summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)AuthorFilesLines
2008-02-29x86 ptrace: fix ptrace_bts_config structure declarationDave Anderson1-4/+4
The 2.6.25 ptrace_bts_config structure in asm-x86/ptrace-abi.h is defined with u32 types: #include <asm/types.h> /* configuration/status structure used in PTRACE_BTS_CONFIG and PTRACE_BTS_STATUS commands. */ struct ptrace_bts_config { /* requested or actual size of BTS buffer in bytes */ u32 size; /* bitmask of below flags */ u32 flags; /* buffer overflow signal */ u32 signal; /* actual size of bts_struct in bytes */ u32 bts_size; }; #endif But u32 is only accessible in asm-x86/types.h if __KERNEL__, leading to compile errors when ptrace.h is included from user-space. The double-underscore versions that are exported to user-space in asm-x86/types.h should be used instead. Signed-off-by: Dave Anderson <anderson@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-29x86: fix pmd_bad and pud_bad to support huge pagesHans Rosenfeld2-3/+7
I recently stumbled upon a problem in the support for huge pages. If a program using huge pages does not explicitly unmap them, they remain mapped (and therefore, are lost) after the program exits. I observed that the free huge page count in /proc/meminfo decreased when running my program, and it did not increase after the program exited. After running the program a few times, no more huge pages could be allocated. The reason for this seems to be that the x86 pmd_bad and pud_bad consider pmd/pud entries having the PSE bit set invalid. I think there is nothing wrong with this bit being set, it just indicates that the lowest level of translation has been reached. This bit has to be (and is) checked after the basic validity of the entry has been checked, like in this fragment from follow_page() in mm/memory.c: if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) goto no_page_table; if (pmd_huge(*pmd)) { BUG_ON(flags & FOLL_GET); page = follow_huge_pmd(mm, address, pmd, flags & FOLL_WRITE); goto out; } Note that this code currently doesn't work as intended if the pmd refers to a huge page, the pmd_huge() check can not be reached if the page is huge. Extending pmd_bad() (and, for future 1GB page support, pud_bad()) to allow for the PSE bit being set fixes this. For similar reasons, allowing the NX bit being set is necessary, too. I have seen huge pages having the NX bit set in their pmd entry, which would cause the same problem. Signed-Off-By: Hans Rosenfeld <hans.rosenfeld@amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-29Merge branch 'avr32-fixes' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6 * 'avr32-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: avr32: Fix OCD refcounting bug avr32: Call tick_nohz_{stop,restart}_sched_tick() in idle loop avr32: Use correct config symbol in atstk1004 board code avr32: Fix broken pte dump code in do_page_fault() AVR32: Define PAGE_SHARED
2008-02-29Merge branch 'for-linus' of ↵Linus Torvalds9-17/+96
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (35 commits) Blackfin Serial Driver: Fix bug - Only insert UART rx char in timer task. Blackfin Serial Driver: Fix bug - update tx dma buffer tail before wake up processes. Blackfin Serial Driver: Fix bug - Increase buffer tail immediately before starting tx dma. [Blackfin] serial driver: Add flow control support to bf54x [Blackfin] serial driver: Fix bug Poll RTS/CTS status in DMA mode as well [Blackfin] serial driver: ADSP-BF52x arch/mach support [Blackfin] serial driver: use simpler comment headers and strip out information that is maintained in the scm's log [Blackfin] serial driver: rework break flood anomaly handling to be more robust/realistic about what we can actually work around [Blackfin] serial driver: fix bug - cache the bits of the LSR on systems where the LSR is read-to-clear [Blackfin] serial driver: fix bug - should not wait for the TFI bit, just clear it when tx stop. [Blackfin] serial driver: Fix bug serial driver in DMA mode spams history to console on shell restart [Blackfin] serial driver: Fix bug Free rx dma buffer in shutdown. [Blackfin] serial driver: Clean up UART DMA code. Blackfin Serial driver: Fix bug - serial driver in PIO mode cant handle input very quickly [Blackfin] arch: kill section mismatch warnings [Blackfin] arch: handle the most common L1 shrinkage case (L1 does not exist for a part) so that any parts labeled for L1 instead get placed into external memory sections [Blackfin] arch: add bfin_clear_PPIx_STATUS() helper funcs like we have for other parts [Blackfin] arch: make sure we have proper description/copyright/license lines [Blackfin] arch: Fix CONFIG_PM support for BF561 [Blackfin] arch: Remove DPMC char driver option ...
2008-02-29let __dec_zone_page_state use __dec_zone_stateUwe Kleine-König1-2/+1
This removes code duplication and makes __dec_zone_page_state look like __inc_zone_page_state. Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com> Acked-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds4-10/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: arch/sh/drivers/dma/dma-sh.c: Correct use of ! and & serial: Move asm-sh/sci.h to linux/serial_sci.h. sh: Fix up HAS_SR_RB typo in entry-macros. maple: fix device detection sh: fix rtc_resources setup for sh770x sh: heartbeat: ioremap is expected to succeed sh: Storage class should be before const qualifier maple: remove unused variable sh: SH5-103 needs to select CPU_SH5. sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash.
2008-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds3-7/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (79 commits) [X25]: Use proc_create() to setup ->proc_fops first [WANROUTER]: Use proc_create() to setup ->proc_fops first [8021Q]: Use proc_create() to setup ->proc_fops first [IPV4]: Use proc_create() to setup ->proc_fops first [IPV6]: Use proc_create() to setup ->proc_fops first [SCTP]: Use proc_create() to setup ->proc_fops first [PKTGEN]: Use proc_create() to setup ->proc_fops first [NEIGHBOUR]: Use proc_create() to setup ->proc_fops first [LLC]: Use proc_create() to setup ->proc_fops first [IPX]: Use proc_create() to setup ->proc_fops first [SUNRPC]: Use proc_create() to setup ->proc_fops first [ATM]: Use proc_create() to setup ->proc_fops first [SCTP]: Update AUTH structures to match declarations in draft-16. [SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option [SCTP]: Clean up naming conventions of sctp protocol/address family registration [APPLETALK]: Use proc_create() to setup ->proc_fops first [BNX2X]: add bnx2x to MAINTAINERS [BNX2X]: update version, remove CVS strings [BNX2X]: Fix Xmit bugs [BNX2X]: Prevent PCI queue overflow ...
2008-02-29elfcore-compat fix uid/gid typesRoland McGrath1-2/+2
I overlooked the difference between __kernel_uid_t and uid_t when defining struct compat_elf_prpsinfo. The result is a regression in 32-bit core dumps on x86_64, where the NT_PRPSINFO note has the wrong size and layout. This patch fixes it. Signed-off-by: Roland McGrath <roland@redhat.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-28Merge branch 'pending' of ↵David S. Miller1-4/+6
master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev
2008-02-28[SCTP]: Update AUTH structures to match declarations in draft-16.Vlad Yasevich1-4/+6
The new SCTP socket api (draft 16) updates the AUTH API structures. We never exported these since we knew they would change. Update the rest to match the draft. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
2008-02-27[NETFILTER]: Fix NF_QUEUE_NR() parenthesisPatrick McHardy1-1/+1
Properly add parens around the macro argument. This is not needed by the kernel but the macro is exported to userspace, so it shouldn't make any assumptions. Also use NF_VERDICT_BITS instead of NF_VERDICT_QBTIS for the left-shift since thats whats logically correct. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26CONNECTOR: make cn_already_initialized staticLi Zefan1-2/+0
It is used in connector.c only, so make it static. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-26Merge branch 'for_linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: add missing ext4_journal_stop() ext4: ext4_find_next_zero_bit needs an aligned address on some arch ext4: set EXT4_EXTENTS_FL only for directory and regular files ext4: Don't mark filesystem error if fallocate fails ext4: Fix BUG when writing to an unitialized extent ext4: Don't use ext4_dec_count() if not needed ext4: modify block allocation algorithm for the last group ext4: Don't claim block from group which has corrupt bitmap ext4: Get journal write access before modifying the extent tree ext4: Fix memory and buffer head leak in callers to ext4_ext_find_extent() ext4: Don't leave behind a half-created inode if ext4_mkdir() fails ext4: Fix kernel BUG at fs/ext4/mballoc.c:910! ext4: Fix locking hierarchy violation in ext4_fallocate() Remove incorrect BKL comments in ext4
2008-02-26Merge branch 'v2.6.25-rc3-lockdep' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep * 'v2.6.25-rc3-lockdep' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep: Subject: lockdep: include all lock classes in all_lock_classes lockdep: increase MAX_LOCK_DEPTH
2008-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86Linus Torvalds4-22/+70
* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (24 commits) x86: no robust/pi futex for real i386 CPUs x86: fix boot failure on 486 due to TSC breakage x86: fix build on non-C locales. x86: make c_idle.work have a static address. x86: don't save unreliable stack trace entries x86: don't make swapper_pg_pmd global x86: don't print a warning when MTRR are blank and running in KVM x86: fix execve with -fstack-protect x86: fix vsyscall wreckage x86: rename KERNEL_TEXT_SIZE => KERNEL_IMAGE_SIZE x86: fix spontaneous reboot with allyesconfig bzImage x86: remove double-checking empty zero pages debug x86: notsc is ignored on common configurations x86/mtrr: fix kernel-doc missing notation x86: handle BIOSes which terminate e820 with CF=1 and no SMAP x86: add comments for NOPs x86: don't use P6_NOPs if compiling with CONFIG_X86_GENERIC x86: require family >= 6 if we are using P6 NOPs x86: do not promote TM3x00/TM5x00 to i686-class x86: hpet fix docbook comment ...
2008-02-26x86: no robust/pi futex for real i386 CPUsThomas Gleixner1-0/+7
Real i386 CPUs do not have cmpxchg instructions. Catch it before crashing on an invalid opcode. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26x86: rename KERNEL_TEXT_SIZE => KERNEL_IMAGE_SIZEIngo Molnar1-2/+2
The KERNEL_TEXT_SIZE constant was mis-named, as we not only map the kernel text but data, bss and init sections as well. That name led me on the wrong path with the KERNEL_TEXT_SIZE regression, because i knew how big of _text_ my images have and i knew about the 40 MB "text" limit so i wrongly thought to be on the safe side of the 40 MB limit with my 29 MB of text, while the total image size was slightly above 40 MB. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-26x86: fix spontaneous reboot with allyesconfig bzImageIngo Molnar1-2/+6
recently the 64-bit allyesconfig bzImage kernel started spontaneously rebooting during early bootup. after a few fun hours spent with early init debugging, it turns out that we've got this rather annoying limit on the size of the kernel image: #define KERNEL_TEXT_SIZE (40*1024*1024) which limit my vmlinux just happened to pass: text data bss dec hex filename 29703744 4222751 8646224 42572719 2899baf vmlinux 40 MB is 42572719 bytes, so my vmlinux was just 1.5% above this limit :-/ So it happily crashed right in head_64.S, which - as we all know - is the most debuggable code in the whole architecture ;-) So increase the limit to allow an up to 128MB kernel image to be mapped. (should anyone be that crazy or lazy) We have a full 4K of pagetable (level2_kernel_pgt) allocated for these mappings already, so there's no RAM overhead and the limit was rather pointless and arbitrary. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-26x86: add comments for NOPsH. Peter Anvin1-17/+45
Add comments describing the various NOP sequences. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26x86: require family >= 6 if we are using P6 NOPsH. Peter Anvin1-3/+1
The P6 family of NOPs are only available on family >= 6 or above, so enforce that in the boot code. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26lguest: include function prototypesHarvey Harrison1-0/+11
Added a declaration to asm-x86/lguest.h and moved the extern arrays there as well. As an alternative to including asm/lguest.h directly, an include could be put in linux/lguest.h Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: "rusty@rustcorp.com.au" <rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-26serial: Move asm-sh/sci.h to linux/serial_sci.h.Paul Mundt1-6/+4
This header is needed on other architectures as well (namely h8300), which currently fails to build without this in place. Rather than duplicating the port definition completely there, just move this to a common location instead. This should get h8300 working again for 2.6.25, in addition to the changes already pushed by Sato-san in -rc2. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26sh: Fix up HAS_SR_RB typo in entry-macros.Hideo Saito1-2/+2
Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-26maple: remove unused variableAdrian McMenamin1-1/+0
Remove an unused variable from the definition of struct maple_device Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-25lockdep: increase MAX_LOCK_DEPTHPeter Zijlstra1-1/+1
Some code paths exceed the current max lock depth (XFS), so increase this limit a bit. I looked at making this a dynamic allocated array, but we should not advocate insane lock depths, so stay with this as long as it works... Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-25sched: add declaration of sched_tail to sched.hHarvey Harrison1-0/+1
Avoids sparse warnings: kernel/sched.c:2170:17: warning: symbol 'schedule_tail' was not declared. Should it be static? Avoids the need for an external declaration in arch/um/process.c Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-02-25sh: Rename SH-3 CCR3 reg to avoid synclink_cs clash.Paul Mundt1-1/+1
drivers/char/pcmcia/synclink_cs.c:284:1: warning: "CCR3" redefined In file included from include/asm/cache.h:13, from include/asm/processor_32.h:15, from include/asm/processor.h:60, from include/linux/prefetch.h:14, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/char/pcmcia/synclink_cs.c:38: include/asm/cpu/cache.h:38:1: warning: this is the location of the previous definition Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-24i2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=nDavid Brownell1-1/+8
Don't require platform code to be #ifdeffed according to whether I2C is enabled or not ... if it's not enabled, let GCC compile out all I2C device declarations. (Issue noted on an NSLU2 build that didn't configure I2C.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24Alchemy: compile fixManuel Lauss4-0/+4
Commit 8b798c4d16b762d15f4055597ff8d87f73b35552 broke alchemy build, fix it. Pointed out by Adrian Bunk. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-24i2c: Storage class should be before const qualifierTobias Klauser1-1/+1
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2008-02-23Merge branch 'upstream-linus' of ↵Linus Torvalds2-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata-core: fix kernel-doc warning sata_fsl: fix build with ATA_VERBOSE_DEBUG [libata] ahci: AMD SB700/SB800 SATA support 64bit DMA libata-pmp: clear hob for pmp register accesses libata: automatically use DMADIR if drive/bridge requires it power_state: get rid of write-only variable in SATA pata_atiixp: Use 255 sector limit
2008-02-24libata: automatically use DMADIR if drive/bridge requires itTejun Heo2-0/+6
Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds10-14/+67
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) [NETFILTER]: fix ebtable targets return [IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly. [NET]: Restore sanity wrt. print_mac(). [NEIGH]: Fix race between neighbor lookup and table's hash_rnd update. [RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK tg3: ethtool phys_id default [BNX2]: Update version to 1.7.4. [BNX2]: Disable parallel detect on an HP blade. [BNX2]: More 5706S link down workaround. ssb: Fix support for PCI devices behind a SSB->PCI bridge zd1211rw: fix sparse warnings rtl818x: fix sparse warnings ssb: Fix pcicore cardbus mode ssb: Make the GPIO API reentrancy safe ssb: Fix the GPIO API ssb: Fix watchdog access for devices without a chipcommon ssb: Fix serial console on new bcm47xx devices ath5k: Fix build warnings on some 64-bit platforms. WDEV, ath5k, don't return int from bool function WDEV: ath5k, fix lock imbalance ...
2008-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds4-0/+21
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: make IOMMU code respect the segment boundary limits [SPARC64]: Fix cpu trampoline et al. mismatch warnings. [SPARC64]: More sparse warning fixes in process.c [SPARC64]: Fix sparse warning wrt. fault_in_user_windows. [SPARC64]: Kill show_regs32(). [SPARC64]: Fix sparse warnings wrt. __show_regs(). [SPARC64]: Kill show_stackframe{,32}(). [SPARC64]: Fix sparse warnings wrt. machine_alt_power_off().
2008-02-23[IP_TUNNEL]: Don't limit the number of tunnels with generic name explicitly.Pavel Emelyanov1-2/+0
Use the added dev_alloc_name() call to create tunnel device name, rather than iterate in a hand-made loop with an artificial limit. Thanks Patrick for noticing this. [ The way this works is, when the device is actually registered, the generic code noticed the '%' in the name and invokes dev_alloc_name() to fully resolve the name. -DaveM ] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23[NET]: Restore sanity wrt. print_mac().David S. Miller1-1/+2
MAC_FMT had only one user and we tried to get rid of that, but this created more problems than it solved. As a result, this reverts three commits: 235365f3aaaa10b7056293877c0ead50425f25c7 ("net/8021q/vlan_dev.c: Use print_mac."), fea5fa875eb235dc186b1f5184eb36abc63e26cc ("[NET]: Remove MAC_FMT"), and 8f789c48448aed74fe1c07af76de8f04adacec7d ("[NET]: Elminate spurious print_mac() calls.") Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-23cgroup: clean up cgroup.hLi Zefan1-25/+23
- replace old name 'cont' with 'cgrp' (Paul Menage did this cleanup for cgroup.c in commit bd89aabc6761de1c35b154fe6f914a445d301510) - remove a duplicate declaration of cgroup_path() Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23cgroup: fix commentsLi Zefan1-1/+1
fix: - comments about need_forkexit_callback - comments about release agent - typo and comment style, etc. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23h8300: IRQ handling updateYoshinori Sato2-16/+5
- add missing file and declare. - remove unused file and macros. - some cleanup. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23h8300: uaccess.h updateYoshinori Sato1-2/+2
get_user const *ptr access fix. Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23futex: runtime enable pi and robust functionalityThomas Gleixner1-0/+1
Not all architectures implement futex_atomic_cmpxchg_inatomic(). The default implementation returns -ENOSYS, which is currently not handled inside of the futex guts. Futex PI calls and robust list exits with a held futex result in an endless loop in the futex code on architectures which have no support. Fixing up every place where futex_atomic_cmpxchg_inatomic() is called would add a fair amount of extra if/else constructs to the already complex code. It is also not possible to disable the robust feature before user space tries to register robust lists. Compile time disabling is not a good idea either, as there are already architectures with runtime detection of futex_atomic_cmpxchg_inatomic support. Detect the functionality at runtime instead by calling cmpxchg_futex_value_locked() with a NULL pointer from the futex initialization code. This is guaranteed to fail, but the call of futex_atomic_cmpxchg_inatomic() happens with pagefaults disabled. On architectures, which use the asm-generic implementation or have a runtime CPU feature detection, a -ENOSYS return value disables the PI/robust features. On architectures with a working implementation the call returns -EFAULT and the PI/robust features are enabled. The relevant syscalls return -ENOSYS and the robust list exit code is blocked, when the detection fails. Fixes http://lkml.org/lkml/2008/2/11/149 Originally reported by: Lennart Buytenhek Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Riku Voipio <riku.voipio@movial.fi> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23efs: move headers out of include/linux/Christoph Hellwig3-166/+0
Merge include/linux/efs_fs{_i,_dir}.h into fs/efs/efs.h. efs_vh.h remains there because this is the IRIX volume header and shouldn't really be handled by efs but by the partitioning code. efs_sb.h remains there for now because it's exported to userspace. Of course this wrong and aboot should have a copy of it's own, but I'll leave that to a separate patch to avoid any contention. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23spi: pxa2xx_spi clock polarity fixNed Forrester1-0/+1
Fixes a sequencing bug in spi driver pxa2xx_spi.c in which the chip select for a transfer may be asserted before the clock polarity is set on the interface. As a result of this bug, the clock signal may have the wrong polarity at transfer start, so it may need to make an extra half transition before the intended clock/data signals begin. (This probably means all transfers are one bit out of sequence.) This only occurs on the first transfer following a change in clock polarity in systems using more than one more than one such polarity. The fix assures that the clock mode is properly set before asserting chip select. This bug was introduced in a patch merged on 2006/12/10, kernel 2.6.20. The patch defines an additional bit in: include/asm-arm/arch-pxa/regs-ssp.h for 2.6.25 and newer kernels but this addition must be made in: include/asm-arm/arch-pxa/pxa-regs.h for kernels between 2.6.20 and 2.6.24, inclusive Signed-off-by: Ned Forrester <nforrester@whoi.edu> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23NOMMU: is_vmalloc_addr() won't compile if !MMUDavid Howells1-0/+2
Make is_vmalloc_addr() contingent on CONFIG_MMU=y, as it won't compile in !MMU mode. [ Bug introduced in commit 9e2779fa281cfda13ac060753d674bbcaa23367e: "is_vmalloc_addr(): Check if an address is within the vmalloc boundaries" ]. Signed-off-by: David Howells <dhowells@redhat.com> Cc: Greg Ungerer <gerg@snapgear.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23sparc: fix buildDavid Rientjes1-3/+0
Fix build failure on sparc: In file included from include/linux/mm.h:39, from include/linux/memcontrol.h:24, from include/linux/swap.h:8, from include/linux/suspend.h:7, from init/do_mounts.c:6: include/asm/pgtable.h:344: warning: parameter names (without types) in function declaration include/asm/pgtable.h:345: warning: parameter names (without types) in function declaration include/asm/pgtable.h:346: error: expected '=', ',', ';', 'asm' or '__attribute__' before '___f___swp_entry' viro sayeth: I've run allmodconfig builds on a bunch of target, FWIW (essentially the same patch). Note that these includes are recent addition caused by added inline function that had since then become a define. So while I agree with your comments in general, in _this_ case it's pretty safe. The commit that had done it is 3062fc67dad01b1d2a15d58c709eff946389eca4 ("memcontrol: move mm_cgroup to header file") and the switch to #define is in commit 60c12b1202a60eabb1c61317e5d2678fcea9893f ("memcontrol: add vm_match_cgroup()") (BTW, that probably warranted mentioning in the changelog of the latter). Cc: Adrian Bunk <bunk@kernel.org> Cc: Robert Reif <reif@earthlink.net> Signed-off-by: David Rientjes <rientjes@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23MN10300: define SO_MARKDavid Howells1-0/+2
Define SO_MARK for MN10300. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23MN10300: define HZ as a config optionDavid Howells1-1/+1
Define HZ as a config option. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23percpu: fix DEBUG_PREEMPT per_cpu checkingHugh Dickins2-1/+3
2.6.25-rc1 percpu changes broke CONFIG_DEBUG_PREEMPT's per_cpu checking on several architectures. On s390, sparc64 and x86 it's been weakened to not checking at all; whereas on powerpc64 it's become too strict, issuing warnings from __raw_get_cpu_var in io_schedule and init_timer for example. Fix this by weakening powerpc's __my_cpu_offset to use the non-checking local_paca instead of get_paca (which itself contains such a check); and strengthening the generic my_cpu_offset to go the old slow way via smp_processor_id when CONFIG_DEBUG_PREEMPT (debug_smp_processor_id is where all the knowledge of what's correct when lives). Signed-off-by: Hugh Dickins <hugh@veritas.com> Reviewed-by: Mike Travis <travis@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki1-1/+8
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-22[ALSA] opl3 - Fix compilation without sequencer supportTakashi Iwai1-2/+7
Add proper ifdef's to the patch loading code moved from the old instr layer so that opl3 driver can be compiled without the sequencer support. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 11:44:07 +0000