summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/davinci_mmc.c
AgeCommit message (Collapse)AuthorFilesLines
2013-05-04Merge tag 'mmc-updates-for-3.10-rc1' of ↵Linus Torvalds1-16/+7
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC update from Chris Ball: "MMC highlights for 3.10: Core: - Introduce MMC_CAP2_NO_PRESCAN_POWERUP to allow skipping mmc_power_up() at boot/initialization time if it's already happened, for performance (faster boot time) reasons. - Fix a bit width test failure that resulted in old eMMC cards being put into 1-bit mode when 4-bit mode was available. - Expose fwrev/hwrev for MMCv4 parts. - Improve card removal logic in the case where the card's removed slowly; we were missing card removal events if the card retained contact with the slot pads for long enough to reply to a CMD13 while being removed. Drivers: - davinci_mmc: Support using PIO instead of DMA. - dw_mmc: Add support for Exynos4412. - mxcmmc: DT support, use slot-gpio API. - mxs-mmc: Add broken-cd/cd-inverted/non-removable DT property support. - sdhci-sirf: New sdhci-pltfm driver for CSR SiRF SoCs: SiRFprimaII: unicore ARM Cortex-A9 SiRFatlas6: unicore ARM Cortex-A9 SiRFmarco: dual core ARM Cortex-A9 SMP - sdhci-tegra: Add support for Tegra114 platforms, use mmc_of_parse()" * tag 'mmc-updates-for-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (66 commits) mmc: sdhci-tegra: fix MODULE_DEVICE_TABLE mmc: core: fix init controller performance regression, updated patch mmc: mxcmmc: enable DMA support on mpc512x mmc: mxcmmc: constify mxcmci_devtype mmc: mxcmmc: use slot-gpio API for write-protect detection mmc: mxcmmc: add mpc512x SDHC support mmc: mxcmmc: fix race conditions for host->req and host->data access mmc: mxcmmc: DT support mmc: dw_mmc: let device core setup the default pin configuration mmc: mxs-mmc: add broken-cd property mmc: mxs-mmc: add non-removable property mmc: mxs-mmc: add cd-inverted property mmc: core: call pm_runtime_put_noidle in pm_runtime_get_sync failed case mmc: mxcmmc: Fix bug when card is present during boot mmc: core: fix performance regression initializing MMC host controllers Revert "mmc: core: wait while adding MMC host to ensure root mounts successfully" mmc: atmel-mci: pio hang on block errors mmc: core: Fix bit width test failing on old eMMC cards mmc: dw_mmc: Use pr_info instead of printk mmc: dw_mmc: Check return value of regulator_enable ...
2013-04-04mmc: davinci_mmc: add DT supportManjunathappa, Prakash1-4/+66
Adds device tree support for davinci_mmc. Also add binding documentation. As of now tested for non-dma PIO mode and without GPIO card_detect/ write_protect option because of dependencies on EDMA and GPIO module DT support. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: davinci-linux-open-source@linux.davincidsp.com Cc: devicetree-discuss@lists.ozlabs.org Cc: cjb@laptop.org Cc: Sekhar Nori <nsekhar@ti.com> Cc: mporter@ti.com Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-04-03ARM: davinci: mmc: derive version information from device nameManjunathappa, Prakash1-1/+17
Remove specifying mmc controller IP version information via platform data, instead specify device name so that driver derives it from platform_device_id table. Also change the clock node name to match the changed dev_id. Tested on da850-evm to make sure driver loads without clk_get failures. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Reviewed-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-03-22mmc: davinci_mmc: use module_platform_driver_probe()Jingoo Han1-12/+1
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-03-22mmc: davinci_mmc: allow driver to work without DMA resourceManjunathappa, Prakash1-4/+6
Do not return probe failure with missing DMA resources, allow driver to work in PIO mode. Tested on da850-evm by mounting partition followed by file creation and deletion. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Tested-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-10Merge tag 'mmc-merge-for-3.7-rc1' of ↵Linus Torvalds1-189/+82
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "Core: - Add DT properties for card detection (broken-cd, cd-gpios, non-removable) - Don't poll non-removable devices - Fixup/rework eMMC sleep mode/"power off notify" feature - Support eMMC background operations (BKOPS). To set the one-time programmable fuse that enables bkops on an eMMC that doesn't already have it set, you can use the "mmc bkops enable" command in: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - atmel-mci, dw_mmc, pxa-mci, dove, s3c, spear: Add device tree support - bfin_sdh: Add support for the controller in bf60x - dw_mmc: Support Samsung Exynos SoCs - eSDHC: Add ADMA support - sdhci: Support testing a cd-gpio (from slot-gpio) instead of presence bit - sdhci-pltfm: Support broken-cd DT property - tegra: Convert to only supporting DT (mach-tegra has gone DT-only)" * tag 'mmc-merge-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (67 commits) mmc: core: Fixup broken suspend and eMMC4.5 power off notify mmc: sdhci-spear: Add clk_{un}prepare() support mmc: sdhci-spear: add device tree bindings mmc: sdhci-s3c: Add clk_(enable/disable) in runtime suspend/resume mmc: core: Replace MMC_CAP2_BROKEN_VOLTAGE with test for fixed regulator mmc: sdhci-pxav3: Use sdhci_get_of_property for parsing DT quirks mmc: dt: Support "broken-cd" property in sdhci-pltfm mmc: sdhci-s3c: fix the wrong number of max bus clocks mmc: sh-mmcif: avoid oops on spurious interrupts mmc: sh-mmcif: properly handle MMC_WRITE_MULTIPLE_BLOCK completion IRQ mmc: sdhci-s3c: Fix crash on module insertion for second time mmc: sdhci-s3c: Enable only required bus clock mmc: Revert "mmc: dw_mmc: Add check for IDMAC configuration" mmc: mxcmmc: fix bug that may block a data transfer forever mmc: omap_hsmmc: Pass on the suspend failure to the PM core mmc: atmel-mci: AP700x PDC is not connected to MCI mmc: atmel-mci: DMA can be used with other controllers mmc: mmci: use clk_prepare_enable and clk_disable_unprepare mmc: sdhci-s3c: Add device tree support mmc: dw_mmc: add support for exynos specific implementation of dw-mshc ...
2012-09-19mmc: davinci_mmc: convert to DMA engine APIMatt Porter1-189/+82
Removes use of the DaVinci EDMA private DMA API and replaces it with use of the DMA engine API. Signed-off-by: Matt Porter <mporter@ti.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-04-22mmc: davinci_mmc: set MODULE_ALIAS to allow autoloadingJan Luebbe1-0/+1
Davinci MMC platform devices (as in mach-davinci/devices-da8xx.c) use "davinci_mmc" as their name. To allow autoloading of the relevant driver, the module needs to set the MODULE_ALIAS. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-27mmc: davinci: Poll status for small size transfersIdo Yariv1-1/+28
For small size non-dma sdio transactions, it is sometimes better to poll the mmc host and avoid interrupts altogether. Polling lowers the number of interrupts and context switches. Tests have shown that for small transactions, only a few polling iterations are needed, so this is worth while. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-27mmc: davinci: Eliminate spurious interruptsIdo Yariv1-6/+27
The davinci mmc interrupt handler fills the fifo, as long as the DXRDY or DRRDY bits are set in the status register. If interrupts fire during this loop, they will be handled by the handler, but the interrupt controller will still buffer these. As a result, the handler will be called again to serve these needlessly. In order to avoid these spurious interrupts, keep interrupts masked while filling the fifo. Signed-off-by: Ido Yariv <ido@wizery.com> Tested-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-27mmc: start removing enable / disable APIAdrian Hunter1-4/+0
Most parts of the enable / disable API are no longer used and can be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Venkatraman S <svenkatr@ti.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-17mmc: davinci: Add support for set_power callbackIdo Yariv1-0/+13
Some devices connected to the MMC bus are power controlled by external means. For instance, an SDIO device may be powered down/up by an external gpio line. In order to avoid toggling power from within the MMC host driver, add a set_power callback function, which will be called by set_ios upon powering down/up. Signed-off-by: Ido Yariv <ido@wizery.com> CC: Chris Ball <cjb@laptop.org> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2011-01-09mmc: davinci: add support for SDIO irq handlingAlagu Sankar1-5/+73
This patch adds support for handling SDIO interrupt on DaVinci MMC/SD controller. The patch has been tested on DM355 and DA850 EVMs with Marvell Libertas based SDIO wireless LAN card. Signed-off-by: Alagu Sankar <alagusankar@embwise.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-08mmc: davinci_mmc: Remove unnecessary semicolonJoe Perches1-1/+1
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-23mmc: Remove distinction between hw and phys segmentsMartin K. Petersen1-5/+3
We have deprecated the distinction between hardware and physical segments in the block layer. Consolidate the two limits into one in drivers/mmc/. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-05-27mmc: remove the "state" argument to mmc_suspend_host()Matt Fleming1-2/+1
Even though many mmc host drivers pass a pm_message_t argument to mmc_suspend_host() that argument isn't used the by MMC core. As host drivers are converted to dev_pm_ops they'll have to construct pm_message_t's (as they won't be passed by the PM subsystem any more) just to appease the mmc suspend interface. We might as well just delete the unused paramter. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>ZZ Acked-by: Sascha Sommer <saschasommer@freenet.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27davinci: mmc: updates to suspend/resume implementationChaithrika U S1-8/+43
Improve the suspend and resume callbacks in DaVinci MMC host controller driver. Modify the reset status of the contorller and clock during suspend and resume. Also migrate the power management callbacks from platform driver to dev_pm_ops structure. Tested on DA850/OMAP-L138 EVM. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Chaithrika U S <chaithrika@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Vipin Bhandari <vipin.bhandari@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27davinci: mmc: add a function to control reset state of the controllerChaithrika U S1-21/+16
Add a helper function which will aid in changing the reset status of the controller. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: Vipin Bhandari <vipin.bhandari@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-27davinci: mmc: pass number of SG segments as platform dataSudhakar Rajashekhara1-7/+17
On some platforms like DM355, the number of EDMA parameter slots available for EDMA_SLOT_ANY usage are few. In such cases, if MMC/SD uses 16 slots for each instance of MMC controller, then the number of slots available for other modules will be very few. By passing the number of EDMA slots to be used in MMC driver from platform data, EDMA slots available for other purposes can be controlled. Most of the platforms will not use this platform data variable. But on DM355, as the number of EDMA resources available is limited, the number of scatter- gather segments used inside the MMC driver can be 8 (passed as platform data) instead of 16. On DM355, when the number of scatter-gather segments was reduced to 8, I saw a performance difference of about 0.25-0.4 Mbytes/sec during write. Read performance variations were negligible. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-06davinci: MMC: add support for 8bit MMC cardsVipin Bhandari1-10/+35
Add support for 8bit MMC cards. The controller data width is configurable depending on the wires setting in the platform data structure. MMC 8bit is tested on OMAPL137 and MMC 4bit is tested on OMAPL138 EVM. Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Chaithrika U S <chaithrika@ti.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15davinci: mmc: add cpufreq supportChaithrika U S1-16/+84
Add cpufreq support to MMC driver. The clock divider value has to be modified according to the controller input frequency. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Cc: Linus Walleij <linus.ml.walleij@gmail.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15mmc: davinci: modify data types of EDMA related variablesSudhakar Rajashekhara1-2/+2
Currently DaVinci EDMA driver supports multiple EDMA channel controller instances. edma_alloc_channel() api returns a 32 bit value which has the channel controller number in MSB and the EDMA channel number in LSB. The variables which store the value returned by edma_alloc_channel() have to be 32 bit wide now. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Vipin Bhandari <vipin.bhandari@ti.com> Cc: Purshotam Kumar <purushotam@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15DaVinci: MMC: MMC/SD controller driver for DaVinci familyVipin Bhandari1-0/+1281
Add support for MMC/SD controller driver for all DaVinci family SoC. This patch supports davinci family SoC's DM6446, DM355, DM365 and DA830/OMAPL137. The patch has been tested on DM355 EVM. The MMCSD controller specifications for DM355 can be found at http://focus.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=spruee2c Signed-off-by: Vipin Bhandari <vipin.bhandari@ti.com> Signed-off-by: Purshotam Kumar <purushotam@ti.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>