summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2017-09-22bnxt_re: Remove RTNL lock dependency in bnxt_re_query_portSomnath Kotur3-8/+9
When there is a NETDEV_UNREGISTER event, bnxt_re driver calls ib_unregister_device() (RTNL lock held). ib_unregister_device attempts to flush a worker queue scheduled by ib_core and that queue might have a pending ib_query_port(). ib_query_port in turn calls bnxt_re_query_port(), which while querying the link speed using ib_get_eth_speed(), tries to acquire the rtnl_lock() which was already held by NETDEV_UNREGISTER. Fixing the issue by removing the link speed query from bnxt_re_query_port() Now the speed is queried post a successful ib_register_device or whenever there is a NETDEV_CHANGE event. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22bnxt_re: Fix race between the netdev register and unregister eventsSomnath Kotur2-5/+15
Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain, the IB stack registration is spawned off to a workqueue since that also requires an rtnl lock. There could be 2 kinds of races between the NETDEV_REGISTER and the NETDEV_UNREGISTER event handling. a)The NETDEV_UNREGISTER event is received in rapid succession after the NETDEV_REGISTER event even before the work queue got a chance to run. b)The NETDEV_UNREGISTER event is received while the workqueue that handles registration with the IB stack is still in progress. Handle both the races with a bit flag that is set just before the work item is queued and cleared in the workqueue after the event is handled just before the workqueue item is freed. While adding the new flag, it was noted that the flags are all used in *_bit() operations which expect a bit number and not a literal constant with a bit set. So change the numbers to be bit numbers. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22bnxt_re: Free up devices in module_exit pathSomnath Kotur1-0/+16
Clean up all devices added to the bnxt_re_dev_list in the module_exit entry point. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22bnxt_re: Fix compare and swap atomic operandsDevesh Sharma1-0/+1
Driver must assign the user supplied compare/swap values in the wqe to successfully complete the atomic compare and swap operation. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22bnxt_re: Stop issuing further cmds to FW once a cmd times outSomnath Kotur2-1/+6
Once a cmd to FW times out(after 20s) it is reasonable to assume the FW or atleast the control path is dead. No point issuing further cmds to the FW as each subsequent cmd with another 20s timeout will cascade resulting in unnecessary traces and/or NMI Lockups. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22bnxt_re: Fix update of qplib_qp.mtu when modifiedDevesh Sharma1-0/+3
The MTU value in the qplib_qp.mtu should be consistent with whatever mtu was set during INIT to RTR.The Next PSN and number of packets are calculated based on this member in the qplib_qp structure. Signed-off-by: Narender Reddy <narender.reddy@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Add support for port reuse on active side connectionsShiraz Saleem2-76/+78
During OpenMPI scale up testing, we observe rdma_connect failures if ports are reused on multiple connections. This is because the Control Queue-Pair (CQP) command to add the reused port to Accelerated Port Bit VectorTable (APBVT) fails as there already exists an entry. Check for duplicate port before invoking the CQP command to add APBVT entry and delete the entry only if the port is not in use. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Add missing VLAN priorityMustafa Ismail2-1/+4
Set the VLAN priority which is in the upper 3 bits of the VLAN tag field in the QP context. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Call i40iw_cm_disconn on modify QP to disconnectShiraz Saleem1-0/+12
If QP modify to closing/terminate/error fails, connection is not torn down as there is no corresponding asynchronous event that will initiate the teardown. Add explicit call to i40iw_cm_disconn if not waiting in modify QP, otherwise schedule it in CM timer. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Prevent multiple netdev event notifier registrationsShiraz Saleem3-19/+20
Netdev event notifier registration/de-registration is not synchronized with a lock and there is a possibility of a duplicate registration of notifier before the unregister completes. Register netdev event notifiers during module init and de-register them at module exit. This avoids the need to tie the registration to first netdev client interface open and de-registration to last client interface close and the synchronization to achieve it. This also fixes a crash due to duplicate registration. BUG: unable to handle kernel paging request at ffffffffa0d60388 IP: [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 PGD 190d067 PUD 190e063 PMD 76c840067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: i40e(OF-) fuse btrfs zlib_deflate raid6_pq xor vfat msdos [..] e1000e vxlan ip_tunnel ptp pps_core i2c_core video [last unloaded: i40iw] CPU: 1 PID: 27101 Comm: modprobe Tainted: GF W O-------------- 3.10.0-229.el7.x86_64 #1 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 task: ffff88076e8a96c0 ti: ffff8806959c8000 task.ti: ffff8806959c8000 RIP: 0010:[<ffffffff8160f75d>] [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 RSP: 0018:ffff8806959cbb38 EFLAGS: 00010282 RAX: ffffffffa0d60380 RBX: 00000000fffffffd RCX: 0000000000000000 0708] RDX: 0000000000000000 RSI: ffff88081227a000 RDI: 0000000000000002 RBP: ffff8806959cbb60 R08: 0000000000000246 R09: 000000000000700c R10: ffff88080e16ea40 R11: 00000000000ae8df R12: ffffffffa0d60380 R13: 0000000000000002 R14: ffff88076e738800 R15: 0000000000000000 FS: 00007f604ef4a740(0000) GS:ffff88083e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0d60388 CR3: 0000000753cd2000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff819e73a0 0000000000000000 0000000000000002 ffff88076e738800 00000000ffffffff ffff8806959cbba0 ffffffff8109d61d 0000000000000000 0000000000000000 ffff88076e738800 0000000000000000 ffff88076e738800 Call Trace: [<ffffffff8109d61d>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff8109d656>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8156b9e4>] __inet_del_ifa+0x154/0x2b0 [<ffffffff8156d102>] inetdev_event+0x182/0x530 [<ffffffff8160f76c>] notifier_call_chain+0x4c/0x70 [<ffffffff8109d446>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814f71fd>] call_netdevice_notifiers+0x2d/0x60 [<ffffffff814f8845>] rollback_registered_many+0x105/0x220 [<ffffffff814f89a0>] rollback_registered+0x40/0x70 [<ffffffff814f9c88>] unregister_netdevice_queue+0x48/0x80 [<ffffffff814f9cdc>] unregister_netdev+0x1c/0x30 [<ffffffffa0067139>] i40e_vsi_release+0x2a9/0x2b0 [i40e] [<ffffffffa00674e8>] i40e_remove+0x128/0x2b0 [i40e] [<ffffffff813092db>] pci_device_remove+0x3b/0xb0 [<ffffffff813d26ef>] __device_release_driver+0x7f/0xf0 [<ffffffff813d3068>] driver_detach+0xb8/0xc0 [<ffffffff813d22db>] bus_remove_driver+0x9b/0x120 [<ffffffff813d36dc>] driver_unregister+0x2c/0x50 [<ffffffff81307d4c>] pci_unregister_driver+0x2c/0x90 [<ffffffffa008f9d0>] i40e_exit_module+0x10/0x23 [i40e] [<ffffffff810dad0b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81013b0c>] ? do_notify_resume+0x9c/0xb0 [<ffffffff81613da9>] system_call_fastpath+0x16/0x1b Code: e5 41 57 4d 89 c7 41 56 49 89 d6 41 55 49 89 f5 41 54 53 89 cb 75 14 eb 3d 0f 1f 44 00 00 83 eb 01 74 25 4d 85 e4 74 20 4c 89 e0 <4c> 8b 60 08 4c 89 f2 4c 89 ee 48 89 c7 ff 10 4d 85 ff 74 04 41 RIP [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22i40iw: Fail open if there are no available MSI-X vectorsShiraz Saleem1-1/+6
Check number of available MSI-X vectors for i40iw. If there are no available vectors, fail the open. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22RDMA/vmw_pvrdma: Fix reporting correct opcodes for completionAdit Ranadive1-3/+28
Since the IB_WC_BIND_MW opcode has been dropped, set the correct IB WC opcode explicitly. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Bryan Tan <bryantan@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22IB/bnxt_re: Fix frame stack compilation warningLeon Romanovsky1-31/+36
Reduce stack size by dynamically allocating memory instead of declaring large struct on the stack: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_query_qp’: drivers/infiniband/hw/bnxt_re/ib_verbs.c:1600:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=] } ^ Cc: Selvin Xavier <selvin.xavier@broadcom.com> Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22IB/mlx5: fix debugfs cleanupSudip Mukherjee1-3/+3
If delay_drop_debugfs_init() fails in any of the operations to create debugfs, it is calling delay_drop_debugfs_cleanup() as part of its cleanup. But delay_drop_debugfs_cleanup() checks for 'dbg' and since we have not yet pointed 'dbg' to the debugfs we need to cleanup, the cleanup fails and we are left with stray debugfs elements and also a memory leak. Fixes: 4a5fd5d2965c ("IB/mlx5: Add necessary delay drop assignment") Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22IB/ocrdma: fix incorrect fall-through on switch statementColin Ian King1-0/+3
In the case where mbox_status is OCRDMA_MBX_STATUS_FAILED and add_status is OCRDMA_MBX_STATUS_FAILED err_num is assigned -EAGAIN however the case OCRDMA_MBX_STATUS_FAILED is missing a break and falls through to the default case which then re-assigns err_num to -EFAULT. Fix this so that err_num is assigned to -EAGAIN for the add_status OCRDMA_MBX_STATUS_FAILED case and -EFAULT otherwise. Detected by CoverityScan CID#703125 ("Missing break in switch") Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22IB/ipoib: Suppress the retry related completion errorsSantosh Shilimkar1-5/+11
IPoIB doesn't support transport/rnr retry schemes as per RFC so those errors are expected. No need to flood the log files with them. Tested-by: Michael Nowak <michael.nowak@oracle.com> Tested-by: Rafael Alejandro Peralez <rafael.peralez@oracle.com> Tested-by: Liwen Huang <liwen.huang@oracle.com> Tested-by: Hong Liu <hong.x.liu@oracle.com> Reviewed-by: Mukesh Kacker <mukesh.kacker@oracle.com> Reported-by: Rajiv Raja <rajiv.raja@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22Input: elan_i2c - extend Flash-Write delayKT Liao1-1/+1
The original 20ms delay is only marginally enough delay after a block write operation during firmware update. Let's increase the delay to ensure that the controller finishes up storing the page to avoid failures in the firmware updates. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-22iw_cxgb4: remove the stid on listen create failureSteve Wise1-1/+1
If a listen create fails, then the server tid (stid) is incorrectly left in the stid idr table, which can cause a touch-after-free if the stid is looked up and the already freed endpoint is touched. So make sure and remove it in the error path. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22iw_cxgb4: drop listen destroy replies if no ep foundSteve Wise1-0/+5
If the thread waiting for a CLOSE_LISTSRV_RPL times out and bails, then we need to handle a subsequent CPL if it arrives and the stid has been released. In this case silently drop it. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22iw_cxgb4: put ep reference in pass_accept_req()Steve Wise1-1/+1
The listening endpoint should always be dereferenced at the end of pass_accept_req(). Fixes: f86fac79afec ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints") Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22Merge tag 'for-linus-4.14b-rc2-tag' of ↵Linus Torvalds1-63/+67
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "A fix for a missing __init annotation and two cleanup patches" * tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen, arm64: drop dummy lookup_address() xen: don't compile pv-specific parts if XEN_PV isn't configured xen: x86: mark xen_find_pt_base as __init
2017-09-22Merge branch 'for-linus' of ↵Linus Torvalds6-9/+36
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A couple of bug fixes: memory management, perf, cio, dasd and scm_blk. - A larger change in regard to the CPU topology to improve performance for systems running under z/VM or KVM. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/topology: enable / disable topology dynamically s390/topology: alternative topology for topology-less machines s390/mm: fix write access check in gup_huge_pmd() s390/mm: make pmdp_invalidate() do invalidation only s390/cio: recover from bad paths s390/scm_blk: consistently use blk_status_t as error type s390/dasd: fix race during dasd initialization s390/perf: fix bug when creating per-thread event
2017-09-22Merge branch 'linus' of ↵Linus Torvalds6-50/+46
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix compiler warnings in inside-secure - Fix LS1021A support in caam - Avoid using RBP in x86 crypto code - Fix bug in talitos that prevents hashing with algif - Fix bugs talitos hashing code that cause incorrect hash result - Fix memory freeing path bug in drbg - Fix af_alg crash when two SG lists are chained * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: af_alg - update correct dst SGL entry crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel crypto: inside-secure - fix gcc-4.9 warnings crypto: talitos - Don't provide setkey for non hmac hashing algs crypto: talitos - fix hashing crypto: talitos - fix sha224 crypto: x86/twofish - Fix RBP usage crypto: sha512-avx2 - Fix RBP usage crypto: x86/sha256-ssse3 - Fix RBP usage crypto: x86/sha256-avx2 - Fix RBP usage crypto: x86/sha256-avx - Fix RBP usage crypto: x86/sha1-ssse3 - Fix RBP usage crypto: x86/sha1-avx2 - Fix RBP usage crypto: x86/des3_ede - Fix RBP usage crypto: x86/cast6 - Fix RBP usage crypto: x86/cast5 - Fix RBP usage crypto: x86/camellia - Fix RBP usage crypto: x86/blowfish - Fix RBP usage crypto: drbg - fix freeing of resources
2017-09-22IB/core: Fix for core panicAlex Estrin1-2/+2
Build with the latest patches resulted in panic: 11384.486289] BUG: unable to handle kernel NULL pointer dereference at (null) [11384.486293] IP: (null) [11384.486295] PGD 0 [11384.486295] P4D 0 [11384.486296] [11384.486299] Oops: 0010 [#1] SMP ......... snip ...... [11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O 4.13.0-a-stream-20170825 #1 [11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 [11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000 [11384.486420] RIP: 0010: (null) [11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206 [11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX: ffffc90007fef978 [11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88084cfe8000 [11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09: ffff88084dce4080 [11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12: ffff88105af65a00 [11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15: 000000000000c000 [11384.486424] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000001406f0 [11384.486426] Call Trace: [11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core] [11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core] [11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib] [11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib] [11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core] [11384.486452] join_handler+0x101/0x220 [ib_core] [11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core] [11384.486459] recv_handler+0x3a/0x60 [ib_core] [11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core] [11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core] [11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core] [11384.486472] process_one_work+0x149/0x360 [11384.486474] worker_thread+0x4d/0x3c0 [11384.486487] kthread+0x109/0x140 [11384.486488] ? rescuer_thread+0x380/0x380 [11384.486489] ? kthread_park+0x60/0x60 [11384.486490] ? kthread_park+0x60/0x60 [11384.486493] ret_from_fork+0x25/0x30 [11384.486493] Code: Bad RIP value. [11384.486493] Code: Bad RIP value. [11384.486496] RIP: (null) RSP: ffffc90007fef970 [11384.486497] CR2: 0000000000000000 [11384.486531] ---[ end trace b1acec6fb4ff6e75 ]--- [11384.532133] Kernel panic - not syncing: Fatal exception [11384.536541] Kernel Offset: disabled [11384.969491] ---[ end Kernel panic - not syncing: Fatal exception [11384.976875] sched: Unexpected reschedule of offline CPU#1! [11384.983646] ------------[ cut here ]------------ Rdma device driver may not have implemented (*get_link_layer)() so it can not be called directly. Should use appropriate helper function. Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Fixes: 523633359224 ("IB/core: Fix the validations of a multicast LID in attach or detach operations") Cc: stable@kernel.org # 4.13 Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-22drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintfArvind Yadav1-0/+1
Free memory region, if arm_pmu_acpi_probe is not successful. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-09-22iommu/of: Remove PCI host bridge node checkRobin Murphy1-4/+1
of_pci_iommu_init() tries to be clever and stop its alias walk at the device represented by master_np, in case of weird PCI topologies where the bridge to the IOMMU and the rest of the system is not at the root. It turns out this is a bit short-sighted, since there are plenty of other callers of pci_for_each_dma_alias() which would also need the same behaviour in that situation, and the only platform so far with such a topology (Cavium ThunderX2) already solves it more generally via a PCI quirk. As this check is effectively redundant, and returning a boolean value as an int is a bit broken anyway, let's just get rid of it. Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Fixes: d87beb749281 ("iommu/of: Handle PCI aliases properly") Signed-off-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-21net: phy: Fix truncation of large IRQ numbers in phy_attached_print()Geert Uytterhoeven1-1/+1
Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is not enough to represent interrupt numbers on all architectures. Hence PHY interrupt numbers may be truncated during printing. Increase the buffer size from 4 to 8 bytes to fix this. Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A crash fix and corresponding regression test enabling for the crash scenario. The unit test for this crash is available in ndctl-v58.2. This branch has received a build success notification from the 0day-kbuild robot over 148 configs. The fix is tagged for -stable / backport to 4.13" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, namespace: fix btt claim class crash tools/testing/nvdimm: disable labels for nfit_test.1
2017-09-21Input: uinput - avoid crash when sending FF request to device going awayDmitry Torokhov1-18/+21
If FF request comes in while uinput device is going away, uinput_request_send() will fail with -ENODEV, and uinput_request_submit() will attempt to mark the slot as unused by calling uinput_request_done(). Unfortunately in this case we haven't initialized request->done completion yet, and we get a crash: [ 39.402036] BUG: spinlock bad magic on CPU#1, fftest/3108 [ 39.402046] lock: 0xffff88006a93bb00, .magic: 00000000, .owner: /39, .owner_cpu: 1217155072 [ 39.402055] CPU: 1 PID: 3108 Comm: fftest Tainted: G W 4.13.0+ #15 [ 39.402059] Hardware name: LENOVO 20HQS0EG02/20HQS0EG02, BIOS N1MET37W (1.22 ) 07/04/2017 [ 39.402064] 0000000000000086 f0fad82f3ceaa120 ffff88006a93b9a0 ffffffff9de941bb [ 39.402077] ffff88026df8ae00 ffff88006a93bb00 ffff88006a93b9c0 ffffffff9dca62b7 [ 39.402088] ffff88006a93bb00 ffff88006a93baf8 ffff88006a93b9e0 ffffffff9dca62e7 [ 39.402099] Call Trace: [ 39.402112] [<ffffffff9de941bb>] dump_stack+0x4d/0x63 [ 39.402123] [<ffffffff9dca62b7>] spin_dump+0x97/0x9c [ 39.402130] [<ffffffff9dca62e7>] spin_bug+0x2b/0x2d [ 39.402138] [<ffffffff9dca6373>] do_raw_spin_lock+0x28/0xfd [ 39.402147] [<ffffffff9e3055cd>] _raw_spin_lock_irqsave+0x19/0x1f [ 39.402154] [<ffffffff9dca05b7>] complete+0x1d/0x48 [ 39.402162] [<ffffffffc04f30af>] 0xffffffffc04f30af [ 39.402167] [<ffffffffc04f468c>] 0xffffffffc04f468c [ 39.402177] [<ffffffff9dd59c16>] ? __slab_free+0x22f/0x359 [ 39.402184] [<ffffffff9dcc13e9>] ? tk_clock_read+0xc/0xe [ 39.402189] [<ffffffffc04f471f>] 0xffffffffc04f471f [ 39.402195] [<ffffffff9dc9ffe5>] ? __wake_up+0x44/0x4b [ 39.402200] [<ffffffffc04f3240>] ? 0xffffffffc04f3240 [ 39.402207] [<ffffffff9e0f57f3>] erase_effect+0xa1/0xd2 [ 39.402214] [<ffffffff9e0f58c6>] input_ff_flush+0x43/0x5c [ 39.402219] [<ffffffffc04f32ad>] 0xffffffffc04f32ad [ 39.402227] [<ffffffff9e0f174f>] input_flush_device+0x3d/0x51 [ 39.402234] [<ffffffff9e0f69ae>] evdev_flush+0x49/0x5c [ 39.402243] [<ffffffff9dd62d6e>] filp_close+0x3f/0x65 [ 39.402253] [<ffffffff9dd7dcf7>] put_files_struct+0x66/0xc1 [ 39.402261] [<ffffffff9dd7ddeb>] exit_files+0x47/0x4e [ 39.402270] [<ffffffff9dc6b329>] do_exit+0x483/0x969 [ 39.402278] [<ffffffff9dc73211>] ? recalc_sigpending_tsk+0x3d/0x44 [ 39.402285] [<ffffffff9dc6c7a2>] do_group_exit+0x42/0xb0 [ 39.402293] [<ffffffff9dc767e1>] get_signal+0x58d/0x5bf [ 39.402300] [<ffffffff9dc03701>] do_signal+0x37/0x53e [ 39.402307] [<ffffffff9e0f8401>] ? evdev_ioctl_handler+0xac8/0xb04 [ 39.402314] [<ffffffff9e0f8464>] ? evdev_ioctl+0x10/0x12 [ 39.402321] [<ffffffff9dd74cfa>] ? do_vfs_ioctl+0x42e/0x501 [ 39.402328] [<ffffffff9dc0170e>] prepare_exit_to_usermode+0x66/0x90 [ 39.402333] [<ffffffff9dc0181b>] syscall_return_slowpath+0xe3/0xec [ 39.402339] [<ffffffff9e305b7b>] int_ret_from_sys_call+0x25/0x8f While we could solve this by simply initializing the completion earlier, we are better off rearranging the code a bit so we avoid calling complete() on requests that we did not send out. This patch consolidates marking request slots as free in one place (in uinput_request_submit(), the same place where we acquire them) and having everyone else simply signal completion of the requests. Fixes: 00ce756ce53a ("Input: uinput - mark failed submission requests as free") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21Input: uinput - avoid FF flush when destroying deviceDmitry Torokhov2-3/+28
Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by: Clément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-09-21net: stmmac: Cocci spatch "of_table"Thomas Meyer1-0/+1
Make sure (of/i2c/platform)_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Use default values loaded from EEPROM/OTP after resetNisar Sayed1-1/+0
Use default value of auto duplex and auto speed values loaded from EEPROM/OTP after reset. The LAN78xx allows platform configurations to be loaded from EEPROM/OTP. Ex: When external phy is connected, the MAC can be configured to have correct auto speed, auto duplex, auto polarity configured from the EEPROM/OTP. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZENisar Sayed1-5/+4
Allow EEPROM write for less than MAX_EEPROM_SIZE Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21lan78xx: Fix for eeprom read/write when device auto suspendNisar Sayed1-4/+20
Fix for eeprom read/write when device auto suspend Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Nisar Sayed <Nisar.Sayed@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: phy: Keep reporting transceiver typeFlorian Fainelli1-1/+2
With commit 2d55173e71b0 ("phy: add generic function to support ksetting support"), we lost the ability to report the transceiver type like we used to. Now that we have added back the transceiver type to ethtool_link_settings, we can report it back like we used to and have no loss of information. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: qcom/emac: add software control for pause frame modeTimur Tabi4-0/+58
The EMAC has the option of sending only a single pause frame when flow control is enabled and the RX queue is full. Although sending only one pause frame has little value, this would allow admins to enable automatic flow control without having to worry about the EMAC flooding nearby switches with pause frames if the kernel hangs. The option is enabled by using the single-pause-mode private flag. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21hv_netvsc: fix send buffer failure on MTU changeAlex Ng3-5/+12
If MTU is changed the host would reject the send buffer change. This problem is result of recent change to allow changing send buffer size. Every time we change the MTU, we store the previous net_device section count before destroying the buffer, but we don’t store the previous section size. When we reinitialize the buffer, its size is calculated by multiplying the previous count and previous size. Since we continuously increase the MTU, the host returns us a decreasing count value while the section size is reinitialized to 1728 bytes every time. This eventually leads to a condition where the calculated buf_size is so small that the host rejects it. Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size") Signed-off-by: Alex Ng <alexng@microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21Merge tag 'mtd/fixes-for-4.14-rc2' of git://git.infradead.org/linux-mtdLinus Torvalds3-6/+45
Pull mtd fixes from Boris Brezillon: "SPI NOR: - Fix the SFDP parsing code (bugs reported by Geert Uytterhoeven) NAND: - Fix a resource leak in the lpc32xx_mlc driver - Fix a build warning in the core" * tag 'mtd/fixes-for-4.14-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: remove unused blockmask variable mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe() mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp() mtd: spi-nor: Check consistency of the memory size extracted from the SFDP
2017-09-21Merge tag 'drm-fixes-for-v4.14-rc2' of ↵Linus Torvalds13-109/+109
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "amdkfd, i915 and exynos fixes. I've ended up on unplanned + planned leave this week, but there were some fixes I decided to dequeue, some amdkfd bits missed the next pull but they are pretty trivial, so I included them. I'm not sure I'll see much else for rc2, lots of people are at XDC" * tag 'drm-fixes-for-v4.14-rc2' of git://people.freedesktop.org/~airlied/linux: drm/exynos/hdmi: Fix unsafe list iteration drm: exynos: include linux/irq.h drm/exynos: Fix suspend/resume support drm/exynos: Fix locking in the suspend/resume paths drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos() drm/i915/cnp: set min brightness from VBT Revert "drm/i915/bxt: Disable device ready before shutdown command" drm/i915/bxt: set min brightness from VBT drm/i915: Fix an error handling in 'intel_framebuffer_init()' drm/i915/gvt: Fix incorrect PCI BARs reporting drm/amdkfd: pass queue's mqd when destroying mqd drm/amdkfd: remove memset before memcpy uapi linux/kfd_ioctl.h: only use __u32 and __u64
2017-09-21Merge tag 'dma-mapping-4.14-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-10/+9
Pull dma mapping fix from Christoph Hellwig: "A fix for a fix that went in this merge window from Arnd" * tag 'dma-mapping-4.14-2' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix rmem_dma_device_init regression
2017-09-21Merge tag 'irqchip-4.14-2' of ↵Thomas Gleixner3-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates from Marc Zyngier - A GICv3 initialisation fix when some CPUs fail to be brought up - A GICv4 compile fix for GCC 4.5 (!) - A MIPS-GIC fix for the PCIe support
2017-09-20net: hns3: Fix for pri to tc mapping in TMYunsheng Lin3-9/+12
Current mapping between pri and tc is one to one, so user can't map multi priorities to the same tc. This patch changes the mapping to many to one. Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix for setting rss_size incorrectlyYunsheng Lin3-40/+38
rss_size is 1, 2, 4, 8, 16, 32, 64, 128, but acutal tc queue size can be any u16 less than 128. If tc queue size is 5, we set the rss_size to 8, indirection table will be used to limit the size of actual queue size. It may cause dropping of receiving packet in hardware if rss_size is not set correctly. For now, each TC has the same rss size. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix typo error for feild in hclge_tmYunsheng Lin2-12/+12
This patch fixes a typo error for feild, which should be field. Fixes: 848440544b41f ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix for rx priv buf allocation when DCB is not supportedYunsheng Lin1-0/+10
When hdev doesn't support DCB, rx private buffer is not allocated, otherwise there is not enough buffer for rx shared buffer, causing buffer allocation process to fail. This patch fixes by checking the dcb capability in hclge_rx_buffer_calc. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix for rx_priv_buf_alloc not setting rx shared bufferYunsheng Lin2-1/+6
rx_priv_buf_alloc is used to tell hardware how much buffer is used for rx direction, right now only the private buffer is assigned. For ae_dev that doesn't support DCB, private rx buffer is assigned to zero, only shared rx buffer is used. So not setting the shared rx buffer cause dropping of packet in SSU. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix for not setting rx private buffer size to zeroYunsheng Lin1-2/+14
When rx private buffer is disabled, there may be some case that the rx private buffer is not set to zero, which may cause buffer allocation process to fail. This patch fixes this problem by setting priv->enable to 0 and priv->buf_size to zero when rx private buffer is disabled. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix for DEFAULT_DV when dev doesn't support DCBYunsheng Lin2-1/+6
When ae_dev doesn't support DCB, DEFAULT_DV must be set to a lower value, otherwise the buffer allocation process will fail. This patch fix it by setting it to 30K bytes. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Fix initialization when cmd is not supportedYunsheng Lin4-16/+31
When ae_dev doesn't support DCB, rx_priv_wl_config, common_thrd_config and tm_qs_bp_cfg can't be called, otherwise cmd return fail, which causes the hclge module initialization process to fail. This patch fix it by adding a DCB capability flag to check if the ae_dev support DCB. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: hns3: Cleanup for ROCE capability flag in ae_devYunsheng Lin3-27/+19
This patch add the ROCE supported flag in the driver_data field of pci_device_id, delete roce_pci_tbl and change HNAE_DEV_SUPPORT_ROCE_B to HNAE3_DEV_SUPPORT_ROCE_B. This cleanup is done in order to support adding capability in pci_device_id and to fix initialization failure when cmd is not supported. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-08 04:57:51 +0000