Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull first batch of arm-soc cleanups from Olof Johansson:
 "These cleanups are basically all over the place.  The idea is to
  collect changes with minimal impact but large number of changes so we
  can avoid them from distracting in the diffstat in the other series.

  A significant number of lines get removed here, in particular because
  the ixp2000 and ixp23xx platforms get removed.  These have never been
  extremely popular and have fallen into disuse over time with no active
  maintainer taking care of them.  The u5500 soc never made it into a
  product, so we are removing it from the ux500 platform.

  Many good cleanups also went into the at91 and omap platforms, as has
  been the case for a number of releases."

Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx}

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits)
  ARM: clps711x: Cleanup IRQ handling
  ARM clps711x: Removed unused header mach/time.h
  ARM: clps711x: Added note about support EP731x CPU to Kconfig
  ARM: clps711x: Added missing register definitions
  ARM: clps711x: Used own subarch directory for store header file
  Dove: Fix Section mismatch warnings
  ARM: orion5x: ts78xx debugging changes
  ARM: orion5x: remove PM dependency from ts78xx
  ARM: orion5x: ts78xx fix NAND resource off by one
  ARM: orion5x: ts78xx whitespace cleanups
  Orion5x: Fix Section mismatch warnings
  Orion5x: Fix warning: struct pci_dev declared inside paramter list
  ARM: clps711x: Combine header files into one for clps711x-targets
  ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c
  ARM: S3C24XX: Use common macro to define resources on mach-osiris.c
  ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable
  ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c
  ARM: S5PV210: Use common macro to define resources on dev-audio.c
  ARM: S5PC100: Use common macro to define resources on dev-audio.c
  ARM: S5P64X0: Use common macro to define resources on dev-audio.c
  ...

1 files changed, 0 insertions, 246 deletions

diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
deleted file mode 100644
index d706838db023..000000000000
--- a/arch/arm/mach-ixp2000/pci.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/pci.c
- *
- * PCI routines for IXDP2400/IXDP2800 boards
- *
- * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
- * Maintained by: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2002 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <asm/mach/pci.h>
-
-static volatile int pci_master_aborts = 0;
-
-static int clear_master_aborts(void);
-
-u32 *
-ixp2000_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
-{
-	u32 *paddress;
-
-	if (PCI_SLOT(devfn) > 7)
-		return 0;
-
-	/* Must be dword aligned */
-	where &= ~3;
-
-	/*
-	 * For top bus, generate type 0, else type 1
-	 */
-	if (!bus_nr) {
-		/* only bits[23:16] are used for IDSEL */
-		paddress = (u32 *) (IXP2000_PCI_CFG0_VIRT_BASE
-				    | (1 << (PCI_SLOT(devfn) + 16))
-				    | (PCI_FUNC(devfn) << 8) | where);
-	} else {
-		paddress = (u32 *) (IXP2000_PCI_CFG1_VIRT_BASE 
-				    | (bus_nr << 16)
-				    | (PCI_SLOT(devfn) << 11)
-				    | (PCI_FUNC(devfn) << 8) | where);
-	}
-
-	return paddress;
-}
-
-/*
- * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
- * 0 and 3 are not valid indexes...
- */
-static u32 bytemask[] = {
-	/*0*/	0,
-	/*1*/	0xff,
-	/*2*/	0xffff,
-	/*3*/	0,
-	/*4*/	0xffffffff,
-};
-
-
-int ixp2000_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 *value)
-{
-	u32 n;
-	u32 *addr;
-
-	n = where % 4;
-
-	addr = ixp2000_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	pci_master_aborts = 0;
-	*value = (*addr >> (8*n)) & bytemask[size];
-	if (pci_master_aborts) {
-		pci_master_aborts = 0;
-		*value = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/*
- * We don't do error checks by calling clear_master_aborts() b/c the
- * assumption is that the caller did a read first to make sure a device
- * exists.
- */
-int ixp2000_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 value)
-{
-	u32 mask;
-	u32 *addr;
-	u32 temp;
-
-	mask = ~(bytemask[size] << ((where % 0x4) * 8));
-	addr = ixp2000_pci_config_addr(bus->number, devfn, where);
-	if (!addr)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	temp = (u32) (value) << ((where % 0x4) * 8);
-	*addr = (*addr & mask) | temp;
-
-	clear_master_aborts();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-
-struct pci_ops ixp2000_pci_ops = {
-	.read	= ixp2000_pci_read_config,
-	.write	= ixp2000_pci_write_config
-};
-
-
-int ixp2000_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-
-	volatile u32 temp;
-	unsigned long flags;
-
-	pci_master_aborts = 1;
-
-	local_irq_save(flags);
-	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
-	}
-
-	temp = *(IXP2000_PCI_CMDSTAT);
-	if (temp & (1 << 29)) {
-		while (temp & (1 << 29)) {	
-			ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
-			temp = *(IXP2000_PCI_CMDSTAT);
-		}
-	}
-	local_irq_restore(flags);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-int
-clear_master_aborts(void)
-{
-	volatile u32 temp;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	temp = *(IXP2000_PCI_CONTROL);
-	if (temp & ((1 << 8) | (1 << 5))) {
-		ixp2000_reg_wrb(IXP2000_PCI_CONTROL, temp);
-	}
-
-	temp = *(IXP2000_PCI_CMDSTAT);
-	if (temp & (1 << 29)) {
-		while (temp & (1 << 29)) {
-			ixp2000_reg_write(IXP2000_PCI_CMDSTAT, temp);
-			temp = *(IXP2000_PCI_CMDSTAT);
-		}
-	}
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-void __init
-ixp2000_pci_preinit(void)
-{
-	pci_set_flags(0);
-
-	pcibios_min_io = 0;
-	pcibios_min_mem = 0;
-
-#ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
-	/*
-	 * Configure the PCI unit to properly byteswap I/O transactions,
-	 * and verify that it worked.
-	 */
-	ixp2000_reg_write(IXP2000_PCI_CONTROL,
-			  (*IXP2000_PCI_CONTROL | PCI_CONTROL_IEE));
-
-	if ((*IXP2000_PCI_CONTROL & PCI_CONTROL_IEE) == 0)
-		panic("IXP2000: PCI I/O is broken on this ixp model, and "
-			"the needed workaround has not been configured in");
-#endif
-
-	hook_fault_code(16+6, ixp2000_pci_abort_handler, SIGBUS, 0,
-				"PCI config cycle to non-existent device");
-}
-
-
-/*
- * IXP2000 systems often have large resource requirements, so we just
- * use our own resource space.
- */
-static struct resource ixp2000_pci_mem_space = {
-	.start	= 0xe0000000,
-	.end	= 0xffffffff,
-	.flags	= IORESOURCE_MEM,
-	.name	= "PCI Mem Space"
-};
-
-static struct resource ixp2000_pci_io_space = {
-	.start	= 0x00010000,
-	.end	= 0x0001ffff,
-	.flags	= IORESOURCE_IO,
-	.name	= "PCI I/O Space"
-};
-
-int ixp2000_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	if (nr >= 1)
-		return 0;
-
-	pci_add_resource_offset(&sys->resources,
-				&ixp2000_pci_io_space, sys->io_offset);
-	pci_add_resource_offset(&sys->resources,
-				&ixp2000_pci_mem_space, sys->mem_offset);
-
-	return 1;
-}
-