[media] common: move media/common/tuners to media/tuners

Move the tuners one level up, as the "common" directory will be used
by drivers that are shared between more than one driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 480 insertions, 0 deletions

diff --git a/drivers/media/tuners/qt1010.c b/drivers/media/tuners/qt1010.c
new file mode 100644
index 000000000000..bdc39e11030e
--- /dev/null
+++ b/drivers/media/tuners/qt1010.c
@@ -0,0 +1,480 @@
+/*
+ *  Driver for Quantek QT1010 silicon tuner
+ *
+ *  Copyright (C) 2006 Antti Palosaari <crope@iki.fi>
+ *                     Aapo Tahkola <aet@rasterburn.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include "qt1010.h"
+#include "qt1010_priv.h"
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
+
+#define dprintk(args...) \
+	do { \
+		if (debug) printk(KERN_DEBUG "QT1010: " args); \
+	} while (0)
+
+/* read single register */
+static int qt1010_readreg(struct qt1010_priv *priv, u8 reg, u8 *val)
+{
+	struct i2c_msg msg[2] = {
+		{ .addr = priv->cfg->i2c_address,
+		  .flags = 0, .buf = &reg, .len = 1 },
+		{ .addr = priv->cfg->i2c_address,
+		  .flags = I2C_M_RD, .buf = val, .len = 1 },
+	};
+
+	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+		printk(KERN_WARNING "qt1010 I2C read failed\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* write single register */
+static int qt1010_writereg(struct qt1010_priv *priv, u8 reg, u8 val)
+{
+	u8 buf[2] = { reg, val };
+	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
+			       .flags = 0, .buf = buf, .len = 2 };
+
+	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+		printk(KERN_WARNING "qt1010 I2C write failed\n");
+		return -EREMOTEIO;
+	}
+	return 0;
+}
+
+/* dump all registers */
+static void qt1010_dump_regs(struct qt1010_priv *priv)
+{
+	u8 reg, val;
+
+	for (reg = 0; ; reg++) {
+		if (reg % 16 == 0) {
+			if (reg)
+				printk(KERN_CONT "\n");
+			printk(KERN_DEBUG "%02x:", reg);
+		}
+		if (qt1010_readreg(priv, reg, &val) == 0)
+			printk(KERN_CONT " %02x", val);
+		else
+			printk(KERN_CONT " --");
+		if (reg == 0x2f)
+			break;
+	}
+	printk(KERN_CONT "\n");
+}
+
+static int qt1010_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct qt1010_priv *priv;
+	int err;
+	u32 freq, div, mod1, mod2;
+	u8 i, tmpval, reg05;
+	qt1010_i2c_oper_t rd[48] = {
+		{ QT1010_WR, 0x01, 0x80 },
+		{ QT1010_WR, 0x02, 0x3f },
+		{ QT1010_WR, 0x05, 0xff }, /* 02 c write */
+		{ QT1010_WR, 0x06, 0x44 },
+		{ QT1010_WR, 0x07, 0xff }, /* 04 c write */
+		{ QT1010_WR, 0x08, 0x08 },
+		{ QT1010_WR, 0x09, 0xff }, /* 06 c write */
+		{ QT1010_WR, 0x0a, 0xff }, /* 07 c write */
+		{ QT1010_WR, 0x0b, 0xff }, /* 08 c write */
+		{ QT1010_WR, 0x0c, 0xe1 },
+		{ QT1010_WR, 0x1a, 0xff }, /* 10 c write */
+		{ QT1010_WR, 0x1b, 0x00 },
+		{ QT1010_WR, 0x1c, 0x89 },
+		{ QT1010_WR, 0x11, 0xff }, /* 13 c write */
+		{ QT1010_WR, 0x12, 0xff }, /* 14 c write */
+		{ QT1010_WR, 0x22, 0xff }, /* 15 c write */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xd0 },
+		{ QT1010_RD, 0x22, 0xff }, /* 16 c read */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_RD, 0x05, 0xff }, /* 20 c read */
+		{ QT1010_RD, 0x22, 0xff }, /* 21 c read */
+		{ QT1010_WR, 0x23, 0xd0 },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xe0 },
+		{ QT1010_RD, 0x23, 0xff }, /* 25 c read */
+		{ QT1010_RD, 0x23, 0xff }, /* 26 c read */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x24, 0xd0 },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xf0 },
+		{ QT1010_RD, 0x24, 0xff }, /* 31 c read */
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x14, 0x7f },
+		{ QT1010_WR, 0x15, 0x7f },
+		{ QT1010_WR, 0x05, 0xff }, /* 35 c write */
+		{ QT1010_WR, 0x06, 0x00 },
+		{ QT1010_WR, 0x15, 0x1f },
+		{ QT1010_WR, 0x16, 0xff },
+		{ QT1010_WR, 0x18, 0xff },
+		{ QT1010_WR, 0x1f, 0xff }, /* 40 c write */
+		{ QT1010_WR, 0x20, 0xff }, /* 41 c write */
+		{ QT1010_WR, 0x21, 0x53 },
+		{ QT1010_WR, 0x25, 0xff }, /* 43 c write */
+		{ QT1010_WR, 0x26, 0x15 },
+		{ QT1010_WR, 0x00, 0xff }, /* 45 c write */
+		{ QT1010_WR, 0x02, 0x00 },
+		{ QT1010_WR, 0x01, 0x00 }
+	};
+
+#define FREQ1 32000000 /* 32 MHz */
+#define FREQ2  4000000 /* 4 MHz Quartz oscillator in the stick? */
+
+	priv = fe->tuner_priv;
+	freq = c->frequency;
+	div = (freq + QT1010_OFFSET) / QT1010_STEP;
+	freq = (div * QT1010_STEP) - QT1010_OFFSET;
+	mod1 = (freq + QT1010_OFFSET) % FREQ1;
+	mod2 = (freq + QT1010_OFFSET) % FREQ2;
+	priv->frequency = freq;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+	/* reg 05 base value */
+	if      (freq < 290000000) reg05 = 0x14; /* 290 MHz */
+	else if (freq < 610000000) reg05 = 0x34; /* 610 MHz */
+	else if (freq < 802000000) reg05 = 0x54; /* 802 MHz */
+	else                       reg05 = 0x74;
+
+	/* 0x5 */
+	rd[2].val = reg05;
+
+	/* 07 - set frequency: 32 MHz scale */
+	rd[4].val = (freq + QT1010_OFFSET) / FREQ1;
+
+	/* 09 - changes every 8/24 MHz */
+	if (mod1 < 8000000) rd[6].val = 0x1d;
+	else                rd[6].val = 0x1c;
+
+	/* 0a - set frequency: 4 MHz scale (max 28 MHz) */
+	if      (mod1 < 1*FREQ2) rd[7].val = 0x09; /*  +0 MHz */
+	else if (mod1 < 2*FREQ2) rd[7].val = 0x08; /*  +4 MHz */
+	else if (mod1 < 3*FREQ2) rd[7].val = 0x0f; /*  +8 MHz */
+	else if (mod1 < 4*FREQ2) rd[7].val = 0x0e; /* +12 MHz */
+	else if (mod1 < 5*FREQ2) rd[7].val = 0x0d; /* +16 MHz */
+	else if (mod1 < 6*FREQ2) rd[7].val = 0x0c; /* +20 MHz */
+	else if (mod1 < 7*FREQ2) rd[7].val = 0x0b; /* +24 MHz */
+	else                     rd[7].val = 0x0a; /* +28 MHz */
+
+	/* 0b - changes every 2/2 MHz */
+	if (mod2 < 2000000) rd[8].val = 0x45;
+	else                rd[8].val = 0x44;
+
+	/* 1a - set frequency: 125 kHz scale (max 3875 kHz)*/
+	tmpval = 0x78; /* byte, overflows intentionally */
+	rd[10].val = tmpval-((mod2/QT1010_STEP)*0x08);
+
+	/* 11 */
+	rd[13].val = 0xfd; /* TODO: correct value calculation */
+
+	/* 12 */
+	rd[14].val = 0x91; /* TODO: correct value calculation */
+
+	/* 22 */
+	if      (freq < 450000000) rd[15].val = 0xd0; /* 450 MHz */
+	else if (freq < 482000000) rd[15].val = 0xd1; /* 482 MHz */
+	else if (freq < 514000000) rd[15].val = 0xd4; /* 514 MHz */
+	else if (freq < 546000000) rd[15].val = 0xd7; /* 546 MHz */
+	else if (freq < 610000000) rd[15].val = 0xda; /* 610 MHz */
+	else                       rd[15].val = 0xd0;
+
+	/* 05 */
+	rd[35].val = (reg05 & 0xf0);
+
+	/* 1f */
+	if      (mod1 <  8000000) tmpval = 0x00;
+	else if (mod1 < 12000000) tmpval = 0x01;
+	else if (mod1 < 16000000) tmpval = 0x02;
+	else if (mod1 < 24000000) tmpval = 0x03;
+	else if (mod1 < 28000000) tmpval = 0x04;
+	else                      tmpval = 0x05;
+	rd[40].val = (priv->reg1f_init_val + 0x0e + tmpval);
+
+	/* 20 */
+	if      (mod1 <  8000000) tmpval = 0x00;
+	else if (mod1 < 12000000) tmpval = 0x01;
+	else if (mod1 < 20000000) tmpval = 0x02;
+	else if (mod1 < 24000000) tmpval = 0x03;
+	else if (mod1 < 28000000) tmpval = 0x04;
+	else                      tmpval = 0x05;
+	rd[41].val = (priv->reg20_init_val + 0x0d + tmpval);
+
+	/* 25 */
+	rd[43].val = priv->reg25_init_val;
+
+	/* 00 */
+	rd[45].val = 0x92; /* TODO: correct value calculation */
+
+	dprintk("freq:%u 05:%02x 07:%02x 09:%02x 0a:%02x 0b:%02x " \
+		"1a:%02x 11:%02x 12:%02x 22:%02x 05:%02x 1f:%02x " \
+		"20:%02x 25:%02x 00:%02x", \
+		freq, rd[2].val, rd[4].val, rd[6].val, rd[7].val, rd[8].val, \
+		rd[10].val, rd[13].val, rd[14].val, rd[15].val, rd[35].val, \
+		rd[40].val, rd[41].val, rd[43].val, rd[45].val);
+
+	for (i = 0; i < ARRAY_SIZE(rd); i++) {
+		if (rd[i].oper == QT1010_WR) {
+			err = qt1010_writereg(priv, rd[i].reg, rd[i].val);
+		} else { /* read is required to proper locking */
+			err = qt1010_readreg(priv, rd[i].reg, &tmpval);
+		}
+		if (err) return err;
+	}
+
+	if (debug)
+		qt1010_dump_regs(priv);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+	return 0;
+}
+
+static int qt1010_init_meas1(struct qt1010_priv *priv,
+			     u8 oper, u8 reg, u8 reg_init_val, u8 *retval)
+{
+	u8 i, val1, val2;
+	int err;
+
+	qt1010_i2c_oper_t i2c_data[] = {
+		{ QT1010_WR, reg, reg_init_val },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, oper },
+		{ QT1010_RD, reg, 0xff }
+	};
+
+	for (i = 0; i < ARRAY_SIZE(i2c_data); i++) {
+		if (i2c_data[i].oper == QT1010_WR) {
+			err = qt1010_writereg(priv, i2c_data[i].reg,
+					      i2c_data[i].val);
+		} else {
+			err = qt1010_readreg(priv, i2c_data[i].reg, &val2);
+		}
+		if (err) return err;
+	}
+
+	do {
+		val1 = val2;
+		err = qt1010_readreg(priv, reg, &val2);
+		if (err) return err;
+		dprintk("compare reg:%02x %02x %02x", reg, val1, val2);
+	} while (val1 != val2);
+	*retval = val1;
+
+	return qt1010_writereg(priv, 0x1e, 0x00);
+}
+
+static int qt1010_init_meas2(struct qt1010_priv *priv,
+			    u8 reg_init_val, u8 *retval)
+{
+	u8 i, val;
+	int err;
+	qt1010_i2c_oper_t i2c_data[] = {
+		{ QT1010_WR, 0x07, reg_init_val },
+		{ QT1010_WR, 0x22, 0xd0 },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x1e, 0xd0 },
+		{ QT1010_RD, 0x22, 0xff },
+		{ QT1010_WR, 0x1e, 0x00 },
+		{ QT1010_WR, 0x22, 0xff }
+	};
+	for (i = 0; i < ARRAY_SIZE(i2c_data); i++) {
+		if (i2c_data[i].oper == QT1010_WR) {
+			err = qt1010_writereg(priv, i2c_data[i].reg,
+					      i2c_data[i].val);
+		} else {
+			err = qt1010_readreg(priv, i2c_data[i].reg, &val);
+		}
+		if (err) return err;
+	}
+	*retval = val;
+	return 0;
+}
+
+static int qt1010_init(struct dvb_frontend *fe)
+{
+	struct qt1010_priv *priv = fe->tuner_priv;
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	int err = 0;
+	u8 i, tmpval, *valptr = NULL;
+
+	qt1010_i2c_oper_t i2c_data[] = {
+		{ QT1010_WR, 0x01, 0x80 },
+		{ QT1010_WR, 0x0d, 0x84 },
+		{ QT1010_WR, 0x0e, 0xb7 },
+		{ QT1010_WR, 0x2a, 0x23 },
+		{ QT1010_WR, 0x2c, 0xdc },
+		{ QT1010_M1, 0x25, 0x40 }, /* get reg 25 init value */
+		{ QT1010_M1, 0x81, 0xff }, /* get reg 25 init value */
+		{ QT1010_WR, 0x2b, 0x70 },
+		{ QT1010_WR, 0x2a, 0x23 },
+		{ QT1010_M1, 0x26, 0x08 },
+		{ QT1010_M1, 0x82, 0xff },
+		{ QT1010_WR, 0x05, 0x14 },
+		{ QT1010_WR, 0x06, 0x44 },
+		{ QT1010_WR, 0x07, 0x28 },
+		{ QT1010_WR, 0x08, 0x0b },
+		{ QT1010_WR, 0x11, 0xfd },
+		{ QT1010_M1, 0x22, 0x0d },
+		{ QT1010_M1, 0xd0, 0xff },
+		{ QT1010_WR, 0x06, 0x40 },
+		{ QT1010_WR, 0x16, 0xf0 },
+		{ QT1010_WR, 0x02, 0x38 },
+		{ QT1010_WR, 0x03, 0x18 },
+		{ QT1010_WR, 0x20, 0xe0 },
+		{ QT1010_M1, 0x1f, 0x20 }, /* get reg 1f init value */
+		{ QT1010_M1, 0x84, 0xff }, /* get reg 1f init value */
+		{ QT1010_RD, 0x20, 0x20 }, /* get reg 20 init value */
+		{ QT1010_WR, 0x03, 0x19 },
+		{ QT1010_WR, 0x02, 0x3f },
+		{ QT1010_WR, 0x21, 0x53 },
+		{ QT1010_RD, 0x21, 0xff },
+		{ QT1010_WR, 0x11, 0xfd },
+		{ QT1010_WR, 0x05, 0x34 },
+		{ QT1010_WR, 0x06, 0x44 },
+		{ QT1010_WR, 0x08, 0x08 }
+	};
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+	for (i = 0; i < ARRAY_SIZE(i2c_data); i++) {
+		switch (i2c_data[i].oper) {
+		case QT1010_WR:
+			err = qt1010_writereg(priv, i2c_data[i].reg,
+					      i2c_data[i].val);
+			break;
+		case QT1010_RD:
+			if (i2c_data[i].val == 0x20)
+				valptr = &priv->reg20_init_val;
+			else
+				valptr = &tmpval;
+			err = qt1010_readreg(priv, i2c_data[i].reg, valptr);
+			break;
+		case QT1010_M1:
+			if (i2c_data[i].val == 0x25)
+				valptr = &priv->reg25_init_val;
+			else if (i2c_data[i].val == 0x1f)
+				valptr = &priv->reg1f_init_val;
+			else
+				valptr = &tmpval;
+			err = qt1010_init_meas1(priv, i2c_data[i+1].reg,
+						i2c_data[i].reg,
+						i2c_data[i].val, valptr);
+			i++;
+			break;
+		}
+		if (err) return err;
+	}
+
+	for (i = 0x31; i < 0x3a; i++) /* 0x31 - 0x39 */
+		if ((err = qt1010_init_meas2(priv, i, &tmpval)))
+			return err;
+
+	c->frequency = 545000000; /* Sigmatek DVB-110 545000000 */
+				      /* MSI Megasky 580 GL861 533000000 */
+	return qt1010_set_params(fe);
+}
+
+static int qt1010_release(struct dvb_frontend *fe)
+{
+	kfree(fe->tuner_priv);
+	fe->tuner_priv = NULL;
+	return 0;
+}
+
+static int qt1010_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	struct qt1010_priv *priv = fe->tuner_priv;
+	*frequency = priv->frequency;
+	return 0;
+}
+
+static int qt1010_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+	*frequency = 36125000;
+	return 0;
+}
+
+static const struct dvb_tuner_ops qt1010_tuner_ops = {
+	.info = {
+		.name           = "Quantek QT1010",
+		.frequency_min  = QT1010_MIN_FREQ,
+		.frequency_max  = QT1010_MAX_FREQ,
+		.frequency_step = QT1010_STEP,
+	},
+
+	.release       = qt1010_release,
+	.init          = qt1010_init,
+	/* TODO: implement sleep */
+
+	.set_params    = qt1010_set_params,
+	.get_frequency = qt1010_get_frequency,
+	.get_if_frequency = qt1010_get_if_frequency,
+};
+
+struct dvb_frontend * qt1010_attach(struct dvb_frontend *fe,
+				    struct i2c_adapter *i2c,
+				    struct qt1010_config *cfg)
+{
+	struct qt1010_priv *priv = NULL;
+	u8 id;
+
+	priv = kzalloc(sizeof(struct qt1010_priv), GFP_KERNEL);
+	if (priv == NULL)
+		return NULL;
+
+	priv->cfg = cfg;
+	priv->i2c = i2c;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+
+	/* Try to detect tuner chip. Probably this is not correct register. */
+	if (qt1010_readreg(priv, 0x29, &id) != 0 || (id != 0x39)) {
+		kfree(priv);
+		return NULL;
+	}
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+	printk(KERN_INFO "Quantek QT1010 successfully identified.\n");
+	memcpy(&fe->ops.tuner_ops, &qt1010_tuner_ops,
+	       sizeof(struct dvb_tuner_ops));
+
+	fe->tuner_priv = priv;
+	return fe;
+}
+EXPORT_SYMBOL(qt1010_attach);
+
+MODULE_DESCRIPTION("Quantek QT1010 silicon tuner driver");
+MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
+MODULE_AUTHOR("Aapo Tahkola <aet@rasterburn.org>");
+MODULE_VERSION("0.1");
+MODULE_LICENSE("GPL");