From b3b7dab7580982a7d0b55395a8b116808447f85a Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Thu, 29 Nov 2012 18:21:06 -0700 Subject: staging: comedi: addi_apci_2032: move i_APCI2032_ConfigDigitalOutput() For aesthetic reasons, move this function. This function has nothing to do with the digital outputs. It's used to enable the interrupt sources that the board can generate. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/addi_apci_2032.c | 58 ++++++++++++------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'drivers/staging/comedi') diff --git a/drivers/staging/comedi/drivers/addi_apci_2032.c b/drivers/staging/comedi/drivers/addi_apci_2032.c index da0c8ca05ea5..4fb380ad213c 100644 --- a/drivers/staging/comedi/drivers/addi_apci_2032.c +++ b/drivers/staging/comedi/drivers/addi_apci_2032.c @@ -60,35 +60,6 @@ struct apci2032_private { unsigned int wdog_ctrl; }; -static int i_APCI2032_ConfigDigitalOutput(struct comedi_device *dev, - struct comedi_subdevice *s, - struct comedi_insn *insn, - unsigned int *data) -{ - unsigned int ul_Command = 0; - - if ((data[0] != 0) && (data[0] != 1)) { - comedi_error(dev, - "Not a valid Data !!! ,Data should be 1 or 0\n"); - return -EINVAL; - } - - if (data[1] == 1) - ul_Command |= APCI2032_INT_CTRL_VCC_ENA; - else - ul_Command &= ~APCI2032_INT_CTRL_VCC_ENA; - - if (data[2] == 1) - ul_Command |= APCI2032_INT_CTRL_CC_ENA; - else - ul_Command &= ~APCI2032_INT_CTRL_CC_ENA; - - outl(ul_Command, dev->iobase + APCI2032_INT_CTRL_REG); - ui_InterruptData = inl(dev->iobase + APCI2032_INT_CTRL_REG); - - return insn->n; -} - static int apci2032_do_insn_bits(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, @@ -185,6 +156,35 @@ static int apci2032_wdog_insn_read(struct comedi_device *dev, return insn->n; } +static int i_APCI2032_ConfigDigitalOutput(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int ul_Command = 0; + + if ((data[0] != 0) && (data[0] != 1)) { + comedi_error(dev, + "Not a valid Data !!! ,Data should be 1 or 0\n"); + return -EINVAL; + } + + if (data[1] == 1) + ul_Command |= APCI2032_INT_CTRL_VCC_ENA; + else + ul_Command &= ~APCI2032_INT_CTRL_VCC_ENA; + + if (data[2] == 1) + ul_Command |= APCI2032_INT_CTRL_CC_ENA; + else + ul_Command &= ~APCI2032_INT_CTRL_CC_ENA; + + outl(ul_Command, dev->iobase + APCI2032_INT_CTRL_REG); + ui_InterruptData = inl(dev->iobase + APCI2032_INT_CTRL_REG); + + return insn->n; +} + static int i_APCI2032_ReadInterruptStatus(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_insn *insn, -- cgit v1.2.3