summaryrefslogtreecommitdiff
path: root/arch/x86/xen
AgeCommit message (Collapse)AuthorFilesLines
2016-03-29xen/x86: Call cpu_startup_entry(CPUHP_AP_ONLINE_IDLE) from xen_play_dead()Boris Ostrovsky1-0/+2
This call has always been missing from xen_play dead() but until recently this was rather benign. With new cpu hotplug framework (commit 8df3e07e7f21 ("cpu/hotplug: Let upcoming cpu bring itself fully up"). however this call is required, otherwise a hot-plugged CPU will not be properly brough up (by never calling cpuhp_online_idle()) Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-03-29Merge tag 'v4.6-rc1' into for-linus-4.6Konrad Rzeszutek Wilk7-11/+21
Linux 4.6-rc1 * tag 'v4.6-rc1': (12823 commits) Linux 4.6-rc1 f2fs/crypto: fix xts_tweak initialization NTB: Remove _addr functions from ntb_hw_amd orangefs: fix orangefs_superblock locking orangefs: fix do_readv_writev() handling of error halfway through orangefs: have ->kill_sb() evict the VFS side of things first orangefs: sanitize ->llseek() orangefs-bufmap.h: trim unused junk orangefs: saner calling conventions for getting a slot orangefs_copy_{to,from}_bufmap(): don't pass bufmap pointer orangefs: get rid of readdir_handle_s thp: fix typo in khugepaged_scan_pmd() MAINTAINERS: fill entries for KASAN mm/filemap: generic_file_read_iter(): check for zero reads unconditionally kasan: test fix: warn if the UAF could not be detected in kmalloc_uaf2 mm, kasan: stackdepot implementation. Enable stackdepot for SLAB arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections mm, kasan: add GFP flags to KASAN API mm, kasan: SLAB support kasan: modify kmalloc_large_oob_right(), add kmalloc_pagealloc_oob_right() ...
2016-03-25xen/apic: Provide Xen-specific version of cpu_present_to_apicid APIC opBoris Ostrovsky1-2/+10
Currently Xen uses default_cpu_present_to_apicid() which will always report BAD_APICID for PV guests since x86_bios_cpu_apic_id is initialised to that value and is never updated. With commit 1f12e32f4cd5 ("x86/topology: Create logical package id"), this op is now called by smp_init_package_map() when deciding whether to call topology_update_package_map() which sets cpu_data(cpu).logical_proc_id. The latter (as topology_logical_package_id(cpu)) may be used, for example, by cpu_to_rapl_pmu() as an array index. Since uninitialized logical_package_id is set to -1, the index will become 64K which is obviously problematic. While RAPL code (and any other users of logical_package_id) should be careful in their assumptions about id's validity, Xen's cpu_present_to_apicid op should still provide value consistent with its own xen_apic_read(APIC_ID). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2016-03-24Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - fix hotplug bugs - fix irq live lock - fix various topology handling bugs - fix APIC ACK ordering - fix PV iopl handling - fix speling - fix/tweak memcpy_mcsafe() return value - fix fbcon bug - remove stray prototypes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msr: Remove unused native_read_tscp() x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck x86/oprofile/nmi: Add missing hotplug FROZEN handling x86/hpet: Use proper mask to modify hotplug action x86/apic/uv: Fix the hotplug notifier x86/apb/timer: Use proper mask to modify hotplug action x86/topology: Use total_cpus not nr_cpu_ids for logical packages x86/topology: Fix Intel HT disable x86/topology: Fix logical package mapping x86/irq: Cure live lock in fixup_irqs() x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known() x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt() x86/iopl: Fix iopl capability check on Xen PV x86/iopl/64: Properly context-switch IOPL on Xen PV selftests/x86: Add an iopl test x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe() x86/video: Don't assume all FB devices are PCI devices arch/x86/irq: Purge useless handler declarations from hw_irq.h x86: Fix misspellings in comments
2016-03-22Merge tag 'for-linus-4.6-rc0-tag' of ↵Linus Torvalds1-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Features and fixes for 4.6: - Make earlyprintk=xen work for HVM guests - Remove module support for things never built as modules" * tag 'for-linus-4.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: make platform-pci.c explicitly non-modular drivers/xen: make sys-hypervisor.c explicitly non-modular drivers/xen: make xenbus_dev_[front/back]end explicitly non-modular drivers/xen: make [xen-]ballon explicitly non-modular xen: audit usages of module.h ; remove unnecessary instances xen/x86: Drop mode-selecting ifdefs in startup_xen() xen/x86: Zero out .bss for PV guests hvc_xen: make early_printk work with HVM guests hvc_xen: fix xenboot for DomUs hvc_xen: add earlycon support
2016-03-20Merge branch 'core-objtool-for-linus' of ↵Linus Torvalds3-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull 'objtool' stack frame validation from Ingo Molnar: "This tree adds a new kernel build-time object file validation feature (ONFIG_STACK_VALIDATION=y): kernel stack frame correctness validation. It was written by and is maintained by Josh Poimboeuf. The motivation: there's a category of hard to find kernel bugs, most of them in assembly code (but also occasionally in C code), that degrades the quality of kernel stack dumps/backtraces. These bugs are hard to detect at the source code level. Such bugs result in incorrect/incomplete backtraces most of time - but can also in some rare cases result in crashes or other undefined behavior. The build time correctness checking is done via the new 'objtool' user-space utility that was written for this purpose and which is hosted in the kernel repository in tools/objtool/. The tool's (very simple) UI and source code design is shaped after Git and perf and shares quite a bit of infrastructure with tools/perf (which tooling infrastructure sharing effort got merged via perf and is already upstream). Objtool follows the well-known kernel coding style. Objtool does not try to check .c or .S files, it instead analyzes the resulting .o generated machine code from first principles: it decodes the instruction stream and interprets it. (Right now objtool supports the x86-64 architecture.) From tools/objtool/Documentation/stack-validation.txt: "The kernel CONFIG_STACK_VALIDATION option enables a host tool named objtool which runs at compile time. It has a "check" subcommand which analyzes every .o file and ensures the validity of its stack metadata. It enforces a set of rules on asm code and C inline assembly code so that stack traces can be reliable. Currently it only checks frame pointer usage, but there are plans to add CFI validation for C files and CFI generation for asm files. For each function, it recursively follows all possible code paths and validates the correct frame pointer state at each instruction. It also follows code paths involving special sections, like .altinstructions, __jump_table, and __ex_table, which can add alternative execution paths to a given instruction (or set of instructions). Similarly, it knows how to follow switch statements, for which gcc sometimes uses jump tables." When this new kernel option is enabled (it's disabled by default), the tool, if it finds any suspicious assembly code pattern, outputs warnings in compiler warning format: warning: objtool: rtlwifi_rate_mapping()+0x2e7: frame pointer state mismatch warning: objtool: cik_tiling_mode_table_init()+0x6ce: call without frame pointer save/setup warning: objtool:__schedule()+0x3c0: duplicate frame pointer save warning: objtool:__schedule()+0x3fd: sibling call from callable instruction with changed frame pointer ... so that scripts that pick up compiler warnings will notice them. All known warnings triggered by the tool are fixed by the tree, most of the commits in fact prepare the kernel to be warning-free. Most of them are bugfixes or cleanups that stand on their own, but there are also some annotations of 'special' stack frames for justified cases such entries to JIT-ed code (BPF) or really special boot time code. There are two other long-term motivations behind this tool as well: - To improve the quality and reliability of kernel stack frames, so that they can be used for optimized live patching. - To create independent infrastructure to check the correctness of CFI stack frames at build time. CFI debuginfo is notoriously unreliable and we cannot use it in the kernel as-is without extra checking done both on the kernel side and on the build side. The quality of kernel stack frames matters to debuggability as well, so IMO we can merge this without having to consider the live patching or CFI debuginfo angle" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits) objtool: Only print one warning per function objtool: Add several performance improvements tools: Copy hashtable.h into tools directory objtool: Fix false positive warnings for functions with multiple switch statements objtool: Rename some variables and functions objtool: Remove superflous INIT_LIST_HEAD objtool: Add helper macros for traversing instructions objtool: Fix false positive warnings related to sibling calls objtool: Compile with debugging symbols objtool: Detect infinite recursion objtool: Prevent infinite recursion in noreturn detection objtool: Detect and warn if libelf is missing and don't break the build tools: Support relative directory path for 'O=' objtool: Support CROSS_COMPILE x86/asm/decoder: Use explicitly signed chars objtool: Enable stack metadata validation on 64-bit x86 objtool: Add CONFIG_STACK_VALIDATION option objtool: Add tool to perform compile-time stack metadata validation x86/kprobes: Mark kretprobe_trampoline() stack frame as non-standard sched: Always inline context_switch() ...
2016-03-17x86/iopl/64: Properly context-switch IOPL on Xen PVAndy Lutomirski1-1/+1
On Xen PV, regs->flags doesn't reliably reflect IOPL and the exit-to-userspace code doesn't change IOPL. We need to context switch it manually. I'm doing this without going through paravirt because this is specific to Xen PV. After the dust settles, we can merge this with the 32-bit code, tidy up the iopl syscall implementation, and remove the set_iopl pvop entirely. Fixes XSA-171. Reviewewd-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Cooper <andrew.cooper3@citrix.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/693c3bd7aeb4d3c27c92c622b7d0f554a458173c.1458162709.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-17Merge branch 'x86/cleanups' into x86/urgentIngo Molnar2-5/+5
Pull in some merge window leftovers. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-15Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cpu hotplug updates from Thomas Gleixner: "This is the first part of the ongoing cpu hotplug rework: - Initial implementation of the state machine - Runs all online and prepare down callbacks on the plugged cpu and not on some random processor - Replaces busy loop waiting with completions - Adds tracepoints so the states can be followed" More detailed commentary on this work from an earlier email: "What's wrong with the current cpu hotplug infrastructure? - Asymmetry The hotplug notifier mechanism is asymmetric versus the bringup and teardown. This is mostly caused by the notifier mechanism. - Largely undocumented dependencies While some notifiers use explicitely defined notifier priorities, we have quite some notifiers which use numerical priorities to express dependencies without any documentation why. - Control processor driven Most of the bringup/teardown of a cpu is driven by a control processor. While it is understandable, that preperatory steps, like idle thread creation, memory allocation for and initialization of essential facilities needs to be done before a cpu can boot, there is no reason why everything else must run on a control processor. Before this patch series, bringup looks like this: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu bring the rest up - All or nothing approach There is no way to do partial bringups. That's something which is really desired because we waste e.g. at boot substantial amount of time just busy waiting that the cpu comes to life. That's stupid as we could very well do preparatory steps and the initial IPI for other cpus and then go back and do the necessary low level synchronization with the freshly booted cpu. - Minimal debuggability Due to the notifier based design, it's impossible to switch between two stages of the bringup/teardown back and forth in order to test the correctness. So in many hotplug notifiers the cancel mechanisms are either not existant or completely untested. - Notifier [un]registering is tedious To [un]register notifiers we need to protect against hotplug at every callsite. There is no mechanism that bringup/teardown callbacks are issued on the online cpus, so every caller needs to do it itself. That also includes error rollback. What's the new design? The base of the new design is a symmetric state machine, where both the control processor and the booting/dying cpu execute a well defined set of states. Each state is symmetric in the end, except for some well defined exceptions, and the bringup/teardown can be stopped and reversed at almost all states. So the bringup of a cpu will look like this in the future: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu bring itself up The synchronization step does not require the control cpu to wait. That mechanism can be done asynchronously via a worker or some other mechanism. The teardown can be made very similar, so that the dying cpu cleans up and brings itself down. Cleanups which need to be done after the cpu is gone, can be scheduled asynchronously as well. There is a long way to this, as we need to refactor the notion when a cpu is available. Today we set the cpu online right after it comes out of the low level bringup, which is not really correct. The proper mechanism is to set it to available, i.e. cpu local threads, like softirqd, hotplug thread etc. can be scheduled on that cpu, and once it finished all booting steps, it's set to online, so general workloads can be scheduled on it. The reverse happens on teardown. First thing to do is to forbid scheduling of general workloads, then teardown all the per cpu resources and finally shut it off completely. This patch series implements the basic infrastructure for this at the core level. This includes the following: - Basic state machine implementation with well defined states, so ordering and prioritization can be expressed. - Interfaces to [un]register state callbacks This invokes the bringup/teardown callback on all online cpus with the proper protection in place and [un]installs the callbacks in the state machine array. For callbacks which have no particular ordering requirement we have a dynamic state space, so that drivers don't have to register an explicit hotplug state. If a callback fails, the code automatically does a rollback to the previous state. - Sysfs interface to drive the state machine to a particular step. This is only partially functional today. Full functionality and therefor testability will be achieved once we converted all existing hotplug notifiers over to the new scheme. - Run all CPU_ONLINE/DOWN_PREPARE notifiers on the booting/dying processor: Control CPU Booting CPU do preparatory steps kick cpu into life do low level init sync with booting cpu sync with control cpu wait for boot bring itself up Signal completion to control cpu In a previous step of this work we've done a full tree mechanical conversion of all hotplug notifiers to the new scheme. The balance is a net removal of about 4000 lines of code. This is not included in this series, as we decided to take a different approach. Instead of mechanically converting everything over, we will do a proper overhaul of the usage sites one by one so they nicely fit into the symmetric callback scheme. I decided to do that after I looked at the ugliness of some of the converted sites and figured out that their hotplug mechanism is completely buggered anyway. So there is no point to do a mechanical conversion first as we need to go through the usage sites one by one again in order to achieve a full symmetric and testable behaviour" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) cpu/hotplug: Document states better cpu/hotplug: Fix smpboot thread ordering cpu/hotplug: Remove redundant state check cpu/hotplug: Plug death reporting race rcu: Make CPU_DYING_IDLE an explicit call cpu/hotplug: Make wait for dead cpu completion based cpu/hotplug: Let upcoming cpu bring itself fully up arch/hotplug: Call into idle with a proper state cpu/hotplug: Move online calls to hotplugged cpu cpu/hotplug: Create hotplug threads cpu/hotplug: Split out the state walk into functions cpu/hotplug: Unpark smpboot threads from the state machine cpu/hotplug: Move scheduler cpu_online notifier to hotplug core cpu/hotplug: Implement setup/removal interface cpu/hotplug: Make target state writeable cpu/hotplug: Add sysfs state interface cpu/hotplug: Hand in target state to _cpu_up/down cpu/hotplug: Convert the hotplugged cpu work to a state machine cpu/hotplug: Convert to a state machine for the control processor cpu/hotplug: Add tracepoints ...
2016-03-03xen/x86: Drop mode-selecting ifdefs in startup_xen()Boris Ostrovsky1-7/+3
Use asm/asm.h macros instead. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-03xen/x86: Zero out .bss for PV guestsBoris Ostrovsky1-0/+9
ELF spec is unclear about whether .bss must me cleared by the loader. Currently the domain builder does it when loading the guest but because it is not (or rather may not be) guaranteed we should zero it out explicitly. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-03-01arch/hotplug: Call into idle with a proper stateThomas Gleixner1-1/+1
Let the non boot cpus call into idle with the corresponding hotplug state, so the hotplug core can handle the further bringup. That's a first step to convert the boot side of the hotplugged cpus to do all the synchronization with the other side through the state machine. For now it'll only start the hotplug thread and kick the full bringup of the cpu. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: Rik van Riel <riel@redhat.com> Cc: Rafael Wysocki <rafael.j.wysocki@intel.com> Cc: "Srivatsa S. Bhat" <srivatsa@mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: http://lkml.kernel.org/r/20160226182341.614102639@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-02-29x86/xen: Mark xen_cpuid() stack frame as non-standardJosh Poimboeuf1-1/+2
objtool reports the following false positive warning: arch/x86/xen/enlighten.o: warning: objtool: xen_cpuid()+0x41: can't find jump dest instruction at .text+0x108 The warning is due to xen_cpuid()'s use of XEN_EMULATE_PREFIX to insert some fake instructions which objtool doesn't know how to decode. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/bb88399840406629e3417831dc371ecd2842e2a6.1456719558.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-24x86: Fix misspellings in commentsAdam Buchbinder2-5/+5
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: trivial@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-24x86/asm/xen: Create stack frames in xen-asm.SJosh Poimboeuf1-1/+9
xen_irq_enable_direct(), xen_restore_fl_direct(), and check_events() are callable non-leaf functions which don't honor CONFIG_FRAME_POINTER, which can result in bad stack traces. Create stack frames for them when CONFIG_FRAME_POINTER is enabled. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/a8340ad3fc72ba9ed34da9b3af9cdd6f1a896e17.1453405861.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-24x86/asm/xen: Set ELF function type for xen_adjust_exception_frame()Josh Poimboeuf1-0/+1
xen_adjust_exception_frame() is a callable function, but is missing the ELF function type, which confuses tools like stacktool. Properly annotate it to be a callable function. The generated code is unchanged. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/b1851bd17a0986472692a7e3a05290d891382cdd.1453405861.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-17perf/x86: Move perf_event.h to its new homeBorislav Petkov1-1/+1
Now that all functionality has been moved to arch/x86/events/, move the perf_event.h header and adjust include paths. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: http://lkml.kernel.org/r/1455098123-11740-18-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-01x86/cpufeature: Use enum cpuid_leafs instead of magic numbersHuaitong Han1-1/+1
Most of the magic numbers in x86_capability[] have been converted to 'enum cpuid_leafs', and this patch updates the remaining part. Signed-off-by: Huaitong Han <huaitong.han@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Alexander Kuleshov <kuleshovmail@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hector Marco-Gisbert <hecmargi@upv.es> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: lguest@lists.ozlabs.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1453750913-4781-3-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-12Merge tag 'for-linus-4.5-rc0-tag' of ↵Linus Torvalds4-90/+38
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: "Xen features and fixes for 4.5-rc0: - Stolen ticks and PV wallclock support for arm/arm64 - Add grant copy ioctl to gntdev device" * tag 'for-linus-4.5-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: add ioctl for grant copy x86/xen: don't reset vcpu_info on a cancelled suspend xen/gntdev: constify mmu_notifier_ops structures xen/grant-table: constify gnttab_ops structure xen/time: use READ_ONCE xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notify xen/x86: support XENPF_settime64 xen/arm: set the system time in Xen via the XENPF_settime64 hypercall xen/arm: introduce xen_read_wallclock arm: extend pvclock_wall_clock with sec_hi xen: introduce XENPF_settime64 xen/arm: introduce HYPERVISOR_platform_op on arm and arm64 xen: rename dom0_op to platform_op xen/arm: account for stolen ticks arm64: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops arm: introduce CONFIG_PARAVIRT, PARAVIRT_TIME_ACCOUNTING and pv_time_ops missing include asm/paravirt.h in cputime.c xen: move xen_setup_runstate_info and get_runstate_snapshot to drivers/xen/time.c
2016-01-11Merge branch 'x86-cleanups-for-linus' of ↵Linus Torvalds2-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Ingo Molnar: "The main changes in this cycle were: - code patching and cpu_has cleanups (Borislav Petkov) - paravirt cleanups (Juergen Gross) - TSC cleanup (Thomas Gleixner) - ptrace cleanup (Chen Gang)" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arch/x86/kernel/ptrace.c: Remove unused arg_offs_table x86/mm: Align macro defines x86/cpu: Provide a config option to disable static_cpu_has x86/cpufeature: Remove unused and seldomly used cpu_has_xx macros x86/cpufeature: Cleanup get_cpu_cap() x86/cpufeature: Move some of the scattered feature bits to x86_capability x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_defer x86/paravirt: Remove unused pv_apic_ops structure x86/tsc: Remove unused tsc_pre_init() hook x86: Remove unused function cpu_has_ht_siblings() x86/paravirt: Kill some unused patching functions
2016-01-11Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds4-39/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - vDSO and asm entry improvements (Andy Lutomirski) - Xen paravirt entry enhancements (Boris Ostrovsky) - asm entry labels enhancement (Borislav Petkov) - and other misc changes (Thomas Gleixner, me)" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vsdo: Fix build on PARAVIRT_CLOCK=y, KVM_GUEST=n Revert "x86/kvm: On KVM re-enable (e.g. after suspend), update clocks" x86/entry/64_compat: Make labels local x86/platform/uv: Include clocksource.h for clocksource_touch_watchdog() x86/vdso: Enable vdso pvclock access on all vdso variants x86/vdso: Remove pvclock fixmap machinery x86/vdso: Get pvclock data from the vvar VMA instead of the fixmap x86, vdso, pvclock: Simplify and speed up the vdso pvclock reader x86/kvm: On KVM re-enable (e.g. after suspend), update clocks x86/entry/64: Bypass enter_from_user_mode on non-context-tracking boots x86/asm: Add asm macros for static keys/jump labels x86/asm: Error out if asm/jump_label.h is included inappropriately context_tracking: Switch to new static_branch API x86/entry, x86/paravirt: Remove the unused usergs_sysret32 PV op x86/paravirt: Remove the unused irq_enable_sysexit pv op x86/xen: Avoid fast syscall path for Xen PV guests
2016-01-08Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A handful of x86 fixes: - a syscall ABI fix, fixing an Android breakage - a Xen PV guest fix relating to the RTC device, causing a non-working console - a Xen guest syscall stack frame fix - an MCE hotplug CPU crash fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/numachip: Fix NumaConnect2 MMCFG PCI access x86/entry: Restore traditional SYSENTER calling convention x86/entry: Fix some comments x86/paravirt: Prevent rtc_cmos platform device init on PV guests x86/xen: Avoid fast syscall path for Xen PV guests x86/mce: Ensure offline CPUs don't participate in rendezvous process
2016-01-04x86/xen: don't reset vcpu_info on a cancelled suspendOuyang Zhaowei (Charles)1-1/+2
On a cancelled suspend the vcpu_info location does not change (it's still in the per-cpu area registered by xen_vcpu_setup()). So do not call xen_hvm_init_shared_info() which would make the kernel think its back in the shared info. With the wrong vcpu_info, events cannot be received and the domain will hang after a cancelled suspend. Signed-off-by: Charles Ouyang <ouyangzhaowei@huawei.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-29arch/x86/xen/suspend.c: include xen/xen.hAndrew Morton1-0/+1
Fix the build warning: arch/x86/xen/suspend.c: In function 'xen_arch_pre_suspend': arch/x86/xen/suspend.c:70:9: error: implicit declaration of function 'xen_pv_domain' [-Werror=implicit-function-declaration] if (xen_pv_domain()) ^ Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-12-21xen/x86: convert remaining timespec to timespec64 in xen_pvclock_gtod_notifyStefano Stabellini1-2/+2
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen/x86: support XENPF_settime64Stefano Stabellini1-7/+28
Try XENPF_settime64 first, if it is not available fall back to XENPF_settime32. No need to call __current_kernel_time() when all the info needed are already passed via the struct timekeeper * argument. Return NOTIFY_BAD in case of errors. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen: introduce XENPF_settime64Stefano Stabellini1-4/+4
Rename the current XENPF_settime hypercall and related struct to XENPF_settime32. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen: rename dom0_op to platform_opStefano Stabellini3-6/+6
The dom0_op hypercall has been renamed to platform_op since Xen 3.2, which is ancient, and modern upstream Linux kernels cannot run as dom0 and it anymore anyway. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-12-21xen: move xen_setup_runstate_info and get_runstate_snapshot to ↵Stefano Stabellini1-75/+1
drivers/xen/time.c Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2015-12-19x86/paravirt: Prevent rtc_cmos platform device init on PV guestsDavid Vrabel1-1/+3
Adding the rtc platform device in non-privileged Xen PV guests causes an IRQ conflict because these guests do not have legacy PIC and may allocate irqs in the legacy range. In a single VCPU Xen PV guest we should have: /proc/interrupts: CPU0 0: 4934 xen-percpu-virq timer0 1: 0 xen-percpu-ipi spinlock0 2: 0 xen-percpu-ipi resched0 3: 0 xen-percpu-ipi callfunc0 4: 0 xen-percpu-virq debug0 5: 0 xen-percpu-ipi callfuncsingle0 6: 0 xen-percpu-ipi irqwork0 7: 321 xen-dyn-event xenbus 8: 90 xen-dyn-event hvc_console ... But hvc_console cannot get its interrupt because it is already in use by rtc0 and the console does not work. genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (rtc0) We can avoid this problem by realizing that unprivileged PV guests (both Xen and lguests) are not supposed to have rtc_cmos device and so adding it is not necessary. Privileged guests (i.e. Xen's dom0) do use it but they should not have irq conflicts since they allocate irqs above legacy range (above gsi_top, in fact). Instead of explicitly testing whether the guest is privileged we can extend pv_info structure to include information about guest's RTC support. Reported-and-tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: vkuznets@redhat.com Cc: xen-devel@lists.xenproject.org Cc: konrad.wilk@oracle.com Cc: stable@vger.kernel.org # 4.2+ Link: http://lkml.kernel.org/r/1449842873-2613-1-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-19Merge branch 'linus' into x86/cleanupsThomas Gleixner6-27/+48
Pull in upstream changes so we can apply depending patches.
2015-12-19x86/xen: Avoid fast syscall path for Xen PV guestsBoris Ostrovsky1-1/+3
After 32-bit syscall rewrite, and specifically after commit: 5f310f739b4c ("x86/entry/32: Re-implement SYSENTER using the new C path") ... the stack frame that is passed to xen_sysexit is no longer a "standard" one (i.e. it's not pt_regs). Since we end up calling xen_iret from xen_sysexit we don't need to fix up the stack and instead follow entry_SYSENTER_32's IRET path directly to xen_iret. We can do the same thing for compat mode even though stack does not need to be fixed. This will allow us to drop usergs_sysret32 paravirt op (in the subsequent patch) Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1447970147-1733-2-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-18Merge tag 'for-linus-4.4-rc5-tag' of ↵Linus Torvalds2-17/+12
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen bug fixes from David Vrabel: - XSA-155 security fixes to backend drivers. - XSA-157 security fixes to pciback. * tag 'for-linus-4.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: fix up cleanup path when alloc fails xen/pciback: Don't allow MSI-X ops if PCI_COMMAND_MEMORY is not set. xen/pciback: For XEN_PCI_OP_disable_msi[|x] only disable if device has MSI(X) enabled. xen/pciback: Do not install an IRQ handler for MSI interrupts. xen/pciback: Return error on XEN_PCI_OP_enable_msix when device has MSI or MSI-X enabled xen/pciback: Return error on XEN_PCI_OP_enable_msi when device has MSI or MSI-X enabled xen/pciback: Save xen_pci_op commands before processing it xen-scsiback: safely copy requests xen-blkback: read from indirect descriptors only once xen-blkback: only read request operation from shared ring once xen-netback: use RING_COPY_REQUEST() throughout xen-netback: don't use last request to determine minimum Tx credit xen: Add RING_COPY_REQUEST() xen/x86/pvh: Use HVM's flush_tlb_others op xen: Resume PMU from non-atomic context xen/events/fifo: Consume unprocessed events when a CPU dies
2015-12-14xen/x86/pvh: Use HVM's flush_tlb_others opBoris Ostrovsky1-7/+2
Using MMUEXT_TLB_FLUSH_MULTI doesn't buy us much since the hypervisor will likely perform same IPIs as would have the guest. More importantly, using MMUEXT_INVLPG_MULTI may not to invalidate the guest's address on remote CPU (when, for example, VCPU from another guest is running there). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-12-02xen: Resume PMU from non-atomic contextBoris Ostrovsky1-10/+10
Resuming PMU currently triggers a warning from ___might_sleep() (assuming CONFIG_DEBUG_ATOMIC_SLEEP is set) when xen_pmu_init() allocates GFP_KERNEL page because we are in state resembling atomic context. Move resuming PMU to xen_arch_resume() which is called in regular context. For symmetry move suspending PMU to xen_arch_suspend() as well. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <stable@vger.kernel.org> # 4.3 Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-11-25x86/paravirt: Remove paravirt ops pmd_update[_defer] and pte_update_deferJuergen Gross1-1/+0
pte_update_defer can be removed as it is always set to the same function as pte_update. So any usage of pte_update_defer() can be replaced by pte_update(). pmd_update and pmd_update_defer are always set to paravirt_nop, so they can just be nuked. Signed-off-by: Juergen Gross <jgross@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: jeremy@goop.org Cc: chrisw@sous-sol.org Cc: akataria@vmware.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xen.org Cc: konrad.wilk@oracle.com Cc: david.vrabel@citrix.com Cc: boris.ostrovsky@oracle.com Link: http://lkml.kernel.org/r/1447771879-1806-1-git-send-email-jgross@suse.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-23x86/entry, x86/paravirt: Remove the unused usergs_sysret32 PV opBoris Ostrovsky1-19/+0
As result of commit "x86/xen: Avoid fast syscall path for Xen PV guests", usergs_sysret32 pv op is not called by Xen PV guests anymore and since they were the only ones who used it we can safely remove it. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1447970147-1733-4-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-23x86/paravirt: Remove the unused irq_enable_sysexit pv opBoris Ostrovsky3-20/+0
As result of commit "x86/xen: Avoid fast syscall path for Xen PV guests", the irq_enable_sysexit pv op is not called by Xen PV guests anymore and since they were the only ones who used it we can safely remove it. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1447970147-1733-3-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-23x86/xen: Avoid fast syscall path for Xen PV guestsBoris Ostrovsky1-1/+3
After 32-bit syscall rewrite, and specifically after commit: 5f310f739b4c ("x86/entry/32: Re-implement SYSENTER using the new C path") ... the stack frame that is passed to xen_sysexit is no longer a "standard" one (i.e. it's not pt_regs). Since we end up calling xen_iret from xen_sysexit we don't need to fix up the stack and instead follow entry_SYSENTER_32's IRET path directly to xen_iret. We can do the same thing for compat mode even though stack does not need to be fixed. This will allow us to drop usergs_sysret32 paravirt op (in the subsequent patch) Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: david.vrabel@citrix.com Cc: konrad.wilk@oracle.com Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1447970147-1733-2-git-send-email-boris.ostrovsky@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-19x86/paravirt: Remove unused pv_apic_ops structureJuergen Gross1-7/+0
The only member of that structure is startup_ipi_hook which is always set to paravirt_nop. Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: jeremy@goop.org Cc: chrisw@sous-sol.org Cc: akataria@vmware.com Cc: rusty@rustcorp.com.au Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xen.org Cc: konrad.wilk@oracle.com Cc: boris.ostrovsky@oracle.com Link: http://lkml.kernel.org/r/1447767872-16730-1-git-send-email-jgross@suse.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-04Merge tag 'for-linus-4.4-rc0-tag' of ↵Linus Torvalds5-10/+36
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from David Vrabel: - Improve balloon driver memory hotplug placement. - Use unpopulated hotplugged memory for foreign pages (if supported/enabled). - Support 64 KiB guest pages on arm64. - CPU hotplug support on arm/arm64. * tag 'for-linus-4.4-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (44 commits) xen: fix the check of e_pfn in xen_find_pfn_range x86/xen: add reschedule point when mapping foreign GFNs xen/arm: don't try to re-register vcpu_info on cpu_hotplug. xen, cpu_hotplug: call device_offline instead of cpu_down xen/arm: Enable cpu_hotplug.c xenbus: Support multiple grants ring with 64KB xen/grant-table: Add an helper to iterate over a specific number of grants xen/xenbus: Rename *RING_PAGE* to *RING_GRANT* xen/arm: correct comment in enlighten.c xen/gntdev: use types from linux/types.h in userspace headers xen/gntalloc: use types from linux/types.h in userspace headers xen/balloon: Use the correct sizeof when declaring frame_list xen/swiotlb: Add support for 64KB page granularity xen/swiotlb: Pass addresses rather than frame numbers to xen_arch_need_swiotlb arm/xen: Add support for 64KB page granularity xen/privcmd: Add support for Linux 64KB page granularity net/xen-netback: Make it running on 64KB page granularity net/xen-netfront: Make it running on 64KB page granularity block/xen-blkback: Make it running on 64KB page granularity block/xen-blkfront: Make it running on 64KB page granularity ...
2015-11-02xen: fix the check of e_pfn in xen_find_pfn_rangeZhenzhong Duan1-1/+1
On some NUMA system, after dom0 up, we see below warning even if there are enough pfn ranges that could be used for remapping: "Unable to find available pfn range, not remapping identity pages" Fix it to avoid getting a memory region of zero size in xen_find_pfn_range. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-10-28x86/xen: add reschedule point when mapping foreign GFNsDavid Vrabel1-0/+1
Mapping a large range of foreign GFNs can take a long time, add a reschedule point after each batch of 16 GFNs. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-10-23xen/arm: Enable cpu_hotplug.cStefano Stabellini1-0/+15
Build cpu_hotplug for ARM and ARM64 guests. Rename arch_(un)register_cpu to xen_(un)register_cpu and provide an empty implementation on ARM and ARM64. On x86 just call arch_(un)register_cpu as we are already doing. Initialize cpu_hotplug on ARM. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Julien Grall <julien.grall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2015-10-23x86/xen: export xen_alloc_p2m_entry()David Vrabel1-6/+13
Rename alloc_p2m() to xen_alloc_p2m_entry() and export it. This is useful for ensuring that a p2m entry is allocated (i.e., not a shared missing or identity entry) so that subsequent set_phys_to_machine() calls will require no further allocations. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> --- v3: - Make xen_alloc_p2m_entry() a nop on auto-xlate guests.
2015-10-23xen/balloon: make alloc_xenballoon_pages() always allocate low pagesDavid Vrabel1-1/+1
All users of alloc_xenballoon_pages() wanted low memory pages, so remove the option for high memory. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-23x86/xen: discard RAM regions above the maximum reservationDavid Vrabel1-2/+5
During setup, discard RAM regions that are above the maximum reservation (instead of marking them as E820_UNUSABLE). This allows hotplug memory to be placed at these addresses. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
2015-10-07x86/vdso: Remove runtime 32-bit vDSO selectionAndy Lutomirski1-11/+2
32-bit userspace will now always see the same vDSO, which is exactly what used to be the int80 vDSO. Subsequent patches will clean it up and make it support SYSENTER and SYSCALL using alternatives. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/e7e6b3526fa442502e6125fe69486aab50813c32.1444091584.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-06x86/xen/p2m: hint at the last populated P2M entryDavid Vrabel1-1/+18
With commit 633d6f17cd91ad5bf2370265946f716e42d388c6 (x86/xen: prepare p2m list for memory hotplug) the P2M may be sized to accomdate a much larger amount of memory than the domain currently has. When saving a domain, the toolstack must scan all the P2M looking for populated pages. This results in a performance regression due to the unnecessary scanning. Instead of reporting (via shared_info) the maximum possible size of the P2M, hint at the last PFN which might be populated. This hint is increased as new leaves are added to the P2M (in the expectation that they will be used for populated entries). Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: <stable@vger.kernel.org> # 4.0+
2015-09-28x86/xen: Do not clip xen_e820_map to xen_e820_map_entries when sanitizing mapMalcolm Crossley1-1/+1
Sanitizing the e820 map may produce extra E820 entries which would result in the topmost E820 entries being removed. The removed entries would typically include the top E820 usable RAM region and thus result in the domain having signicantly less RAM available to it. Fix by allowing sanitize_e820_map to use the full size of the allocated E820 array. Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 05:14:15 +0000