summaryrefslogtreecommitdiff
path: root/Documentation
AgeCommit message (Collapse)AuthorFilesLines
2015-05-24misc: mic: add support for loading/unloading SCIF driverSudeep Dutt1-13/+11
modprobe SCIF driver upon start and remove it upon unload Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24misc: mic: SCIF header file and IOCTL interfaceSudeep Dutt2-12/+114
This patch introduces the SCIF documentation in the header file and describes the IOCTL interface for user mode. mic_overview.txt is updated with documentation on SCIF and a new document describing SCIF in more details is available in scif_overview.txt. Reviewed-by: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1: Add support for DS28EA00 sequence to w1-thermMatt Campbell2-1/+16
This patch provides support for the DS28EA00 digital thermometer. The DS28EA00 provides an additional two pins for implementing a sequence detection algorithm. This feature allows you to determine the physical location of the chip in the 1-wire bus without needing pre-existing knowledge of the bus ordering. Support is provided through the sysfs w1_seq file. The file will contain a single line with an integer value representing the device index in the bus starting at 0. Signed-off-by: Matt Campbell <mattrcampbell@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24w1: introduce an ability to specify microseconds bus scanning intervalsDmitry Khromov2-11/+30
Some of 1-Wire devices commonly associated with physical access control systems are attached/generate presence for as short as 100 ms - hence the tens-to-hundreds milliseconds scan intervals are required. Signed-off-by: Dmitry Khromov <dk@icelogic.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: add name and uuid into device attributesTomas Winkler1-0/+14
Export name and uuid via sysfs and uevent Cc: linux-api@vger.kernel.org Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: report also uuid in module aliasTomas Winkler1-1/+1
In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: replicator: Add Qualcomm CoreSight Replicator driverPratik Patel1-0/+1
This driver manages Qualcomm CoreSight Replicator device, which resides on the AMBA bus. Replicator has been made programmable to allow software to turn of the replicator branch to sink that is not being used. This avoids trace traffic to the unused/non-current sink from causing back pressure that results in overflows at the source. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight: document the bindings for the ATCLKLinus Walleij1-5/+8
Put in a blurb in the device tree bindings indicating that coresight blocks may have an optional ATCLK. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Read only access to the tracer's ID registersMathieu Poirier1-0/+90
ETM ID registers contain valuable information about the capabilities of the implementation and are very useful when configuring the device for various trace scenarios. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Read only access to the main management registersMathieu Poirier1-0/+77
Having access to the ETMv4 management registers is very useful as they give meaningful information on how the IP block has been configured at synthesis time. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the VM ID functionsPratik Patel1-0/+20
Adding sysfs entries to access and configure specifics about the virtual machine ID comparator functions. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the context ID functionsPratik Patel1-0/+19
Adding sysfs entries to access and configure specifics about the context ID comparator functions. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the selection of resourcesPratik Patel1-0/+12
Adding sysfs entries to control the selection of the resources the trace unit will use as triggers to perform a trace run. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the counter functionsPratik Patel1-0/+26
Adding sysfs entries related to the counter functionality, more specifically to set, control and reload the counters. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the sequencer functionsPratik Patel1-0/+25
Adding sysfs entries to access the sequencers related registers, more specifically the sequencer state, the sequencer state transition and the sequencer reset control registers. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the address comparator functionsPratik Patel1-0/+25
Adding sysfs entries to control the various mode the address comparator registers can enact, i.e, start/top, single, and range. Also supplementing with address comparator types configuration registers access, mandatory to complete the configuration of the comparator functions. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the ViewInst registerPratik Patel1-0/+20
Adding sysfs entries to control the ViewInst register's event selector along with secure and non-secure exception level instruction tracing. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to various configuration optionsPratik Patel1-0/+26
Adding sysfs entries to configure: . global timestamp. . how often trace synchronisation occur. . the threashold value for cycle counting. . branch and broadcasting regions. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to the reset, mode, pe and eventsPratik Patel1-0/+33
Adding sysfs entries to: . set the tracing entity with default values. . set various mode associated to the tracing entity. . select the processing entity the tracing entity relates to. . select various events of interest. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Controls pertaining to tracer configurationPratik Patel1-0/+62
Tracers can be configured with various options at synthesis time and knowing what resources are available is important for SW configuration purposes. As such adding RO sysfs entries for characteristics related to the tracer implementation. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24coresight-etm4x: Adding CoreSight ETM4x driverPratik Patel1-0/+15
This driver manages the CoreSight ETMv4 (Embedded Trace Macrocell) IP block to support HW assisted tracing on ARMv7 and ARMv8 architectures. Signed-off-by: Pratik Patel <pratikp@codeaurora.org> Signed-off-by: Kaixu Xia <xiakaixu@huawei.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-18Merge tag 'for-linus-20150516' of git://git.infradead.org/linux-mtdLinus Torvalds1-3/+3
Pull MTD fixes from Brian Norris: "Two MTD fixes for 4.1: - readtest: the signal-handling code was clobbering the error codes we should be handling/reporting in this test, rendering it useless. Noticed by Coverity. - the common SPI NOR flash DT binding (merged for 4.1-rc1) is being revised, so let's change that before 4.1 is minted" * tag 'for-linus-20150516' of git://git.infradead.org/linux-mtd: Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor" mtd: readtest: don't clobber error reports
2015-05-16Merge tag 'tty-4.1-rc4' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here's some TTY and serial driver fixes for reported issues. All of these have been in linux-next successfully" * tag 'tty-4.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pty: Fix input race when closing tty/n_gsm.c: fix a memory leak when gsmtty is removed Revert "serial/amba-pl011: Leave the TX IRQ alone when the UART is not open" serial: omap: Fix error handling in probe earlycon: Revert log warnings
2015-05-15Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"Brian Norris1-3/+3
In commit 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding"), we added a generic "nor-jedec" binding to catch all mostly-compatible SPI NOR flash which can be detected via the READ ID opcode (0x9F). This was discussed and reviewed at the time, however objections have come up since then as part of this discussion: http://lkml.kernel.org/g/20150511224646.GJ32500@ld-irv-0074 It seems the parties involved agree that "jedec,spi-nor" does a better job of capturing the fact that this is SPI-specific, not just any NOR flash. This binding was only merged for v4.1-rc1, so it's still OK to change the naming. At the same time, let's move the documentation to a better name. Next up: stop referring to code (drivers/mtd/devices/m25p80.c) from the documentation. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Mark Rutland <mark.rutland@arm.com>
2015-05-10pty: Fix input race when closingPeter Hurley1-0/+3
A read() from a pty master may mistakenly indicate EOF (errno == -EIO) after the pty slave has closed, even though input data remains to be read. For example, pty slave | input worker | pty master | | | | n_tty_read() pty_write() | | input avail? no add data | | sleep schedule worker --->| | . |---> flush_to_ldisc() | . pty_close() | fill read buffer | . wait for worker | wakeup reader --->| . | read buffer full? |---> input avail ? yes |<--- yes - exit worker | copy 4096 bytes to user TTY_OTHER_CLOSED <---| |<--- kick worker | | **** New read() before worker starts **** | | n_tty_read() | | input avail? no | | TTY_OTHER_CLOSED? yes | | return -EIO Several conditions are required to trigger this race: 1. the ldisc read buffer must become full so the input worker exits 2. the read() count parameter must be >= 4096 so the ldisc read buffer is empty 3. the subsequent read() occurs before the kicked worker has processed more input However, the underlying cause of the race is that data is pipelined, while tty state is not; ie., data already written by the pty slave end is not yet visible to the pty master end, but state changes by the pty slave end are visible to the pty master end immediately. Pipeline the TTY_OTHER_CLOSED state through input worker to the reader. 1. Introduce TTY_OTHER_DONE which is set by the input worker when TTY_OTHER_CLOSED is set and either the input buffers are flushed or input processing has completed. Readers/polls are woken when TTY_OTHER_DONE is set. 2. Reader/poll checks TTY_OTHER_DONE instead of TTY_OTHER_CLOSED. 3. A new input worker is started from pty_close() after setting TTY_OTHER_CLOSED, which ensures the TTY_OTHER_DONE state will be set if the last input worker is already finished (or just about to exit). Remove tty_flush_to_ldisc(); no in-tree callers. Fixes: 52bce7f8d4fc ("pty, n_tty: Simplify input processing on final close") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96311 BugLink: http://bugs.launchpad.net/bugs/1429756 Cc: <stable@vger.kernel.org> # 3.19+ Reported-by: Andy Whitcroft <apw@canonical.com> Reported-by: H.J. Lu <hjl.tools@gmail.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-09Merge tag 'fixes-for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A few patches have come up since the merge window. The largest one is a rewrite of the PXA lubbock/mainstone IRQ handling. This was already broken in 2011 by a change to the GPIO code and only noticed now. The other changes contained here are: MAINTAINERS file updates: - Ray Jui and Scott Branden are now co-maintainers for some of the mach-bcm chips, while Christian Daudt and Marc Carino have stepped down. - Andrew Victor is no longer maintaining at91. Instead, Alexandre Belloni now becomes an official maintainer, after having done a bulk of the work for a while. - Baruch Siach, who added the mach-digicolor platform in 4.1 is now listed as maintainer - The git URL for mach-socfpga has changed Bug fixes: - Three bug fixes for new rockchip rk3288 code - A regression fix to make SD card support work on certain ux500 boards - multiple smaller dts fixes for imx, omap, mvebu, and shmobile - a regression fiix for omap3 power consumption - a fix for regression in the ARM CCI bus driver Configuration changes: - more imx platforms are now enabled in multi_v7_defconfig" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) MAINTAINERS: add Conexant Digicolor machines entry MAINTAINERS: socfpga: update the git repo for SoCFPGA ARM: multi_v7_defconfig: Select more FSL SoCs MAINTAINERS: replace an AT91 maintainer drivers: CCI: fix used_mask init in validate_group() bus: omap_l3_noc: Fix master id address decoding for OMAP5 bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance ARM: dts: dra7: Fix efuse register size for ABB ARM: dts: am57xx-beagle-x15: Switch GPIO fan number ARM: dts: am57xx-beagle-x15: Switch UART mux pins ARM: dts: am437x-sk: reduce col-scan-delay-us ARM: dts: am437x-sk: fix for new newhaven display module revision ARM: dts: am57xx-beagle-x15: Fix RTC aliases ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x ARM: dts: omap3: Add #iommu-cells to isp and iva iommu ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO ARM: dts: OMAP3-N900: Add microphone bias voltages ARM: OMAP2+: Fix omap off idle power consumption creeping up MAINTAINERS: Update brcmstb entry MAINTAINERS: Remove Christian Daudt for mach-bcm ...
2015-05-07Merge tag 'pm+acpi-4.1-rc3' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These include three regression fixes (PCI resources management, ACPI/PNP device enumeration, ACPI SBS on MacBook) and two ACPI documentation fixes related to GPIO. Specifics: - Fix for a PCI resources management regression introduced during the 4.0 cycle and related to the handling of ACPI resources' Producer/Consumer flags that turn out to be useless (Jiang Liu) - Fix for a MacBook regression related to the Smart Battery Subsystem (SBS) driver causing various problems (stalls on boot, failure to detect or report battery) to happen and introduced during the 3.18 cycle (Chris Bainbridge) - Fix for an ACPI/PNP device enumeration regression introduced during the 3.16 cycle caused by failing to include two PNP device IDs into the list of IDs that PNP device objects need to be created for (Witold Szczeponik) - Fixes for two minor mistakes in the ACPI GPIO properties documentation (Antonio Ospite, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PNP: add two IDs to list for PNPACPI device enumeration ACPI / documentation: Fix ambiguity in the GPIO properties document ACPI / documentation: fix a sentence about GPIO resources ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus
2015-05-07Merge branches 'acpi-resources', 'acpi-battery', 'acpi-doc' and 'acpi-pnp'Rafael J. Wysocki7-24/+35
* acpi-resources: x86/PCI/ACPI: Make all resources except [io 0xcf8-0xcff] available on PCI bus * acpi-battery: ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook * acpi-doc: ACPI / documentation: Fix ambiguity in the GPIO properties document ACPI / documentation: fix a sentence about GPIO resources * acpi-pnp: ACPI / PNP: add two IDs to list for PNPACPI device enumeration
2015-05-07Merge tag 'omap-for-v4.1/fixes-rc1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v4.1-rc1" from Tony Lindgren: Fixes for omaps, mostly a fix for power power consumption creeping up during idle, and two l3-noc device fixes: - Fix power consumption creeping up with I2C4 staying on - Fix n900 microphone bias voltages - Fix dra7 l3-noc for host clock - Fix omap5 l3-noc id address decoding The rest are all just minor dts fixes: - Fix changed EXTCON_USB_GPIO_USB in defconfig - Fix missing isp and iva #iommu-cells property - Various beagle x15 dts fixes for pre-production changes - Fix am437x-sk display dts entries * tag 'omap-for-v4.1/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: omap_l3_noc: Fix master id address decoding for OMAP5 bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance ARM: dts: dra7: Fix efuse register size for ABB ARM: dts: am57xx-beagle-x15: Switch GPIO fan number ARM: dts: am57xx-beagle-x15: Switch UART mux pins ARM: dts: am437x-sk: reduce col-scan-delay-us ARM: dts: am437x-sk: fix for new newhaven display module revision ARM: dts: am57xx-beagle-x15: Fix RTC aliases ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x ARM: dts: omap3: Add #iommu-cells to isp and iva iommu ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO ARM: dts: OMAP3-N900: Add microphone bias voltages ARM: OMAP2+: Fix omap off idle power consumption creeping up
2015-05-07Merge tag 'imx-fixes-4.1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "The i.MX fixes for 4.1" from Shawn Guo: - A couple of imx23-olinuxino device tree fixes regarding to LED GPIO polarity and USB dr_mode setting - One i.MX28 device tree fix on AUART4 TX-DMA interrupt name - Add missing pwm-cells to PWM4 for i.MX25 device tree - Fix imx6q-phytec device tree to get correct USB VBUS control - Drop invalid pinctrl-assert-gpios property from imx6qdl-sabreauto device tree, which was sneaked in from vendor device tree - One fix on Wolfram's broken email address * tag 'imx-fixes-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-sabreauto: remove pinctrl-assert-gpios ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name ARM: dts: imx25: Add #pwm-cells to pwm4 ARM: dts: imx6: phyFLEX: USB VBUS control is active-high ARM: mach-imx: devices: platform-sdhci-esdhc-imx: fix broken email address ARM: dts: imx23-olinuxino: Fix dr_mode of usb0 ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO
2015-05-05Merge tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmiLinus Torvalds1-1/+4
Pull IPMI fixes from Corey Minyard: "Lots of minor IPMI fixes, especially ones that have have come up since the SSIF driver has been in the main kernel for a while" * tag 'for-linus-4.1-1' of git://git.code.sf.net/p/openipmi/linux-ipmi: ipmi: Fix multi-part message handling ipmi: Add alert handling to SSIF ipmi: Fix a problem that messages are not issued in run_to_completion mode ipmi: Report an error if ACPI _IFT doesn't exist ipmi: Remove unused including <linux/version.h> ipmi: Don't report err in the SI driver for SSIF devices ipmi: Remove incorrect use of seq_has_overflowed ipmi:ssif: Ignore spaces when comparing I2C adapter names ipmi_ssif: Fix the logic on user-supplied addresses
2015-05-05Documentation: bindings: add abracon,abx80xAlexandre Belloni1-0/+30
Document the bindings for abracon,abx80x and related compatibles. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Philippe De Muyter <phdm@macqel.be> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-05kasan: show gcc version requirements in Kconfig and DocumentationJoe Perches1-3/+5
The documentation shows a need for gcc > 4.9.2, but it's really >=. The Kconfig entries don't show require versions so add them. Correct a latter/later typo too. Also mention that gcc 5 required to catch out of bounds accesses to global and stack variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-05-05ipmi:ssif: Ignore spaces when comparing I2C adapter namesCorey Minyard1-1/+4
Some of the adapters have spaces in their names, but that's really hard to pass in as a module or kernel parameters. So ignore the spaces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2015-05-04bus: omap_l3_noc: Fix master id address decoding for OMAP5Suman Anna1-0/+1
The L3 Error handling on OMAP5 for the most part is very similar to that of OMAP4, and had leveraged common data structures and register layout definitions so far. Upon closer inspection, there are a few minor differences causing an incorrect decoding and reporting of the master NIU upon an error: 1. The L3_TARG_STDERRLOG_MSTADDR.STDERRLOG_MSTADDR occupies 11 bits on OMAP5 as against 8 bits on OMAP4, with the master NIU connID encoded in the 6 MSBs of the STDERRLOG_MSTADDR field. 2. The CLK3 FlagMux component has 1 input source on OMAP4 and 3 input sources on OMAP5. The common DEBUGSS source is at a different input on each SoC. Fix the above issues by using a OMAP5-specific compatible property and using SoC-specific data where there are differences. Signed-off-by: Suman Anna <s-anna@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-04ACPI / documentation: Fix ambiguity in the GPIO properties documentRafael J. Wysocki1-3/+3
The first paragraph in Documentation/acpi/gpio-properties.txt is ambiguous, so make it more clear. Reported-by: Antonio Ospite <ao2@ao2.it> Acked-by: Antonio Ospite <ao2@ao2.it> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-03Merge tag 'powerpc-4.1-3' of ↵Linus Torvalds1-16/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc fixes from Michael Ellerman: - build fix for SMP=n in book3s_xics.c - fix for Daniel's pci_controller_ops on powernv. - revert the TM syscall abort patch for now. - CPU affinity fix from Nathan. - two EEH fixes from Gavin. - fix for CR corruption from Sam. - selftest build fix. * tag 'powerpc-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/powernv: Restore non-volatile CRs after nap powerpc/eeh: Delay probing EEH device during hotplug powerpc/eeh: Fix race condition in pcibios_set_pcie_reset_state() powerpc/pseries: Correct cpu affinity for dlpar added cpus selftests/powerpc: Fix the pmu install rule Revert "powerpc/tm: Abort syscalls in active transactions" powerpc/powernv: Fix early pci_controller_ops loading. powerpc/kvm: Fix SMP=n build error in book3s_xics.c
2015-04-30ACPI / documentation: fix a sentence about GPIO resourcesAntonio Ospite1-1/+1
The sentence "These resources are used be used to pass ..." contains a suspicious repetition, likely the author meant "These resources can be used to pass ...". Simplify the wording. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30modsign: change default key detailsDavid Howells1-3/+3
Change default key details to be more obviously unspecified. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-04-30Merge tag 'usb-4.1-rc2' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB fixes for 4.2-rc2. They revert one problem patch, fix some minor things, and add some new quirks for "broken" devices. All have been in linux-next successfully" * tag 'usb-4.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: cdc-acm: prevent infinite loop when parsing CDC headers. Revert "usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap" usb: chipidea: otg: remove mutex unlock and lock while stop and start role uas: Set max_sectors_240 quirk for ASM1053 devices uas: Add US_FL_MAX_SECTORS_240 flag uas: Allow uas_use_uas_driver to return usb-storage flags
2015-04-30Revert "powerpc/tm: Abort syscalls in active transactions"Michael Ellerman1-16/+16
This reverts commit feba40362b11341bee6d8ed58d54b896abbd9f84. Although the principle of this change is good, the implementation has a few issues. Firstly we can sometimes fail to abort a syscall because r12 may have been clobbered by C code if we went down the virtual CPU accounting path, or if syscall tracing was enabled. Secondly we have decided that it is safer to abort the syscall even earlier in the syscall entry path, so that we avoid the syscall tracing path when we are transactional. So that we have time to thoroughly test those changes we have decided to revert this for this merge window and will merge the fixed version in the next window. NB. Rather than reverting the selftest we just drop tm-syscall from TEST_PROGS so that it's not run by default. Fixes: feba40362b11 ("powerpc/tm: Abort syscalls in active transactions") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-28uas: Add US_FL_MAX_SECTORS_240 flagHans de Goede1-0/+2
The usb-storage driver sets max_sectors = 240 in its scsi-host template, for uas we do not want to do that for all devices, but testing has shown that some devices need it. This commit adds a US_FL_MAX_SECTORS_240 flag for such devices, and implements support for it in uas.c, while at it it also adds support for US_FL_MAX_SECTORS_64 to uas.c. Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-1/+10
Pull networking fixes from David Miller: 1) mlx4 doesn't check fully for supported valid RSS hash function, fix from Amir Vadai 2) Off by one in ibmveth_change_mtu(), from David Gibson 3) Prevent altera chip from reporting false error interrupts in some circumstances, from Chee Nouk Phoon 4) Get rid of that stupid endless loop trying to allocate a FIN packet in TCP, and in the process kill deadlocks. From Eric Dumazet 5) Fix get_rps_cpus() crash due to wrong invalid-cpu value, also from Eric Dumazet 6) Fix two bugs in async rhashtable resizing, from Thomas Graf 7) Fix topology server listener socket namespace bug in TIPC, from Ying Xue 8) Add some missing HAS_DMA kconfig dependencies, from Geert Uytterhoeven 9) bgmac driver intends to force re-polling but does so by returning the wrong value from it's ->poll() handler. Fix from Rafał Miłecki 10) When the creater of an rhashtable configures a max size for it, don't bark in the logs and drop insertions when that is exceeded. Fix from Johannes Berg 11) Recover from out of order packets in ppp mppe properly, from Sylvain Rochet * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (41 commits) bnx2x: really disable TPA if 'disable_tpa' option is set net:treewide: Fix typo in drivers/net net/mlx4_en: Prevent setting invalid RSS hash function mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions netfilter; Add some missing default cases to switch statements in nft_reject. ppp: mppe: discard late packet in stateless mode ppp: mppe: sanity error path rework net/bonding: Make DRV macros private net: rfs: fix crash in get_rps_cpus() altera tse: add support for fixed-links. pxa168: fix double deallocation of managed resources net: fix crash in build_skb() net: eth: altera: Resolve false errors from MSGDMA to TSE ehea: Fix memory hook reference counting crashes net/tg3: Release IRQs on permanent error net: mdio-gpio: support access that may sleep inet: fix possible panic in reqsk_queue_unlink() rhashtable: don't attempt to grow when at max_size bgmac: fix requests for extra polling calls from NAPI tcp: avoid looping in tcp_send_fin() ...
2015-04-27ARM: dts: imx28: Fix AUART4 TX-DMA interrupt nameMarek Vasut1-1/+1
Fix a typo in the TX DMA interrupt name for AUART4. This patch makes AUART4 operational again. Signed-off-by: Marek Vasut <marex@denx.de> Fixes: f30fb03d4d3a ("ARM: dts: add generic DMA device tree binding for mxs-dma") Cc: stable@vger.kernel.org Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-04-26Merge tag 'platform-drivers-x86-v4.1-1' of ↵Linus Torvalds3-13/+167
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "This series includes significant updates to the toshiba_acpi driver and the reintroduction of the dell-laptop keyboard backlight additions I had to revert previously. Also included are various fixes for typos, warnings, correctness, and minor bugs. Specifics: dell-laptop: - add support for keyboard backlight. toshiba_acpi: - adaptive keyboard, hotkey, USB sleep and charge, and backlight updates. Update sysfs documentation. toshiba_bluetooth: - fix enabling/disabling loop on recent devices apple-gmux: - lock iGP IO to protect from vgaarb changes other: - Fix typos, clear gcc warnings, clarify pr_* messages, correct return types, update MAINTAINERS" * tag 'platform-drivers-x86-v4.1-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (25 commits) toshiba_acpi: Do not register vendor backlight when acpi_video bl is available MAINTAINERS: Add me on list of Dell laptop drivers platform: x86: dell-laptop: Add support for keyboard backlight Documentation/ABI: Update sysfs-driver-toshiba_acpi entry toshiba_acpi: Fix pr_* messages from USB Sleep Functions toshiba_acpi: Update and fix USB Sleep and Charge modes wmi: Use bool function return values of true/false not 1/0 toshiba_bluetooth: Fix enabling/disabling loop on recent devices toshiba_bluetooth: Clean up *_add function and disable BT device at removal toshiba_bluetooth: Add three new functions to the driver toshiba_acpi: Fix the enabling of the Special Functions toshiba_acpi: Use the Hotkey Event Type function for keymap choosing toshiba_acpi: Add Hotkey Event Type function and definitions x86/wmi: delete unused wmi_data_lock mutex causing gcc warning apple-gmux: lock iGP IO to protect from vgaarb changes MAINTAINERS: Add missing Toshiba devices and add myself as maintainer toshiba_acpi: Update events in toshiba_acpi_notify intel-oaktrail: Fix trivial typo in comment thinkpad_acpi: off by one in adaptive_keyboard_hotkey_notify_hotkey() thinkpad_acpi: signedness bugs getting current_mode ...
2015-04-26Merge tag 'chrome-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson: "Here's a set of updates to the Chrome OS platform drivers for this merge window. Main new things this cycle is: - Driver changes to expose the lightbar to users. With this, you can make your own blinkenlights on Chromebook Pixels. - Changes in the way that the atmel_mxt trackpads are probed. The laptop driver is trying to be smart and not instantiate the devices that don't answer to probe. For the trackpad that can come up in two modes (bootloader or regular), this gets complicated since the driver already knows how to handle the two modes including the actual addresses used. So now the laptop driver needs to know more too, instantiating the regular address even if the bootloader one is the probe that passed. - mfd driver improvements by Javier Martines Canillas, and a few bugfixes from him, kbuild and myself" * tag 'chrome-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: chromeos_laptop - instantiate Atmel at primary address platform/chrome: cros_ec_lpc - Depend on X86 || COMPILE_TEST platform/chrome: cros_ec_lpc - Include linux/io.h header file platform/chrome: fix platform_no_drv_owner.cocci warnings platform/chrome: cros_ec_lightbar - fix duplicate const warning platform/chrome: cros_ec_dev - fix Unknown escape '%' warning platform/chrome: Expose Chrome OS Lightbar to users platform/chrome: Create sysfs attributes for the ChromeOS EC mfd: cros_ec: Instantiate ChromeOS EC character device platform/chrome: Add Chrome OS EC userspace device interface platform/chrome: Add cros_ec_lpc driver for x86 devices mfd: cros_ec: Add char dev and virtual dev pointers mfd: cros_ec: Use fixed size arrays to transfer data with the EC
2015-04-26Merge tag 'cris-for-4.1' of ↵Linus Torvalds3-0/+40
git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull arch/cris updates from Jesper Nilsson: "Some much needed love for the CRIS-port. There's a bunch of changes this time, giving the CRISv32 port a bit of modern makeover with device-tree, irq domain and gpiolib support, and more switchover to generic frameworks. Some small fixes and removal of the theoretical SMP support brings up the rear" * tag 'cris-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: fix integer overflow in ELF_ET_DYN_BASE CRISv32: use GENERIC_SCHED_CLOCK CRISv32: use MMIO clocksource CRISv32: use generic clockevents CRIS: use generic headers via Kbuild CRIS: use generic cmpxchg.h CRIS: use generic atomic.h CRIS: use generic atomic bitops CRISv10: remove redundant macros from system.h CRIS: remove SMP code CRISv32: don't enable irqs in INIT_THREAD CRISv32: handle multiple signals CRISv32: prevent bogus restarts on sigreturn CRISv32: don't attempt syscall restart on irq exit Add binding documentation for CRIS CRIS: add Axis 88 board device tree CRISv32: add device tree support CRISv32: add irq domains support CRIS: enable GPIOLIB
2015-04-26net: rfs: fix crash in get_rps_cpus()Eric Dumazet1-1/+1
Commit 567e4b79731c ("net: rfs: add hash collision detection") had one mistake : RPS_NO_CPU is no longer the marker for invalid cpu in set_rps_cpu() and get_rps_cpu(), as @next_cpu was the result of an AND with rps_cpu_mask This bug showed up on a host with 72 cpus : next_cpu was 0x7f, and the code was trying to access percpu data of an non existent cpu. In a follow up patch, we might get rid of compares against nr_cpu_ids, if we init the tables with 0. This is silly to test for a very unlikely condition that exists only shortly after table initialization, as we got rid of rps_reset_sock_flow() and similar functions that were writing this RPS_NO_CPU magic value at flow dismantle : When table is old enough, it never contains this value anymore. Fixes: 567e4b79731c ("net: rfs: add hash collision detection") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <tom@herbertland.com> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-0/+17
Pull second batch of KVM changes from Paolo Bonzini: "This mostly includes the PPC changes for 4.1, which this time cover Book3S HV only (debugging aids, minor performance improvements and some cleanups). But there are also bug fixes and small cleanups for ARM, x86 and s390. The task_migration_notifier revert and real fix is still pending review, but I'll send it as soon as possible after -rc1" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits) KVM: arm/arm64: check IRQ number on userland injection KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi KVM: VMX: Preserve host CR4.MCE value while in guest mode. KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8 KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C KVM: PPC: Book3S HV: Streamline guest entry and exit KVM: PPC: Book3S HV: Use bitmap of active threads rather than count KVM: PPC: Book3S HV: Use decrementer to wake napping threads KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu KVM: PPC: Book3S HV: Minor cleanups KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update KVM: PPC: Book3S HV: Accumulate timing information for real-mode code KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT KVM: PPC: Book3S HV: Add ICP real mode counters KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock KVM: PPC: Book3S HV: Add guest->host real mode completion counters KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte ...
2015-04-24Merge branch 'for-next' of ↵Linus Torvalds2-82/+40
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity in target land the last months. The highlights include: - Convert fabric drivers tree-wide to target_register_template() (hch + bart) - iser-target hardening fixes + v1.0 improvements (sagi) - Convert iscsi_thread_set usage to kthread.h + kill iscsi_target_tq.c (sagi + nab) - Add support for T10-PI WRITE_STRIP + READ_INSERT operation (mkp + sagi + nab) - DIF fixes for CONFIG_DEBUG_SG=y + UNMAP file emulation (akinobu + sagi + mkp) - Extended TCMU ABI v2 for future BIDI + DIF support (andy + ilias) - Fix COMPARE_AND_WRITE handling for NO_ALLLOC drivers (hch + nab) Thanks to everyone who contributed this round with new features, bug-reports, fixes, cleanups and improvements. Looking forward, it's currently shaping up to be a busy v4.2 as well" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (69 commits) target: Put TCMU under a new config option target: Version 2 of TCMU ABI target: fix tcm_mod_builder.py target/file: Fix UNMAP with DIF protection support target/file: Fix SG table for prot_buf initialization target/file: Fix BUG() when CONFIG_DEBUG_SG=y and DIF protection enabled target: Make core_tmr_abort_task() skip TMFs target/sbc: Update sbc_dif_generate pr_debug output target/sbc: Make internal DIF emulation honor ->prot_checks target/sbc: Return INVALID_CDB_FIELD if DIF + sess_prot_type disabled target: Ensure sess_prot_type is saved across session restart target/rd: Don't pass incomplete scatterlist entries to sbc_dif_verify_* target: Remove the unused flag SCF_ACK_KREF target: Fix two sparse warnings target: Fix COMPARE_AND_WRITE with SG_TO_MEM_NOALLOC handling target: simplify the target template registration API target: simplify target_xcopy_init_pt_lun target: remove the unused SCF_CMD_XCOPY_PASSTHROUGH flag target/rd: reduce code duplication in rd_execute_rw() tcm_loop: fixup tpgt string to integer conversion ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 15:46:07 +0000