info, - ARRAY_SIZE(omap3stalker_spi_board_info)); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 127cb1752bdd..82872d7d313b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -52,6 +52,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #include <asm/setup.h> @@ -95,15 +96,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3touchbook_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3touchbook_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -154,13 +146,11 @@ static int touchbook_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -273,15 +263,6 @@ static struct twl4030_platform_data touchbook_twldata = { .vpll2 = &touchbook_vpll2, }; -static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &touchbook_twldata, - }, -}; - static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { { I2C_BOARD_INFO("bq27200", 0x55), @@ -291,8 +272,7 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, - ARRAY_SIZE(touchbook_i2c_boardinfo)); + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, @@ -301,19 +281,7 @@ static int __init omap3_touchbook_i2c_init(void) return 0; } -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - gpio_set_debounce(OMAP3_TS_GPIO, 310); -} - -static struct ads7846_platform_data ads7846_config = { +static struct ads7846_platform_data ads7846_pdata = { .x_min = 100, .y_min = 265, .x_max = 3950, @@ -327,23 +295,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - static struct gpio_led gpio_leds[] = { { .name = "touchbook::usr0", @@ -434,39 +385,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = { &keys_gpio, }; -static void __init omap3touchbook_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3touchbook_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -481,15 +399,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static void omap3_touchbook_poweroff(void) { - int r; + int pwr_off = TB_KILL_POWER_GPIO; - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { + if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); } static int __init early_touchbook_revision(char *p) @@ -501,12 +414,6 @@ static int __init early_touchbook_revision(char *p) } early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -521,17 +428,15 @@ static void __init omap3_touchbook_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(176, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(176, true); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); /* Touchscreen and accelerometer */ - spi_register_board_info(omap3_ads7846_spi_board_info, - ARRAY_SIZE(omap3_ads7846_spi_board_info)); - omap3_ads7846_init(); - usb_musb_init(&musb_board_data); + omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3touchbook_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e4973ac77cbc..90485fced973 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -46,6 +46,7 @@ #include "hsmmc.h" #include "control.h" #include "mux.h" +#include "common-board-devices.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 @@ -111,6 +112,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct gpio panda_ehci_gpios[] __initdata = { + { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, + { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, +}; + static void __init omap4_ehci_init(void) { int ret; @@ -120,44 +126,27 @@ static void __init omap4_ehci_init(void) phy_ref_clk = clk_get(NULL, "auxclk3_ck"); if (IS_ERR(phy_ref_clk)) { pr_err("Cannot request auxclk3\n"); - goto error1; + return; } clk_set_rate(phy_ref_clk, 19200000); clk_enable(phy_ref_clk); - /* disable the power to the usb hub prior to init */ - ret = gpio_request(GPIO_HUB_POWER, "hub_power"); + /* disable the power to the usb hub prior to init and reset phy+hub */ + ret = gpio_request_array(panda_ehci_gpios, + ARRAY_SIZE(panda_ehci_gpios)); if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER); - goto error1; + pr_err("Unable to initialize EHCI power/reset\n"); + return; } - gpio_export(GPIO_HUB_POWER, 0); - gpio_direction_output(GPIO_HUB_POWER, 0); - gpio_set_value(GPIO_HUB_POWER, 0); - /* reset phy+hub */ - ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset"); - if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET); - goto error2; - } + gpio_export(GPIO_HUB_POWER, 0); gpio_export(GPIO_HUB_NRESET, 0); - gpio_direction_output(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); - return; - -error2: - gpio_free(GPIO_HUB_POWER); -error1: - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } static struct omap_musb_board_data musb_board_data = { @@ -408,15 +397,6 @@ static struct twl4030_platform_data omap4_panda_twldata = { .usb = &omap4_usbphy_data, }; -static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &omap4_panda_twldata, - }, -}; - /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM * is connected as I2C slave device, and can be accessed at address 0x50 @@ -429,12 +409,7 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = { static int __init omap4_panda_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, - ARRAY_SIZE(omap4_panda_i2c_boardinfo)); + omap4_pmic_init("twl6030", &omap4_panda_twldata); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP @@ -651,27 +626,19 @@ static void omap4_panda_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio panda_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(panda_hdmi_gpios, + ARRAY_SIZE(panda_hdmi_gpios)); + if (status) + pr_err("Cannot request HDMI GPIOs\n"); return status; } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9d192ff3b9ac..1555918e3ffa 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -56,6 +56,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 @@ -74,30 +75,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <linux/spi/ads7846.h> - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OVERO_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - /* fixed regulator for ads7846 */ static struct regulator_consumer_supply ads7846_supply = REGULATOR_SUPPLY("vcc", "spi1.0"); @@ -128,14 +105,7 @@ static struct platform_device vads7846_device = { static void __init overo_ads7846_init(void) { - if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) { - gpio_export(OVERO_GPIO_PENDOWN, 0); - } else { - printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - + omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); platform_device_register(&vads7846_device); } @@ -146,106 +116,28 @@ static inline void __init overo_ads7846_init(void) { return; } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct resource overo_smsc911x_resources[] = { - { - .name = "smsc911x-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct resource overo_smsc911x2_resources[] = { - { - .name = "smsc911x2-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config overo_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device overo_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = overo_smsc911x_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X_CS, + .gpio_irq = OVERO_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device overo_smsc911x2_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x2_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(overo_smsc911x2_resources), - .resource = overo_smsc911x2_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X2_CS, + .gpio_irq = OVERO_SMSC911X2_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device *smsc911x_devices[] = { - &overo_smsc911x_device, - &overo_smsc911x2_device, -}; - -static inline void __init overo_init_smsc911x(void) +static void __init overo_init_smsc911x(void) { - unsigned long cs_mem_base, cs_mem_base2; - - /* set up first smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); - return; - } - - overo_smsc911x_resources[0].start = cs_mem_base + 0x0; - overo_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); - overo_smsc911x_resources[1].end = 0; - - /* set up second smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n"); - return; - } - - overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0; - overo_smsc911x2_resources[0].end = cs_mem_base2 + 0xff; - - if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X2_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n"); - return; - } - - overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO); - overo_smsc911x2_resources[1].end = 0; - - platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices)); + gpmc_smsc911x_init(&smsc911x_cfg); + gpmc_smsc911x_init(&smsc911x2_cfg); } #else @@ -259,21 +151,20 @@ static int dvi_enabled; #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 +static struct gpio overo_dss_gpios[] __initdata = { + { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, + { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, +}; + static void __init overo_display_init(void) { - if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_EN, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_EN\n"); + if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { + printk(KERN_ERR "could not obtain DSS control GPIOs\n"); + return; + } - if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_BL, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_BL\n"); + gpio_export(OVERO_GPIO_LCD_EN, 0); + gpio_export(OVERO_GPIO_LCD_BL, 0); } static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -412,45 +303,6 @@ static struct mtd_partition overo_nand_partitions[] = { }, }; -static struct omap_nand_platform_data overo_nand_data = { - .parts = overo_nand_partitions, - .nr_parts = ARRAY_SIZE(overo_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - -static void __init overo_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - overo_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&overo_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -648,37 +500,15 @@ static struct twl4030_platform_data overo_twldata = { .vpll2 = &overo_vpll2, }; -static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &overo_twldata, - }, -}; - static int __init overo_i2c_init(void) { - omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo, - ARRAY_SIZE(overo_i2c_boardinfo)); + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); return 0; } static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -#endif #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { @@ -722,20 +552,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, +static struct gpio overo_bt_gpios[] __initdata = { + { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; static void __init overo_init(void) { + int ret; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); - overo_flash_init(); - usb_musb_init(&musb_board_data); + omap_nand_flash_init(0, overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions)); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_ads7846_init(); @@ -748,9 +580,9 @@ static void __init overo_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - if ((gpio_request(OVERO_GPIO_W2W_NRESET, - "OVERO_GPIO_W2W_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_W2W_NRESET"); + if (ret == 0) { gpio_export(OVERO_GPIO_W2W_NRESET, 0); gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); udelay(10); @@ -760,25 +592,20 @@ static void __init overo_init(void) "OVERO_GPIO_W2W_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); + if (ret) { + pr_err("%s: could not obtain BT gpios\n", __func__); + } else { gpio_export(OVERO_GPIO_BT_XGATE, 0); - else - printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); - - if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { gpio_export(OVERO_GPIO_BT_NRESET, 0); gpio_set_value(OVERO_GPIO_BT_NRESET, 0); mdelay(6); gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } else { - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_BT_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && - (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_USBH_CPEN"); + if (ret == 0) gpio_export(OVERO_GPIO_USBH_CPEN, 0); else printk(KERN_ERR "could not obtain gpio for " diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 2af8b05e786d..42d10b12da3c 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-nokia.h" +#include "common-board-devices.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), @@ -90,19 +91,9 @@ static struct twl4030_platform_data rm680_twl_data = { /* add rest of the children here */ }; -static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = { - { - I2C_BOARD_INFO("twl5031", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rm680_twl_data, - }, -}; - static void __init rm680_i2c_init(void) { - omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info, - ARRAY_SIZE(rm680_twl_i2c_board_info)); + omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } @@ -153,17 +144,11 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data rm680_musb_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, - .power = 100, -}; - static void __init rm680_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); - usb_musb_init(&rm680_musb_data); + usb_musb_init(NULL); rm680_peripherals_init(); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb6775a6a3..f6247e71a194 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/mmc/host.h> +#include <linux/power/isp1704_charger.h> #include <plat/mcspi.h> #include <plat/board.h> @@ -43,6 +44,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -52,6 +54,8 @@ #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_USB_TRANSCEIVER_RST_GPIO 67 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -110,10 +114,30 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { }, }; +static void rx51_charger_set_power(bool on) +{ + gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); +} + +static struct isp1704_charger_data rx51_charger_data = { + .set_power = rx51_charger_set_power, +}; + static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", + .name = "isp1704_charger", + .dev = { + .platform_data = &rx51_charger_data, + }, }; +static void __init rx51_charger_init(void) +{ + WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, + GPIOF_OUT_INIT_LOW, "isp1704_reset")); + + platform_device_register(&rx51_charger_device); +} + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #define RX51_GPIO_CAMERA_LENS_COVER 110 @@ -557,10 +581,8 @@ static __init void rx51_init_si4713(void) static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ - gpio_request(gpio + 6, "backlight_pwm"); - gpio_direction_output(gpio + 6, 0); - gpio_request(gpio + 7, "speaker_en"); - gpio_direction_output(gpio + 7, 1); + gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); return 0; } @@ -730,7 +752,7 @@ static struct twl4030_resconfig twl4030_rconfig[] __initdata = { { .resource = RES_RESET, .devgroup = -1, .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 }, - { .resource = RES_Main_Ref, .devgroup = -1, + { .resource = RES_MAIN_REF, .devgroup = -1, .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 }, { 0, 0}, @@ -777,15 +799,6 @@ static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = .power_gpio = 98, }; -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rx51_twldata, - }, -}; - /* Audio setup data */ static struct aic3x_setup_data rx51_aic34_setup = { .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, @@ -833,8 +846,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; - omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); @@ -921,26 +933,20 @@ static void rx51_wl1251_set_power(bool enable) gpio_set_value(RX51_WL1251_POWER_GPIO, enable); } +static struct gpio rx51_wl1251_gpios[] __initdata = { + { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, + { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, +}; + static void __init rx51_init_wl1251(void) { int irq, ret; - ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power"); + ret = gpio_request_array(rx51_wl1251_gpios, + ARRAY_SIZE(rx51_wl1251_gpios)); if (ret < 0) goto error; - ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0); - if (ret < 0) - goto err_power; - - ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq"); - if (ret < 0) - goto err_power; - - ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO); - if (ret < 0) - goto err_irq; - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); if (irq < 0) goto err_irq; @@ -952,10 +958,7 @@ static void __init rx51_init_wl1251(void) err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - -err_power: gpio_free(RX51_WL1251_POWER_GPIO); - error: printk(KERN_ERR "wl1251 board initialisation failed\n"); wl1251_pdata.set_power = NULL; @@ -981,6 +984,6 @@ void __init rx51_peripherals_init(void) if (partition) omap2_hsmmc_init(mmc); - platform_device_register(&rx51_charger_device); + rx51_charger_init(); } diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 2df10b6a5940..2c1289bd5e6a 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -76,13 +76,12 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "LCD ACX565AKM reset")) { pr_err("%s failed to get LCD Reset GPIO\n", __func__); return 0; } - gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f8ba20a14e62..fec4cac8fa0a 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -58,21 +58,25 @@ static struct platform_device leds_gpio = { }, }; +/* + * cpuidle C-states definition override from the default values. + * The 'exit_latency' field is the sum of sleep and wake-up latencies. + */ static struct cpuidle_params rx51_cpuidle_params[] = { /* C1 */ - {1, 110, 162, 5}, + {110 + 162, 5 , 1}, /* C2 */ - {1, 106, 180, 309}, + {106 + 180, 309, 1}, /* C3 */ - {0, 107, 410, 46057}, + {107 + 410, 46057, 0}, /* C4 */ - {0, 121, 3374, 46057}, + {121 + 3374, 46057, 0}, /* C5 */ - {1, 855, 1146, 46057}, + {855 + 1146, 46057, 1}, /* C6 */ - {0, 7580, 4134, 484329}, + {7580 + 4134, 484329, 0}, /* C7 */ - {1, 7505, 15274, 484329}, + {7505 + 15274, 484329, 1}, }; static struct omap_lcd_config rx51_lcd_config = { diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 007ebdc6c993..6402e781c458 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <plat/gpmc.h> +#include <plat/gpmc-smsc911x.h> #include <mach/board-zoom.h> @@ -26,60 +27,16 @@ #define DEBUG_BASE 0x08000000 #define ZOOM_ETHR_START DEBUG_BASE -static struct resource zoom_smsc911x_resources[] = { - [0] = { - .start = ZOOM_ETHR_START, - .end = ZOOM_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config zoom_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = { + .cs = ZOOM_SMSC911X_CS, + .gpio_irq = ZOOM_SMSC911X_GPIO, + .gpio_reset = -EINVAL, .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device zoom_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(zoom_smsc911x_resources), - .resource = zoom_smsc911x_resources, - .dev = { - .platform_data = &zoom_smsc911x_config, - }, }; static inline void __init zoom_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = ZOOM_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - zoom_smsc911x_resources[0].start = cs_mem_base + 0x0; - zoom_smsc911x_resources[0].end = cs_mem_base + 0xff; - - eth_gpio = ZOOM_SMSC911X_GPIO; - - zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&zoom_smsc911x_cfg); } static struct plat_serial8250_port serial_platform_data[] = { @@ -120,12 +77,9 @@ static inline void __init zoom_init_quaduart(void) quart_gpio = ZOOM_QUADUART_GPIO; - if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); - return; - } - gpio_direction_input(quart_gpio); } static inline int omap_zoom_debugboard_detect(void) @@ -135,12 +89,12 @@ static inline int omap_zoom_debugboard_detect(void) debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + if (gpio_request_one(debug_board_detect, GPIOF_IN, + "Zoom debug board detect") < 0) { printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } - gpio_direction_input(debug_board_detect); if (!gpio_get_value(debug_board_detect)) { ret = 0; @@ -150,7 +104,6 @@ static inline int omap_zoom_debugboard_detect(void) } static struct platform_device *zoom_devices[] __initdata = { - &zoom_smsc911x_device, &zoom_debugboard_serial_device, }; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 60e8645db59d..c7c6beb1ec24 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -21,34 +21,19 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 +static struct gpio zoom_lcd_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, + { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +}; + static void zoom_lcd_panel_init(void) { - int ret; - unsigned char lcd_panel_reset_gpio; - - lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : LCD_PANEL_RESET_GPIO_PILOT; - ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); - if (ret) { - pr_err("Failed to get LCD reset GPIO (gpio%d).\n", - lcd_panel_reset_gpio); - return; - } - gpio_direction_output(lcd_panel_reset_gpio, 1); - - ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); - if (ret) { - pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", - LCD_PANEL_QVGA_GPIO); - goto err0; - } - gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); - - return; -err0: - gpio_free(lcd_panel_reset_gpio); + if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) + pr_err("%s: Failed to get LCD GPIOs.\n", __func__); } static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8dee7549fbdf..118c6f53c5eb 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) @@ -276,13 +277,11 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); - if (ret) { + ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, + "lcd enable"); + if (ret) pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", LCD_PANEL_ENABLE_GPIO); - return ret; - } - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); return ret; } @@ -349,15 +348,6 @@ static struct twl4030_platform_data zoom_twldata = { .vdac = &zoom_vdac, }; -static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom_twldata, - }, -}; - static int __init omap_i2c_init(void) { if (machine_is_omap_zoom2()) { @@ -365,19 +355,12 @@ static int __init omap_i2c_init(void) zoom_audio_data.hs_extmute = 1; zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; } - omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, - ARRAY_SIZE(zoom_i2c_boardinfo)); + omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */ @@ -392,7 +375,7 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); platform_device_register(&omap_vwlan_device); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); enable_board_wakeup_source(); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c new file mode 100644 index 000000000000..e94903b2c65b --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -0,0 +1,163 @@ +/* + * common-board-devices.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> +#include <linux/i2c/twl.h> + +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <plat/i2c.h> +#include <plat/mcspi.h> +#include <plat/nand.h> + +#include "common-board-devices.h" + +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .gpio_pendown = -EINVAL, + .keep_vref_on = 1, +}; + +static struct spi_board_info ads7846_spi_board_info __initdata = { + .modalias = "ads7846", + .bus_num = -EINVAL, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = -EINVAL, + .platform_data = &ads7846_config, +}; + +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ + struct spi_board_info *spi_bi = &ads7846_spi_board_info; + int err; + + err = gpio_request(gpio_pendown, "TS PenDown"); + if (err) { + pr_err("Could not obtain gpio for TS PenDown: %d\n", err); + return; + } + + gpio_direction_input(gpio_pendown); + gpio_export(gpio_pendown, 0); + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + ads7846_config.gpio_pendown = gpio_pendown; + + spi_bi->bus_num = bus_num; + spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + + if (board_pdata) + spi_bi->platform_data = board_pdata; + + spi_register_board_info(&ads7846_spi_board_info, 1); +} +#else +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +static struct omap_nand_platform_data nand_data = { + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + nand_data.cs = nandcs; + nand_data.parts = parts; + nand_data.nr_parts = nr_parts; + nand_data.options = options; + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (gpmc_nand_init(&nand_data) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +#else +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ +} +#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h new file mode 100644 index 000000000000..eb80b3b0ef47 --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -0,0 +1,35 @@ +#ifndef __OMAP_COMMON_BOARD_DEVICES__ +#define __OMAP_COMMON_BOARD_DEVICES__ + +struct twl4030_platform_data; +struct mtd_partition; + +void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data); + +static inline void omap2_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); +} + +static inline void omap3_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); +} + +static inline void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); +} + +struct ads7846_platform_data; + +void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata); +void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); + +#endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1c240eff3918..4bf6e6e8b100 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,36 +36,6 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 7 -#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */ -#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */ -#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */ -#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */ -#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ -#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ - -#define OMAP3_STATE_MAX OMAP3_STATE_C7 - -#define CPUIDLE_FLAG_CHECK_BM 0x10000 /* use omap3_enter_idle_bm() */ - -struct omap3_processor_cx { - u8 valid; - u8 type; - u32 sleep_latency; - u32 wakeup_latency; - u32 mpu_state; - u32 core_state; - u32 threshold; - u32 flags; - const char *desc; -}; - -struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; -struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd, *core_pd, *per_pd; -struct powerdomain *cam_pd; - /* * The latencies/thresholds for various C states have * to be configured from the respective board files. @@ -75,27 +45,31 @@ struct powerdomain *cam_pd; */ static struct cpuidle_params cpuidle_params_table[] = { /* C1 */ - {1, 2, 2, 5}, + {2 + 2, 5, 1}, /* C2 */ - {1, 10, 10, 30}, + {10 + 10, 30, 1}, /* C3 */ - {1, 50, 50, 300}, + {50 + 50, 300, 1}, /* C4 */ - {1, 1500, 1800, 4000}, + {1500 + 1800, 4000, 1}, /* C5 */ - {1, 2500, 7500, 12000}, + {2500 + 7500, 12000, 1}, /* C6 */ - {1, 3000, 8500, 15000}, + {3000 + 8500, 15000, 1}, /* C7 */ - {1, 10000, 30000, 300000}, + {10000 + 30000, 300000, 1}, }; +#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table) -static int omap3_idle_bm_check(void) -{ - if (!omap3_can_sleep()) - return 1; - return 0; -} +/* Mach specific information to be recorded in the C-state driver_data */ +struct omap3_idle_statedata { + u32 mpu_state; + u32 core_state; + u8 valid; +}; +struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; + +struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) @@ -122,12 +96,10 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, static int omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct omap3_processor_cx *cx = cpuidle_get_statedata(state); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(state); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; - current_cx_state = *cx; - /* Used to keep track of the total time in idle */ getnstimeofday(&ts_preidle); @@ -140,7 +112,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, if (omap_irq_pending() || need_resched()) goto return_sleep_time; - if (cx->type == OMAP3_STATE_C1) { + /* Deny idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } @@ -148,7 +121,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, /* Execute ARM wfi */ omap_sram_idle(); - if (cx->type == OMAP3_STATE_C1) { + /* Re-allow idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); } @@ -164,41 +138,53 @@ return_sleep_time: } /** - * next_valid_state - Find next valid c-state + * next_valid_state - Find next valid C-state * @dev: cpuidle device - * @state: Currently selected c-state + * @state: Currently selected C-state * * If the current state is valid, it is returned back to the caller. * Else, this function searches for a lower c-state which is still - * valid (as defined in omap3_power_states[]). + * valid. + * + * A state is valid if the 'valid' field is enabled and + * if it satisfies the enable_off_mode condition. */ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, - struct cpuidle_state *curr) + struct cpuidle_state *curr) { struct cpuidle_state *next = NULL; - struct omap3_processor_cx *cx; + struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); + u32 mpu_deepest_state = PWRDM_POWER_RET; + u32 core_deepest_state = PWRDM_POWER_RET; - cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr); + if (enable_off_mode) { + mpu_deepest_state = PWRDM_POWER_OFF; + /* + * Erratum i583: valable for ES rev < Es1.2 on 3630. + * CORE OFF mode is not supported in a stable form, restrict + * instead the CORE state to RET. + */ + if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) + core_deepest_state = PWRDM_POWER_OFF; + } /* Check if current state is valid */ - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { return curr; } else { - u8 idx = OMAP3_STATE_MAX; + int idx = OMAP3_NUM_STATES - 1; - /* - * Reach the current state starting at highest C-state - */ - for (; idx >= OMAP3_STATE_C1; idx--) { + /* Reach the current state starting at highest C-state */ + for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { next = &dev->states[idx]; break; } } - /* - * Should never hit this condition. - */ + /* Should never hit this condition */ WARN_ON(next == NULL); /* @@ -206,17 +192,17 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * Start search from the next (lower) state. */ idx--; - for (; idx >= OMAP3_STATE_C1; idx--) { - struct omap3_processor_cx *cx; - + for (; idx >= 0; idx--) { cx = cpuidle_get_statedata(&dev->states[idx]); - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { next = &dev->states[idx]; break; } } /* - * C1 and C2 are always valid. + * C1 is always valid. * So, no need to check for 'next==NULL' outside this loop. */ } @@ -229,36 +215,22 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * @dev: cpuidle device * @state: The target state to be programmed * - * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This - * function checks for any pending activity and then programs the - * device to the specified or a safer state. + * This function checks for any pending activity and then programs + * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct cpuidle_state *new_state = next_valid_state(dev, state); - u32 core_next_state, per_next_state = 0, per_saved_state = 0; - u32 cam_state; - struct omap3_processor_cx *cx; + struct cpuidle_state *new_state; + u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; + struct omap3_idle_statedata *cx; int ret; - if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { - BUG_ON(!dev->safe_state); + if (!omap3_can_sleep()) { new_state = dev->safe_state; goto select_state; } - cx = cpuidle_get_statedata(state); - core_next_state = cx->core_state; - - /* - * FIXME: we currently manage device-specific idle states - * for PER and CORE in combination with CPU-specific - * idle states. This is wrong, and device-specific - * idle management needs to be separated out into - * its own code. - */ - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. @@ -270,9 +242,19 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, } /* + * FIXME: we currently manage device-specific idle states + * for PER and CORE in combination with CPU-specific + * idle states. This is wrong, and device-specific + * idle management needs to be separated out into + * its own code. + */ + + /* * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ + cx = cpuidle_get_statedata(state); + core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && (core_next_state > PWRDM_POWER_RET)) @@ -282,6 +264,8 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); + new_state = next_valid_state(dev, state); + select_state: dev->last_state = new_state; ret = omap3_enter_idle(dev, new_state); @@ -295,31 +279,6 @@ select_state: DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -/** - * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states up to and including this for mpu domain - * @core_deepest_state: Enable states up to and including this for core domain - * - * This goes through the list of states available and enables and disables the - * validity of C states based on deepest state that can be achieved for the - * variable domain - */ -void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state) -{ - int i; - - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - struct omap3_processor_cx *cx = &omap3_power_states[i]; - - if ((cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { - cx->valid = 1; - } else { - cx->valid = 0; - } - } -} - void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) { int i; @@ -327,212 +286,109 @@ void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) if (!cpuidle_board_params) return; - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cpuidle_params_table[i].valid = - cpuidle_board_params[i].valid; - cpuidle_params_table[i].sleep_latency = - cpuidle_board_params[i].sleep_latency; - cpuidle_params_table[i].wake_latency = - cpuidle_board_params[i].wake_latency; - cpuidle_params_table[i].threshold = - cpuidle_board_params[i].threshold; + for (i = 0; i < OMAP3_NUM_STATES; i++) { + cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; + cpuidle_params_table[i].exit_latency = + cpuidle_board_params[i].exit_latency; + cpuidle_params_table[i].target_residency = + cpuidle_board_params[i].target_residency; } return; } -/* omap3_init_power_states - Initialises the OMAP3 specific C states. - * - * Below is the desciption of each C state. - * C1 . MPU WFI + Core active - * C2 . MPU WFI + Core inactive - * C3 . MPU CSWR + Core inactive - * C4 . MPU OFF + Core inactive - * C5 . MPU CSWR + Core CSWR - * C6 . MPU OFF + Core CSWR - * C7 . MPU OFF + Core OFF - */ -void omap_init_power_states(void) -{ - /* C1 . MPU WFI + Core active */ - omap3_power_states[OMAP3_STATE_C1].valid = - cpuidle_params_table[OMAP3_STATE_C1].valid; - omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C1].sleep_latency; - omap3_power_states[OMAP3_STATE_C1].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C1].wake_latency; - omap3_power_states[OMAP3_STATE_C1].threshold = - cpuidle_params_table[OMAP3_STATE_C1].threshold; - omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; - omap3_power_states[OMAP3_STATE_C1].desc = "MPU ON + CORE ON"; - - /* C2 . MPU WFI + Core inactive */ - omap3_power_states[OMAP3_STATE_C2].valid = - cpuidle_params_table[OMAP3_STATE_C2].valid; - omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C2].sleep_latency; - omap3_power_states[OMAP3_STATE_C2].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C2].wake_latency; - omap3_power_states[OMAP3_STATE_C2].threshold = - cpuidle_params_table[OMAP3_STATE_C2].threshold; - omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C2].desc = "MPU ON + CORE ON"; - - /* C3 . MPU CSWR + Core inactive */ - omap3_power_states[OMAP3_STATE_C3].valid = - cpuidle_params_table[OMAP3_STATE_C3].valid; - omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C3].sleep_latency; - omap3_power_states[OMAP3_STATE_C3].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C3].wake_latency; - omap3_power_states[OMAP3_STATE_C3].threshold = - cpuidle_params_table[OMAP3_STATE_C3].threshold; - omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C3].desc = "MPU RET + CORE ON"; - - /* C4 . MPU OFF + Core inactive */ - omap3_power_states[OMAP3_STATE_C4].valid = - cpuidle_params_table[OMAP3_STATE_C4].valid; - omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C4].sleep_latency; - omap3_power_states[OMAP3_STATE_C4].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C4].wake_latency; - omap3_power_states[OMAP3_STATE_C4].threshold = - cpuidle_params_table[OMAP3_STATE_C4].threshold; - omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C4].desc = "MPU OFF + CORE ON"; - - /* C5 . MPU CSWR + Core CSWR*/ - omap3_power_states[OMAP3_STATE_C5].valid = - cpuidle_params_table[OMAP3_STATE_C5].valid; - omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C5].sleep_latency; - omap3_power_states[OMAP3_STATE_C5].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C5].wake_latency; - omap3_power_states[OMAP3_STATE_C5].threshold = - cpuidle_params_table[OMAP3_STATE_C5].threshold; - omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C5].desc = "MPU RET + CORE RET"; - - /* C6 . MPU OFF + Core CSWR */ - omap3_power_states[OMAP3_STATE_C6].valid = - cpuidle_params_table[OMAP3_STATE_C6].valid; - omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C6].sleep_latency; - omap3_power_states[OMAP3_STATE_C6].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C6].wake_latency; - omap3_power_states[OMAP3_STATE_C6].threshold = - cpuidle_params_table[OMAP3_STATE_C6].threshold; - omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C6].desc = "MPU OFF + CORE RET"; - - /* C7 . MPU OFF + Core OFF */ - omap3_power_states[OMAP3_STATE_C7].valid = - cpuidle_params_table[OMAP3_STATE_C7].valid; - omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; - omap3_power_states[OMAP3_STATE_C7].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C7].sleep_latency; - omap3_power_states[OMAP3_STATE_C7].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C7].wake_latency; - omap3_power_states[OMAP3_STATE_C7].threshold = - cpuidle_params_table[OMAP3_STATE_C7].threshold; - omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C7].desc = "MPU OFF + CORE OFF"; - - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions. - * we disable C7 state as a result. - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { - omap3_power_states[OMAP3_STATE_C7].valid = 0; - cpuidle_params_table[OMAP3_STATE_C7].valid = 0; - pr_warn("%s: core off state C7 disabled due to i583\n", - __func__); - } -} - struct cpuidle_driver omap3_idle_driver = { .name = "omap3_idle", .owner = THIS_MODULE, }; +/* Helper to fill the C-state common data and register the driver_data */ +static inline struct omap3_idle_statedata *_fill_cstate( + struct cpuidle_device *dev, + int idx, const char *descr) +{ + struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; + struct cpuidle_state *state = &dev->states[idx]; + + state->exit_latency = cpuidle_params_table[idx].exit_latency; + state->target_residency = cpuidle_params_table[idx].target_residency; + state->flags = CPUIDLE_FLAG_TIME_VALID; + state->enter = omap3_enter_idle_bm; + cx->valid = cpuidle_params_table[idx].valid; + sprintf(state->name, "C%d", idx + 1); + strncpy(state->desc, descr, CPUIDLE_DESC_LEN); + cpuidle_set_statedata(state, cx); + + return cx; +} + /** * omap3_idle_init - Init routine for OMAP3 idle * - * Registers the OMAP3 specific cpuidle driver with the cpuidle + * Registers the OMAP3 specific cpuidle driver to the cpuidle * framework with the valid set of states. */ int __init omap3_idle_init(void) { - int i, count = 0; - struct omap3_processor_cx *cx; - struct cpuidle_state *state; struct cpuidle_device *dev; + struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); - omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cx = &omap3_power_states[i]; - state = &dev->states[count]; - - if (!cx->valid) - continue; - cpuidle_set_statedata(state, cx); - state->exit_latency = cx->sleep_latency + cx->wakeup_latency; - state->target_residency = cx->threshold; - state->flags = cx->flags; - state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? - omap3_enter_idle_bm : omap3_enter_idle; - if (cx->type == OMAP3_STATE_C1) - dev->safe_state = state; - sprintf(state->name, "C%d", count+1); - strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); - count++; - } + /* C1 . MPU WFI + Core active */ + cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); + (&dev->states[0])->enter = omap3_enter_idle; + dev->safe_state = &dev->states[0]; + cx->valid = 1; /* C1 is always valid */ + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; - if (!count) - return -EINVAL; - dev->state_count = count; + /* C2 . MPU WFI + Core inactive */ + cx = _fill_cstate(dev, 1, "MPU ON + CORE ON"); + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; + + /* C3 . MPU CSWR + Core inactive */ + cx = _fill_cstate(dev, 2, "MPU RET + CORE ON"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_ON; - if (enable_off_mode) - omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF); - else - omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET); + /* C4 . MPU OFF + Core inactive */ + cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_ON; + + /* C5 . MPU RET + Core RET */ + cx = _fill_cstate(dev, 4, "MPU RET + CORE RET"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_RET; + + /* C6 . MPU OFF + Core RET */ + cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_RET; + + /* C7 . MPU OFF + Core OFF */ + cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF"); + /* + * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot + * enable OFF mode in a stable form for previous revisions. + * We disable C7 state as a result. + */ + if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { + cx->valid = 0; + pr_warn("%s: core off state C7 disabled due to i583\n", + __func__); + } + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_OFF; + dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 877c6f5807b7..ba10c24f3d8d 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -147,25 +147,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) goto free1; } - if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) goto free1; - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, + GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); if (ret) goto free2; - gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); } if (gpmc_cfg->gpio_reset) { - ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_LOW, "SMC91X reset"); if (ret) goto free3; - gpio_direction_output(gpmc_cfg->gpio_reset, 0); gpio_set_value(gpmc_cfg->gpio_reset, 1); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 0); diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 703f150dd01d..997033129d26 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -10,6 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/kernel.h> #include <linux/platform_device.h> @@ -30,7 +31,7 @@ static struct resource gpmc_smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -41,16 +42,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; -static struct platform_device gpmc_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smsc911x_resources), - .resource = gpmc_smsc911x_resources, - .dev = { - .platform_data = &gpmc_smsc911x_config, - }, -}; - /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -58,46 +49,49 @@ static struct platform_device gpmc_smsc911x_device = { */ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) { + struct platform_device *pdev; unsigned long cs_mem_base; int ret; gpmc_cfg = board_data; if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + pr_err("Failed to request GPMC mem region\n"); return; } gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - gpmc_cfg->gpio_irq); + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { + pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); goto free1; } - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - gpmc_smsc911x_resources[1].flags |= - (gpmc_cfg->flags & IRQF_TRIGGER_MASK); if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_HIGH, "smsc911x reset"); if (ret) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n", - gpmc_cfg->gpio_reset); + pr_err("Failed to request reset GPIO%d\n", + gpmc_cfg->gpio_reset); goto free2; } - gpio_direction_output(gpmc_cfg->gpio_reset, 1); gpio_set_value(gpmc_cfg->gpio_reset, 0); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (platform_device_register(&gpmc_smsc911x_device) < 0) { - printk(KERN_ERR "Unable to register smsc911x device\n"); + if (gpmc_cfg->flags) + gpmc_smsc911x_config.flags = gpmc_cfg->flags; + + pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, + gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), + &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); + if (!pdev) { + pr_err("Unable to register platform device\n"); gpio_free(gpmc_cfg->gpio_reset); goto free2; } @@ -109,5 +103,5 @@ free2: free1: gpmc_cs_free(gpmc_cfg->cs); - printk(KERN_ERR "Could not initialize smsc911x\n"); + pr_err("Could not initialize smsc911x device\n"); } diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 82632c24076f..7b9f1909ddb2 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -63,10 +63,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) char *source_name; /* Get the Type of interrupt */ - if (irq == l3->app_irq) - inttype = L3_APPLICATION_ERROR; - else - inttype = L3_DEBUG_ERROR; + inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; for (i = 0; i < L3_MODULES; i++) { /* @@ -84,10 +81,10 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) err_src = j; /* Read the stderrlog_main_source from clk domain */ - std_err_main_addr = base + (*(l3_targ[i] + err_src)); - std_err_main = readl(std_err_main_addr); + std_err_main_addr = base + *(l3_targ[i] + err_src); + std_err_main = readl(std_err_main_addr); - switch ((std_err_main & CUSTOM_ERROR)) { + switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: source_name = l3_targ_stderrlog_main_name[i][err_src]; @@ -132,49 +129,49 @@ static int __init omap4_l3_probe(struct platform_device *pdev) l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) - ret = -ENOMEM; + return -ENOMEM; platform_set_drvdata(pdev, l3); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "couldn't find resource 0\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->l3_base[0] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[0])) { + if (!l3->l3_base[0]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { dev_err(&pdev->dev, "couldn't find resource 1\n"); ret = -ENODEV; - goto err3; + goto err1; } l3->l3_base[1] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[1])) { + if (!l3->l3_base[1]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err4; + goto err1; } res = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (!res) { dev_err(&pdev->dev, "couldn't find resource 2\n"); ret = -ENODEV; - goto err5; + goto err2; } l3->l3_base[2] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[2])) { + if (!l3->l3_base[2]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err6; + goto err2; } /* @@ -187,7 +184,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_DBG); - goto err7; + goto err3; } l3->debug_irq = irq; @@ -198,24 +195,22 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_APP); - goto err8; + goto err4; } l3->app_irq = irq; - goto err0; -err8: -err7: - iounmap(l3->l3_base[2]); -err6: -err5: - iounmap(l3->l3_base[1]); + return 0; + err4: + free_irq(l3->debug_irq, l3); err3: - iounmap(l3->l3_base[0]); + iounmap(l3->l3_base[2]); err2: + iounmap(l3->l3_base[1]); err1: - kfree(l3); + iounmap(l3->l3_base[0]); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 4321e7938929..873c0e33b512 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,7 +155,7 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s Error seen by %s %s at address %x\n", + WARN(true, "%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", @@ -167,21 +167,15 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) { struct omap3_l3 *l3 = _l3; - u64 status, clear; u64 error; u64 error_addr; u64 err_source = 0; void __iomem *base; int int_type; - irqreturn_t ret = IRQ_NONE; - if (irq == l3->app_irq) - int_type = L3_APPLICATION_ERROR; - else - int_type = L3_DEBUG_ERROR; - + int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; if (!int_type) { status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0); /* @@ -202,7 +196,6 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); - if (error) { error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); @@ -210,9 +203,8 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) } /* Clear the status register */ - clear = ((L3_AGENT_STATUS_CLEAR_IA << int_type) | - (L3_AGENT_STATUS_CLEAR_TA)); - + clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) | + L3_AGENT_STATUS_CLEAR_TA; omap3_l3_writell(base, L3_AGENT_STATUS, clear); /* clear the error log register */ @@ -228,10 +220,8 @@ static int __init omap3_l3_probe(struct platform_device *pdev) int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); - if (!l3) { - ret = -ENOMEM; - goto err0; - } + if (!l3) + return -ENOMEM; platform_set_drvdata(pdev, l3); @@ -239,13 +229,13 @@ static int __init omap3_l3_probe(struct platform_device *pdev) if (!res) { dev_err(&pdev->dev, "couldn't find resource\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->rt = ioremap(res->start, resource_size(res)); - if (!(l3->rt)) { + if (!l3->rt) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } l3->debug_irq = platform_get_irq(pdev, 0); @@ -254,28 +244,26 @@ static int __init omap3_l3_probe(struct platform_device *pdev) "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); - goto err3; + goto err1; } l3->app_irq = platform_get_irq(pdev, 1); ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); - if (ret) { dev_err(&pdev->dev, "couldn't request app irq\n"); - goto err4; + goto err2; } - goto err0; + return 0; -err4: -err3: - iounmap(l3->rt); err2: + free_irq(l3->debug_irq, l3); err1: - kfree(l3); + iounmap(l3->rt); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 05f6abc96b0d..f47813edd951 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -50,13 +50,16 @@ int omap4430_phy_init(struct device *dev) { ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K); if (!ctrl_base) { - dev_err(dev, "control module ioremap failed\n"); + pr_err("control module ioremap failed\n"); return -ENOMEM; } /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); + if (!dev) + return 0; + + phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); if (IS_ERR(phyclk)) { dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n"); iounmap(ctrl_base); @@ -228,7 +231,7 @@ void am35x_musb_clear_irq(void) regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); } -void am35x_musb_set_mode(u8 musb_mode) +void am35x_set_mode(u8 musb_mode) { u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 797bfd12b643..45bcfce77352 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -36,11 +36,16 @@ static inline int omap4_opp_init(void) } #endif +/* + * cpuidle mach specific parameters + * + * The board code can override the default C-states definition using + * omap3_pm_init_cpuidle + */ struct cpuidle_params { - u8 valid; - u32 sleep_latency; - u32 wake_latency; - u32 threshold; + u32 exit_latency; /* exit_latency = sleep + wake-up latencies */ + u32 target_residency; + u8 valid; /* validates the C-state */ }; #if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) @@ -73,10 +78,6 @@ extern u32 sleep_while_idle; #define sleep_while_idle 0 #endif -#if defined(CONFIG_CPU_IDLE) -extern void omap3_cpuidle_update_states(u32, u32); -#endif - #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); extern int pm_dbg_regset_save(int reg_set); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0c5e3a46a3ad..c155c9d1c82c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -779,18 +779,6 @@ void omap3_pm_off_mode_enable(int enable) else state = PWRDM_POWER_RET; -#ifdef CONFIG_CPU_IDLE - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions, restrict - * instead to RET - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) - omap3_cpuidle_update_states(state, PWRDM_POWER_RET); - else - omap3_cpuidle_update_states(state, state); -#endif - list_for_each_entry(pwrst, &pwrst_list, node) { if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) && pwrst->pwrdm == core_pwrdm && @@ -895,8 +883,6 @@ static int __init omap3_pm_init(void) pm_errata_configure(); - printk(KERN_ERR "Power Management for TI OMAP3.\n"); - /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 76cfff2db514..59a870be8390 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -105,13 +105,11 @@ static int __init omap4_pm_init(void) pr_err("Power Management for TI OMAP4.\n"); -#ifdef CONFIG_PM ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains\n"); goto err2; } -#endif #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 13e24f913dd4..fb7dc52394a8 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -847,6 +847,14 @@ static int __init omap_sr_probe(struct platform_device *pdev) goto err_free_devinfo; } + mem = request_mem_region(mem->start, resource_size(mem), + dev_name(&pdev->dev)); + if (!mem) { + dev_err(&pdev->dev, "%s: no mem region\n", __func__); + ret = -EBUSY; + goto err_free_devinfo; + } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); @@ -883,7 +891,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - goto err_release_region; + return ret; } } @@ -896,7 +904,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); if (!vdd_dbg_dir) { ret = -EINVAL; - goto err_release_region; + goto err_iounmap; } sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); @@ -904,7 +912,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); - goto err_release_region; + goto err_iounmap; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, @@ -921,7 +929,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); ret = PTR_ERR(nvalue_dir); - goto err_release_region; + goto err_debugfs; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -931,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) "entries for n-values\n", __func__, sr_info->voltdm->name); ret = -ENODATA; - goto err_release_region; + goto err_debugfs; } for (i = 0; i < sr_info->nvalue_count; i++) { @@ -945,6 +953,11 @@ static int __init omap_sr_probe(struct platform_device *pdev) return ret; +err_debugfs: + debugfs_remove_recursive(sr_info->dbg_dir); +err_iounmap: + list_del(&sr_info->node); + iounmap(sr_info->base); err_release_region: release_mem_region(mem->start, resource_size(mem)); err_free_devinfo: diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 35559f77e2de..c7ed540d868d 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -108,7 +108,13 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) } } -void __init usb_musb_init(struct omap_musb_board_data *board_data) +static struct omap_musb_board_data musb_default_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; struct omap_device *od; @@ -116,11 +122,12 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) struct device *dev; int bus_id = -1; const char *oh_name, *name; + struct omap_musb_board_data *board_data; - if (cpu_is_omap3517() || cpu_is_omap3505()) { - } else if (cpu_is_omap44xx()) { - usb_musb_mux_init(board_data); - } + if (musb_board_data) + board_data = musb_board_data; + else + board_data = &musb_default_board_data; /* * REVISIT: This line can be removed once all the platforms using @@ -164,10 +171,15 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) dev->dma_mask = &musb_dmamask; dev->coherent_dma_mask = musb_dmamask; put_device(dev); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); } #else void __init usb_musb_init(struct omap_musb_board_data *board_data) { + if (cpu_is_omap44xx()) + omap4430_phy_init(NULL); } #endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8a3c05f3c1d6..8dd26b765b7d 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -293,12 +293,11 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, ); /* IRQ */ - status = gpio_request(irq, "TUSB6010 irq"); + status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); if (status < 0) { printk(error, 3, status); return status; } - gpio_direction_input(irq); tusb_resources[2].start = irq + IH_GPIO_BASE; /* set up memory timings ... can speed them up later */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 0c1552d9d995..9ef3789ded4b 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -148,7 +148,6 @@ static int vp_volt_debug_get(void *data, u64 *val) } vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - pr_notice("curr_vsel = %x\n", vsel); if (!vdd->pmic_info->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h index 872de0bf1e6b..ea6c9c88c725 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -14,14 +14,14 @@ #ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ struct omap_smsc911x_platform_data { + int id; int cs; int gpio_irq; int gpio_reset; u32 flags; }; -#if defined(CONFIG_SMSC911X) || \ - defined(CONFIG_SMSC911X_MODULE) +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 565d2664f5a7..ac4b60d9aa29 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,7 +129,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP1(3, sx1); /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap2evm); DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 02b96c8f6a17..17d3c939775c 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -113,7 +113,7 @@ extern int omap4430_phy_suspend(struct device *dev, int suspend); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); -extern void am35x_musb_set_mode(u8 musb_mode); +extern void am35x_set_mode(u8 musb_mode); /* * FIXME correct answer depends on hmc_mode, diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h index 72444d97f80c..b70c19bab63a 100644 --- a/arch/avr32/include/asm/bitops.h +++ b/arch/avr32/include/asm/bitops.h @@ -270,14 +270,21 @@ static inline int __fls(unsigned long word) unsigned long find_first_zero_bit(const unsigned long *addr, unsigned long size); +#define find_first_zero_bit find_first_zero_bit + unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, unsigned long offset); +#define find_next_zero_bit find_next_zero_bit + unsigned long find_first_bit(const unsigned long *addr, unsigned long size); +#define find_first_bit find_first_bit + unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset); +#define find_next_bit find_next_bit /* * ffs: find first bit set. This is defined the same way as @@ -299,6 +306,14 @@ static inline int ffs(unsigned long word) #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/lock.h> +extern unsigned long find_next_zero_bit_le(const void *addr, + unsigned long size, unsigned long offset); +#define find_next_zero_bit_le find_next_zero_bit_le + +extern unsigned long find_next_bit_le(const void *addr, + unsigned long size, unsigned long offset); +#define find_next_bit_le find_next_bit_le + #include <asm-generic/bitops/le.h> #include <asm-generic/bitops/ext2-atomic.h> diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a18180f2d007..d619b17c4413 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -47,9 +47,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_FIND_NEXT_BIT - def_bool y - config GENERIC_GPIO def_bool y diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 3ac0c72e9fee..aaf884591b07 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -108,6 +108,7 @@ static inline void arch_kgdb_breakpoint(void) #else # define CACHE_FLUSH_IS_SAFE 1 #endif +#define GDB_ADJUSTS_BREAK_OFFSET #define HW_INST_WATCHPOINT_NUM 6 #define HW_WATCHPOINT_NUM 8 #define TYPE_INST_WATCHPOINT 0 diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index 1066d63e62b5..7854d4367c15 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -102,9 +102,6 @@ struct pt_regs { /* user_mode returns true if only one bit is set in IPEND, other than the master interrupt enable. */ #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) -#define instruction_pointer(regs) ((regs)->pc) -#define user_stack_pointer(regs) ((regs)->usp) -#define profile_pc(regs) instruction_pointer(regs) extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) @@ -128,6 +125,8 @@ extern int is_user_addr_valid(struct task_struct *child, ((unsigned long)task_stack_page(task) + \ (THREAD_SIZE - sizeof(struct pt_regs))) +#include <asm-generic/ptrace.h> + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index a6d03069d0ff..b6b94a27d276 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -31,10 +31,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 064f62196745..cb884e489425 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -19,14 +19,6 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index e20322ffcaf8..091ed6192ae8 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -41,14 +41,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index e5cc56ae6ce3..38280ef4a2af 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -78,10 +78,6 @@ config HUGETLB_PAGE_SIZE_VARIABLE depends on HUGETLB_PAGE default y -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 04440cc09b40..85118dfe9bb5 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -36,7 +36,7 @@ static cycle_t itc_get_cycles(struct clocksource *cs); struct fsyscall_gtod_data_t fsyscall_gtod_data = { - .lock = SEQLOCK_UNLOCKED, + .lock = __SEQLOCK_UNLOCKED(fsyscall_gtod_data.lock), }; struct itc_jitter_data_t itc_jitter_data; diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 736b808d2291..85b44e858225 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -256,14 +256,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h index 8accc1bb0263..cf7829a61551 100644 --- a/arch/m32r/include/asm/smp.h +++ b/arch/m32r/include/asm/smp.h @@ -81,11 +81,11 @@ static __inline__ int cpu_number_map(int cpu) static __inline__ unsigned int num_booting_cpus(void) { - return cpus_weight(cpu_callout_map); + return cpumask_weight(&cpu_callout_map); } extern void smp_send_timer(void); -extern unsigned long send_IPI_mask_phys(cpumask_t, int, int); +extern unsigned long send_IPI_mask_phys(const cpumask_t*, int, int); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index fc10b39893d4..092d40a6708e 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -30,6 +30,7 @@ #include <asm/io.h> #include <asm/mmu_context.h> #include <asm/m32r.h> +#include <asm/tlbflush.h> /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /* Data structures and variables */ @@ -61,33 +62,22 @@ extern spinlock_t ipi_lock[]; /* Function Prototypes */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -void smp_send_reschedule(int); void smp_reschedule_interrupt(void); - -void smp_flush_cache_all(void); void smp_flush_cache_all_interrupt(void); -void smp_flush_tlb_all(void); static void flush_tlb_all_ipi(void *); - -void smp_flush_tlb_mm(struct mm_struct *); -void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, \ - unsigned long); -void smp_flush_tlb_page(struct vm_area_struct *, unsigned long); static void flush_tlb_others(cpumask_t, struct mm_struct *, struct vm_area_struct *, unsigned long); + void smp_invalidate_interrupt(void); -void smp_send_stop(void); static void stop_this_cpu(void *); -void smp_send_timer(void); void smp_ipi_timer_interrupt(struct pt_regs *); void smp_local_timer_interrupt(void); static void send_IPI_allbutself(int, int); static void send_IPI_mask(const struct cpumask *, int, int); -unsigned long send_IPI_mask_phys(cpumask_t, int, int); /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /* Rescheduling request Routines */ @@ -162,10 +152,10 @@ void smp_flush_cache_all(void) unsigned long *mask; preempt_disable(); - cpumask = cpu_online_map; - cpu_clear(smp_processor_id(), cpumask); + cpumask_copy(&cpumask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &cpumask); spin_lock(&flushcache_lock); - mask=cpus_addr(cpumask); + mask=cpumask_bits(&cpumask); atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask); send_IPI_mask(&cpumask, INVALIDATE_CACHE_IPI, 0); _flush_cache_copyback_all(); @@ -263,8 +253,8 @@ void smp_flush_tlb_mm(struct mm_struct *mm) preempt_disable(); cpu_id = smp_processor_id(); mmc = &mm->context[cpu_id]; - cpu_mask = *mm_cpumask(mm); - cpu_clear(cpu_id, cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(cpu_id, &cpu_mask); if (*mmc != NO_CONTEXT) { local_irq_save(flags); @@ -275,7 +265,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm) cpumask_clear_cpu(cpu_id, mm_cpumask(mm)); local_irq_restore(flags); } - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, NULL, FLUSH_ALL); preempt_enable(); @@ -333,8 +323,8 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va) preempt_disable(); cpu_id = smp_processor_id(); mmc = &mm->context[cpu_id]; - cpu_mask = *mm_cpumask(mm); - cpu_clear(cpu_id, cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(cpu_id, &cpu_mask); #ifdef DEBUG_SMP if (!mm) @@ -348,7 +338,7 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va) __flush_tlb_page(va); local_irq_restore(flags); } - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, vma, va); preempt_enable(); @@ -395,14 +385,14 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, * - current CPU must not be in mask * - mask must exist :) */ - BUG_ON(cpus_empty(cpumask)); + BUG_ON(cpumask_empty(&cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + BUG_ON(cpumask_test_cpu(smp_processor_id(), &cpumask)); BUG_ON(!mm); /* If a CPU which we ran on has gone down, OK. */ - cpus_and(cpumask, cpumask, cpu_online_map); - if (cpus_empty(cpumask)) + cpumask_and(&cpumask, &cpumask, cpu_online_mask); + if (cpumask_empty(&cpumask)) return; /* @@ -416,7 +406,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, flush_mm = mm; flush_vma = vma; flush_va = va; - mask=cpus_addr(cpumask); + mask=cpumask_bits(&cpumask); atomic_set_mask(*mask, (atomic_t *)&flush_cpumask); /* @@ -425,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, */ send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0); - while (!cpus_empty(flush_cpumask)) { + while (!cpumask_empty((cpumask_t*)&flush_cpumask)) { /* nothing. lockup detection does not belong here */ mb(); } @@ -460,7 +450,7 @@ void smp_invalidate_interrupt(void) int cpu_id = smp_processor_id(); unsigned long *mmc = &flush_mm->context[cpu_id]; - if (!cpu_isset(cpu_id, flush_cpumask)) + if (!cpumask_test_cpu(cpu_id, &flush_cpumask)) return; if (flush_va == FLUSH_ALL) { @@ -478,7 +468,7 @@ void smp_invalidate_interrupt(void) __flush_tlb_page(va); } } - cpu_clear(cpu_id, flush_cpumask); + cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask); } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ @@ -530,7 +520,7 @@ static void stop_this_cpu(void *dummy) /* * Remove this CPU: */ - cpu_clear(cpu_id, cpu_online_map); + set_cpu_online(cpu_id, false); /* * PSW IE = 1; @@ -725,8 +715,8 @@ static void send_IPI_allbutself(int ipi_num, int try) { cpumask_t cpumask; - cpumask = cpu_online_map; - cpu_clear(smp_processor_id(), cpumask); + cpumask_copy(&cpumask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &cpumask); send_IPI_mask(&cpumask, ipi_num, try); } @@ -763,13 +753,13 @@ static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try) cpumask_and(&tmp, cpumask, cpu_online_mask); BUG_ON(!cpumask_equal(cpumask, &tmp)); - physid_mask = CPU_MASK_NONE; + cpumask_clear(&physid_mask); for_each_cpu(cpu_id, cpumask) { if ((phys_id = cpu_to_physid(cpu_id)) != -1) - cpu_set(phys_id, physid_mask); + cpumask_set_cpu(phys_id, &physid_mask); } - send_IPI_mask_phys(physid_mask, ipi_num, try); + send_IPI_mask_phys(&physid_mask, ipi_num, try); } /*==========================================================================* @@ -792,14 +782,14 @@ static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try) * ---------- --- -------------------------------------------------------- * *==========================================================================*/ -unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, +unsigned long send_IPI_mask_phys(const cpumask_t *physid_mask, int ipi_num, int try) { spinlock_t *ipilock; volatile unsigned long *ipicr_addr; unsigned long ipicr_val; unsigned long my_physid_mask; - unsigned long mask = cpus_addr(physid_mask)[0]; + unsigned long mask = cpumask_bits(physid_mask)[0]; if (mask & ~physids_coerce(phys_cpu_present_map)) diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index e034844cfc0d..cfdbe5d15002 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -135,9 +135,9 @@ void __devinit smp_prepare_boot_cpu(void) { bsp_phys_id = hard_smp_processor_id(); physid_set(bsp_phys_id, phys_cpu_present_map); - cpu_set(0, cpu_online_map); /* BSP's cpu_id == 0 */ - cpu_set(0, cpu_callout_map); - cpu_set(0, cpu_callin_map); + set_cpu_online(0, true); /* BSP's cpu_id == 0 */ + cpumask_set_cpu(0, &cpu_callout_map); + cpumask_set_cpu(0, &cpu_callin_map); /* * Initialize the logical to physical CPU number mapping @@ -178,7 +178,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++) physid_set(phys_id, phys_cpu_present_map); #ifndef CONFIG_HOTPLUG_CPU - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); #endif show_mp_info(nr_cpu); @@ -294,10 +294,10 @@ static void __init do_boot_cpu(int phys_id) send_status = 0; boot_status = 0; - cpu_set(phys_id, cpu_bootout_map); + cpumask_set_cpu(phys_id, &cpu_bootout_map); /* Send Startup IPI */ - send_IPI_mask_phys(cpumask_of_cpu(phys_id), CPU_BOOT_IPI, 0); + send_IPI_mask_phys(cpumask_of(phys_id), CPU_BOOT_IPI, 0); Dprintk("Waiting for send to finish...\n"); timeout = 0; @@ -306,7 +306,7 @@ static void __init do_boot_cpu(int phys_id) do { Dprintk("+"); udelay(1000); - send_status = !cpu_isset(phys_id, cpu_bootin_map); + send_status = !cpumask_test_cpu(phys_id, &cpu_bootin_map); } while (send_status && (timeout++ < 100)); Dprintk("After Startup.\n"); @@ -316,19 +316,19 @@ static void __init do_boot_cpu(int phys_id) * allow APs to start initializing. */ Dprintk("Before Callout %d.\n", cpu_id); - cpu_set(cpu_id, cpu_callout_map); + cpumask_set_cpu(cpu_id, &cpu_callout_map); Dprintk("After Callout %d.\n", cpu_id); /* * Wait 5s total for a response */ for (timeout = 0; timeout < 5000; timeout++) { - if (cpu_isset(cpu_id, cpu_callin_map)) + if (cpumask_test_cpu(cpu_id, &cpu_callin_map)) break; /* It has booted */ udelay(1000); } - if (cpu_isset(cpu_id, cpu_callin_map)) { + if (cpumask_test_cpu(cpu_id, &cpu_callin_map)) { /* number CPUs logically, starting from 1 (BSP is 0) */ Dprintk("OK.\n"); } else { @@ -340,9 +340,9 @@ static void __init do_boot_cpu(int phys_id) if (send_status || boot_status) { unmap_cpu_to_physid(cpu_id, phys_id); - cpu_clear(cpu_id, cpu_callout_map); - cpu_clear(cpu_id, cpu_callin_map); - cpu_clear(cpu_id, cpu_initialized); + cpumask_clear_cpu(cpu_id, &cpu_callout_map); + cpumask_clear_cpu(cpu_id, &cpu_callin_map); + cpumask_clear_cpu(cpu_id, &cpu_initialized); cpucount--; } } @@ -351,17 +351,17 @@ int __cpuinit __cpu_up(unsigned int cpu_id) { int timeout; - cpu_set(cpu_id, smp_commenced_mask); + cpumask_set_cpu(cpu_id, &smp_commenced_mask); /* * Wait 5s total for a response */ for (timeout = 0; timeout < 5000; timeout++) { - if (cpu_isset(cpu_id, cpu_online_map)) + if (cpu_online(cpu_id)) break; udelay(1000); } - if (!cpu_isset(cpu_id, cpu_online_map)) + if (!cpu_online(cpu_id)) BUG(); return 0; @@ -373,11 +373,11 @@ void __init smp_cpus_done(unsigned int max_cpus) unsigned long bogosum = 0; for (timeout = 0; timeout < 5000; timeout++) { - if (cpus_equal(cpu_callin_map, cpu_online_map)) + if (cpumask_equal(&cpu_callin_map, cpu_online_mask)) break; udelay(1000); } - if (!cpus_equal(cpu_callin_map, cpu_online_map)) + if (!cpumask_equal(&cpu_callin_map, cpu_online_mask)) BUG(); for (cpu_id = 0 ; cpu_id < num_online_cpus() ; cpu_id++) @@ -388,7 +388,7 @@ void __init smp_cpus_done(unsigned int max_cpus) */ Dprintk("Before bogomips.\n"); if (cpucount) { - for_each_cpu_mask(cpu_id, cpu_online_map) + for_each_cpu(cpu_id,cpu_online_mask) bogosum += cpu_data[cpu_id].loops_per_jiffy; printk(KERN_INFO "Total of %d processors activated " \ @@ -425,7 +425,7 @@ int __init start_secondary(void *unused) cpu_init(); preempt_disable(); smp_callin(); - while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask)) cpu_relax(); smp_online(); @@ -463,7 +463,7 @@ static void __init smp_callin(void) int cpu_id = smp_processor_id(); unsigned long timeout; - if (cpu_isset(cpu_id, cpu_callin_map)) { + if (cpumask_test_cpu(cpu_id, &cpu_callin_map)) { printk("huh, phys CPU#%d, CPU#%d already present??\n", phys_id, cpu_id); BUG(); @@ -474,7 +474,7 @@ static void __init smp_callin(void) timeout = jiffies + (2 * HZ); while (time_before(jiffies, timeout)) { /* Has the boot CPU finished it's STARTUP sequence ? */ - if (cpu_isset(cpu_id, cpu_callout_map)) + if (cpumask_test_cpu(cpu_id, &cpu_callout_map)) break; cpu_relax(); } @@ -486,7 +486,7 @@ static void __init smp_callin(void) } /* Allow the master to continue. */ - cpu_set(cpu_id, cpu_callin_map); + cpumask_set_cpu(cpu_id, &cpu_callin_map); } static void __init smp_online(void) @@ -503,7 +503,7 @@ static void __init smp_online(void) /* Save our processor parameters */ smp_store_cpu_info(cpu_id); - cpu_set(cpu_id, cpu_online_map); + set_cpu_online(cpu_id, true); } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.nommu index 273bccab9517..fc98f9b9d4d2 100644 --- a/arch/m68k/Kconfig.nommu +++ b/arch/m68k/Kconfig.nommu @@ -2,10 +2,6 @@ config FPU bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_GPIO bool default n diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h index e9020f88a748..89cf5b814a4d 100644 --- a/arch/m68k/include/asm/bitops_mm.h +++ b/arch/m68k/include/asm/bitops_mm.h @@ -200,6 +200,7 @@ out: res += ((long)p - (long)vaddr - 4) * 8; return res < size ? res : size; } +#define find_first_zero_bit find_first_zero_bit static inline int find_next_zero_bit(const unsigned long *vaddr, int size, int offset) @@ -229,6 +230,7 @@ static inline int find_next_zero_bit(const unsigned long *vaddr, int size, /* No zero yet, search remaining full bytes for a zero */ return offset + find_first_zero_bit(p, size - offset); } +#define find_next_zero_bit find_next_zero_bit static inline int find_first_bit(const unsigned long *vaddr, unsigned size) { @@ -253,6 +255,7 @@ out: res += ((long)p - (long)vaddr - 4) * 8; return res < size ? res : size; } +#define find_first_bit find_first_bit static inline int find_next_bit(const unsigned long *vaddr, int size, int offset) @@ -282,6 +285,7 @@ static inline int find_next_bit(const unsigned long *vaddr, int size, /* No one yet, search remaining full bytes for a one */ return offset + find_first_bit(p, size - offset); } +#define find_next_bit find_next_bit /* * ffz = Find First Zero in word. Undefined if no zero exists, @@ -398,6 +402,7 @@ out: res += (p - addr) * 32; return res < size ? res : size; } +#define find_first_zero_bit_le find_first_zero_bit_le static inline unsigned long find_next_zero_bit_le(const void *addr, unsigned long size, unsigned long offset) @@ -427,6 +432,7 @@ static inline unsigned long find_next_zero_bit_le(const void *addr, /* No zero yet, search remaining full bytes for a zero */ return offset + find_first_zero_bit_le(p, size - offset); } +#define find_next_zero_bit_le find_next_zero_bit_le static inline int find_first_bit_le(const void *vaddr, unsigned size) { @@ -451,6 +457,7 @@ out: res += (p - addr) * 32; return res < size ? res : size; } +#define find_first_bit_le find_first_bit_le static inline unsigned long find_next_bit_le(const void *addr, unsigned long size, unsigned long offset) @@ -480,6 +487,7 @@ static inline unsigned long find_next_bit_le(const void *addr, /* No set bit yet, search remaining full bytes for a set bit */ return offset + find_first_bit_le(p, size - offset); } +#define find_next_bit_le find_next_bit_le /* Bitmap functions for the ext2 filesystem. */ diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h index 6b0e2d349f0e..72e85acdd7bd 100644 --- a/arch/m68k/include/asm/bitops_no.h +++ b/arch/m68k/include/asm/bitops_no.h @@ -319,6 +319,10 @@ found_first: found_middle: return result + ffz(__swab32(tmp)); } +#define find_next_zero_bit_le find_next_zero_bit_le + +extern unsigned long find_next_bit_le(const void *addr, + unsigned long size, unsigned long offset); #endif /* __KERNEL__ */ diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index eccdefe70d4e..e446bab2427b 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -33,12 +33,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n -config GENERIC_FIND_NEXT_BIT - def_bool y - -config GENERIC_FIND_BIT_LE - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cef1a854487d..653da62d0682 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -821,14 +821,6 @@ config ARCH_SUPPORTS_OPROFILE bool default y if !MIPS_MT_SMTC -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 22fdf2f0cc23..ad15fb10322b 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -16,7 +16,6 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_TINY_RCU=y CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_CPUACCT=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index feaf09cc8632..1f870340ebdd 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -44,9 +44,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_CMOS_UPDATE def_bool n -config GENERIC_FIND_NEXT_BIT - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/mn10300/configs/asb2364_defconfig b/arch/mn10300/configs/asb2364_defconfig index 31d76261a3d5..fbb96ae3122a 100644 --- a/arch/mn10300/configs/asb2364_defconfig +++ b/arch/mn10300/configs/asb2364_defconfig @@ -8,7 +8,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 69ff049c8571..65adc86a230e 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,14 +47,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_BUG bool default y diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2f6a22e8e935..2729c6663d8a 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -91,14 +91,6 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_GPIO bool help diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 214208924a9c..04360f9b0109 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -10,7 +10,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 7de13865508c..c9f212b5f3de 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -15,7 +15,6 @@ CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h index e1c8f3a49884..667c6e9f6a34 100644 --- a/arch/s390/include/asm/bitops.h +++ b/arch/s390/include/asm/bitops.h @@ -621,6 +621,7 @@ static inline unsigned long find_first_zero_bit(const unsigned long *addr, bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes)); return (bits < size) ? bits : size; } +#define find_first_zero_bit find_first_zero_bit /** * find_first_bit - find the first set bit in a memory region @@ -641,6 +642,7 @@ static inline unsigned long find_first_bit(const unsigned long * addr, bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes)); return (bits < size) ? bits : size; } +#define find_first_bit find_first_bit /** * find_next_zero_bit - find the first zero bit in a memory region @@ -677,6 +679,7 @@ static inline int find_next_zero_bit (const unsigned long * addr, } return offset + find_first_zero_bit(p, size); } +#define find_next_zero_bit find_next_zero_bit /** * find_next_bit - find the first set bit in a memory region @@ -713,6 +716,7 @@ static inline int find_next_bit (const unsigned long * addr, } return offset + find_first_bit(p, size); } +#define find_next_bit find_next_bit /* * Every architecture must define this function. It's the fastest @@ -742,41 +746,6 @@ static inline int sched_find_first_bit(unsigned long *b) * 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 */ -static inline void __set_bit_le(unsigned long nr, void *addr) -{ - __set_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline void __clear_bit_le(unsigned long nr, void *addr) -{ - __clear_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int __test_and_set_bit_le(unsigned long nr, void *addr) -{ - return __test_and_set_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int test_and_set_bit_le(unsigned long nr, void *addr) -{ - return test_and_set_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int __test_and_clear_bit_le(unsigned long nr, void *addr) -{ - return __test_and_clear_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int test_and_clear_bit_le(unsigned long nr, void *addr) -{ - return test_and_clear_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int test_bit_le(unsigned long nr, const void *addr) -{ - return test_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - static inline int find_first_zero_bit_le(void *vaddr, unsigned int size) { unsigned long bytes, bits; @@ -787,6 +756,7 @@ static inline int find_first_zero_bit_le(void *vaddr, unsigned int size) bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes)); return (bits < size) ? bits : size; } +#define find_first_zero_bit_le find_first_zero_bit_le static inline int find_next_zero_bit_le(void *vaddr, unsigned long size, unsigned long offset) @@ -816,6 +786,7 @@ static inline int find_next_zero_bit_le(void *vaddr, unsigned long size, } return offset + find_first_zero_bit_le(p, size); } +#define find_next_zero_bit_le find_next_zero_bit_le static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size) { @@ -827,6 +798,7 @@ static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size) bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes)); return (bits < size) ? bits : size; } +#define find_first_bit_le find_first_bit_le static inline int find_next_bit_le(void *vaddr, unsigned long size, unsigned long offset) @@ -856,6 +828,9 @@ static inline int find_next_bit_le(void *vaddr, unsigned long size, } return offset + find_first_bit_le(p, size); } +#define find_next_bit_le find_next_bit_le + +#include <asm-generic/bitops/le.h> #define ext2_set_bit_atomic(lock, nr, addr) \ test_and_set_bit_le(nr, addr) diff --git a/arch/score/Kconfig b/arch/score/Kconfig index e73bc781cc14..288add8d168f 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -43,9 +43,6 @@ config NO_DMA config RWSEM_GENERIC_SPINLOCK def_bool y -config GENERIC_FIND_NEXT_BIT - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b44e37753b9a..74495a5ea027 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -71,12 +71,6 @@ config GENERIC_CSUM def_bool y depends on SUPERH64 -config GENERIC_FIND_NEXT_BIT - def_bool y - -config GENERIC_FIND_BIT_LE - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig index 77ec0e7b8ddf..e7583484cc07 100644 --- a/arch/sh/configs/apsh4ad0a_defconfig +++ b/arch/sh/configs/apsh4ad0a_defconfig @@ -7,7 +7,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig index c41650572d79..8a7dd7b59c5c 100644 --- a/arch/sh/configs/sdk7786_defconfig +++ b/arch/sh/configs/sdk7786_defconfig @@ -12,7 +12,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index a468ff227fc6..72c3fad7383f 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -8,7 +8,6 @@ CONFIG_RCU_TRACE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index 3f92d37c6374..6bb413036892 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index 7b3daec6fefe..8bfa4d056d7a 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h index 4235e228d921..f3613952d1ae 100644 --- a/arch/sh/include/asm/kgdb.h +++ b/arch/sh/include/asm/kgdb.h @@ -34,5 +34,6 @@ static inline void arch_kgdb_breakpoint(void) #define CACHE_FLUSH_IS_SAFE 1 #define BREAK_INSTR_SIZE 2 +#define GDB_ADJUSTS_BREAK_OFFSET #endif /* __ASM_SH_KGDB_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index de167d3a1a80..40725b4a8018 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -40,9 +40,8 @@ #include <asm/system.h> #define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define user_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) #define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) -#define instruction_pointer(regs) ((unsigned long)(regs)->pc) +#define GET_USP(regs) ((regs)->regs[15]) extern void show_regs(struct pt_regs *); @@ -139,6 +138,9 @@ static inline unsigned long profile_pc(struct pt_regs *regs) return pc; } +#define profile_pc profile_pc + +#include <asm-generic/ptrace.h> #endif /* __KERNEL__ */ #endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 63a027c9ada5..af32e17fa170 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -190,14 +190,6 @@ config RWSEM_XCHGADD_ALGORITHM bool default y if SPARC64 -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y if !ULTRA_HAS_POPULATION_COUNT diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 635e1bfb1c5d..e1e50101b3bb 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -5,7 +5,6 @@ config TILE def_bool y select HAVE_KVM if !TILEGX select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT select USE_GENERIC_SMP_HELPERS select CC_OPTIMIZE_FOR_SIZE select HAVE_GENERIC_HARDIRQS diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index 795ea8e869f4..8aae429a56e2 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -15,7 +15,6 @@ endmenu config UML_X86 def_bool y select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT config 64BIT bool diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 483775f42d2a..da349723d411 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -64,7 +64,6 @@ config X86 select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 6f9872658dd2..2bf18059fbea 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -10,7 +10,6 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index ee01a9d5d4f0..22a0dc8e51dd 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -11,7 +11,6 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h index 396f5b5fc4d7..77e95f54570a 100644 --- a/arch/x86/include/asm/kgdb.h +++ b/arch/x86/include/asm/kgdb.h @@ -77,6 +77,7 @@ static inline void arch_kgdb_breakpoint(void) } #define BREAK_INSTR_SIZE 1 #define CACHE_FLUSH_IS_SAFE 1 +#define GDB_ADJUSTS_BREAK_OFFSET extern int kgdb_ll_trap(int cmd, const char *str, struct pt_regs *regs, long err, int trap, int sig); diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 1babf8adecdf..94e7618fcac8 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -136,6 +136,7 @@ struct cpuinfo_x86; struct task_struct; extern unsigned long profile_pc(struct pt_regs *regs); +#define profile_pc profile_pc extern unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs); @@ -202,20 +203,11 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) #endif } -static inline unsigned long instruction_pointer(struct pt_regs *regs) -{ - return regs->ip; -} - -static inline unsigned long frame_pointer(struct pt_regs *regs) -{ - return regs->bp; -} +#define GET_IP(regs) ((regs)->ip) +#define GET_FP(regs) ((regs)->bp) +#define GET_USP(regs) ((regs)->sp) -static inline unsigned long user_stack_pointer(struct pt_regs *regs) -{ - return regs->sp; -} +#include <asm-generic/ptrace.h> /* Query offset/name of register from its name/offset */ extern int regs_query_register_offset(const char *name); diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 83e2efd181e2..9db5583b6d38 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -51,6 +51,10 @@ extern int unsynchronized_tsc(void); extern int check_tsc_unstable(void); extern unsigned long native_calibrate_tsc(void); +#ifdef CONFIG_X86_64 +extern cycles_t vread_tsc(void); +#endif + /* * Boot-time check whether the TSCs are synchronized across * all CPUs/cores: diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h index 9064052b73de..bb0522850b74 100644 --- a/arch/x86/include/asm/vdso.h +++ b/arch/x86/include/asm/vdso.h @@ -1,20 +1,6 @@ #ifndef _ASM_X86_VDSO_H #define _ASM_X86_VDSO_H -#ifdef CONFIG_X86_64 -extern const char VDSO64_PRELINK[]; - -/* - * Given a pointer to the vDSO image, find the pointer to VDSO64_name - * as that symbol is defined in the vDSO sources or linker script. - */ -#define VDSO64_SYMBOL(base, name) \ -({ \ - extern const char VDSO64_##name[]; \ - (void *)(VDSO64_##name - VDSO64_PRELINK + (unsigned long)(base)); \ -}) -#endif - #if defined CONFIG_X86_32 || defined CONFIG_COMPAT extern const char VDSO32_PRELINK[]; diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h index 3d61e204826f..646b4c1ca695 100644 --- a/arch/x86/include/asm/vgtod.h +++ b/arch/x86/include/asm/vgtod.h @@ -23,8 +23,6 @@ struct vsyscall_gtod_data { struct timespec wall_to_monotonic; struct timespec wall_time_coarse; }; -extern struct vsyscall_gtod_data __vsyscall_gtod_data -__section_vsyscall_gtod_data; extern struct vsyscall_gtod_data vsyscall_gtod_data; #endif /* _ASM_X86_VGTOD_H */ diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h index d0983d255fbd..d55597351f6a 100644 --- a/arch/x86/include/asm/vsyscall.h +++ b/arch/x86/include/asm/vsyscall.h @@ -16,27 +16,19 @@ enum vsyscall_num { #ifdef __KERNEL__ #include <linux/seqlock.h> -#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16))) -#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16))) - /* Definitions for CONFIG_GENERIC_TIME definitions */ -#define __section_vsyscall_gtod_data __attribute__ \ - ((unused, __section__ (".vsyscall_gtod_data"),aligned(16))) -#define __section_vsyscall_clock __attribute__ \ - ((unused, __section__ (".vsyscall_clock"),aligned(16))) #define __vsyscall_fn \ __attribute__ ((unused, __section__(".vsyscall_fn"))) notrace #define VGETCPU_RDTSCP 1 #define VGETCPU_LSL 2 -extern int __vgetcpu_mode; -extern volatile unsigned long __jiffies; - /* kernel space (writeable) */ extern int vgetcpu_mode; extern struct timezone sys_tz; +#include <asm/vvar.h> + extern void map_vsyscall(void); #endif /* __KERNEL__ */ diff --git a/arch/x86/include/asm/vvar.h b/arch/x86/include/asm/vvar.h new file mode 100644 index 000000000000..341b3559452b --- /dev/null +++ b/arch/x86/include/asm/vvar.h @@ -0,0 +1,52 @@ +/* + * vvar.h: Shared vDSO/kernel variable declarations + * Copyright (c) 2011 Andy Lutomirski + * Subject to the GNU General Public License, version 2 + * + * A handful of variables are accessible (read-only) from userspace + * code in the vsyscall page and the vdso. They are declared here. + * Some other file must define them with DEFINE_VVAR. + * + * In normal kernel code, they are used like any other variable. + * In user code, they are accessed through the VVAR macro. + * + * Each of these variables lives in the vsyscall page, and each + * one needs a unique offset within the little piece of the page + * reserved for vvars. Specify that offset in DECLARE_VVAR. + * (There are 896 bytes available. If you mess up, the linker will + * catch it.) + */ + +/* Offset of vars within vsyscall page */ +#define VSYSCALL_VARS_OFFSET (3072 + 128) + +#if defined(__VVAR_KERNEL_LDS) + +/* The kernel linker script defines its own magic to put vvars in the + * right place. + */ +#define DECLARE_VVAR(offset, type, name) \ + EMIT_VVAR(name, VSYSCALL_VARS_OFFSET + offset) + +#else + +#define DECLARE_VVAR(offset, type, name) \ + static type const * const vvaraddr_ ## name = \ + (void *)(VSYSCALL_START + VSYSCALL_VARS_OFFSET + (offset)); + +#define DEFINE_VVAR(type, name) \ + type __vvar_ ## name \ + __attribute__((section(".vsyscall_var_" #name), aligned(16))) + +#define VVAR(name) (*vvaraddr_ ## name) + +#endif + +/* DECLARE_VVAR(offset, type, name) */ + +DECLARE_VVAR(0, volatile unsigned long, jiffies) +DECLARE_VVAR(8, int, vgetcpu_mode) +DECLARE_VVAR(128, struct vsyscall_gtod_data, vsyscall_gtod_data) + +#undef DECLARE_VVAR +#undef VSYSCALL_VARS_OFFSET diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index 8508bfe52296..d240ea950519 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -447,6 +447,13 @@ HYPERVISOR_hvm_op(int op, void *arg) return _hypercall2(unsigned long, hvm_op, op, arg); } +static inline int +HYPERVISOR_tmem_op( + struct tmem_op *op) +{ + return _hypercall1(int, tmem_op, op); +} + static inline void MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) { diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 250806472a7e..f5abe3a245b8 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -8,7 +8,6 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) ifdef CONFIG_FUNCTION_TRACER # Do not profile debug and lowlevel utilities -CFLAGS_REMOVE_tsc.o = -pg CFLAGS_REMOVE_rtc.o = -pg CFLAGS_REMOVE_paravirt-spinlocks.o = -pg CFLAGS_REMOVE_pvclock.o = -pg @@ -24,13 +23,16 @@ endif nostackp := $(call cc-option, -fno-stack-protector) CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp) CFLAGS_hpet.o := $(nostackp) -CFLAGS_tsc.o := $(nostackp) +CFLAGS_vread_tsc_64.o := $(nostackp) CFLAGS_paravirt.o := $(nostackp) GCOV_PROFILE_vsyscall_64.o := n GCOV_PROFILE_hpet.o := n GCOV_PROFILE_tsc.o := n GCOV_PROFILE_paravirt.o := n +# vread_tsc_64 is hot and should be fully optimized: +CFLAGS_REMOVE_vread_tsc_64.o = -pg -fno-optimize-sibling-calls + obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o ldt.o dumpstack.o @@ -39,7 +41,7 @@ obj-$(CONFIG_IRQ_WORK) += irq_work.o obj-y += probe_roms.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o -obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o +obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o vread_tsc_64.o obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c index 25a28a245937..00cbb272627f 100644 --- a/arch/x86/kernel/time.c +++ b/arch/x86/kernel/time.c @@ -23,7 +23,7 @@ #include <asm/time.h> #ifdef CONFIG_X86_64 -volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; +DEFINE_VVAR(volatile unsigned long, jiffies) = INITIAL_JIFFIES; #endif unsigned long profile_pc(struct pt_regs *regs) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 9335bf7dd2e7..6cc6922262af 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -763,25 +763,6 @@ static cycle_t read_tsc(struct clocksource *cs) ret : clocksource_tsc.cycle_last; } -#ifdef CONFIG_X86_64 -static cycle_t __vsyscall_fn vread_tsc(void) -{ - cycle_t ret; - - /* - * Surround the RDTSC by barriers, to make sure it's not - * speculated to outside the seqlock critical section and - * does not cause time warps: - */ - rdtsc_barrier(); - ret = (cycle_t)vget_cycles(); - rdtsc_barrier(); - - return ret >= __vsyscall_gtod_data.clock.cycle_last ? - ret : __vsyscall_gtod_data.clock.cycle_last; -} -#endif - static void resume_tsc(struct clocksource *cs) { clocksource_tsc.cycle_last = 0; diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 61682f0ac264..89aed99aafce 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -161,6 +161,12 @@ SECTIONS #define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0) #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) +#define EMIT_VVAR(x, offset) .vsyscall_var_ ## x \ + ADDR(.vsyscall_0) + offset \ + : AT(VLOAD(.vsyscall_var_ ## x)) { \ + *(.vsyscall_var_ ## x) \ + } \ + x = VVIRT(.vsyscall_var_ ## x); . = ALIGN(4096); __vsyscall_0 = .; @@ -175,18 +181,6 @@ SECTIONS *(.vsyscall_fn) } - . = ALIGN(L1_CACHE_BYTES); - .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) { - *(.vsyscall_gtod_data) - } - - vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); - .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) { - *(.vsyscall_clock) - } - vsyscall_clock = VVIRT(.vsyscall_clock); - - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { *(.vsyscall_1) } @@ -194,21 +188,14 @@ SECTIONS *(.vsyscall_2) } - .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { - *(.vgetcpu_mode) - } - vgetcpu_mode = VVIRT(.vgetcpu_mode); - - . = ALIGN(L1_CACHE_BYTES); - .jiffies : AT(VLOAD(.jiffies)) { - *(.jiffies) - } - jiffies = VVIRT(.jiffies); - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { *(.vsyscall_3) } +#define __VVAR_KERNEL_LDS +#include <asm/vvar.h> +#undef __VVAR_KERNEL_LDS + . = __vsyscall_0 + PAGE_SIZE; #undef VSYSCALL_ADDR @@ -216,6 +203,7 @@ SECTIONS #undef VLOAD #undef VVIRT_OFFSET #undef VVIRT +#undef EMIT_VVAR #endif /* CONFIG_X86_64 */ diff --git a/arch/x86/kernel/vread_tsc_64.c b/arch/x86/kernel/vread_tsc_64.c new file mode 100644 index 000000000000..a81aa9e9894c --- /dev/null +++ b/arch/x86/kernel/vread_tsc_64.c @@ -0,0 +1,36 @@ +/* This code runs in userspace. */ + +#define DISABLE_BRANCH_PROFILING +#include <asm/vgtod.h> + +notrace cycle_t __vsyscall_fn vread_tsc(void) +{ + cycle_t ret; + u64 last; + + /* + * Empirically, a fence (of type that depends on the CPU) + * before rdtsc is enough to ensure that rdtsc is ordered + * with respect to loads. The various CPU manuals are unclear + * as to whether rdtsc can be reordered with later loads, + * but no one has ever seen it happen. + */ + rdtsc_barrier(); + ret = (cycle_t)vget_cycles(); + + last = VVAR(vsyscall_gtod_data).clock.cycle_last; + + if (likely(ret >= last)) + return ret; + + /* + * GCC likes to generate cmov here, but this branch is extremely + * predictable (it's just a funciton of time and the likely is + * very likely) and there's a data dependence, so force GCC + * to generate a branch instead. I don't barrier() because + * we don't actually need a barrier, and if this function + * ever gets inlined it will generate worse code. + */ + asm volatile (""); + return last; +} diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index dcbb28c4b694..3e682184d76c 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -49,17 +49,10 @@ __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace #define __syscall_clobber "r11","cx","memory" -/* - * vsyscall_gtod_data contains data that is : - * - readonly from vsyscalls - * - written by timer interrupt or systcl (/proc/sys/kernel/vsyscall64) - * Try to keep this structure as small as possible to avoid cache line ping pongs - */ -int __vgetcpu_mode __section_vgetcpu_mode; - -struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data = +DEFINE_VVAR(int, vgetcpu_mode); +DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) = { - .lock = SEQLOCK_UNLOCKED, + .lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock), .sysctl_enabled = 1, }; @@ -97,7 +90,7 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, */ static __always_inline void do_get_tz(struct timezone * tz) { - *tz = __vsyscall_gtod_data.sys_tz; + *tz = VVAR(vsyscall_gtod_data).sys_tz; } static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) @@ -126,23 +119,24 @@ static __always_inline void do_vgettimeofday(struct timeval * tv) unsigned long mult, shift, nsec; cycle_t (*vread)(void); do { - seq = read_seqbegin(&__vsyscall_gtod_data.lock); + seq = read_seqbegin(&VVAR(vsyscall_gtod_data).lock); - vread = __vsyscall_gtod_data.clock.vread; - if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) { + vread = VVAR(vsyscall_gtod_data).clock.vread; + if (unlikely(!VVAR(vsyscall_gtod_data).sysctl_enabled || + !vread)) { gettimeofday(tv,NULL); return; } now = vread(); - base = __vsyscall_gtod_data.clock.cycle_last; - mask = __vsyscall_gtod_data.clock.mask; - mult = __vsyscall_gtod_data.clock.mult; - shift = __vsyscall_gtod_data.clock.shift; + base = VVAR(vsyscall_gtod_data).clock.cycle_last; + mask = VVAR(vsyscall_gtod_data).clock.mask; + mult = VVAR(vsyscall_gtod_data).clock.mult; + shift = VVAR(vsyscall_gtod_data).clock.shift; - tv->tv_sec = __vsyscall_gtod_data.wall_time_sec; - nsec = __vsyscall_gtod_data.wall_time_nsec; - } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + tv->tv_sec = VVAR(vsyscall_gtod_data).wall_time_sec; + nsec = VVAR(vsyscall_gtod_data).wall_time_nsec; + } while (read_seqretry(&VVAR(vsyscall_gtod_data).lock, seq)); /* calculate interval: */ cycle_delta = (now - base) & mask; @@ -171,15 +165,15 @@ time_t __vsyscall(1) vtime(time_t *t) { unsigned seq; time_t result; - if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) + if (unlikely(!VVAR(vsyscall_gtod_data).sysctl_enabled)) return time_syscall(t); do { - seq = read_seqbegin(&__vsyscall_gtod_data.lock); + seq = read_seqbegin(&VVAR(vsyscall_gtod_data).lock); - result = __vsyscall_gtod_data.wall_time_sec; + result = VVAR(vsyscall_gtod_data).wall_time_sec; - } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + } while (read_seqretry(&VVAR(vsyscall_gtod_data).lock, seq)); if (t) *t = result; @@ -208,9 +202,9 @@ vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) We do this here because otherwise user space would do it on its own in a likely inferior way (no access to jiffies). If you don't like it pass NULL. */ - if (tcache && tcache->blob[0] == (j = __jiffies)) { + if (tcache && tcache->blob[0] == (j = VVAR(jiffies))) { p = tcache->blob[1]; - } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { + } else if (VVAR(vgetcpu_mode) == VGETCPU_RDTSCP) { /* Load per CPU data from RDTSCP */ native_read_tscp(&p); } else { diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index b6552b189bcd..bef0bc962400 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -11,7 +11,7 @@ vdso-install-$(VDSO32-y) += $(vdso32-images) # files to link into the vdso -vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o vvar.o +vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o # files to link into kernel obj-$(VDSO64-y) += vma.o vdso.o @@ -37,11 +37,24 @@ $(obj)/%.so: OBJCOPYFLAGS := -S $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) +# +# Don't omit frame pointers for ease of userspace debugging, but do +# optimize sibling calls. +# CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \ - $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) + $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \ + -fno-omit-frame-pointer -foptimize-sibling-calls $(vobjs): KBUILD_CFLAGS += $(CFL) +# +# vDSO code runs in userspace and -pg doesn't help with profiling anyway. +# +CFLAGS_REMOVE_vdso-note.o = -pg +CFLAGS_REMOVE_vclock_gettime.o = -pg +CFLAGS_REMOVE_vgetcpu.o = -pg +CFLAGS_REMOVE_vvar.o = -pg + targets += vdso-syms.lds obj-$(VDSO64-y) += vdso-syms.lds diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index ee55754cc3c5..a724905fdae7 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -2,7 +2,7 @@ * Copyright 2006 Andi Kleen, SUSE Labs. * Subject to the GNU Public License, v.2 * - * Fast user context implementation of clock_gettime and gettimeofday. + * Fast user context implementation of clock_gettime, gettimeofday, and time. * * The code should have no internal unresolved relocations. * Check with readelf after changing. @@ -22,9 +22,8 @@ #include <asm/hpet.h> #include <asm/unistd.h> #include <asm/io.h> -#include "vextern.h" -#define gtod vdso_vsyscall_gtod_data +#define gtod (&VVAR(vsyscall_gtod_data)) notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { @@ -56,22 +55,6 @@ notrace static noinline int do_realtime(struct timespec *ts) return 0; } -/* Copy of the version in kernel/time.c which we cannot directly access */ -notrace static void -vset_normalized_timespec(struct timespec *ts, long sec, long nsec) -{ - while (nsec >= NSEC_PER_SEC) { - nsec -= NSEC_PER_SEC; - ++sec; - } - while (nsec < 0) { - nsec += NSEC_PER_SEC; - --sec; - } - ts->tv_sec = sec; - ts->tv_nsec = nsec; -} - notrace static noinline int do_monotonic(struct timespec *ts) { unsigned long seq, ns, secs; @@ -82,7 +65,17 @@ notrace static noinline int do_monotonic(struct timespec *ts) secs += gtod->wall_to_monotonic.tv_sec; ns += gtod->wall_to_monotonic.tv_nsec; } while (unlikely(read_seqretry(>od->lock, seq))); - vset_normalized_timespec(ts, secs, ns); + + /* wall_time_nsec, vgetns(), and wall_to_monotonic.tv_nsec + * are all guaranteed to be nonnegative. + */ + while (ns >= NSEC_PER_SEC) { + ns -= NSEC_PER_SEC; + ++secs; + } + ts->tv_sec = secs; + ts->tv_nsec = ns; + return 0; } @@ -107,7 +100,17 @@ notrace static noinline int do_monotonic_coarse(struct timespec *ts) secs += gtod->wall_to_monotonic.tv_sec; ns += gtod->wall_to_monotonic.tv_nsec; } while (unlikely(read_seqretry(>od->lock, seq))); - vset_normalized_timespec(ts, secs, ns); + + /* wall_time_nsec and wall_to_monotonic.tv_nsec are + * guaranteed to be between 0 and NSEC_PER_SEC. + */ + if (ns >= NSEC_PER_SEC) { + ns -= NSEC_PER_SEC; + ++secs; + } + ts->tv_sec = secs; + ts->tv_nsec = ns; + return 0; } @@ -157,3 +160,32 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) } int gettimeofday(struct timeval *, struct timezone *) __attribute__((weak, alias("__vdso_gettimeofday"))); + +/* This will break when the xtime seconds get inaccurate, but that is + * unlikely */ + +static __always_inline long time_syscall(long *t) +{ + long secs; + asm volatile("syscall" + : "=a" (secs) + : "0" (__NR_time), "D" (t) : "cc", "r11", "cx", "memory"); + return secs; +} + +notrace time_t __vdso_time(time_t *t) +{ + time_t result; + + if (unlikely(!VVAR(vsyscall_gtod_data).sysctl_enabled)) + return time_syscall(t); + + /* This is atomic on x86_64 so we don't need any locks. */ + result = ACCESS_ONCE(VVAR(vsyscall_gtod_data).wall_time_sec); + + if (t) + *t = result; + return result; +} +int time(time_t *t) + __attribute__((weak, alias("__vdso_time"))); diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/vdso/vdso.lds.S index 4e5dd3b4de7f..b96b2677cad8 100644 --- a/arch/x86/vdso/vdso.lds.S +++ b/arch/x86/vdso/vdso.lds.S @@ -23,15 +23,10 @@ VERSION { __vdso_gettimeofday; getcpu; __vdso_getcpu; + time; + __vdso_time; local: *; }; } VDSO64_PRELINK = VDSO_PRELINK; - -/* - * Define VDSO64_x for each VEXTERN(x), for use via VDSO64_SYMBOL. - */ -#define VEXTERN(x) VDSO64_ ## x = vdso_ ## x; -#include "vextern.h" -#undef VEXTERN diff --git a/arch/x86/vdso/vextern.h b/arch/x86/vdso/vextern.h deleted file mode 100644 index 1683ba2ae3e8..000000000000 --- a/arch/x86/vdso/vextern.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef VEXTERN -#include <asm/vsyscall.h> -#define VEXTERN(x) \ - extern typeof(x) *vdso_ ## x __attribute__((visibility("hidden"))); -#endif - -#define VMAGIC 0xfeedbabeabcdefabUL - -/* Any kernel variables used in the vDSO must be exported in the main - kernel's vmlinux.lds.S/vsyscall.h/proper __section and - put into vextern.h and be referenced as a pointer with vdso prefix. - The main kernel later fills in the values. */ - -VEXTERN(jiffies) -VEXTERN(vgetcpu_mode) -VEXTERN(vsyscall_gtod_data) diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c index 9fbc6b20026b..5463ad558573 100644 --- a/arch/x86/vdso/vgetcpu.c +++ b/arch/x86/vdso/vgetcpu.c @@ -11,14 +11,13 @@ #include <linux/time.h> #include <asm/vsyscall.h> #include <asm/vgtod.h> -#include "vextern.h" notrace long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) { unsigned int p; - if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) { + if (VVAR(vgetcpu_mode) == VGETCPU_RDTSCP) { /* Load per CPU data from RDTSCP */ native_read_tscp(&p); } else { diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 4b5d26f108bb..7abd2be0f9b9 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -15,9 +15,6 @@ #include <asm/proto.h> #include <asm/vdso.h> -#include "vextern.h" /* Just for VMAGIC. */ -#undef VEXTERN - unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; @@ -26,20 +23,10 @@ extern unsigned short vdso_sync_cpuid; static struct page **vdso_pages; static unsigned vdso_size; -static inline void *var_ref(void *p, char *name) -{ - if (*(void **)p != (void *)VMAGIC) { - printk("VDSO: variable %s broken\n", name); - vdso_enabled = 0; - } - return p; -} - static int __init init_vdso_vars(void) { int npages = (vdso_end - vdso_start + PAGE_SIZE - 1) / PAGE_SIZE; int i; - char *vbase; vdso_size = npages << PAGE_SHIFT; vdso_pages = kmalloc(sizeof(struct page *) * npages, GFP_KERNEL); @@ -54,20 +41,6 @@ static int __init init_vdso_vars(void) copy_page(page_address(p), vdso_start + i*PAGE_SIZE); } - vbase = vmap(vdso_pages, npages, 0, PAGE_KERNEL); - if (!vbase) - goto oom; - - if (memcmp(vbase, "\177ELF", 4)) { - printk("VDSO: I'm broken; not ELF\n"); - vdso_enabled = 0; - } - -#define VEXTERN(x) \ - *(typeof(__ ## x) **) var_ref(VDSO64_SYMBOL(vbase, x), #x) = &__ ## x; -#include "vextern.h" -#undef VEXTERN - vunmap(vbase); return 0; oom: diff --git a/arch/x86/vdso/vvar.c b/arch/x86/vdso/vvar.c deleted file mode 100644 index 1b7e703684f9..000000000000 --- a/arch/x86/vdso/vvar.c +++ /dev/null @@ -1,12 +0,0 @@ -/* Define pointer to external vDSO variables. - These are part of the vDSO. The kernel fills in the real addresses - at boot time. This is done because when the vdso is linked the - kernel isn't yet and we don't know the final addresses. */ -#include <linux/kernel.h> -#include <linux/time.h> -#include <asm/vsyscall.h> -#include <asm/timex.h> -#include <asm/vgtod.h> - -#define VEXTERN(x) typeof (__ ## x) *const vdso_ ## x = (void *)VMAGIC; -#include "vextern.h" diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 02d752460371..dc708dcc62f1 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -75,67 +75,12 @@ #include "mmu.h" #include "debugfs.h" -#define MMU_UPDATE_HISTO 30 - /* * Protects atomic reservation decrease/increase against concurrent increases. * Also protects non-atomic updates of current_pages and balloon lists. */ DEFINE_SPINLOCK(xen_reservation_lock); -#ifdef CONFIG_XEN_DEBUG_FS - -static struct { - u32 pgd_update; - u32 pgd_update_pinned; - u32 pgd_update_batched; - - u32 pud_update; - u32 pud_update_pinned; - u32 pud_update_batched; - - u32 pmd_update; - u32 pmd_update_pinned; - u32 pmd_update_batched; - - u32 pte_update; - u32 pte_update_pinned; - u32 pte_update_batched; - - u32 mmu_update; - u32 mmu_update_extended; - u32 mmu_update_histo[MMU_UPDATE_HISTO]; - - u32 prot_commit; - u32 prot_commit_batched; - - u32 set_pte_at; - u32 set_pte_at_batched; - u32 set_pte_at_pinned; - u32 set_pte_at_current; - u32 set_pte_at_kernel; -} mmu_stats; - -static u8 zero_stats; - -static inline void check_zero(void) -{ - if (unlikely(zero_stats)) { - memset(&mmu_stats, 0, sizeof(mmu_stats)); - zero_stats = 0; - } -} - -#define ADD_STATS(elem, val) \ - do { check_zero(); mmu_stats.elem += (val); } while(0) - -#else /* !CONFIG_XEN_DEBUG_FS */ - -#define ADD_STATS(elem, val) do { (void)(val); } while(0) - -#endif /* CONFIG_XEN_DEBUG_FS */ - - /* * Identity map, in addition to plain kernel map. This needs to be * large enough to allocate page table pages to allocate the rest. @@ -243,11 +188,6 @@ static bool xen_page_pinned(void *ptr) return PagePinned(page); } -static bool xen_iomap_pte(pte_t pte) -{ - return pte_flags(pte) & _PAGE_IOMAP; -} - void xen_set_domain_pte(pte_t *ptep, pte_t pteval, unsigned domid) { struct multicall_space mcs; @@ -257,7 +197,7 @@ void xen_set_domain_pte(pte_t *ptep, pte_t pteval, unsigned domid) u = mcs.args; /* ptep might be kmapped when using 32-bit HIGHPTE */ - u->ptr = arbitrary_virt_to_machine(ptep).maddr; + u->ptr = virt_to_machine(ptep).maddr; u->val = pte_val_ma(pteval); MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, domid); @@ -266,11 +206,6 @@ void xen_set_domain_pte(pte_t *ptep, pte_t pteval, unsigned domid) } EXPORT_SYMBOL_GPL(xen_set_domain_pte); -static void xen_set_iomap_pte(pte_t *ptep, pte_t pteval) -{ - xen_set_domain_pte(ptep, pteval, DOMID_IO); -} - static void xen_extend_mmu_update(const struct mmu_update *update) { struct multicall_space mcs; @@ -279,27 +214,17 @@ static void xen_extend_mmu_update(const struct mmu_update *update) mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u)); if (mcs.mc != NULL) { - ADD_STATS(mmu_update_extended, 1); - ADD_STATS(mmu_update_histo[mcs.mc->args[1]], -1); - mcs.mc->args[1]++; - - if (mcs.mc->args[1] < MMU_UPDATE_HISTO) - ADD_STATS(mmu_update_histo[mcs.mc->args[1]], 1); - else - ADD_STATS(mmu_update_histo[0], 1); } else { - ADD_STATS(mmu_update, 1); mcs = __xen_mc_entry(sizeof(*u)); MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF); - ADD_STATS(mmu_update_histo[1], 1); } u = mcs.args; *u = *update; } -void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) +static void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) { struct mmu_update u; @@ -312,17 +237,13 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) u.val = pmd_val_ma(val); xen_extend_mmu_update(&u); - ADD_STATS(pmd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static void xen_set_pmd(pmd_t *ptr, pmd_t val) { - ADD_STATS(pmd_update, 1); - /* If page is not pinned, we can just update the entry directly */ if (!xen_page_pinned(ptr)) { @@ -330,8 +251,6 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val) return; } - ADD_STATS(pmd_update_pinned, 1); - xen_set_pmd_hyper(ptr, val); } @@ -344,35 +263,34 @@ void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags) set_pte_vaddr(vaddr, mfn_pte(mfn, flags)); } -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval) +static bool xen_batched_set_pte(pte_t *ptep, pte_t pteval) { - if (xen_iomap_pte(pteval)) { - xen_set_iomap_pte(ptep, pteval); - goto out; - } + struct mmu_update u; - ADD_STATS(set_pte_at, 1); -// ADD_STATS(set_pte_at_pinned, xen_page_pinned(ptep)); - ADD_STATS(set_pte_at_current, mm == current->mm); - ADD_STATS(set_pte_at_kernel, mm == &init_mm); + if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) + return false; - if (mm == current->mm || mm == &init_mm) { - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) { - struct multicall_space mcs; - mcs = xen_mc_entry(0); + xen_mc_batch(); - MULTI_update_va_mapping(mcs.mc, addr, pteval, 0); - ADD_STATS(set_pte_at_batched, 1); - xen_mc_issue(PARAVIRT_LAZY_MMU); - goto out; - } else - if (HYPERVISOR_update_va_mapping(addr, pteval, 0) == 0) - goto out; - } - xen_set_pte(ptep, pteval); + u.ptr = virt_to_machine(ptep).maddr | MMU_NORMAL_PT_UPDATE; + u.val = pte_val_ma(pteval); + xen_extend_mmu_update(&u); + + xen_mc_issue(PARAVIRT_LAZY_MMU); -out: return; + return true; +} + +static void xen_set_pte(pte_t *ptep, pte_t pteval) +{ + if (!xen_batched_set_pte(ptep, pteval)) + native_set_pte(ptep, pteval); +} + +static void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + xen_set_pte(ptep, pteval); } pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, @@ -389,13 +307,10 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, xen_mc_batch(); - u.ptr = arbitrary_virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD; + u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD; u.val = pte_val_ma(pte); xen_extend_mmu_update(&u); - ADD_STATS(prot_commit, 1); - ADD_STATS(prot_commit_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - xen_mc_issue(PARAVIRT_LAZY_MMU); } @@ -463,7 +378,7 @@ static pteval_t iomap_pte(pteval_t val) return val; } -pteval_t xen_pte_val(pte_t pte) +static pteval_t xen_pte_val(pte_t pte) { pteval_t pteval = pte.pte; @@ -480,7 +395,7 @@ pteval_t xen_pte_val(pte_t pte) } PV_CALLEE_SAVE_REGS_THUNK(xen_pte_val); -pgdval_t xen_pgd_val(pgd_t pgd) +static pgdval_t xen_pgd_val(pgd_t pgd) { return pte_mfn_to_pfn(pgd.pgd); } @@ -511,7 +426,7 @@ void xen_set_pat(u64 pat) WARN_ON(pat != 0x0007010600070106ull); } -pte_t xen_make_pte(pteval_t pte) +static pte_t xen_make_pte(pteval_t pte) { phys_addr_t addr = (pte & PTE_PFN_MASK); @@ -581,20 +496,20 @@ pte_t xen_make_pte_debug(pteval_t pte) PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte_debug); #endif -pgd_t xen_make_pgd(pgdval_t pgd) +static pgd_t xen_make_pgd(pgdval_t pgd) { pgd = pte_pfn_to_mfn(pgd); return native_make_pgd(pgd); } PV_CALLEE_SAVE_REGS_THUNK(xen_make_pgd); -pmdval_t xen_pmd_val(pmd_t pmd) +static pmdval_t xen_pmd_val(pmd_t pmd) { return pte_mfn_to_pfn(pmd.pmd); } PV_CALLEE_SAVE_REGS_THUNK(xen_pmd_val); -void xen_set_pud_hyper(pud_t *ptr, pud_t val) +static void xen_set_pud_hyper(pud_t *ptr, pud_t val) { struct mmu_update u; @@ -607,17 +522,13 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val) u.val = pud_val_ma(val); xen_extend_mmu_update(&u); - ADD_STATS(pud_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } -void xen_set_pud(pud_t *ptr, pud_t val) +static void xen_set_pud(pud_t *ptr, pud_t val) { - ADD_STATS(pud_update, 1); - /* If page is not pinned, we can just update the entry directly */ if (!xen_page_pinned(ptr)) { @@ -625,56 +536,28 @@ void xen_set_pud(pud_t *ptr, pud_t val) return; } - ADD_STATS(pud_update_pinned, 1); - xen_set_pud_hyper(ptr, val); } -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - if (xen_iomap_pte(pte)) { - xen_set_iomap_pte(ptep, pte); - return; - } - - ADD_STATS(pte_update, 1); -// ADD_STATS(pte_update_pinned, xen_page_pinned(ptep)); - ADD_STATS(pte_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - #ifdef CONFIG_X86_PAE - ptep->pte_high = pte.pte_high; - smp_wmb(); - ptep->pte_low = pte.pte_low; -#else - *ptep = pte; -#endif -} - -#ifdef CONFIG_X86_PAE -void xen_set_pte_atomic(pte_t *ptep, pte_t pte) +static void xen_set_pte_atomic(pte_t *ptep, pte_t pte) { - if (xen_iomap_pte(pte)) { - xen_set_iomap_pte(ptep, pte); - return; - } - set_64bit((u64 *)ptep, native_pte_val(pte)); } -void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - ptep->pte_low = 0; - smp_wmb(); /* make sure low gets written first */ - ptep->pte_high = 0; + if (!xen_batched_set_pte(ptep, native_make_pte(0))) + native_pte_clear(mm, addr, ptep); } -void xen_pmd_clear(pmd_t *pmdp) +static void xen_pmd_clear(pmd_t *pmdp) { set_pmd(pmdp, __pmd(0)); } #endif /* CONFIG_X86_PAE */ -pmd_t xen_make_pmd(pmdval_t pmd) +static pmd_t xen_make_pmd(pmdval_t pmd) { pmd = pte_pfn_to_mfn(pmd); return native_make_pmd(pmd); @@ -682,13 +565,13 @@ pmd_t xen_make_pmd(pmdval_t pmd) PV_CALLEE_SAVE_REGS_THUNK(xen_make_pmd); #if PAGETABLE_LEVELS == 4 -pudval_t xen_pud_val(pud_t pud) +static pudval_t xen_pud_val(pud_t pud) { return pte_mfn_to_pfn(pud.pud); } PV_CALLEE_SAVE_REGS_THUNK(xen_pud_val); -pud_t xen_make_pud(pudval_t pud) +static pud_t xen_make_pud(pudval_t pud) { pud = pte_pfn_to_mfn(pud); @@ -696,7 +579,7 @@ pud_t xen_make_pud(pudval_t pud) } PV_CALLEE_SAVE_REGS_THUNK(xen_make_pud); -pgd_t *xen_get_user_pgd(pgd_t *pgd) +static pgd_t *xen_get_user_pgd(pgd_t *pgd) { pgd_t *pgd_page = (pgd_t *)(((unsigned long)pgd) & PAGE_MASK); unsigned offset = pgd - pgd_page; @@ -728,7 +611,7 @@ static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) * 2. It is always pinned * 3. It has no user pagetable attached to it */ -void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) +static void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) { preempt_disable(); @@ -741,12 +624,10 @@ void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) preempt_enable(); } -void xen_set_pgd(pgd_t *ptr, pgd_t val) +static void xen_set_pgd(pgd_t *ptr, pgd_t val) { pgd_t *user_ptr = xen_get_user_pgd(ptr); - ADD_STATS(pgd_update, 1); - /* If page is not pinned, we can just update the entry directly */ if (!xen_page_pinned(ptr)) { @@ -758,9 +639,6 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val) return; } - ADD_STATS(pgd_update_pinned, 1); - ADD_STATS(pgd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - /* If it's pinned, then we can at least batch the kernel and user updates together. */ xen_mc_batch(); @@ -1162,14 +1040,14 @@ void xen_mm_unpin_all(void) spin_unlock(&pgd_lock); } -void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) +static void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); xen_pgd_pin(next); spin_unlock(&next->page_table_lock); } -void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) +static void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) { spin_lock(&mm->page_table_lock); xen_pgd_pin(mm); @@ -1256,7 +1134,7 @@ static void xen_drop_mm_ref(struct mm_struct *mm) * pagetable because of lazy tlb flushing. This means we need need to * switch all CPUs off this pagetable before we can unpin it. */ -void xen_exit_mmap(struct mm_struct *mm) +static void xen_exit_mmap(struct mm_struct *mm) { get_cpu(); /* make sure we don't move around */ xen_drop_mm_ref(mm); @@ -2371,7 +2249,7 @@ static int remap_area_mfn_pte_fn(pte_t *ptep, pgtable_t token, struct remap_data *rmd = data; pte_t pte = pte_mkspecial(pfn_pte(rmd->mfn++, rmd->prot)); - rmd->mmu_update->ptr = arbitrary_virt_to_machine(ptep).maddr; + rmd->mmu_update->ptr = virt_to_machine(ptep).maddr; rmd->mmu_update->val = pte_val_ma(pte); rmd->mmu_update++; @@ -2425,7 +2303,6 @@ out: EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_range); #ifdef CONFIG_XEN_DEBUG_FS - static int p2m_dump_open(struct inode *inode, struct file *filp) { return single_open(filp, p2m_dump_show, NULL); @@ -2437,65 +2314,4 @@ static const struct file_operations p2m_dump_fops = { .llseek = seq_lseek, .release = single_release, }; - -static struct dentry *d_mmu_debug; - -static int __init xen_mmu_debugfs(void) -{ - struct dentry *d_xen = xen_init_debugfs(); - - if (d_xen == NULL) - return -ENOMEM; - - d_mmu_debug = debugfs_create_dir("mmu", d_xen); - - debugfs_create_u8("zero_stats", 0644, d_mmu_debug, &zero_stats); - - debugfs_create_u32("pgd_update", 0444, d_mmu_debug, &mmu_stats.pgd_update); - debugfs_create_u32("pgd_update_pinned", 0444, d_mmu_debug, - &mmu_stats.pgd_update_pinned); - debugfs_create_u32("pgd_update_batched", 0444, d_mmu_debug, - &mmu_stats.pgd_update_pinned); - - debugfs_create_u32("pud_update", 0444, d_mmu_debug, &mmu_stats.pud_update); - debugfs_create_u32("pud_update_pinned", 0444, d_mmu_debug, - &mmu_stats.pud_update_pinned); - debugfs_create_u32("pud_update_batched", 0444, d_mmu_debug, - &mmu_stats.pud_update_pinned); - - debugfs_create_u32("pmd_update", 0444, d_mmu_debug, &mmu_stats.pmd_update); - debugfs_create_u32("pmd_update_pinned", 0444, d_mmu_debug, - &mmu_stats.pmd_update_pinned); - debugfs_create_u32("pmd_update_batched", 0444, d_mmu_debug, - &mmu_stats.pmd_update_pinned); - - debugfs_create_u32("pte_update", 0444, d_mmu_debug, &mmu_stats.pte_update); -// debugfs_create_u32("pte_update_pinned", 0444, d_mmu_debug, -// &mmu_stats.pte_update_pinned); - debugfs_create_u32("pte_update_batched", 0444, d_mmu_debug, - &mmu_stats.pte_update_pinned); - - debugfs_create_u32("mmu_update", 0444, d_mmu_debug, &mmu_stats.mmu_update); - debugfs_create_u32("mmu_update_extended", 0444, d_mmu_debug, - &mmu_stats.mmu_update_extended); - xen_debugfs_create_u32_array("mmu_update_histo", 0444, d_mmu_debug, - mmu_stats.mmu_update_histo, 20); - - debugfs_create_u32("set_pte_at", 0444, d_mmu_debug, &mmu_stats.set_pte_at); - debugfs_create_u32("set_pte_at_batched", 0444, d_mmu_debug, - &mmu_stats.set_pte_at_batched); - debugfs_create_u32("set_pte_at_current", 0444, d_mmu_debug, - &mmu_stats.set_pte_at_current); - debugfs_create_u32("set_pte_at_kernel", 0444, d_mmu_debug, - &mmu_stats.set_pte_at_kernel); - - debugfs_create_u32("prot_commit", 0444, d_mmu_debug, &mmu_stats.prot_commit); - debugfs_create_u32("prot_commit_batched", 0444, d_mmu_debug, - &mmu_stats.prot_commit_batched); - - debugfs_create_file("p2m", 0600, d_mmu_debug, NULL, &p2m_dump_fops); - return 0; -} -fs_initcall(xen_mmu_debugfs); - -#endif /* CONFIG_XEN_DEBUG_FS */ +#endif /* CONFIG_XEN_DEBUG_FS */ diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 537bb9aab777..73809bb951b4 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -15,43 +15,6 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn); void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); - -void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); -void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); -void xen_exit_mmap(struct mm_struct *mm); - -pteval_t xen_pte_val(pte_t); -pmdval_t xen_pmd_val(pmd_t); -pgdval_t xen_pgd_val(pgd_t); - -pte_t xen_make_pte(pteval_t); -pmd_t xen_make_pmd(pmdval_t); -pgd_t xen_make_pgd(pgdval_t); - -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); - -#ifdef CONFIG_X86_PAE -void xen_set_pte_atomic(pte_t *ptep, pte_t pte); -void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); -void xen_pmd_clear(pmd_t *pmdp); -#endif /* CONFIG_X86_PAE */ - -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); -void xen_set_pud(pud_t *ptr, pud_t val); -void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); -void xen_set_pud_hyper(pud_t *ptr, pud_t val); - -#if PAGETABLE_LEVELS == 4 -pudval_t xen_pud_val(pud_t pud); -pud_t xen_make_pud(pudval_t pudval); -void xen_set_pgd(pgd_t *pgdp, pgd_t pgd); -void xen_set_pgd_hyper(pgd_t *pgdp, pgd_t pgd); -#endif - -pgd_t *xen_get_user_pgd(pgd_t *pgd); - pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte); diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 7c275f5d0df0..5d43c1f8ada8 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -20,12 +20,6 @@ config XTENSA config RWSEM_XCHGADD_ALGORITHM def_bool y -config GENERIC_FIND_NEXT_BIT - def_bool y - -config GENERIC_FIND_BIT_LE - def_bool y - config GENERIC_HWEIGHT def_bool y |