summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/device.h2
-rw-r--r--include/linux/dma-mapping.h1
-rw-r--r--include/linux/firmware.h1
-rw-r--r--include/linux/fs.h7
-rw-r--r--include/linux/fsl_devices.h11
-rw-r--r--include/linux/kernel.h1
-rw-r--r--include/linux/mmc/mmc.h1
-rw-r--r--include/linux/mmzone.h1
-rw-r--r--include/linux/netdevice.h23
-rw-r--r--include/linux/rcupdate.h1
-rw-r--r--include/linux/serial_core.h1
-rw-r--r--include/linux/slab.h1
-rw-r--r--include/linux/spi/spi.h45
-rw-r--r--include/linux/spi/spi_bitbang.h8
-rw-r--r--include/linux/swap.h2
-rw-r--r--include/linux/syscalls.h6
-rw-r--r--include/linux/videodev2.h5
17 files changed, 83 insertions, 34 deletions
diff --git a/include/linux/device.h b/include/linux/device.h
index 9943f51cd809..b2e5da2b637b 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -199,6 +199,7 @@ extern int class_device_create_file(struct class_device *,
* @node: for internal use by the driver core only.
* @kobj: for internal use by the driver core only.
* @devt_attr: for internal use by the driver core only.
+ * @groups: optional additional groups to be created
* @dev: if set, a symlink to the struct device is created in the sysfs
* directory for this struct class device.
* @class_data: pointer to whatever you want to store here for this struct
@@ -227,6 +228,7 @@ struct class_device {
struct device * dev; /* not necessary, but nice to have */
void * class_data; /* class-specific data */
struct class_device *parent; /* parent of this child device, if there is one */
+ struct attribute_group ** groups; /* optional groups */
void (*release)(struct class_device *dev);
int (*uevent)(struct class_device *dev, char **envp,
diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h
index ff61817082fa..635690cf3e3d 100644
--- a/include/linux/dma-mapping.h
+++ b/include/linux/dma-mapping.h
@@ -14,6 +14,7 @@ enum dma_data_direction {
};
#define DMA_64BIT_MASK 0xffffffffffffffffULL
+#define DMA_48BIT_MASK 0x0000ffffffffffffULL
#define DMA_40BIT_MASK 0x000000ffffffffffULL
#define DMA_39BIT_MASK 0x0000007fffffffffULL
#define DMA_32BIT_MASK 0x00000000ffffffffULL
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index 2d716080be4a..33d8f2087b6e 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -19,5 +19,4 @@ int request_firmware_nowait(
void (*cont)(const struct firmware *fw, void *context));
void release_firmware(const struct firmware *fw);
-void register_firmware(const char *name, const u8 *data, size_t size);
#endif
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 75a236c268fc..ecc8c2c3d8ca 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -212,6 +212,10 @@ extern int dir_notify_enable;
#define FIBMAP _IO(0x00,1) /* bmap access */
#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
+#define SYNC_FILE_RANGE_WAIT_BEFORE 1
+#define SYNC_FILE_RANGE_WRITE 2
+#define SYNC_FILE_RANGE_WAIT_AFTER 4
+
#ifdef __KERNEL__
#include <linux/linkage.h>
@@ -757,9 +761,6 @@ extern int fcntl_setlease(unsigned int fd, struct file *filp, long arg);
extern int fcntl_getlease(struct file *filp);
/* fs/sync.c */
-#define SYNC_FILE_RANGE_WAIT_BEFORE 1
-#define SYNC_FILE_RANGE_WRITE 2
-#define SYNC_FILE_RANGE_WAIT_AFTER 4
extern int do_sync_file_range(struct file *file, loff_t offset, loff_t endbyte,
unsigned int flags);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a3a0e078f79d..16fbe59edeb1 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -110,5 +110,16 @@ struct fsl_usb2_platform_data {
#define FSL_USB2_PORT0_ENABLED 0x00000001
#define FSL_USB2_PORT1_ENABLED 0x00000002
+struct fsl_spi_platform_data {
+ u32 initial_spmode; /* initial SPMODE value */
+ u16 bus_num;
+
+ /* board specific information */
+ u16 max_chipselect;
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
+ u32 sysclk;
+};
+
#endif /* _FSL_DEVICE_H_ */
#endif /* __KERNEL__ */
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index e1bd0842f6a1..f4fc576ed4c4 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -124,6 +124,7 @@ extern int get_option(char **str, int *pint);
extern char *get_options(const char *str, int nints, int *ints);
extern unsigned long long memparse(char *ptr, char **retptr);
+extern int core_kernel_text(unsigned long addr);
extern int __kernel_text_address(unsigned long addr);
extern int kernel_text_address(unsigned long addr);
extern int session_of_pgrp(int pgrp);
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index bdc556d88498..03a14a30c46a 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -69,6 +69,7 @@ struct mmc_data {
unsigned int timeout_ns; /* data timeout (in ns, max 80ms) */
unsigned int timeout_clks; /* data timeout (in clocks) */
unsigned int blksz_bits; /* data block size */
+ unsigned int blksz; /* data block size */
unsigned int blocks; /* number of blocks */
unsigned int error; /* data error */
unsigned int flags;
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 6be91fb2deb1..230180c3eb61 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -21,6 +21,7 @@
#else
#define MAX_ORDER CONFIG_FORCE_MAX_ZONEORDER
#endif
+#define MAX_ORDER_NR_PAGES (1 << (MAX_ORDER - 1))
struct free_area {
struct list_head free_list;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 5128dd7634cb..cebe677e153b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -432,8 +432,7 @@ struct net_device
/* register/unregister state machine */
enum { NETREG_UNINITIALIZED=0,
- NETREG_REGISTERING, /* called register_netdevice */
- NETREG_REGISTERED, /* completed register todo */
+ NETREG_REGISTERED, /* completed register_netdevice */
NETREG_UNREGISTERING, /* called unregister_netdevice */
NETREG_UNREGISTERED, /* completed unregister todo */
NETREG_RELEASED, /* called free_netdev */
@@ -505,6 +504,8 @@ struct net_device
/* class/net/name entry */
struct class_device class_dev;
+ /* space for optional statistics and wireless sysfs groups */
+ struct attribute_group *sysfs_groups[3];
};
#define NETDEV_ALIGN 32
@@ -828,21 +829,19 @@ static inline void netif_rx_schedule(struct net_device *dev)
__netif_rx_schedule(dev);
}
-
-static inline void __netif_rx_reschedule(struct net_device *dev, int undo)
-{
- dev->quota += undo;
- list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
- __raise_softirq_irqoff(NET_RX_SOFTIRQ);
-}
-
-/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete(). */
+/* Try to reschedule poll. Called by dev->poll() after netif_rx_complete().
+ * Do not inline this?
+ */
static inline int netif_rx_reschedule(struct net_device *dev, int undo)
{
if (netif_rx_schedule_prep(dev)) {
unsigned long flags;
+
+ dev->quota += undo;
+
local_irq_save(flags);
- __netif_rx_reschedule(dev, undo);
+ list_add_tail(&dev->poll_list, &__get_cpu_var(softnet_data).poll_list);
+ __raise_softirq_irqoff(NET_RX_SOFTIRQ);
local_irq_restore(flags);
return 1;
}
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 5673008b61e1..970284f571a6 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -132,6 +132,7 @@ static inline void rcu_bh_qsctr_inc(int cpu)
}
extern int rcu_pending(int cpu);
+extern int rcu_needs_cpu(int cpu);
/**
* rcu_read_lock - mark the beginning of an RCU read-side critical section.
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index fcfb783bef41..94b9286cf6bd 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -253,6 +253,7 @@ struct uart_port {
#define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
#define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
#define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
+#define UPF_DEAD ((__force upf_t) (1 << 30))
#define UPF_IOREMAP ((__force upf_t) (1 << 31))
#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
diff --git a/include/linux/slab.h b/include/linux/slab.h
index a7d7f131b5da..9dc93163e065 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -149,6 +149,7 @@ static inline void *kcalloc(size_t n, size_t size, gfp_t flags)
extern void kfree(const void *);
extern unsigned int ksize(const void *);
+extern int slab_is_available(void);
#ifdef CONFIG_NUMA
extern void *kmem_cache_alloc_node(kmem_cache_t *, gfp_t flags, int node);
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index b05f1463a267..e928c0dcc297 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -31,18 +31,23 @@ extern struct bus_type spi_bus_type;
* @master: SPI controller used with the device.
* @max_speed_hz: Maximum clock rate to be used with this chip
* (on this board); may be changed by the device's driver.
+ * The spi_transfer.speed_hz can override this for each transfer.
* @chip-select: Chipselect, distinguishing chips handled by "master".
* @mode: The spi mode defines how data is clocked out and in.
* This may be changed by the device's driver.
+ * The "active low" default for chipselect mode can be overridden,
+ * as can the "MSB first" default for each word in a transfer.
* @bits_per_word: Data transfers involve one or more words; word sizes
- * like eight or 12 bits are common. In-memory wordsizes are
+ * like eight or 12 bits are common. In-memory wordsizes are
* powers of two bytes (e.g. 20 bit samples use 32 bits).
- * This may be changed by the device's driver.
+ * This may be changed by the device's driver, or left at the
+ * default (0) indicating protocol words are eight bit bytes.
+ * The spi_transfer.bits_per_word can override this for each transfer.
* @irq: Negative, or the number passed to request_irq() to receive
- * interrupts from this device.
+ * interrupts from this device.
* @controller_state: Controller's runtime state
* @controller_data: Board-specific definitions for controller, such as
- * FIFO initialization parameters; from board_info.controller_data
+ * FIFO initialization parameters; from board_info.controller_data
*
* An spi_device is used to interchange data between an SPI slave
* (usually a discrete chip) and CPU memory.
@@ -65,6 +70,7 @@ struct spi_device {
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
#define SPI_CS_HIGH 0x04 /* chipselect active high? */
+#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
u8 bits_per_word;
int irq;
void *controller_state;
@@ -73,7 +79,6 @@ struct spi_device {
// likely need more hooks for more protocol options affecting how
// the controller talks to each chip, like:
- // - bit order (default is wordwise msb-first)
// - memory packing (12 bit samples into low bits, others zeroed)
// - priority
// - drop chipselect after each word
@@ -143,13 +148,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
* struct spi_master - interface to SPI master controller
* @cdev: class interface to this driver
* @bus_num: board-specific (and often SOC-specific) identifier for a
- * given SPI controller.
+ * given SPI controller.
* @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
+ * SPI slaves, and are numbered from zero to num_chipselects.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
* @setup: updates the device mode and clocking records used by a
- * device's SPI controller; protocol code may call this.
+ * device's SPI controller; protocol code may call this.
* @transfer: adds a message to the controller's transfer queue.
* @cleanup: frees controller-specific state
*
@@ -167,13 +172,13 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
struct spi_master {
struct class_device cdev;
- /* other than zero (== assign one dynamically), bus_num is fully
+ /* other than negative (== assign one dynamically), bus_num is fully
* board-specific. usually that simplifies to being SOC-specific.
- * example: one SOC has three SPI controllers, numbered 1..3,
+ * example: one SOC has three SPI controllers, numbered 0..2,
* and one board's schematics might show it using SPI-2. software
* would normally use bus_num=2 for that controller.
*/
- u16 bus_num;
+ s16 bus_num;
/* chipselects will be integral to many controllers; some others
* might use board-specific GPIOs.
@@ -268,10 +273,14 @@ extern struct spi_master *spi_busnum_to_master(u16 busnum);
* @tx_dma: DMA address of tx_buf, if spi_message.is_dma_mapped
* @rx_dma: DMA address of rx_buf, if spi_message.is_dma_mapped
* @len: size of rx and tx buffers (in bytes)
+ * @speed_hz: Select a speed other then the device default for this
+ * transfer. If 0 the default (from spi_device) is used.
+ * @bits_per_word: select a bits_per_word other then the device default
+ * for this transfer. If 0 the default (from spi_device) is used.
* @cs_change: affects chipselect after this transfer completes
* @delay_usecs: microseconds to delay after this transfer before
- * (optionally) changing the chipselect status, then starting
- * the next transfer or completing this spi_message.
+ * (optionally) changing the chipselect status, then starting
+ * the next transfer or completing this spi_message.
* @transfer_list: transfers are sequenced through spi_message.transfers
*
* SPI transfers always write the same number of bytes as they read.
@@ -322,7 +331,9 @@ struct spi_transfer {
dma_addr_t rx_dma;
unsigned cs_change:1;
+ u8 bits_per_word;
u16 delay_usecs;
+ u32 speed_hz;
struct list_head transfer_list;
};
@@ -356,7 +367,7 @@ struct spi_transfer {
* and its transfers, ignore them until its completion callback.
*/
struct spi_message {
- struct list_head transfers;
+ struct list_head transfers;
struct spi_device *spi;
@@ -374,7 +385,7 @@ struct spi_message {
*/
/* completion is reported through a callback */
- void (*complete)(void *context);
+ void (*complete)(void *context);
void *context;
unsigned actual_length;
int status;
diff --git a/include/linux/spi/spi_bitbang.h b/include/linux/spi/spi_bitbang.h
index c961fe9bf3eb..16ce178f54d7 100644
--- a/include/linux/spi/spi_bitbang.h
+++ b/include/linux/spi/spi_bitbang.h
@@ -30,6 +30,12 @@ struct spi_bitbang {
struct spi_master *master;
+ /* setup_transfer() changes clock and/or wordsize to match settings
+ * for this transfer; zeroes restore defaults from spi_device.
+ */
+ int (*setup_transfer)(struct spi_device *spi,
+ struct spi_transfer *t);
+
void (*chipselect)(struct spi_device *spi, int is_on);
#define BITBANG_CS_ACTIVE 1 /* normally nCS, active low */
#define BITBANG_CS_INACTIVE 0
@@ -51,6 +57,8 @@ struct spi_bitbang {
extern int spi_bitbang_setup(struct spi_device *spi);
extern void spi_bitbang_cleanup(const struct spi_device *spi);
extern int spi_bitbang_transfer(struct spi_device *spi, struct spi_message *m);
+extern int spi_bitbang_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t);
/* start or stop queue processing */
extern int spi_bitbang_start(struct spi_bitbang *spi);
diff --git a/include/linux/swap.h b/include/linux/swap.h
index e24fa9b69cbf..aca9bfae208f 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -295,7 +295,7 @@ static inline void disable_swap_token(void)
#define read_swap_cache_async(swp,vma,addr) NULL
#define lookup_swap_cache(swp) NULL
#define valid_swaphandles(swp, off) 0
-#define can_share_swap_page(p) 0
+#define can_share_swap_page(p) (page_mapcount(p) == 1)
#define move_to_swap_cache(p, swp) 1
#define move_from_swap_cache(p, i, m) 1
#define __delete_from_swap_cache(p) /*NOTHING*/
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 70c64dbe4b8a..bd67a4413df7 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -52,6 +52,7 @@ struct utimbuf;
struct mq_attr;
struct compat_stat;
struct compat_timeval;
+struct robust_list_head;
#include <linux/types.h>
#include <linux/aio_abi.h>
@@ -580,5 +581,10 @@ asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags);
asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
unsigned int flags);
+asmlinkage long sys_get_robust_list(int pid,
+ struct robust_list_head __user **head_ptr,
+ size_t __user *len_ptr);
+asmlinkage long sys_set_robust_list(struct robust_list_head __user *head,
+ size_t len);
#endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index d7670ec1ec1e..ad7fa9c86c10 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -1141,8 +1141,13 @@ extern char *v4l2_type_names[];
/* Compatibility layer interface -- v4l1-compat module */
typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file,
unsigned int cmd, void *arg);
+
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
int v4l_compat_translate_ioctl(struct inode *inode, struct file *file,
int cmd, void *arg, v4l2_kioctl driver_ioctl);
+#else
+#define v4l_compat_translate_ioctl(inode,file,cmd,arg,ioctl) -EINVAL
+#endif
/* 32 Bits compatibility layer for 64 bits processors */
extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd,
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 02:53:15 +0000