summaryrefslogtreecommitdiff
path: root/mm
AgeCommit message (Collapse)AuthorFilesLines
2013-08-23memcg: get rid of swapaccount leftoversMichal Hocko1-1/+0
The swapaccount kernel parameter without any values has been removed by commit a2c8990aed5a ("memsw: remove noswapaccount kernel parameter") but it seems that we didn't get rid of all the left overs. Make sure that menuconfig help text and kernel-parameters.txt are clear about value for the paramter and remove the stalled comment which is not very much useful on its own. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Gergely Risko <gergely@risko.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-16Fix TLB gather virtual address range invalidation corner casesLinus Torvalds3-18/+24
Ben Tebulin reported: "Since v3.7.2 on two independent machines a very specific Git repository fails in 9/10 cases on git-fsck due to an SHA1/memory failures. This only occurs on a very specific repository and can be reproduced stably on two independent laptops. Git mailing list ran out of ideas and for me this looks like some very exotic kernel issue" and bisected the failure to the backport of commit 53a59fc67f97 ("mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT"). That commit itself is not actually buggy, but what it does is to make it much more likely to hit the partial TLB invalidation case, since it introduces a new case in tlb_next_batch() that previously only ever happened when running out of memory. The real bug is that the TLB gather virtual memory range setup is subtly buggered. It was introduced in commit 597e1c3580b7 ("mm/mmu_gather: enable tlb flush range in generic mmu_gather"), and the range handling was already fixed at least once in commit e6c495a96ce0 ("mm: fix the TLB range flushed when __tlb_remove_page() runs out of slots"), but that fix was not complete. The problem with the TLB gather virtual address range is that it isn't set up by the initial tlb_gather_mmu() initialization (which didn't get the TLB range information), but it is set up ad-hoc later by the functions that actually flush the TLB. And so any such case that forgot to update the TLB range entries would potentially miss TLB invalidates. Rather than try to figure out exactly which particular ad-hoc range setup was missing (I personally suspect it's the hugetlb case in zap_huge_pmd(), which didn't have the same logic as zap_pte_range() did), this patch just gets rid of the problem at the source: make the TLB range information available to tlb_gather_mmu(), and initialize it when initializing all the other tlb gather fields. This makes the patch larger, but conceptually much simpler. And the end result is much more understandable; even if you want to play games with partial ranges when invalidating the TLB contents in chunks, now the range information is always there, and anybody who doesn't want to bother with it won't introduce subtle bugs. Ben verified that this fixes his problem. Reported-bisected-and-tested-by: Ben Tebulin <tebulin@googlemail.com> Build-testing-by: Stephen Rothwell <sfr@canb.auug.org.au> Build-testing-by: Richard Weinberger <richard.weinberger@gmail.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13mm: save soft-dirty bits on file pagesCyrill Gorcunov3-8/+22
Andy reported that if file page get reclaimed we lose the soft-dirty bit if it was there, so save _PAGE_BIT_SOFT_DIRTY bit when page address get encoded into pte entry. Thus when #pf happens on such non-present pte we can restore it back. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13mm: save soft-dirty bits on swapped pagesCyrill Gorcunov3-3/+24
Andy Lutomirski reported that if a page with _PAGE_SOFT_DIRTY bit set get swapped out, the bit is getting lost and no longer available when pte read back. To resolve this we introduce _PTE_SWP_SOFT_DIRTY bit which is saved in pte entry for the page being swapped out. When such page is to be read back from a swap cache we check for bit presence and if it's there we clear it and restore the former _PAGE_SOFT_DIRTY bit back. One of the problem was to find a place in pte entry where we can save the _PTE_SWP_SOFT_DIRTY bit while page is in swap. The _PAGE_PSE was chosen for that, it doesn't intersect with swap entry format stored in pte. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-13memcg: don't initialize kmem-cache destroying work for root cachesAndrey Vagin1-2/+2
struct memcg_cache_params has a union. Different parts of this union are used for root and non-root caches. A part with destroying work is used only for non-root caches. I fixed the same problem in another place v3.9-rc1-16204-gf101a94, but didn't notice this one. This patch fixes the kernel panic: [ 46.848187] BUG: unable to handle kernel paging request at 000000fffffffeb8 [ 46.849026] IP: [<ffffffff811a484c>] kmem_cache_destroy_memcg_children+0x6c/0xc0 [ 46.849092] PGD 0 [ 46.849092] Oops: 0000 [#1] SMP ... Signed-off-by: Andrey Vagin <avagin@openvz.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@vger.kernel.org> [3.9.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-08Revert "slub: do not put a slab to cpu partial list when cpu_partial is 0"Linus Torvalds1-3/+0
This reverts commit 318df36e57c0ca9f2146660d41ff28e8650af423. This commit caused Steven Rostedt's hackbench runs to run out of memory due to a leak. As noted by Joonsoo Kim, it is buggy in the following scenario: "I guess, you may set 0 to all kmem caches's cpu_partial via sysfs, doesn't it? In this case, memory leak is possible in following case. Code flow of possible leak is follwing case. * in __slab_free() 1. (!new.inuse || !prior) && !was_frozen 2. !kmem_cache_debug && !prior 3. new.frozen = 1 4. after cmpxchg_double_slab, run the (!n) case with new.frozen=1 5. with this patch, put_cpu_partial() doesn't do anything, because this cache's cpu_partial is 0 6. return In step 5, leak occur" And Steven does indeed have cpu_partial set to 0 due to RT testing. Joonsoo is cooking up a patch, but everybody agrees that reverting this for now is the right thing to do. Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-04tmpfs: fix SEEK_DATA/SEEK_HOLE regressionHugh Dickins1-1/+2
Commit 46a1c2c7ae53 ("vfs: export lseek_execute() to modules") broke the tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts the carefully prepared -ENXIO to -EINVAL. Other filesystems avoid it in error cases: do the same in tmpfs. Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31vmpressure: make sure there are no events queued after memcg is offlinedMichal Hocko2-0/+17
vmpressure is called synchronously from reclaim where the target_memcg is guaranteed to be alive but the eventfd is signaled from the work queue context. This means that memcg (along with vmpressure structure which is embedded into it) might go away while the work item is pending which would result in use-after-release bug. We have two possible ways how to fix this. Either vmpressure pins memcg before it schedules vmpr->work and unpin it in vmpressure_work_fn or explicitely flush the work item from the css_offline context (as suggested by Tejun). This patch implements the later one and it introduces vmpressure_cleanup which flushes the vmpressure work queue item item. It hooks into mem_cgroup_css_offline after the memcg itself is cleaned up. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Li Zefan <lizefan@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31vmpressure: do not check for pending work to prevent from new workMichal Hocko1-1/+1
because it is racy and it doesn't give us much anyway as schedule_work handles this case already. Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Li Zefan <lizefan@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31vmpressure: change vmpressure::sr_lock to spinlockMichal Hocko1-5/+5
There is nothing that can sleep inside critical sections protected by this lock and those sections are really small so there doesn't make much sense to use mutex for them. Change the log to a spinlock Signed-off-by: Michal Hocko <mhocko@suse.cz> Reported-by: Tejun Heo <tj@kernel.org> Cc: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Li Zefan <lizefan@huawei.com> Reviewed-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm: zbud: fix condition check on allocation sizeHeesub Shin1-1/+1
zbud_alloc() incorrectly verifies the size of allocation limit. It should deny the allocation request greater than (PAGE_SIZE - ZHDR_SIZE_ALIGNED - CHUNK_SIZE), not (PAGE_SIZE - ZHDR_SIZE_ALIGNED) which has no remaining spaces for its buddy. There is no point in spending the entire zbud page storing only a single page, since we don't have any benefits. Signed-off-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunae Seo <sunae.seo@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31thp, mm: avoid PageUnevictable on active/inactive lru listsKirill A. Shutemov2-19/+5
active/inactive lru lists can contain unevicable pages (i.e. ramfs pages that have been placed on the LRU lists when first allocated), but these pages must not have PageUnevictable set - otherwise shrink_[in]active_list goes crazy: kernel BUG at /home/space/kas/git/public/linux-next/mm/vmscan.c:1122! 1090 static unsigned long isolate_lru_pages(unsigned long nr_to_scan, 1091 struct lruvec *lruvec, struct list_head *dst, 1092 unsigned long *nr_scanned, struct scan_control *sc, 1093 isolate_mode_t mode, enum lru_list lru) 1094 { ... 1108 switch (__isolate_lru_page(page, mode)) { 1109 case 0: ... 1116 case -EBUSY: ... 1121 default: 1122 BUG(); 1123 } 1124 } ... 1130 } __isolate_lru_page() returns EINVAL for PageUnevictable(page). For lru_add_page_tail(), it means we should not set PageUnevictable() for tail pages unless we're sure that it will go to LRU_UNEVICTABLE. Let's just copy PG_active and PG_unevictable from head page in __split_huge_page_refcount(), it will simplify lru_add_page_tail(). This will fix one more bug in lru_add_page_tail(): if page_evictable(page_tail) is false and PageLRU(page) is true, page_tail will go to the same lru as page, but nobody cares to sync page_tail active/inactive state with page. So we can end up with inactive page on active lru. The patch will fix it as well since we copy PG_active from head page. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm/swap.c: clear PageActive before adding pages onto unevictable listNaoya Horiguchi1-7/+2
As a result of commit 13f7f78981e4 ("mm: pagevec: defer deciding which LRU to add a page to until pagevec drain time"), pages on unevictable lists can have both of PageActive and PageUnevictable set. This is not only confusing, but also corrupts page migration and shrink_[in]active_list. This patch fixes the problem by adding ClearPageActive before adding pages into unevictable list. It also cleans up VM_BUG_ONs. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-31mm: mempolicy: fix mbind_range() && vma_adjust() interactionOleg Nesterov2-2/+6
vma_adjust() does vma_set_policy(vma, vma_policy(next)) and this is doubly wrong: 1. This leaks vma->vm_policy if it is not NULL and not equal to next->vm_policy. This can happen if vma_merge() expands "area", not prev (case 8). 2. This sets the wrong policy if vma_merge() joins prev and area, area is the vma the caller needs to update and it still has the old policy. Revert commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy") which introduced these problems. Change mbind_range() to recheck mpol_equal() after vma_merge() to fix the problem that commit tried to address. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Steven T Hampson <steven.t.hampson@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-18Merge tag 'driver-core-3.11-rc2' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg KH: "Here are some driver core patches for 3.11-rc2. They aren't really bugfixes, but a bunch of new helper macros for drivers to properly create attribute groups, which drivers and subsystems need to fix up a ton of race issues with incorrectly creating sysfs files (binary and normal) after userspace has been told that the device is present. Also here is the ability to create binary files as attribute groups, to solve that race condition, which was impossible to do before this, so that's my fault the drivers were broken. The majority of the .c changes is indenting and moving code around a bit. It affects no existing code, but allows the large backlog of 70+ patches that I already have created to start flowing into the different subtrees, instead of having to live in my driver-core tree, causing merge nightmares in linux-next for the next few months. These were finalized too late for the -rc1 merge window, which is why they were didn't make that pull request, testing and review from others didn't happen until a few weeks ago, and then there's the whole distraction of the past few days, which prevented these from getting to you sooner, sorry about that. Oh, and there's a bugfix for the documentation build warning in here as well. All of these have been in linux-next this week, with no reported problems" * tag 'driver-core-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver-core: fix new kernel-doc warning in base/platform.c sysfs: use file mode defines from stat.h sysfs: add more helper macro's for (bin_)attribute(_groups) driver core: add default groups to struct class driver core: Introduce device_create_groups sysfs: prevent warning when only using binary attributes sysfs: add support for binary attributes in groups driver core: device.h: add RW and RO attribute macros sysfs.h: add BIN_ATTR macro sysfs.h: add ATTRIBUTE_GROUPS() macro sysfs.h: add __ATTR_RW() macro
2013-07-16sysfs.h: add __ATTR_RW() macroGreg Kroah-Hartman1-2/+0
A number of parts of the kernel created their own version of this, might as well have the sysfs core provide it instead. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-14kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker5-13/+13
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14Merge branch 'slab/for-linus' of ↵Linus Torvalds5-46/+68
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull slab update from Pekka Enberg: "Highlights: - Fix for boot-time problems on some architectures due to init_lock_keys() not respecting kmalloc_caches boundaries (Christoph Lameter) - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim) - Fix for excessive slab freelist draining (Wanpeng Li) - SLUB and SLOB cleanups and fixes (various people)" I ended up editing the branch, and this avoids two commits at the end that were immediately reverted, and I instead just applied the oneliner fix in between myself. * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux slub: Check for page NULL before doing the node_match check mm/slab: Give s_next and s_stop slab-specific names slob: Check for NULL pointer before calling ctor() slub: Make cpu partial slab support configurable slab: add kmalloc() to kernel API documentation slab: fix init_lock_keys slob: use DIV_ROUND_UP where possible slub: do not put a slab to cpu partial list when cpu_partial is 0 mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo mm/slub: Drop unnecessary nr_partials mm/slab: Fix /proc/slabinfo unwriteable for slab mm/slab: Sharing s_next and s_stop between slab and slub mm/slab: Fix drain freelist excessively slob: Rework #ifdeffery in slab.h mm, slab: moved kmem_cache_alloc_node comment to correct place
2013-07-14slub: Check for page NULL before doing the node_match checkSteven Rostedt1-1/+1
In the -rt kernel (mrg), we hit the following dump: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 PGD a2d39067 PUD b1641067 PMD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod CPU 3 Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992 RIP: 0010:[<ffffffff811573f1>] [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP: 0018:ffff8800a9b17d70 EFLAGS: 00010213 RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000 RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500 RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500 R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000) Stack: ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011 0000000001200011 0000000001200011 0000000000000000 0000000000000000 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd Call Trace: [<ffffffff81202e08>] ? current_has_perm+0x68/0x80 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30 [<ffffffff8104369a>] do_fork+0x5a/0x360 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220 [<ffffffff8100b068>] sys_clone+0x28/0x30 [<ffffffff81527423>] stub_clone+0x13/0x20 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2 RIP [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180 RSP <ffff8800a9b17d70> CR2: 0000000000000000 ---[ end trace 0000000000000002 ]--- Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do disable migration. But the SLUB code is relatively lockless, and the spin_locks there are raw_spin_locks (not converted to mutexes), thus I believe this bug can happen in mainline without -rt features. The -rt patch is just good at triggering mainline bugs ;-) Anyway, looking at where this crashed, it seems that the page variable can be NULL when passed to the node_match() function (which does not check if it is NULL). When this happens we get the above panic. As page is only used in slab_alloc() to check if the node matches, if it's NULL I'm assuming that we can say it doesn't and call the __slab_alloc() code. Is this a correct assumption? Acked-by: Christoph Lameter <cl@linux.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10mm: remove free_area_cacheMichel Lespinasse3-33/+0
Since all architectures have been converted to use vm_unmapped_area(), there is no remaining use for the free_area_cache. Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10zswap: add to mm/Seth Jennings3-0/+964
zswap is a thin backend for frontswap that takes pages that are in the process of being swapped out and attempts to compress them and store them in a RAM-based memory pool. This can result in a significant I/O reduction on the swap device and, in the case where decompressing from RAM is faster than reading from the swap device, can also improve workload performance. It also has support for evicting swap pages that are currently compressed in zswap to the swap device on an LRU(ish) basis. This functionality makes zswap a true cache in that, once the cache is full, the oldest pages can be moved out of zswap to the swap device so newer pages can be compressed and stored in zswap. This patch adds the zswap driver to mm/ Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Jenifer Hopper <jhopper@us.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Joe Perches <joe@perches.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Hugh Dickens <hughd@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10zbud: add to mm/Seth Jennings3-0/+538
zbud is an special purpose allocator for storing compressed pages. It is designed to store up to two compressed pages per physical page. While this design limits storage density, it has simple and deterministic reclaim properties that make it preferable to a higher density approach when reclaim will be used. zbud works by storing compressed pages, or "zpages", together in pairs in a single memory page called a "zbud page". The first buddy is "left justifed" at the beginning of the zbud page, and the last buddy is "right justified" at the end of the zbud page. The benefit is that if either buddy is freed, the freed buddy space, coalesced with whatever slack space that existed between the buddies, results in the largest possible free region within the zbud page. zbud also provides an attractive lower bound on density. The ratio of zpages to zbud pages can not be less than 1. This ensures that zbud can never "do harm" by using more pages to store zpages than the uncompressed zpages would have used on their own. This implementation is a rewrite of the zbud allocator internally used by zcache in the driver/staging tree. The rewrite was necessary to remove some of the zcache specific elements that were ingrained throughout and provide a generic allocation interface that can later be used by zsmalloc and others. This patch adds zbud to mm/ for later use by zswap. Signed-off-by: Seth Jennings <sjenning@linux.vnet.ibm.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Jenifer Hopper <jhopper@us.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <jweiner@redhat.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Hansen <dave@sr71.net> Cc: Joe Perches <joe@perches.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: Hugh Dickens <hughd@google.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Bob Liu <bob.liu@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09ipc/shmc.c: eliminate ugly 80-col tricksAndrew Morton1-2/+2
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/memory_hotplug.c: fix return value of online_pages()Toshi Kani1-3/+3
online_pages() is called from memory_block_action() when a user requests to online a memory block via sysfs. This function needs to return a proper error value in case of error. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm: honor min_free_kbytes set by userMichal Hocko1-7/+17
min_free_kbytes is updated during memory hotplug (by init_per_zone_wmark_min) currently which is right thing to do in most cases but this could be unexpected if admin increased the value to prevent from allocation failures and the new min_free_kbytes would be decreased as a result of memory hotadd. This patch saves the user defined value and allows updating min_free_kbytes only if it is higher than the saved one. A warning is printed when the new value is ignored. Signed-off-by: Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: don't need to free memcg via RCU or workqueueLi Zefan1-46/+5
Now memcg has the same life cycle with its corresponding cgroup, and a cgroup is freed via RCU and then mem_cgroup_css_free() will be called in a work function, so we can simply call __mem_cgroup_free() in mem_cgroup_css_free(). This actually reverts commit 59927fb984d ("memcg: free mem_cgroup by RCU to fix oops"). Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: kill memcg refcntLi Zefan1-17/+1
Now memcg has the same life cycle as its corresponding cgroup. Kill the useless refcnt. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: don't need to get a reference to the parentLi Zefan1-16/+3
The cgroup core guarantees it's always safe to access the parent. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: use css_get/put for swap memcgLi Zefan1-10/+16
Use css_get/put instead of mem_cgroup_get/put. A simple replacement will do. The historical reason that memcg has its own refcnt instead of always using css_get/put, is that cgroup couldn't be removed if there're still css refs, so css refs can't be used as long-lived reference. The situation has changed so that rmdir a cgroup will succeed regardless css refs, but won't be freed until css refs goes down to 0. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: use css_get/put when charging/uncharging kmemLi Zefan1-26/+54
Use css_get/put instead of mem_cgroup_get/put. We can't do a simple replacement, because here mem_cgroup_put() is called during mem_cgroup_css_free(), while mem_cgroup_css_free() won't be called until css refcnt goes down to 0. Instead we increment css refcnt in mem_cgroup_css_offline(), and then check if there's still kmem charges. If not, css refcnt will be decremented immediately, otherwise the refcnt will be released after the last kmem allocation is uncahred. [akpm@linux-foundation.org: tweak comment] Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: don't use mem_cgroup_get() when creating a kmemcg cacheLi Zefan1-5/+5
Use css_get()/css_put() instead of mem_cgroup_get()/mem_cgroup_put(). There are two things being done in the current code: First, we acquired a css_ref to make sure that the underlying cgroup would not go away. That is a short lived reference, and it is put as soon as the cache is created. At this point, we acquire a long-lived per-cache memcg reference count to guarantee that the memcg will still be alive. so it is: enqueue: css_get create : memcg_get, css_put destroy: memcg_put So we only need to get rid of the memcg_get, change the memcg_put to css_put, and get rid of the now extra css_put. (This changelog is mostly written by Glauber) Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: use css_get() in sock_update_memcg()Li Zefan1-4/+4
Use css_get/css_put instead of mem_cgroup_get/put. Note, if at the same time someone is moving @current to a different cgroup and removing the old cgroup, css_tryget() may return false, and sock->sk_cgrp won't be initialized, which is fine. Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg, kmem: fix reference count handling on the error pathMichal Hocko1-8/+0
mem_cgroup_css_online calls mem_cgroup_put if memcg_init_kmem fails. This is not correct because only memcg_propagate_kmem takes an additional reference while mem_cgroup_sockets_init is allowed to fail as well (although no current implementation fails) but it doesn't take any reference. This all suggests that it should be memcg_propagate_kmem that should clean up after itself so this patch moves mem_cgroup_put over there. Unfortunately this is not that easy (as pointed out by Li Zefan) because memcg_kmem_mark_dead marks the group dead (KMEM_ACCOUNTED_DEAD) if it is marked active (KMEM_ACCOUNTED_ACTIVE) which is the case even if memcg_propagate_kmem fails so the additional reference is dropped in that case in kmem_cgroup_destroy which means that the reference would be dropped two times. The easiest way then would be to simply remove mem_cgrroup_put from mem_cgroup_css_online and rely on kmem_cgroup_destroy doing the right thing. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.8] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09Revert "memcg: avoid dangling reference count in creation failure"Michal Hocko1-2/+0
This reverts commit e4715f01be697a. mem_cgroup_put is hierarchy aware so mem_cgroup_put(memcg) already drops an additional reference from all parents so the additional mem_cgrroup_put(parent) potentially causes use-after-free. Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Li Zefan <lizefan@huawei.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hughd@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mmap: allow MAP_HUGETLB for hugetlbfs files v2Jörn Engel1-2/+4
It is counterintuitive at best that mmap'ing a hugetlbfs file with MAP_HUGETLB fails, while mmap'ing it without will a) succeed and b) return huge pages. v2: use is_file_hugepages(), as suggested by Jianguo Signed-off-by: Joern Engel <joern@logfs.org> Cc: Jianguo Wu <wujianguo@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm: vmscan: do not scale writeback pages when deciding whether to set ↵Mel Gorman1-15/+1
ZONE_WRITEBACK After the patch "mm: vmscan: Flatten kswapd priority loop" was merged the scanning priority of kswapd changed. The priority now rises until it is scanning enough pages to meet the high watermark. shrink_inactive_list sets ZONE_WRITEBACK if a number of pages were encountered under writeback but this value is scaled based on the priority. As kswapd frequently scans with a higher priority now it is relatively easy to set ZONE_WRITEBACK. This patch removes the scaling and treates writeback pages similar to how it treats unqueued dirty pages and congested pages. The user-visible effect should be that kswapd will writeback fewer pages from reclaim context. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm: vmscan: do not continue scanning if reclaim was aborted for compactionMel Gorman1-3/+5
Direct reclaim is not aborting to allow compaction to go ahead properly. do_try_to_free_pages is told to abort reclaim which is happily ignores and instead increases priority instead until it reaches 0 and starts shrinking file/anon equally. This patch corrects the situation by aborting reclaim when requested instead of raising priority. Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/memory_hotplug.c: fix a comment typo in register_page_bootmem_info_node()Tang Chen1-2/+2
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/memblock.c: fix wrong comment in __next_free_mem_range()Tang Chen1-1/+1
Remove one redundant "nid" in the comment. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/vmalloc.c: fix an overflow bug in alloc_vmap_area()Zhang Yanfei1-3/+3
When searching a vmap area in the vmalloc space, we use (addr + size - 1) to check if the value is less than addr, which is an overflow. But we assign (addr + size) to vmap_area->va_end. So if we come across the below case: (addr + size - 1) : not overflow (addr + size) : overflow we will assign an overflow value (e.g 0) to vmap_area->va_end, And this will trigger BUG in __insert_vmap_area, causing system panic. So using (addr + size) to check the overflow should be the correct behaviour, not (addr + size - 1). Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reported-by: Ghennadi Procopciuc <unix140@gmail.com> Tested-by: Daniel Baluta <dbaluta@ixiacom.com> Cc: David Rientjes <rientjes@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm: remove unused VM_<READfoo> macros and expand other in-placeJoe Perches3-5/+5
These VM_<READfoo> macros aren't used very often and three of them aren't used at all. Expand the ones that are used in-place, and remove all the now unused #define VM_<foo> macros. VM_READHINTMASK, VM_NormalReadHint and VM_ClearReadHint were added just before 2.4 and appears have never been used. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/sparse.c: put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVEZhang Yanfei1-1/+1
With CONFIG_MEMORY_HOTREMOVE unset, there is a compile warning: mm/sparse.c:755: warning: `clear_hwpoisoned_pages' defined but not used And Bisecting it ended up pointing to 4edd7ceff ("mm, hotplug: avoid compiling memory hotremove functions when disabled"). This is because the commit above put sparse_remove_one_section() within the protection of CONFIG_MEMORY_HOTREMOVE but the only user of clear_hwpoisoned_pages() is sparse_remove_one_section(), and it is not within the protection of CONFIG_MEMORY_HOTREMOVE. So put clear_hwpoisoned_pages within CONFIG_MEMORY_HOTREMOVE should fix the warning. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm: remove unused __put_page()Zhang Yanfei1-5/+0
This function is nowhere used, and it has a confusing name with put_page in mm/swap.c. So better to remove it. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09vfree: don't schedule free_work() if llist_add() returns falseOleg Nesterov1-3/+2
vfree() only needs schedule_work(&p->wq) if p->list was empty, otherwise vfree_deferred->wq is already pending or it is running and didn't do llist_del_all() yet. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/page_alloc.c: remove unlikely() from the current_order testZhang Yanfei1-1/+1
In __rmqueue_fallback(), current_order loops down from MAX_ORDER - 1 to the order passed. MAX_ORDER is typically 11 and pageblock_order is typically 9 on x86. Integer division truncates, so pageblock_order / 2 is 4. For the first eight iterations, it's guaranteed that current_order >= pageblock_order / 2 if it even gets that far! So just remove the unlikely(), it's completely bogus. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Suggested-by: David Rientjes <rientjes@google.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/page_alloc.c: remove zone_type argument of build_zonelists_nodeZhang Yanfei1-13/+8
The callers of build_zonelists_node always pass MAX_NR_ZONES -1 as the zone_type argument, so we can directly use the value in build_zonelists_node and remove zone_type argument. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: do not account memory used for cache creationGlauber Costa1-0/+2
The memory we used to hold the memcg arrays is currently accounted to the current memcg. But that creates a problem, because that memory can only be freed after the last user is gone. Our only way to know which is the last user, is to hook up to freeing time, but the fact that we still have some in flight kmallocs will prevent freeing to happen. I believe therefore to be just easier to account this memory as global overhead. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09memcg: also test for skip accounting at the page allocation levelGlauber Costa1-0/+28
The memory we used to hold the memcg arrays is currently accounted to the current memcg. But that creates a problem, because that memory can only be freed after the last user is gone. Our only way to know which is the last user, is to hook up to freeing time, but the fact that we still have some in flight kmallocs will prevent freeing to happen. I believe therefore to be just easier to account this memory as global overhead. This patch (of 2): Disabling accounting is only relevant for some specific memcg internal allocations. Therefore we would initially not have such check at memcg_kmem_newpage_charge, since direct calls to the page allocator that are marked with GFP_KMEMCG only happen outside memcg core. We are mostly concerned with cache allocations and by having this test at memcg_kmem_get_cache we are already able to relay the allocation to the root cache and bypass the memcg caches altogether. There is one exception, though: the SLUB allocator does not create large order caches, but rather service large kmallocs directly from the page allocator. Therefore, the following sequence, when backed by the SLUB allocator: memcg_stop_kmem_account(); kmalloc(<large_number>) memcg_resume_kmem_account(); would effectively ignore the fact that we should skip accounting, since it will drive us directly to this function without passing through the cache selector memcg_kmem_get_cache. Such large allocations are extremely rare but can happen, for instance, for the cache arrays. This was never a problem in practice, because we weren't skipping accounting for the cache arrays. All the allocations we were skipping were fairly small. However, the fact that we were not skipping those allocations are a problem and can prevent the memcgs from going away. As we fix that, we need to make sure that the fix will also work with the SLUB allocator. Signed-off-by: Glauber Costa <glommer@openvz.org> Reported-by: Michal Hocko <mhocko@suze.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/vmalloc.c: check VM_UNINITIALIZED flag in s_show instead of show_numa_infoZhang Yanfei1-5/+5
We should check the VM_UNITIALIZED flag in s_show(). If this flag is set, that said, the vm_struct is not fully initialized. So it is unnecessary to try to show the information contained in vm_struct. We checked this flag in show_numa_info(), but I think it's better to check it earlier. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09mm/vmalloc.c: rename VM_UNLIST to VM_UNINITIALIZEDZhang Yanfei1-9/+9
VM_UNLIST was used to indicate that the vm_struct is not listed in vmlist. But after commit 4341fa454796 ("mm, vmalloc: remove list management of vmlist after initializing vmalloc"), the meaning of this flag changed. It now means the vm_struct is not fully initialized. So renaming it to VM_UNINITIALIZED seems more reasonable. Also change clear_vm_unlist to clear_vm_uninitialized_flag. Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 17:50:53 +0000