summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2.c
AgeCommit message (Collapse)AuthorFilesLines
2011-03-14bnx2: Update firmware and versionMichael Chan1-4/+4
Update 5709 mips firmware to 6.2.1a to fix iSCSI performance regression. There was an unnecessary context read in the fast path affecting performance. Update bnx2 to 2.1.6. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27drivers/net: remove some rcu sparse warningsEric Dumazet1-2/+4
Add missing __rcu annotations and helpers. minor : Fix some rcu_dereference() calls in macvtap Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-27Merge branch 'master' of ↵David S. Miller1-8/+9
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-26bnx2: Eliminate AER error messages on systems not supporting itMichael Chan1-8/+9
On PPC for example, AER is not supported and we see unnecessary AER error message without this patch: bnx2 0003:01:00.1: pci_cleanup_aer_uncorrect_error_status failed 0xfffffffb Reported-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-26Merge branch 'master' of ↵David S. Miller1-0/+4
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-01-24bnx2: Always set ETH_FLAG_TXVLANMichael Chan1-0/+4
TSO does not work if the VLAN tag is in the packet (non-accelerated). We may be able to remove this restriction in future firmware. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-24net: change netdev->features to u32Michał Mirosław1-1/+1
Quoting Ben Hutchings: we presumably won't be defining features that can only be enabled on 64-bit architectures. Occurences found by `grep -r` on net/, drivers/net, include/ [ Move features and vlan_features next to each other in struct netdev, as per Eric Dumazet's suggestion -DaveM ] Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31bnx2: Update firmware and versionMichael Chan1-4/+4
Update MIPS firmware to 6.2.1, with improved small packet performance in RSS mode, and iSCSI CID allocation bug fix on 5708. Update driver version to 2.0.21. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-31bnx2: Free IRQ before freeing status block memoryMichael Chan1-1/+12
When changing ring size, we free all memory including status block memory. If we're in INTA mode and sharing IRQ, the IRQ handler can be called and it will reference the NULL status block pointer. Because of the lockless design of the IRQ handler, there is no simple way to synchronize and prevent this. So we avoid this problem by freeing the IRQ handler before freeing the status block memory. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21Merge branch '20101221_static_const' of git://repo.or.cz/linux-2.6/trivial-modsDavid S. Miller1-22/+24
2010-12-21bnx2: remove cancel_work_sync() from remove_oneTejun Heo1-2/+0
Michael pointed out that bnx2_close() already cancels bp->reset_task and thus it is guaranteed to be idle when bnx2_remove_one() is called. Remove the unnecessary cancel_work_sync() in remove_one. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-21drivers/net/*.c: Use static constJoe Perches1-22/+24
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. Signed-off-by: Joe Perches <joe@perches.com>
2010-12-12drivers/net: don't use flush_scheduled_work()Tejun Heo1-2/+2
flush_scheduled_work() is on its way out. This patch contains simple conversions to replace flush_scheduled_work() usage with direct cancels and flushes. Directly cancel the used works on driver detach and flush them in other cases. The conversions are mostly straight forward and the only dangers are, * Forgetting to cancel/flush one or more used works. * Cancelling when a work should be flushed (ie. the work must be executed once scheduled whether the driver is detaching or not). I've gone over the changes multiple times but it would be much appreciated if you can review with the above points in mind. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Divy Le Ray <divy@chelsio.com> Cc: e1000-devel@lists.sourceforge.net Cc: Vasanthy Kolluri <vkolluri@cisco.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Andrew Gallatin <gallatin@myri.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: netdev@vger.kernel.org
2010-11-28bnx2: Remove config access to non-standard registersMichael Chan1-8/+8
In KVM passthrough mode, the driver may not have config access to non-standard registers. The BNX2_PCICFG_MISC_CONFIG config register access to setup mailbox swapping can be done using MMIO. Update version to 2.0.20. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28bnx2: Fix reset bug on 5709Eddie Wai1-7/+22
The 5709 chip requires the BNX2_MISC_NEW_CORE_CTL_DMA_ENABLE bit to be cleared and polling for pending DMAs to complete before chip reset. Without this step, we've seen NMIs during repeated resets of the chip. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-27drivers/net: use vzalloc()Eric Dumazet1-7/+2
Use vzalloc() and vzalloc_node() in net drivers Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL.Jesse Gross1-1/+1
Some cards don't support changing vlan offloading settings. Make Ethtool set_flags return -EINVAL in those cases. Reported-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21bnx2: Update bnx2 to use new vlan accleration.Jesse Gross1-69/+28
Make the bnx2 driver use the new vlan accleration model. Signed-off-by: Jesse Gross <jesse@nicira.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21vlan: Don't check for vlan group before vlan_tx_tag_present.Jesse Gross1-1/+1
Many (but not all) drivers check to see whether there is a vlan group configured before using a tag stored in the skb. There's not much point in this check since it just throws away data that should only be present in the expected circumstances. However, it will soon be legal and expected to get a vlan tag when no vlan group is configured, so remove this check from all drivers to avoid dropping the tags. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11bnx2: Enable AER on PCIE devices onlyMichael Chan1-14/+22
To prevent unnecessary error message. pci_save_state() is also moved to the end of ->probe() so that all PCI config, including AER state, will be saved. Update version to 2.0.18. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-11bnx2: Update firmware to 6.0.x.Michael Chan1-40/+25
- Improved flow control and simplified interface - Use hardware RSS indirection table instead of the slower firmware- based table - Lower latency interrupt on 5709 Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27bnx2: Use netif_set_real_num_{rx,tx}_queues()Ben Hutchings1-3/+6
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-26drivers/net: return operator cleanupEric Dumazet1-10/+10
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-02drivers/net: avoid some skb->ip_summed initializationsEric Dumazet1-1/+1
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-22bnx2: Add PCI Advanced Error Reporting support.John Feeney1-10/+34
Signed-off-by: John Feeney <jfeeney@redhat.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bnx2: Update version to 2.0.17.Michael Chan1-2/+2
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bnx2: Remove some unnecessary smp_mb() in tx fast path.Michael Chan1-1/+9
smp_mb() inside bnx2_tx_avail() is used twice in the normal bnx2_start_xmit() path (see illustration below). The full memory barrier is only necessary during race conditions with tx completion. We can speed up the tx path by replacing smp_mb() in bnx2_tx_avail() with a compiler barrier. The compiler barrier is to force the compiler to fetch the tx_prod and tx_cons from memory. In the race condition between bnx2_start_xmit() and bnx2_tx_int(), we have the following situation: bnx2_start_xmit() bnx2_tx_int() if (!bnx2_tx_avail()) BUG(); ... if (!bnx2_tx_avail()) netif_tx_stop_queue(); update_tx_index(); smp_mb(); smp_mb(); if (bnx2_tx_avail()) if (netif_tx_queue_stopped() && netif_tx_wake_queue(); bnx2_tx_avail()) With smp_mb() removed from bnx2_tx_avail(), we need to add smp_mb() to bnx2_start_xmit() as shown above to properly order netif_tx_stop_queue() and bnx2_tx_avail() to check the ring index. If it is not strictly ordered, the tx queue can be stopped forever. This improves performance by about 5% with 2 ports running bi-directional 64-byte packets. Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bnx2: Call pci_enable_msix() with actual number of vectors.Michael Chan1-4/+20
Based on original patch by Breno Leitão <leitao@linux.vnet.ibm.com>. Allocate the actual number of vectors and make use of fewer vectors if pci_enable_msix() returns > 0. We must allocate one additional vector for the cnic driver. Cc: Breno Leitão <leitao@linux.vnet.ibm.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-19bnx2: Use proper counter for net_device_stats->multicast.Michael Chan1-1/+1
We were using the wrong tx multicast counter instead of the rx multicast counter. Reported-by: Peter Snellman <peter.snellman@cinnober.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Reviewed-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18bnx2: use device model DMA APIStanislaw Gruszka1-53/+58
Use DMA API as PCI equivalents will be deprecated. This change also allow to allocate with GFP_KERNEL in some places. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-18bnx2: allocate with GFP_KERNEL flag on RX path initStanislaw Gruszka1-8/+9
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-08bnx2: 64 bit stats on all archesEric Dumazet1-18/+7
Now core network is able to handle 64 bit netdevice stats on 32 bit arches, we can provide them for bnx2, since hardware maintains some 64 bit counters. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04bnx2: Update version to 2.0.16.Michael Chan1-2/+2
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04bnx2: Dump some config space registers during TX timeout.Michael Chan1-3/+8
These config register values will be useful when the memory registers are returning 0xffffffff which has been reported. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04bnx2: Add support for skb->rxhash.Michael Chan1-1/+14
Add skb->rxhash support for TCP packets only because the bnx2 RSS hash does not hash UDP ports. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-04bnx2: Always enable MSI-X on 5709.Michael Chan1-1/+1
Minor change to use MSI-X even if there is only one CPU. This allows the CNIC driver to always have a dedicated MSI-X vector to handle iSCSI events, instead of sharing the MSI vector. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-23Merge branch 'master' of ↵David S. Miller1-7/+4
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/ipv4/ip_output.c
2010-06-17bnx2: fix dma_get_ops compilation breakageFUJITA Tomonori1-7/+4
This removes dma_get_ops() prefetch optimization in bnx2. bnx2 uses dma_get_ops() to see if dma_sync_single_for_cpu() is noop. bnx2 does prefetch if it's noop. But dma_get_ops() isn't available on all the architectures (only the architectures that uses dma_map_ops struct have it). Using dma_get_ops() in drivers leads to compilation breakage on many architectures. This patch removes dma_get_ops() and changes bnx2 to do prefetch on all the architectures. This adds useless prefetch on non-coherent architectures but this is harmless. It is also unlikely to cause the performance drop. [ Remove now unused local variable 'pdev' -DaveM ] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11bnx2: Fix compiler warning in bnx2_disable_forced_2g5().Michael Chan1-15/+28
drivers/net/bnx2.c: In function 'bnx2_disable_forced_2g5': drivers/net/bnx2.c:1489: warning: 'bmcr' may be used uninitialized in this function We fix it by checking return values from all bnx2_read_phy() and proceeding to do read-modify-write only if the read operation is successful. The related bnx2_enable_forced_2g5() is also fixed the same way. Reported-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-02bnx2: Fix hang during rmmod bnx2.Michael Chan1-1/+13
The regression is caused by: commit 4327ba435a56ada13eedf3eb332e583c7a0586a9 bnx2: Fix netpoll crash. If ->open() and ->close() are called multiple times, the same napi structs will be added to dev->napi_list multiple times, corrupting the dev->napi_list. This causes free_netdev() to hang during rmmod. We fix this by calling netif_napi_del() during ->close(). Also, bnx2_init_napi() must not be in the __devinit section since it is called by ->open(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Use netif_carrier_off() to prevent timeout.Michael Chan1-9/+5
Based on original patch from Stanislaw Gruszka <sgruszka@redhat.com>. Using netif_carrier_off() is better than updating all the ->trans_start on all the tx queues. netif_carrier_off() needs to be called after bnx2_disable_int_sync() to guarantee no race conditions with the serdes timers that can modify the carrier state. If the chip or phy is reset, carrier will turn back on when we get the link interrupt. If there is no reset, we need to turn carrier back on in bnx2_netif_start(). Again, the phy_lock prevents race conditions with the serdes timers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Update 5709 MIPS firmware and version to 2.0.15.Michael Chan1-3/+3
New firmware fixes a performance regression on small packets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17bnx2: Fix register printouts during NETEV_WATCHDOG.Eddie Wai1-3/+12
Dump the correct MCP registers and add EMAC_RX_STATUS register during NETDEV_WATCHDOG for debugging. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bnx2: Add prefetches to rx path.Michael Chan1-3/+13
Add prefetches of the skb and the next rx descriptor to speed up rx path. Use prefetchw() for the skb [suggested by Eric Dumazet]. The rx descriptor is in skb->data which is mapped for streaming mode DMA. Eric Dumazet pointed out that we should not prefetch the data before dma_sync. So we prefetch only if dma_sync is no_op on the system. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-06bnx2: Add GRO support.Michael Chan1-3/+3
And turn on NETIF_F_GRO by default [requested by DaveM]. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-02Merge branch 'master' of ↵David S. Miller1-21/+27
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-04-27bnx2: Update version to 2.0.9.Michael Chan1-2/+2
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Prevent "scheduling while atomic" warning with cnic, bonding and vlan.Michael Chan1-18/+20
The bonding driver calls ndo_vlan_rx_register() while holding bond->lock. The bnx2 driver calls bnx2_netif_stop() to stop the rx handling while changing the vlgrp. The call also stops the cnic driver which sleeps while the bond->lock is held and cause the warning. This code path only needs to stop the NAPI rx handling while we are changing the vlgrp. Since no reset is going to occur, there is no need to stop cnic in this case. By adding a parameter to bnx2_netif_stop() to skip stopping cnic, we can avoid the warning. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27bnx2: Fix lost MSI-X problem on 5709 NICs.Michael Chan1-1/+5
It has been reported that under certain heavy traffic conditions in MSI-X mode, the driver can lose an MSI-X vector causing all packets in the associated rx/tx ring pair to be dropped. The problem is caused by the chip dropping the write to unmask the MSI-X vector by the kernel (when migrating the IRQ for example). This can be prevented by increasing the GRC timeout value for these register read and write operations. Thanks to Dell for helping us debug this problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07bnx2: use the dma state API instead of the pci equivalentsFUJITA Tomonori1-20/+20
The DMA API is preferred. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 19:56:49 +0000