summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2010-11-08xen-pcifront: fix PCI reference leakJiri Slaby1-2/+3
Stanse found that when pdev is found and has no driver a reference is leaked in pcifront_common_process. So add pci_dev_put there. For the pdev == NULL case, pci_dev_put(NULL) is fine. [v2: Updated to not dereference pcidev->dev per Milton's observation] Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Milton Miller <miltonm@bga.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-08xen-pcifront: Remove duplicate inclusion of headers.Jesper Juhl1-1/+0
In drivers/pci/xen-pcifront.c the xen/xenbus.h header is included twice - once is enough. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-28Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds5-2/+1184
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-28Merge branch 'linux-next' of ↵Linus Torvalds15-22/+206
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (27 commits) x86: allocate space within a region top-down x86: update iomem_resource end based on CPU physical address capabilities x86/PCI: allocate space from the end of a region, not the beginning PCI: allocate bus resources from the top down resources: support allocating space within a region from the top down resources: handle overflow when aligning start of available area resources: ensure callback doesn't allocate outside available space resources: factor out resource_clip() to simplify find_resource() resources: add a default alignf to simplify find_resource() x86/PCI: MMCONFIG: fix region end calculation PCI: Add support for polling PME state on suspended legacy PCI devices PCI: Export some PCI PM functionality PCI: fix message typo PCI: log vendor/device ID always PCI: update Intel chipset names and defines PCI: use new ccflags variable in Makefile PCI: add PCI_MSIX_TABLE/PBA defines PCI: add PCI vendor id for STmicroelectronics x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDs PCI: OLPC: Only enable PCI configuration type override on XO-1 ...
2010-10-27proc_bus_pci_ioctl: remove pointless BKL usageLinus Torvalds1-3/+0
The BKL was pushed into this function when it was converted to use the unlocked_ioctl interface, but nothing that the function touches is actually protected by the BKL. So just remove the BKL entirely, so that we finally can get a realistic system build without the BKL being enabled at all. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26PCI: allocate bus resources from the top downBjorn Helgaas1-5/+48
Allocate space from the highest-address PCI bus resource first, then work downward. Previously, we looked for space in PCI host bridge windows in the order we discovered the windows. For example, given the following windows (discovered via an ACPI _CRS method): pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] pci_root PNP0A03:00: host bridge window [mem 0xbff00000-0xf7ffffff] pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff] pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff] pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff] we attempted to allocate from [mem 0x000a0000-0x000bffff] first, then [mem 0x000c0000-0x000effff], and so on. With this patch, we allocate from [mem 0xff980000-0xff980fff] first, then [mem 0xff97c000-0xff97ffff], [mem 0xfed20000-0xfed9ffff], etc. Allocating top-down follows Windows practice, so we're less likely to trip over BIOS defects in the _CRS description. On the machine above (a Dell T3500), the [mem 0xbff00000-0xbfffffff] region doesn't actually work and is likely a BIOS defect. The symptom is that we move the AHCI controller to 0xbff00000, which leads to "Boot has failed, sleeping forever," a BUG in ahci_stop_engine(), or some other boot failure. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c43 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=620313 Reference: https://bugzilla.redhat.com/show_bug.cgi?id=629933 Reported-by: Brian Bloniarz <phunge0@hotmail.com> Reported-and-tested-by: Stefan Becker <chemobejk@gmail.com> Reported-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-24Merge branch 'for-next' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
2010-10-22Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds8-55/+49
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: remove in_workqueue_context() workqueue: Clarify that schedule_on_each_cpu is synchronous memory_hotplug: drop spurious calls to flush_scheduled_work() shpchp: update workqueue usage pciehp: update workqueue usage isdn/eicon: don't call flush_scheduled_work() from diva_os_remove_soft_isr() workqueue: add and use WQ_MEM_RECLAIM flag workqueue: fix HIGHPRI handling in keep_working() workqueue: add queue_work and activate_work trace points workqueue: prepare for more tracepoints workqueue: implement flush[_delayed]_work_sync() workqueue: factor out start_flush_work() workqueue: cleanup flush/cancel functions workqueue: implement alloc_ordered_workqueue() Fix up trivial conflict in fs/gfs2/main.c as per Tejun
2010-10-22Merge commit 'konrad/stable/xen-pcifront-0.8.2' into ↵Stefano Stabellini8-227/+1239
2.6.36-rc8-initial-domain-v6
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-0/+1
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds1-6/+7
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: block: autoconvert trivial BKL users to private mutex drivers: autoconvert trivial BKL users to private mutex ipmi: autoconvert trivial BKL users to private mutex mac: autoconvert trivial BKL users to private mutex mtd: autoconvert trivial BKL users to private mutex scsi: autoconvert trivial BKL users to private mutex Fix up trivial conflicts (due to addition of private mutex right next to deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-21Merge branch 'x86-iommu-for-linus' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, iommu: Update header comments with appropriate naming ia64, iommu: Add a dummy iommu_table.h file in IA64. x86, iommu: Fix IOMMU_INIT alignment rules x86, doc: Adding comments about .iommu_table and its neighbors. x86, iommu: Utilize the IOMMU_INIT macros functionality. x86, VT-d: Make Intel VT-d IOMMU use IOMMU_INIT_* macros. x86, GART/AMD-VI: Make AMD GART and IOMMU use IOMMU_INIT_* macros. x86, calgary: Make Calgary IOMMU use IOMMU_INIT_* macros. x86, xen-swiotlb: Make Xen-SWIOTLB use IOMMU_INIT_* macros. x86, swiotlb: Make SWIOTLB use IOMMU_INIT_* macros. x86, swiotlb: Simplify SWIOTLB pci_swiotlb_detect routine. x86, iommu: Add proper dependency sort routine (and sanity check). x86, iommu: Make all IOMMU's detection routines return a value. x86, iommu: Add IOMMU_INIT macros, .iommu_table section, and iommu_table_entry structure
2010-10-20Merge branch 'linus' into irq/coreIngo Molnar1-0/+20
Merge reason: update to almost-final-.36 Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18xen-pcifront: Xen PCI frontend driver.Ryan Wilson3-0/+1171
This is a port of the 2.6.18 Xen PCI front driver with fixes to make it build under 2.6.34 and later (for the full list of changes: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git historic/xen-pcifront-0.1). It also includes the fixes to make it work properly. [v2: Updated Kconfig, removed crud, added Reviewed-by] [v3: Added 'static', fixed grant table leak, redid Kconfig] [v4: Added one more 'static' and removed comments] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Jan Beulich <JBeulich@novell.com>
2010-10-18msi: Introduce default_[teardown|setup]_msi_irqs with fallback.Thomas Gleixner1-2/+12
Introduce an override for the arch_[teardown|setup]_msi_irqs that can be utilized to fallback to the default arch_* code. If a platform wants to utilize the code paths defined in driver/pci/msi.c it has to define HAVE_DEFAULT_MSI_TEARDOWN_IRQS or HAVE_DEFAULT_MSI_SETUP_IRQS. Otherwise the old mechanism of over-ridding the arch_* works fine. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: x86@kernel.org
2010-10-18x86/PCI: Export pci_walk_bus function.Konrad Rzeszutek Wilk1-0/+1
In preperation of modularizing Xen-pcifront the pci_walk_bus needs to be exported so that the xen-pcifront module can walk call the pci subsystem to walk the PCI devices and claim them. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> [http://marc.info/?l=linux-pci&m=126149958010298&w=2]
2010-10-18Update broken web addresses in the kernel.Justin P. Mattock1-1/+2
The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-18shpchp: update workqueue usageTejun Heo4-30/+25
* Rename shpchp_wq to shpchp_ordered_wq and add non-ordered shpchp_wq which is used instead of the system workqueue. This is to remove the use of flush_scheduled_work() which is deprecated and scheduled for removal. * With cmwq in place, there's no point in creating workqueues lazily. Create both shpchp_wq and shpchp_ordered_wq upfront. * Include workqueue.h from shpchp.h. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-18pciehp: update workqueue usageTejun Heo4-25/+24
* Rename pciehp_wq to pciehp_ordered_wq and add non-ordered pciehp_wq which is used instead of the system workqueue. This is to remove the use of flush_scheduled_work() which is deprecated and scheduled for removal. * With cmwq in place, there's no point in creating workqueues lazily. Create both pciehp_wq and pciehp_ordered_wq upfront. * Include workqueue.h from pciehp.h. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: Add support for polling PME state on suspended legacy PCI devicesMatthew Garrett1-0/+77
Not all hardware vendors hook up the PME line for legacy PCI devices, meaning that wakeup events get lost. The only way around this is to poll the devices to see if their state has changed, so add support for doing that on legacy PCI devices that aren't part of the core chipset. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: Export some PCI PM functionalityMatthew Garrett1-3/+0
It's helpful to have some extra PCI power management functions available to platform code, so move the declarations to an exported header. Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: fix message typoBjorn Helgaas1-1/+1
I missed the closing parenthesis on "(PCI address ...)". Acked-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: log vendor/device ID alwaysBjorn Helgaas1-2/+2
Previously we had to have CONFIG_PCI_DEBUG=y or CONFIG_DYNAMIC_DEBUG=y to turn on this printk, but I think the IDs are valuable enough that it's worth putting them in the log always. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: use new ccflags variable in Makefilematt mooney1-3/+1
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: add PCI_MSIX_TABLE/PBA definesHidetoshi Seto1-2/+2
These are already defined in pcilib's pci/header.h but not in kernel's linux/pci_regs.h. Copy them to avoid using magic numbers. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI: add quirk for non-symmetric-mode irq routing to versions 0 and 4 of the ↵Neil Horman1-0/+31
MCP55 northbridge A long time ago I worked on a RHEL5 bug in which kdump hung during boot on a set of systems. The systems hung because they never received timer interrupts during calibrate_delay. These systems also all had Opteron processors on a hypertransport bus, bridged to a pci bus via an Nvidia MCP55 northbridge chip. After much wrangling I managed to learn from Nvidia that they have an undocumented register in some versions of that chip which control how legacy interrupts are send to the cpu complex when the ioapic isn't active. Nvidia defaults this register to only send legacy interrupts to the BSP, so if kdump happens to boot on an AP, we never get timer interrupts and boom. I had initially used this quirk as a workaround, with my intent being to move apic initalization to an earlier point in the boot process, so the setting of the register would be irrelevant. Given the work involved in doing that however, the fragile nature of the apic initalization code, and the fact that, over the 2 years since we found this bug, the MCP55 is the only chip which seems to have this issue, I've figure at this point its likely safer to just carry the quirk around. By setting the referenced bits in this hidden register, interrupts will be broadcast to all cpus when the ioapic isn't active on the above described systems. Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI/PCIe/AER: Disable native AER service if BIOS has precedenceRafael J. Wysocki4-2/+39
There is a design issue related to PCIe AER and _OSC that the BIOS may be asked to grant control of the AER service even if some Hardware Error Source Table (HEST) entries contain information meaning that the BIOS really should control it. Namely, pcie_port_acpi_setup() calls pcie_aer_get_firmware_first() that determines whether or not the AER service should be controlled by the BIOS on the basis of the HEST information for the given PCIe port. The BIOS is asked to grant control of the AER service for a PCIe Root Complex if pcie_aer_get_firmware_first() returns 'false' for at least one root port in that complex, even if all of the other root ports' HEST entries have the FIRMWARE_FIRST flag set (and none of them has the GLOBAL flag set). However, if the AER service is controlled by the kernel, that may interfere with the BIOS' handling of the error sources having the FIRMWARE_FIRST flag. Moreover, there may be PCIe endpoints that have the FIRMWARE_FIRST flag set in HEST and are attached to the root ports in question, in which case it also may be unsafe to ask the BIOS for control of the AER service. For this reason, introduce a function checking if there's at least one PCIe-related HEST entry with the FIRMWARE_FIRST flag set and disable the native AER service altogether if this function returns 'true'. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI hotplug: ibmphp-hpc: semaphore cleanupThomas Gleixner1-2/+2
Get rid of init_MUTEX[_LOCKED]() and use sema_init() instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI: aerdrv: fix uninitialized variable warningBill Pemberton1-1/+1
quiet the warning about use of uninitialized e_src in aer_isr() e_src is initialized by get_e_source() Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI: kill BKL in /proc/pciArnd Bergmann1-3/+1
All operations in the pci procfs ioctl functions are atomic, so no lock is needed here. Also add a compat_ioctl method, since all the commands are compatible in 32 bit mode. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Tejun Heo <tj@kernel.org> Cc: linux-pci@vger.kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI: Adjust confusing if indentation in pcie_get_readrqJulia Lawall1-1/+1
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15llseek: automatically add .llseek fopArnd Bergmann1-0/+1
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-12x86: Speed up the irq_remapped check in hot pathesThomas Gleixner1-7/+0
irq_2_iommu is in struct irq_cfg, so we can do the irq_remapped check based on irq_cfg instead of going through a lookup function. That's especially interesting in the eoi_ioapic_irq() hotpath. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12intr_remap: Simplify the code furtherThomas Gleixner1-84/+29
Having irq_2_iommu in struct irq_cfg allows further simplifications. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12intr_remap: Use irq_2_iommu in struct irq_cfgThomas Gleixner1-36/+3
Switch the intr_remapping code to use the irq_2_iommu struct in irg_cfg. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12x86: Embedd irq_2_iommu into irq_cfgThomas Gleixner1-7/+0
That interrupt remapping code is x86 specific and tied to the io_apic code. No need for separate allocator functions in the interrupt remapping code. This allows to simplify the code and irq_2_iommu is small (13 bytes on 64bit) so it's not a real problem even if interrupt remapping is runtime disabled. If it's compile time disabled the impact is zero. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: intr_remap: Remove unused functionsThomas Gleixner1-47/+0
No users. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: intr_remap: Use irq_dataThomas Gleixner1-31/+8
No need to dereference irq_desc. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: intr-remap: Free irte memory if SPARSE_IRQ=yThomas Gleixner1-0/+14
With SPARSE_IRQ=y the irte descriptors are dynamically allocated, but not freed in free_irte(). That was ok as long as the sparse irq core was not freeing irq descriptors on destroy_irq(). Now we leak the irte descriptor. Free it in free_irte(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12ht: Convert to new irq_chip functionsThomas Gleixner1-14/+8
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12dmar: Convert to new irq chip functionsThomas Gleixner1-4/+4
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <dwmw2@infradead.org>
2010-10-12pci: Cleanup the irq_desc mess in msiThomas Gleixner1-15/+9
Handing down irq_desc to msi just so that msi can access irq_desc.irq_data.msi_desc is a pretty stupid idea. The calling code can hand down a pointer to msi_desc so msi code does not need to know about the irq descriptor at all. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-12pci: Convert msi to new irq_chip functionsThomas Gleixner1-7/+7
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Russell King <linux@arm.linux.org.uk>
2010-10-05drivers: autoconvert trivial BKL users to private mutexArnd Bergmann1-6/+7
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. These drivers do not seem to be under active maintainance from my brief investigation. Apologies to those maintainers that I have missed. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2010-09-28Merge branch 'meego-7093' into idle-releaseLen Brown1-0/+20
2010-09-28Merge branch 'for-linus' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype
2010-09-27Merge git://git.infradead.org/iommu-2.6Linus Torvalds1-0/+27
* git://git.infradead.org/iommu-2.6: intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
2010-09-24intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hangLen Brown1-0/+20
When the Lenovo Ideapad S10-3 is booted with HT enabled, it hits a boot hang in the intel_idle driver. This occurs when entering ATM-C4 for the first time, unless BM_STS is first cleared. acpi_idle doesn't see this because it first checks and clears BM_STS, but it would hit the same hang if that check were disabled. http://bugs.meego.com/show_bug.cgi?id=7093 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/634702 Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-22drivers/pci/intel-iommu.c: fix build with older gcc'sAndrew Morton1-47/+43
drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw': drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here Move the offending function (and its siblings) to top-of-file, remove the forward declaration. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441 Reported-by: Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-21intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/aAdam Jackson1-2/+12
Commit 9eecabcb9a924f1e11ba670365fd4babe423045c ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space") uses a bunch of magic numbers. Provide #defines for those to make it look slightly saner. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 04:06:52 +0000