From dbc04161048dd5e5c3c58546688a0cc0854051e9 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 31 Aug 2012 10:59:07 -0700 Subject: ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi Cc: Jarkko Nikula Cc: Liam Girdwood Acked-by: Wim Van Sebroeck Acked-by: Mark Brown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/include/mach/hardware.h | 285 +++++++++++++++++++++++- arch/arm/mach-omap2/board-3430sdp.c | 1 - arch/arm/mach-omap2/board-4430sdp.c | 2 +- arch/arm/mach-omap2/board-am3517crane.c | 1 - arch/arm/mach-omap2/board-am3517evm.c | 1 - arch/arm/mach-omap2/board-apollon.c | 1 - arch/arm/mach-omap2/board-cm-t3517.c | 1 - arch/arm/mach-omap2/board-devkit8000.c | 3 - arch/arm/mach-omap2/board-flash.c | 1 + arch/arm/mach-omap2/board-generic.c | 1 - arch/arm/mach-omap2/board-h4.c | 3 +- arch/arm/mach-omap2/board-igep0020.c | 1 - arch/arm/mach-omap2/board-ldp.c | 3 - arch/arm/mach-omap2/board-n8x0.c | 1 - arch/arm/mach-omap2/board-omap3beagle.c | 1 - arch/arm/mach-omap2/board-omap3evm.c | 1 - arch/arm/mach-omap2/board-omap3logic.c | 14 +- arch/arm/mach-omap2/board-omap3pandora.c | 1 - arch/arm/mach-omap2/board-omap3stalker.c | 6 +- arch/arm/mach-omap2/board-omap3touchbook.c | 1 - arch/arm/mach-omap2/board-omap4panda.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 - arch/arm/mach-omap2/board-rx51.c | 1 - arch/arm/mach-omap2/board-ti8168evm.c | 1 - arch/arm/mach-omap2/board-zoom-debugboard.c | 4 +- arch/arm/mach-omap2/board-zoom-display.c | 2 +- arch/arm/mach-omap2/board-zoom-peripherals.c | 1 - arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c | 2 +- arch/arm/mach-omap2/clkt_dpll.c | 2 +- arch/arm/mach-omap2/clock.c | 8 +- arch/arm/mach-omap2/clock2420_data.c | 2 +- arch/arm/mach-omap2/clock2430.c | 2 +- arch/arm/mach-omap2/clock2430_data.c | 2 +- arch/arm/mach-omap2/clock2xxx.c | 2 +- arch/arm/mach-omap2/clock3xxx.c | 2 +- arch/arm/mach-omap2/clock3xxx_data.c | 2 +- arch/arm/mach-omap2/clock44xx_data.c | 2 +- arch/arm/mach-omap2/cm2xxx_3xxx.c | 3 +- arch/arm/mach-omap2/common.c | 2 +- arch/arm/mach-omap2/common.h | 6 +- arch/arm/mach-omap2/control.c | 2 +- arch/arm/mach-omap2/devices.c | 1 - arch/arm/mach-omap2/dpll3xxx.c | 2 +- arch/arm/mach-omap2/dpll44xx.c | 2 +- arch/arm/mach-omap2/emu.c | 3 +- arch/arm/mach-omap2/gpmc-nand.c | 3 +- arch/arm/mach-omap2/gpmc-onenand.c | 3 +- arch/arm/mach-omap2/gpmc-smc91x.c | 3 +- arch/arm/mach-omap2/gpmc.c | 4 +- arch/arm/mach-omap2/i2c.c | 1 - arch/arm/mach-omap2/id.c | 2 +- arch/arm/mach-omap2/include/mach/hardware.h | 2 - arch/arm/mach-omap2/io.c | 3 +- arch/arm/mach-omap2/irq.c | 3 +- arch/arm/mach-omap2/mailbox.c | 3 +- arch/arm/mach-omap2/mcbsp.c | 1 - arch/arm/mach-omap2/omap-smp.c | 2 +- arch/arm/mach-omap2/omap-wakeupgen.c | 2 +- arch/arm/mach-omap2/omap4-common.c | 2 +- arch/arm/mach-omap2/omap_hwmod.c | 8 +- arch/arm/mach-omap2/omap_hwmod_2420_data.c | 1 - arch/arm/mach-omap2/omap_hwmod_2430_data.c | 5 +- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 +- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 1 - arch/arm/mach-omap2/omap_l3_noc.c | 3 +- arch/arm/mach-omap2/omap_phy_internal.c | 2 +- arch/arm/mach-omap2/opp2420_data.c | 2 +- arch/arm/mach-omap2/opp2430_data.c | 2 +- arch/arm/mach-omap2/opp3xxx_data.c | 2 - arch/arm/mach-omap2/opp4xxx_data.c | 3 +- arch/arm/mach-omap2/powerdomain.c | 6 +- arch/arm/mach-omap2/powerdomains3xxx_data.c | 4 +- arch/arm/mach-omap2/prm2xxx_3xxx.c | 4 +- arch/arm/mach-omap2/prm44xx.c | 3 +- arch/arm/mach-omap2/sdrc2xxx.c | 2 +- arch/arm/mach-omap2/sleep34xx.S | 2 +- arch/arm/mach-omap2/soc.h | 6 + arch/arm/mach-omap2/sram242x.S | 3 +- arch/arm/mach-omap2/sram243x.S | 3 +- arch/arm/mach-omap2/sram34xx.S | 3 +- arch/arm/mach-omap2/timer.c | 3 +- arch/arm/mach-omap2/twl-common.c | 2 +- arch/arm/mach-omap2/usb-host.c | 1 - arch/arm/mach-omap2/usb-musb.c | 6 +- arch/arm/mach-omap2/vc.c | 3 +- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 3 +- arch/arm/plat-omap/counter_32k.c | 2 - arch/arm/plat-omap/dma.c | 3 +- arch/arm/plat-omap/include/plat/cpu.h | 3 + arch/arm/plat-omap/include/plat/hardware.h | 293 ------------------------- arch/arm/plat-omap/include/plat/omap4-keypad.h | 2 + arch/arm/plat-omap/include/plat/omap44xx.h | 1 - 92 files changed, 384 insertions(+), 429 deletions(-) delete mode 100644 arch/arm/plat-omap/include/plat/hardware.h (limited to 'arch') diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h index 01e35fa106b8..bd3b95e1cb02 100644 --- a/arch/arm/mach-omap1/include/mach/hardware.h +++ b/arch/arm/mach-omap1/include/mach/hardware.h @@ -1,11 +1,46 @@ /* * arch/arm/mach-omap1/include/mach/hardware.h + * + * Hardware definitions for TI OMAP processors and boards + * + * NOTE: Please put device driver specific defines into a separate header + * file for each driver. + * + * Copyright (C) 2001 RidgeRun, Inc. + * Author: RidgeRun, Inc. Greg Lonnon + * + * Reorganized for Linux-2.6 by Tony Lindgren + * and Dirk Behme + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H +#ifndef __ASM_ARCH_OMAP_HARDWARE_H +#define __ASM_ARCH_OMAP_HARDWARE_H +#include #ifndef __ASSEMBLER__ +#include +#include + /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -35,7 +70,249 @@ static inline u32 omap_cs3_phys(void) ? 0 : OMAP_CS3_PHYS; } +#endif /* ifndef __ASSEMBLER__ */ + +#include + +/* + * --------------------------------------------------------------------------- + * Common definitions for all OMAP processors + * NOTE: Put all processor or board specific parts to the special header + * files. + * --------------------------------------------------------------------------- + */ + +/* + * ---------------------------------------------------------------------------- + * Timers + * ---------------------------------------------------------------------------- + */ +#define OMAP_MPU_TIMER1_BASE (0xfffec500) +#define OMAP_MPU_TIMER2_BASE (0xfffec600) +#define OMAP_MPU_TIMER3_BASE (0xfffec700) +#define MPU_TIMER_FREE (1 << 6) +#define MPU_TIMER_CLOCK_ENABLE (1 << 5) +#define MPU_TIMER_AR (1 << 1) +#define MPU_TIMER_ST (1 << 0) + +/* + * ---------------------------------------------------------------------------- + * Clocks + * ---------------------------------------------------------------------------- + */ +#define CLKGEN_REG_BASE (0xfffece00) +#define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) +#define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) +#define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) +#define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) +#define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) +#define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) +#define ARM_SYSST (CLKGEN_REG_BASE + 0x18) +#define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) + +#define CK_RATEF 1 +#define CK_IDLEF 2 +#define CK_ENABLEF 4 +#define CK_SELECTF 8 +#define SETARM_IDLE_SHIFT + +/* DPLL control registers */ +#define DPLL_CTL (0xfffecf00) + +/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ +#define DSP_CONFIG_REG_BASE IOMEM(0xe1008000) +#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) +#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) +#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) +#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) + +/* + * --------------------------------------------------------------------------- + * UPLD + * --------------------------------------------------------------------------- + */ +#define ULPD_REG_BASE (0xfffe0800) +#define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) +#define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) +#define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) +# define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ +# define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ +#define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) +# define SOFT_UDC_REQ (1 << 4) +# define SOFT_USB_CLK_REQ (1 << 3) +# define SOFT_DPLL_REQ (1 << 0) +#define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) +#define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) +#define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) +#define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) +#define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) +# define DIS_MMC2_DPLL_REQ (1 << 11) +# define DIS_MMC1_DPLL_REQ (1 << 10) +# define DIS_UART3_DPLL_REQ (1 << 9) +# define DIS_UART2_DPLL_REQ (1 << 8) +# define DIS_UART1_DPLL_REQ (1 << 7) +# define DIS_USB_HOST_DPLL_REQ (1 << 6) +#define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) +#define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) + +/* + * --------------------------------------------------------------------------- + * Watchdog timer + * --------------------------------------------------------------------------- + */ + +/* Watchdog timer within the OMAP3.2 gigacell */ +#define OMAP_MPU_WATCHDOG_BASE (0xfffec800) +#define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) +#define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) +#define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) + +/* + * --------------------------------------------------------------------------- + * Interrupts + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_ARCH_OMAP1 + +/* + * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c + * or something similar.. -- PFM. + */ + +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 + +#define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) +#define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) +#define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) +#define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) +#define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) +#define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) +#define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) + +#define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) +#define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) +#define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) +#define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) +#define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) +#define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) +#define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) + +#define IRQ_ITR_REG_OFFSET 0x00 +#define IRQ_MIR_REG_OFFSET 0x04 +#define IRQ_SIR_IRQ_REG_OFFSET 0x10 +#define IRQ_SIR_FIQ_REG_OFFSET 0x14 +#define IRQ_CONTROL_REG_OFFSET 0x18 +#define IRQ_ISR_REG_OFFSET 0x9c +#define IRQ_ILR0_REG_OFFSET 0x1c +#define IRQ_GMR_REG_OFFSET 0xa0 + #endif -#endif -#include +/* + * ---------------------------------------------------------------------------- + * System control registers + * ---------------------------------------------------------------------------- + */ +#define MOD_CONF_CTRL_0 0xfffe1080 +#define MOD_CONF_CTRL_1 0xfffe1110 + +/* + * ---------------------------------------------------------------------------- + * Pin multiplexing registers + * ---------------------------------------------------------------------------- + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define PULL_DWN_CTRL_4 0xfffe10ac + +/* OMAP-1610 specific multiplexing registers */ +#define FUNC_MUX_CTRL_E 0xfffe1090 +#define FUNC_MUX_CTRL_F 0xfffe1094 +#define FUNC_MUX_CTRL_10 0xfffe1098 +#define FUNC_MUX_CTRL_11 0xfffe109c +#define FUNC_MUX_CTRL_12 0xfffe10a0 +#define PU_PD_SEL_0 0xfffe10b4 +#define PU_PD_SEL_1 0xfffe10b8 +#define PU_PD_SEL_2 0xfffe10bc +#define PU_PD_SEL_3 0xfffe10c0 +#define PU_PD_SEL_4 0xfffe10c4 + +/* Timer32K for 1610 and 1710*/ +#define OMAP_TIMER32K_BASE 0xFFFBC400 + +/* + * --------------------------------------------------------------------------- + * TIPB bus interface + * --------------------------------------------------------------------------- + */ +#define TIPB_PUBLIC_CNTL_BASE 0xfffed300 +#define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) +#define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 +#define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) + +/* + * ---------------------------------------------------------------------------- + * MPUI interface + * ---------------------------------------------------------------------------- + */ +#define MPUI_BASE (0xfffec900) +#define MPUI_CTRL (MPUI_BASE + 0x0) +#define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) +#define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) +#define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) +#define MPUI_STATUS_REG (MPUI_BASE + 0x10) +#define MPUI_DSP_STATUS (MPUI_BASE + 0x14) +#define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) +#define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) + +/* + * ---------------------------------------------------------------------------- + * LED Pulse Generator + * ---------------------------------------------------------------------------- + */ +#define OMAP_LPG1_BASE 0xfffbd000 +#define OMAP_LPG2_BASE 0xfffbd800 +#define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) +#define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) +#define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) +#define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) + +/* + * ---------------------------------------------------------------------------- + * Pulse-Width Light + * ---------------------------------------------------------------------------- + */ +#define OMAP_PWL_BASE 0xfffb5800 +#define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) +#define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) + +/* + * --------------------------------------------------------------------------- + * Processor specific defines + * --------------------------------------------------------------------------- + */ + +#include +#include +#include + +#endif /* __ASM_ARCH_OMAP_HARDWARE_H */ diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index c843d01aedda..5453173ff57b 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -25,7 +25,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 31456eae7808..db43e22526c0 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -28,7 +28,6 @@ #include #include -#include #include #include #include @@ -44,6 +43,7 @@ #include #include +#include "soc.h" #include "mux.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index de92b0860698..318feadb1d6e 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -21,7 +21,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index f8bc86029bdc..403d048a00ee 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -27,7 +27,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index a6a1b481cac1..3e2d76f05af4 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -29,7 +29,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 20fe233924ed..27a5450751ed 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -42,7 +42,6 @@ #include #include #include -#include #include diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 9032807702b5..18b63ad56274 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -32,8 +32,6 @@ #include #include - -#include #include #include #include @@ -55,7 +53,6 @@ #include #include "sdram-micron-mt46h32m32lf-6.h" - #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 901fa1f12409..9017813f9abc 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -23,6 +23,7 @@ #include #include +#include "common.h" #include "board-flash.h" #define REG_FPGA_REV 0x10 diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 38024a57f6bf..2ea7c577b295 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -16,7 +16,6 @@ #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 5be30e6dd4cb..12569cb0eddd 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,12 +27,10 @@ #include #include -#include #include #include #include -#include "common.h" #include #include #include @@ -41,6 +39,7 @@ #include