From 867e359b97c970a60626d5d76bbe2a8fadbf38fb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 28 May 2010 23:09:12 -0400 Subject: arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf Acked-by: Arnd Bergmann Acked-by: FUJITA Tomonori Reviewed-by: Paul Mundt --- arch/tile/Kconfig | 352 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 352 insertions(+) create mode 100644 arch/tile/Kconfig (limited to 'arch/tile/Kconfig') diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig new file mode 100644 index 000000000000..290ef4161939 --- /dev/null +++ b/arch/tile/Kconfig @@ -0,0 +1,352 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/config-language.txt. + +config MMU + def_bool y + +config GENERIC_CSUM + def_bool y + +config GENERIC_HARDIRQS + def_bool y + +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + +config GENERIC_IRQ_PROBE + def_bool y + +config GENERIC_PENDING_IRQ + def_bool y + depends on GENERIC_HARDIRQS && SMP + +config SEMAPHORE_SLEEPERS + def_bool y + +config HAVE_ARCH_ALLOC_REMAP + def_bool y + +config HAVE_SETUP_PER_CPU_AREA + def_bool y + +config NEED_PER_CPU_PAGE_FIRST_CHUNK + def_bool y + +config SYS_SUPPORTS_HUGETLBFS + def_bool y + +config GENERIC_TIME + def_bool y + +config GENERIC_CLOCKEVENTS + def_bool y + +# FIXME: tilegx can implement a more efficent rwsem. +config RWSEM_GENERIC_SPINLOCK + def_bool y + +# We have a very flat architecture from a migration point of view, +# so save boot time by presetting this (particularly useful on tile-sim). +config DEFAULT_MIGRATION_COST + int + default "10000000" + +# We only support gcc 4.4 and above, so this should work. +config ARCH_SUPPORTS_OPTIMIZED_INLINING + def_bool y + +config ARCH_PHYS_ADDR_T_64BIT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + select STACKTRACE + +# We use discontigmem for now; at some point we may want to switch +# to sparsemem (Tilera bug 7996). +config ARCH_DISCONTIGMEM_ENABLE + def_bool y + +config ARCH_DISCONTIGMEM_DEFAULT + def_bool y + +config TRACE_IRQFLAGS_SUPPORT + def_bool y + +config STRICT_DEVMEM + def_bool y + +# SMP is required for Tilera Linux. +config SMP + def_bool y + +# Allow checking for compile-time determined overflow errors in +# copy_from_user(). There are still unprovable places in the +# generic code as of 2.6.34, so this option is not really compatible +# with -Werror, which is more useful in general. +config DEBUG_COPY_FROM_USER + def_bool n + +config HVC_TILE + select HVC_DRIVER + def_bool y + +config TILE + def_bool y + select GENERIC_FIND_FIRST_BIT + select GENERIC_FIND_NEXT_BIT + select USE_GENERIC_SMP_HELPERS + select CC_OPTIMIZE_FOR_SIZE + +# FIXME: investigate whether we need/want these options. +# select HAVE_IOREMAP_PROT +# select HAVE_OPTPROBES +# select HAVE_REGS_AND_STACK_ACCESS_API +# select HAVE_HW_BREAKPOINT +# select PERF_EVENTS +# select HAVE_USER_RETURN_NOTIFIER +# config NO_BOOTMEM +# config ARCH_SUPPORTS_DEBUG_PAGEALLOC +# config HUGETLB_PAGE_SIZE_VARIABLE + + +mainmenu "Linux/TILE Kernel Configuration" + +# Please note: TILE-Gx support is not yet finalized; this is +# the preliminary support. TILE-Gx drivers are only provided +# with the alpha or beta test versions for Tilera customers. +config TILEGX + depends on EXPERIMENTAL + bool "Building with TILE-Gx (64-bit) compiler and toolchain" + +config 64BIT + depends on TILEGX + def_bool y + +config ARCH_DEFCONFIG + string + default "arch/tile/configs/tile_defconfig" if !TILEGX + default "arch/tile/configs/tilegx_defconfig" if TILEGX + +source "init/Kconfig" + +menu "Tilera-specific configuration" + +config NR_CPUS + int "Maximum number of tiles (2-255)" + range 2 255 + depends on SMP + default "64" + ---help--- + Building with 64 is the recommended value, but a slightly + smaller kernel memory footprint results from using a smaller + value on chips with fewer tiles. + +source "kernel/time/Kconfig" + +source "kernel/Kconfig.hz" + +config KEXEC + bool "kexec system call" + ---help--- + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. It is used + to implement the "mboot" Tilera booter. + + The name comes from the similarity to the exec system call. + +config COMPAT + bool "Support 32-bit TILE-Gx binaries in addition to 64-bit" + depends on TILEGX + select COMPAT_BINFMT_ELF + default y + ---help--- + If enabled, the kernel will support running TILE-Gx binaries + that were built with the -m32 option. + +config SYSVIPC_COMPAT + def_bool y + depends on COMPAT && SYSVIPC + +# We do not currently support disabling HIGHMEM on tile64 and tilepro. +config HIGHMEM + bool # "Support for more than 512 MB of RAM" + default !TILEGX + ---help--- + Linux can use the full amount of RAM in the system by + default. However, the address space of TILE processors is + only 4 Gigabytes large. That means that, if you have a large + amount of physical memory, not all of it can be "permanently + mapped" by the kernel. The physical memory that's not + permanently mapped is called "high memory". + + If you are compiling a kernel which will never run on a + machine with more than 512 MB total physical RAM, answer + "false" here. This will result in the kernel mapping all of + physical memory into the top 1 GB of virtual memory space. + + If unsure, say "true". + +# We do not currently support disabling NUMA. +config NUMA + bool # "NUMA Memory Allocation and Scheduler Support" + depends on SMP && DISCONTIGMEM + default y + ---help--- + NUMA memory allocation is required for TILE processors + unless booting with memory striping enabled in the + hypervisor, or with only a single memory controller. + It is recommended that this option always be enabled. + +config NODES_SHIFT + int "Log base 2 of the max number of memory controllers" + default 2 + depends on NEED_MULTIPLE_NODES + ---help--- + By default, 2, i.e. 2^2 == 4 DDR2 controllers. + In a system with more controllers, this value should be raised. + +# Need 16MB areas to enable hugetlb +# See build-time check in arch/tile/mm/init.c. +config FORCE_MAX_ZONEORDER + int + default 9 + +choice + depends on !TILEGX + prompt "Memory split" if EMBEDDED + default VMSPLIT_3G + ---help--- + Select the desired split between kernel and user memory. + + If the address range available to the kernel is less than the + physical memory installed, the remaining memory will be available + as "high memory". Accessing high memory is a little more costly + than low memory, as it needs to be mapped into the kernel first. + Note that increasing the kernel address space limits the range + available to user programs, making the address space there + tighter. Selecting anything other than the default 3G/1G split + will also likely make your kernel incompatible with binary-only + kernel modules. + + If you are not absolutely sure what you are doing, leave this + option alone! + + config VMSPLIT_375G + bool "3.75G/0.25G user/kernel split (no kernel networking)" + config VMSPLIT_35G + bool "3.5G/0.5G user/kernel split" + config VMSPLIT_3G + bool "3G/1G user/kernel split" + config VMSPLIT_3G_OPT + bool "3G/1G user/kernel split (for full 1G low memory)" + config VMSPLIT_2G + bool "2G/2G user/kernel split" + config VMSPLIT_1G + bool "1G/3G user/kernel split" +endchoice + +config PAGE_OFFSET + hex + default 0xF0000000 if VMSPLIT_375G + default 0xE0000000 if VMSPLIT_35G + default 0xB0000000 if VMSPLIT_3G_OPT + default 0x80000000 if VMSPLIT_2G + default 0x40000000 if VMSPLIT_1G + default 0xC0000000 + +source "mm/Kconfig" + +config CMDLINE_BOOL + bool "Built-in kernel command line" + default n + ---help--- + Allow for specifying boot arguments to the kernel at + build time. On some systems (e.g. embedded ones), it is + necessary or convenient to provide some or all of the + kernel boot arguments with the kernel itself (that is, + to not rely on the boot loader to provide them.) + + To compile command line arguments into the kernel, + set this option to 'Y', then fill in the + the boot arguments in CONFIG_CMDLINE. + + Systems with fully functional boot loaders (e.g. mboot, or + if booting over PCI) should leave this option set to 'N'. + +config CMDLINE + string "Built-in kernel command string" + depends on CMDLINE_BOOL + default "" + ---help--- + Enter arguments here that should be compiled into the kernel + image and used at boot time. If the boot loader provides a + command line at boot time, it is appended to this string to + form the full kernel command line, when the system boots. + + However, you can use the CONFIG_CMDLINE_OVERRIDE option to + change this behavior. + + In most cases, the command line (whether built-in or provided + by the boot loader) should specify the device for the root + file system. + +config CMDLINE_OVERRIDE + bool "Built-in command line overrides boot loader arguments" + default n + depends on CMDLINE_BOOL + ---help--- + Set this option to 'Y' to have the kernel ignore the boot loader + command line, and use ONLY the built-in command line. + + This is used to work around broken boot loaders. This should + be set to 'N' under normal conditions. + +config VMALLOC_RESERVE + hex + default 0x1000000 + +endmenu # Tilera-specific configuration + +menu "Bus options" + +config NO_IOMEM + def_bool !PCI + +config NO_IOPORT + def_bool !PCI + +source "drivers/pci/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Executable file formats" + +# only elf supported +config KCORE_ELF + def_bool y + depends on PROC_FS + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/tile/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" -- cgit v1.2.3