From cbd006cb7d4e7b76c6febf7f51e970bced132914 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 24 Nov 2010 06:01:30 +0000 Subject: e1000e: 82577/8 must acquire h/w semaphore before workaround The workaround function e1000_configure_k1_pchlan() assumes the h/w semaphore is already acquired. This was originally missed when setting up the part for the ethtool loopback test. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/ethtool.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 5c6bc6ac069c..c10dc694d733 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1249,6 +1249,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) u32 ctrl_reg = 0; u32 stat_reg = 0; u16 phy_reg = 0; + s32 ret_val = 0; hw->mac.autoneg = 0; @@ -1308,7 +1309,13 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) case e1000_phy_82577: case e1000_phy_82578: /* Workaround: K1 must be disabled for stable 1Gbps operation */ + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) { + e_err("Cannot setup 1Gbps loopback.\n"); + return ret_val; + } e1000_configure_k1_ich8lan(hw, false); + hw->phy.ops.release(hw); break; case e1000_phy_82579: /* Disable PHY energy detect power down */ -- cgit v1.2.3