summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-31watchdog: Fix Elan SC520 dependenciesJean Delvare1-1/+1
Anyone using a system based on an AMD Elan SC520 processor would be building a dedicated kernel for it, so we can make the sc520_wdt driver depend on MELAN. SC520_CPUFREQ already depends on MELAN so it makes things more consistent. It also makes kernel configuration for every other x86 user easier. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ib700wdt: Use platform_driver_probeJean Delvare1-12/+9
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: geodewdt: Use platform_driver_probeJean Delvare1-10/+7
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: advantechwdt: Use platform_driver_probeJean Delvare1-12/+9
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: acquirewdt: Use platform_driver_probeJean Delvare1-12/+9
Using platform_driver_probe instead of platform_driver_register has two benefits: * The driver will fail to load if device probing fails. * The probe function can be marked __init. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: iTCO_wdt: Fix the parent deviceJean Delvare1-1/+1
The watchdog's parent is iTCO_wdt (the platform device) not lpc_ich (the PCI device.) Setting the parent right makes it much easier for the user to figure out which driver/module is handling the watchdog device node. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: it87_wdt: Work around non-working CIR interruptsMarc van der Wal2-10/+33
On some hardware platforms, the it87_wdt watchdog resets the machine despite the watchdog daemon running and writing to /dev/watchdog. This is due to Consumer IR buffer underrun interrupts being used as triggers to reset the timer. On some buggy hardware implementations such as the iEi AFL-12A-N270 single-board computer, this method does not work. However, resetting the timer by writing its original timeout value in its configuration register over and over again suppresses the unwanted reboots. Add a module option (nocir), 0 by default in order not to break existing setups. Setting it to 1 enables the workaround. Fixes bug #42801 <https://bugzilla.kernel.org/show_bug.cgi?id=42801>. Tested primarily on Linux 3.5.7, applies cleanly on Linux 3.13.5. Signed-off-by: Marc van der Wal <x0r+kernel@x0r.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: bcm281xx: Fix Kconfig dependencyMarkus Mayer1-1/+1
Use more the applicable ARCH_BCM_MOBILE option instead of ARCH_BCM as dependency for bcm_kona_wdt.c. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Check return value of clk_prepare_enableSachin Kamat1-1/+5
clk_prepare_enable can fail. Check its return value. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: s3c2410_wdt: Remove unneeded initializationSachin Kamat1-2/+0
Initializing clk to NULL as a reset/error condition does not help as NULL is not an invalid condition w.r.t clk. Remove this initialization altogether as there is no state retention. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sunxi: Change compatiblesMaxime Ripard2-4/+4
The Allwinner A10 and A31 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Change the compatibles to match the other pattern in the watchdog controller driver for consistency. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: orion: prepare new Dove DT Kconfig variableSebastian Hesselbarth1-1/+1
DT-enabled Dove will move over from ARCH_DOVE in mach-dove to MACH_DOVE in mach-mvebu. As non-DT ARCH_DOVE will stay to rot for a while, add a new DT-only MACH_DOVE Kconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: fix checkpatch warnings and errorJingoo Han6-14/+13
Fix the following checkpatch warnings and error: WARNING: quoted string split across lines WARNING: braces {} are not necessary for single statement blocks WARNING: __initdata should be placed after ibmasr_id_table[] WARNING: please, no space before tabs ERROR: do not initialise statics to 0 or NULL Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: Add tegra watchdogAndrew Chew4-0/+319
Add a driver for the hardware watchdogs in NVIDIA Tegra SoCs (Tegra30 and later). This driver will configure one watchdog timer that will reset the system in the case of a watchdog timeout. This driver binds to the nvidia,tegra30-timer device node and gets its register base from there. Signed-off-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Remove no_timeout variableMichal Simek1-9/+4
Remove no_timeout variable and check variables directly. Suggested-by: Rob Herring <robherring2@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Enable this driver for ZynqMichal Simek1-13/+9
Enable this driver for Zynq. Move it to architecture independent Kconfig part. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Add missing bindingMichal Simek1-0/+23
Document current driver binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Use correct comment indentationMichal Simek1-4/+4
No functional changes. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Use of_property_read_u32Michal Simek1-17/+12
Use of_property_read_u32 functions to clean probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Fix all printk messagesMichal Simek1-8/+8
Use dev_ functions for printk messages. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Allocate private structure per deviceMichal Simek1-42/+55
Only one watchdog could be used by this driver. Create driver private data structure and move there all variables for one instance. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Move no_timeout to probe functionMichal Simek1-5/+3
no_timeout should be local variable because it is used only in probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Simplify probe and remove functionsMichal Simek1-32/+9
Use devm_ helper function to simplify probe and error path. Move ioremap to the beginning of probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Move control_status_reg to functionsMichal Simek1-1/+6
control_status_reg is temp variables and should be used locally by specific function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: xilinx: Convert driver to the watchdog frameworkMichal Simek2-172/+33
- Remove uneeded headers, fops functions - Use xilinx_wdt prefix in start/stop/keepalive functions and in new structures Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: wdt285: Fix variable typeAlexander Shiyan1-2/+1
Variable "new_margin" is checked in the function watchdog_ioctl() to be non-negative, so change its type to "int". Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: shwdt: Remove unused variableAlexander Shiyan1-2/+0
Variable "wdt" is not used anywhere in the function sh_wdt_remove(). This patch removes this variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sc520_wdt: Remove unused variableAlexander Shiyan1-2/+1
Variable "dummy" is not used anywhere in the function wdt_config(). This patch removes this variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: intel_scu_watchdog: Remove unused variableAlexander Shiyan1-3/+1
Variable "hw_pre_value" is not used anywhere in the function intel_scu_set_heartbeat(). This patch removes this variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: indydog: Simplify indydog_{start,stop}Alexander Shiyan1-11/+2
This patch simplify functions indydog_start() and indydog_stop() a bit and removes excess intermediate variable. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: bcm63xx_wdt: Remove unused field from bcm63xx_wdt_deviceAlexander Shiyan1-1/+0
Field "default_ticks" is not used anywhere in the driver code. This patch removes this field. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: sp805_wdt: Use devm_ioremap_resource()Jingoo Han1-14/+3
Use devm_ioremap_resource() in order to make the code simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: omap_wdt: Use devm_ioremap_resource()Jingoo Han1-16/+6
Use devm_ioremap_resource() in order to make the code simpler, and remove 'struct resource *mem' from 'struct omap_wdt_dev' and omap_wdt_probe(), resplectively. because the 'mem' variables are not used anymore. Also the redundant return value check of platform_get_resource() is removed, because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ep93xx_wdt: Use devm_ioremap_resource()Jingoo Han1-10/+3
Use devm_ioremap_resource() in order to make the code simpler, and remove redundant return value check of platform_get_resource() because the value is checked by devm_ioremap_resource(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: ts72xx_wdt: make 'ts72xx_wdt_pdev' staticJingoo Han1-1/+1
Make 'ts72xx_wdt_pdev' static, because it is used only in this file. It also fixes the following sparse warning. warning: symbol 'ts72xx_wdt_pdev' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: Remove unnecessary OOM messagesJingoo Han8-18/+5
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. For example, k.alloc and v.alloc failures use dump_stack(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> [for at32ap700x] Acked-by: Lubomir Rintel <lkundrak@v3.sk> [for bcm2835] Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [for sp805_wdt] Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> [for ts72xx_wdt] Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31watchdog: delete non-required instances of include <linux/init.h>Paul Gortmaker24-24/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
2014-03-31watchdog: mpc8xxx_wdt: MPC8xx is HW enabledChristophe Leroy1-0/+1
MPC8xx watchdog is enabled at startup by HW. If the bootloader disables it, it cannot be reenabled. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2014-03-31Merge tag 'asoc-v3.15-4' of ↵Takashi Iwai123-833/+1127
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Final updates for v3.15 merge window A few more updates from last week - use of the tdm_slot mapping from Xiubo plus a few smaller fixes and cleanups.
2014-03-31ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cardsOndrej Zary1-1/+29
Add suspend support for M-Audio cards based on ICE1712 chip. Tested with M-Audio Audiophile 24/96. S/PDIF will probably not work. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-31ALSA: ice1712: add suspend support for ICE1712 chipOndrej Zary1-8/+77
Add suspend/resume support for ICE1712 chip. Card-specific subdrivers need to enable it and provide callbacks that suspend/resume the codecs. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-31Merge branch 'for-next' into for-linusTakashi Iwai714-14253/+30599
2014-03-31irqchip: sun7i/sun6i: Disable NMI before registering the handlerHans de Goede1-3/+3
It is advisable to disable the NMI before registering the IRQ handler as registering the IRQ handler unmasks the IRQ on the GIC, so if U-Boot has left the NMI enabled and the NMI pin is active we will immediately get an interrupt before any driver has claimed the downstream interrupt of the NMI. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Carlo Caione <carlo@caione.org> Cc: maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1395939759-11135-3-git-send-email-carlo@caione.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-31ARM: sun7i/sun6i: dts: Fix IRQ number for sun6i NMI controllerHans de Goede1-1/+1
The IRQ line used in sun6i-a31.dtsi for the NMI controller is wrong. This causes a IRQ storm since the NMI controller is repeatedly fired. This patch fixes this problem assigning the correct IRQ number to the NMI controller. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Carlo Caione <carlo@caione.org> Cc: maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1395939759-11135-2-git-send-email-carlo@caione.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-31ALSA: hda - Enable beep for ASUS 1015EW. Trevor King1-0/+1
The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: W. Trevor King <wking@tremily.us> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-31ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()Dan Carpenter1-4/+5
This used to be a part of a condition until f3d145aac913 ('ALSA: asihpi: MMAP for non-busmaster cards') but now it's not and we can remove an indent level. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-03-31arch/avr32/mm/cache.c: export symbol flush_icache_range() for module usingChen Gang1-0/+1
Need export symbol flush_icache_range() to modules, just like another platforms have done, or can not pass compiling. The related error (with allmodconfig under avr32): ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2014-03-31avr32: remove cpu_data macro to fix compilesWolfram Sang2-7/+2
Having cpu_data as a parameterless macro can easily cause build failures because it can be a variable name like in linux/pm_domain.h [1]. So, remove the macro and convert its only user. Because this architecture cannot do SMP, remove the whole SMP block, too. Only compile tested due to no hardware. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> [1] https://lists.01.org/pipermail/kbuild-all/2014-February/003252.html
2014-03-30Linux 3.14Linus Torvalds1-1/+1
2014-03-30Merge branch 'for-linus-2' of ↵Linus Torvalds4-77/+134
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "Switch mnt_hash to hlist, turning the races between __lookup_mnt() and hash modifications into false negatives from __lookup_mnt() (instead of hangs)" On the false negatives from __lookup_mnt(): "The *only* thing we care about is not getting stuck in __lookup_mnt(). If it misses an entry because something in front of it just got moved around, etc, we are fine. We'll notice that mount_lock mismatch and that'll be it" * 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch mnt_hash to hlist don't bother with propagate_mnt() unless the target is shared keep shadowed vfsmounts together resizable namespace.c hashes
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 19:10:12 +0000