summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/sun4i-a10-hackberry.dts
AgeCommit message (Collapse)AuthorFilesLines
2015-01-21ARM: sunxi: DT: Convert the DTs to use a header for the pinctrl nodesMaxime Ripard1-4/+5
The pinctrl nodes require some extra opaque arguments for the pull up and drive strength values. Introduce a new header file and convert the device trees to replace these opaque numbers by defines. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: convert DTs to use common GPIOs includesMaxime Ripard1-3/+5
Replace the various raw GPIO flags by their definition in the common dt-bindings header. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-01-21ARM: sunxi: DT: Convert to device tree includesMaxime Ripard1-2/+2
Prepare the device trees to use the C preprocessor. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-10-21ARM: sun4i: hackberry: Relicense the device tree under GPLv2/X11Maxime Ripard1-5/+41
The current GPL only licensing on the DTSI makes it very impractical for other software components licensed under another license. In order to make it easier for them to reuse our device trees, relicense our device trees under a GPL/X11 dual-license. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Carlo Caione <carlo@caione.org> Acked-by: Hans de Goede <hdegoede@redhat.com>
2014-07-01ARM: dts: sun4i: Add ir node to various boardsHans de Goede1-0/+6
Tested on a cubieboard and the mini-x. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-01ARM: dts: sun4i: Add AXP209 support to various boardsCarlo Caione1-0/+15
At a node for the axp209, and where necessary the i2c controller to the dts for various boards. Note the axp209 regulators are omitted as we don't have any use for them yet, and on some boards were not sure how exactly they are wired up. Adding support for just the axp209 without the regulators is still useful, as it will give us power-button and poweroff support. Signed-off-by: Carlo Caione <carlo@caione.org> [hdegoede@redhat.com: Drop the regulator bits for now] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-11ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodesHans de Goede1-0/+1
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-05-04ARM: dts: sun4i: Enable mmc controller on various A10 boardsHans de Goede1-0/+9
Tested on a subset of these boards, for the others boards the settings match the ones of the tested boards according to the original firmware fex files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to hackberry dtsHans de Goede1-0/+40
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Based on fex file settings, the fex file also contains a mysterious line: usb_hub_vcc_en_gpio = port:PB09<1><0><default><0> Which also clashes with usbc0, which has: usb_drv_vbus_gpio = port:PB09<1><0><default><0> So if usb does not work properly we need someone with a hackberry to look closer into this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-22ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulatorsHans de Goede1-11/+7
According to Documentation/devicetree/bindings/regulator/regulator.txt regulator nodes should not be placed under 'simple-bus'. Mark Rutland also explains about it at: http://www.spinics.net/lists/linux-usb/msg101497.html Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-12-29ARM: sun4i: dt: Remove chosen nodesMaxime Ripard1-4/+0
The chosen nodes are nowadays pretty useless, since they will be overriden by the bootloader anyway. We can thus safely remove them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-08-10ARM: sun4i: dt: Fix A10 SoC bus base addressMaxime Ripard1-1/+1
There was a typo in the base address used for the soc node in the A10 device tree. Fix it with the proper base address. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-05-31ARM: sunxi: Add EMAC Controller to Hackberry dtMaxime Ripard1-0/+41
The Hackberry has a PHY that needs to be powered up through a GPIO, so we need to use a fixed regulator here. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08ARM: sunxi: dt: Reorganize the dtsiMaxime Ripard1-1/+1
In the early days, the A10 and A13 shared quite some code. Nowadays it shares less and less code, the A31 diverging even more, so it doesn't make much sense to continue to maintain this structure, just use one DTSI for every SoC, and that's it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-03-29ARM: sunxi: hackberry: Add UART muxingMaxime Ripard1-0/+2
We previously relied on the bootloader to do the muxing of the UART for the Hackberry. Don't rely on it anymore and use pinctrl. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Emilio López <emilio@elopez.com.ar>
2013-03-29ARM: sunxi: Rename uart nodes to serialMaxime Ripard1-1/+1
The other architecture use serial@address for their uart nodes, so rename our uart dt nodes to be consistent Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-01-08ARM: sunxi: Add device tree for Miniand HackberryMaxime Ripard1-0/+30
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 04:54:29 +0000