From c97ffdbf51ec3f944e6661ecb16985d47c8073c7 Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Thu, 24 Apr 2014 23:19:33 +0200 Subject: NFC: st21nfca: Improved i2c Rx data correctness check A frame starts with ST21NFCA_SOF_EOF(0x7e) + 0x00. A frame ends with ST21NFCA_SOF_EOF(0x7e). It is possible that the i2c macrocell is stopped for other communication interfaces with highest priority(RF or SWP). This can be seen with some 0xFF data at the end of a received shdlc buffer. If this happen we need to discard the frame because the CLF will repeat it. In order to push accurate data to hci layer, we add the following fix: - Instead of looking for the first 0x7e in the frame, check that the last received byte is 0x7e. - Check that the first frame reception block start with start of frame(0x7e 0x00). If not, clear the buffer. - Check that the next frame reception block do not start with start of frame(0x7e). If so, clear the buffer. Signed-off-by: Christophe Ricard Signed-off-by: Samuel Ortiz --- drivers/nfc/st21nfca/i2c.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-) (limited to 'drivers/nfc') diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c index e29351ca7dd1..48f8e23fc321 100644 --- a/drivers/nfc/st21nfca/i2c.c +++ b/drivers/nfc/st21nfca/i2c.c @@ -53,6 +53,8 @@ /* 2 bytes crc + EOF */ #define ST21NFCA_FRAME_TAILROOM 3 +#define IS_START_OF_FRAME(buf) (buf[0] == ST21NFCA_SOF_EOF && \ + buf[1] == 0) #define ST21NFCA_HCI_I2C_DRIVER_NAME "st21nfca_hci_i2c" @@ -361,6 +363,7 @@ static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy, { int r, i; u8 len; + u8 buf[ST21NFCA_HCI_LLC_MAX_PAYLOAD]; struct i2c_client *client = phy->i2c_dev; if (phy->current_read_len < ARRAY_SIZE(len_seq)) { @@ -373,7 +376,7 @@ static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy, */ r = 0; for (i = 0; i < ARRAY_SIZE(wait_tab) && r <= 0; i++) { - r = i2c_master_recv(client, skb_put(skb, len), len); + r = i2c_master_recv(client, buf, len); if (r < 0) msleep(wait_tab[i]); } @@ -383,8 +386,28 @@ static int st21nfca_hci_i2c_read(struct st21nfca_i2c_phy *phy, return -EREMOTEIO; } - if (memchr(skb->data + 2, ST21NFCA_SOF_EOF, - skb->len - 2) != NULL) { + /* + * The first read sequence does not start with SOF. + * Data is corrupeted so we drop it. + */ + if (!phy->current_read_len && buf[0] != ST21NFCA_SOF_EOF) { + skb_trim(skb, 0); + phy->current_read_len = 0; + return -EIO; + } else if (phy->current_read_len && + IS_START_OF_FRAME(buf)) { + /* + * Previous frame transmission was interrupted and + * the frame got repeated. + * Received frame start with ST21NFCA_SOF_EOF + 00. + */ + skb_trim(skb, 0); + phy->current_read_len = 0; + } + + memcpy(skb_put(skb, len), buf, len); + + if (skb->data[skb->len - 1] == ST21NFCA_SOF_EOF) { phy->current_read_len = 0; return st21nfca_hci_i2c_repack(skb); } -- cgit v1.2.3