summaryrefslogtreecommitdiff
path: root/drivers/net/ixgbe/ixgbe_82599.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_82599.c')
-rw-r--r--drivers/net/ixgbe/ixgbe_82599.c228
1 files changed, 147 insertions, 81 deletions
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index a21f5817685b..00aeba385a2f 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
+ Copyright(c) 1999 - 2011 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -112,7 +112,8 @@ static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
goto setup_sfp_out;
/* PHY config will finish before releasing the semaphore */
- ret_val = ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
if (ret_val != 0) {
ret_val = IXGBE_ERR_SWFW_SYNC;
goto setup_sfp_out;
@@ -329,11 +330,14 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
enum ixgbe_media_type media_type;
/* Detect if there is a copper PHY attached. */
- if (hw->phy.type == ixgbe_phy_cu_unknown ||
- hw->phy.type == ixgbe_phy_tn ||
- hw->phy.type == ixgbe_phy_aq) {
+ switch (hw->phy.type) {
+ case ixgbe_phy_cu_unknown:
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
media_type = ixgbe_media_type_copper;
goto out;
+ default:
+ break;
}
switch (hw->device_id) {
@@ -354,6 +358,9 @@ static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
case IXGBE_DEV_ID_82599_CX4:
media_type = ixgbe_media_type_cx4;
break;
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ media_type = ixgbe_media_type_copper;
+ break;
default:
media_type = ixgbe_media_type_unknown;
break;
@@ -411,14 +418,14 @@ static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
return status;
}
- /**
- * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
- * @hw: pointer to hardware structure
- *
- * The base drivers may require better control over SFP+ module
- * PHY states. This includes selectively shutting down the Tx
- * laser on the PHY, effectively halting physical link.
- **/
+/**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
@@ -463,8 +470,6 @@ static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
**/
static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
- hw_dbg(hw, "ixgbe_flap_tx_laser_multispeed_fiber\n");
-
if (hw->mac.autotry_restart) {
ixgbe_disable_tx_laser_multispeed_fiber(hw);
ixgbe_enable_tx_laser_multispeed_fiber(hw);
@@ -487,17 +492,21 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
bool autoneg_wait_to_complete)
{
s32 status = 0;
- ixgbe_link_speed phy_link_speed;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
u32 speedcnt = 0;
u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ u32 i = 0;
bool link_up = false;
bool negotiation;
- int i;
/* Mask off requested but non-supported speeds */
- hw->mac.ops.get_link_capabilities(hw, &phy_link_speed, &negotiation);
- speed &= phy_link_speed;
+ status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
+ &negotiation);
+ if (status != 0)
+ return status;
+
+ speed &= link_speed;
/*
* Try each speed one by one, highest priority first. We do this in
@@ -508,9 +517,12 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
/* If we already have link at this speed, just jump out */
- hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+ status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != 0)
+ return status;
- if ((phy_link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+ if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
goto out;
/* Set the module link speed */
@@ -522,9 +534,9 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
msleep(40);
status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_10GB_FULL,
- autoneg,
- autoneg_wait_to_complete);
+ IXGBE_LINK_SPEED_10GB_FULL,
+ autoneg,
+ autoneg_wait_to_complete);
if (status != 0)
return status;
@@ -536,14 +548,16 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
* Section 73.10.2, we may have to wait up to 500ms if KR is
* attempted. 82599 uses the same timing for 10g SFI.
*/
-
for (i = 0; i < 5; i++) {
/* Wait for the link partner to also set speed */
msleep(100);
/* If we have link, just jump out */
- hw->mac.ops.check_link(hw, &phy_link_speed,
- &link_up, false);
+ status = hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != 0)
+ return status;
+
if (link_up)
goto out;
}
@@ -555,9 +569,12 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
/* If we already have link at this speed, just jump out */
- hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+ status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != 0)
+ return status;
- if ((phy_link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+ if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
goto out;
/* Set the module link speed */
@@ -570,9 +587,9 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
msleep(40);
status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_1GB_FULL,
- autoneg,
- autoneg_wait_to_complete);
+ IXGBE_LINK_SPEED_1GB_FULL,
+ autoneg,
+ autoneg_wait_to_complete);
if (status != 0)
return status;
@@ -583,7 +600,11 @@ s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
msleep(100);
/* If we have link, just jump out */
- hw->mac.ops.check_link(hw, &phy_link_speed, &link_up, false);
+ status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != 0)
+ return status;
+
if (link_up)
goto out;
}
@@ -626,13 +647,10 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
bool autoneg_wait_to_complete)
{
s32 status = 0;
- ixgbe_link_speed link_speed;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
s32 i, j;
bool link_up = false;
u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- struct ixgbe_adapter *adapter = hw->back;
-
- hw_dbg(hw, "ixgbe_setup_mac_link_smartspeed.\n");
/* Set autoneg_advertised value based on input link speed */
hw->phy.autoneg_advertised = 0;
@@ -658,7 +676,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
autoneg_wait_to_complete);
- if (status)
+ if (status != 0)
goto out;
/*
@@ -671,8 +689,11 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
mdelay(100);
/* If we have link, just jump out */
- hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
+ status = hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != 0)
+ goto out;
+
if (link_up)
goto out;
}
@@ -690,7 +711,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
hw->phy.smart_speed_active = true;
status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
autoneg_wait_to_complete);
- if (status)
+ if (status != 0)
goto out;
/*
@@ -703,8 +724,11 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
mdelay(100);
/* If we have link, just jump out */
- hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
+ status = hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != 0)
+ goto out;
+
if (link_up)
goto out;
}
@@ -716,7 +740,7 @@ static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
out:
if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
- e_info(hw, "Smartspeed has downgraded the link speed from "
+ hw_dbg(hw, "Smartspeed has downgraded the link speed from "
"the maximum advertised\n");
return status;
}
@@ -748,6 +772,9 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
/* Check to see if speed passed in is supported. */
hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
+ if (status != 0)
+ goto out;
+
speed &= link_capabilities;
if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
@@ -761,7 +788,6 @@ static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
else
orig_autoc = autoc;
-
if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
@@ -878,7 +904,7 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
/* PHY ops must be identified and initialized prior to reset */
- /* Init PHY and function pointers, perform SFP setup */
+ /* Identify PHY and related function pointers */
status = hw->phy.ops.init(hw);
if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
@@ -890,6 +916,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
hw->phy.sfp_setup_needed = false;
}
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
/* Reset PHY */
if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
hw->phy.ops.reset(hw);
@@ -898,12 +927,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
* Prevent the PCI-E bus from from hanging by disabling PCI-E master
* access and verify no pending requests before reset
*/
- status = ixgbe_disable_pcie_master(hw);
- if (status != 0) {
- status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
- hw_dbg(hw, "PCI-E Master disable polling has failed.\n");
- }
+ ixgbe_disable_pcie_master(hw);
+mac_reset_top:
/*
* Issue global reset to the MAC. This needs to be a SW reset.
* If link reset is used, it might reset the MAC when mng is using it
@@ -924,6 +950,19 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
hw_dbg(hw, "Reset polling failed to complete.\n");
}
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete. We use 1usec since that is
+ * what is needed for ixgbe_disable_pcie_master(). The second reset
+ * then clears out any effects of those events.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ udelay(1);
+ goto mac_reset_top;
+ }
+
msleep(50);
/*
@@ -951,6 +990,9 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
}
}
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
/*
* Store MAC address from RAR0, clear receive address registers, and
* clear the multicast table. Also reset num_rar_entries to 128,
@@ -959,9 +1001,6 @@ static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
hw->mac.num_rar_entries = 128;
hw->mac.ops.init_rx_addrs(hw);
- /* Store the permanent mac address */
- hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
-
/* Store the permanent SAN mac address */
hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
@@ -1733,13 +1772,34 @@ static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
* @hw: pointer to hardware structure
*
* Determines the physical layer module found on the current adapter.
+ * If PHY already detected, maintains current PHY type in hw struct,
+ * otherwise executes the PHY detection routine.
**/
-static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
{
s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+
+ /* Detect PHY if not unknown - returns success if already detected. */
status = ixgbe_identify_phy_generic(hw);
- if (status != 0)
- status = ixgbe_identify_sfp_module_generic(hw);
+ if (status != 0) {
+ /* 82599 10GBASE-T requires an external PHY */
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
+ goto out;
+ else
+ status = ixgbe_identify_sfp_module_generic(hw);
+ }
+
+ /* Set PHY type none if no PHY detected */
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.type = ixgbe_phy_none;
+ status = 0;
+ }
+
+ /* Return error if SFP module has been detected but is not supported */
+ if (hw->phy.type == ixgbe_phy_sfp_unsupported)
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+out:
return status;
}
@@ -1763,11 +1823,12 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
hw->phy.ops.identify(hw);
- if (hw->phy.type == ixgbe_phy_tn ||
- hw->phy.type == ixgbe_phy_aq ||
- hw->phy.type == ixgbe_phy_cu_unknown) {
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
+ case ixgbe_phy_cu_unknown:
hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
- &ext_ability);
+ &ext_ability);
if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
@@ -1775,6 +1836,8 @@ static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
goto out;
+ default:
+ break;
}
switch (autoc & IXGBE_AUTOC_LMS_MASK) {
@@ -1886,6 +1949,7 @@ static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
break;
else
+ /* Use interrupt-safe sleep just in case */
udelay(10);
}
@@ -1995,7 +2059,6 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.set_vmdq = &ixgbe_set_vmdq_generic,
.clear_vmdq = &ixgbe_clear_vmdq_generic,
.init_rx_addrs = &ixgbe_init_rx_addrs_generic,
- .update_uc_addr_list = &ixgbe_update_uc_addr_list_generic,
.update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
.enable_mc = &ixgbe_enable_mc_generic,
.disable_mc = &ixgbe_disable_mc_generic,
@@ -2006,31 +2069,34 @@ static struct ixgbe_mac_operations mac_ops_82599 = {
.setup_sfp = &ixgbe_setup_sfp_modules_82599,
.set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+ .acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
+ .release_swfw_sync = &ixgbe_release_swfw_sync,
+
};
static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
- .init_params = &ixgbe_init_eeprom_params_generic,
- .read = &ixgbe_read_eerd_generic,
- .write = &ixgbe_write_eeprom_generic,
- .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
- .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
- .update_checksum = &ixgbe_update_eeprom_checksum_generic,
+ .init_params = &ixgbe_init_eeprom_params_generic,
+ .read = &ixgbe_read_eerd_generic,
+ .write = &ixgbe_write_eeprom_generic,
+ .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
+ .update_checksum = &ixgbe_update_eeprom_checksum_generic,
};
static struct ixgbe_phy_operations phy_ops_82599 = {
- .identify = &ixgbe_identify_phy_82599,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
- .init = &ixgbe_init_phy_ops_82599,
- .reset = &ixgbe_reset_phy_generic,
- .read_reg = &ixgbe_read_phy_reg_generic,
- .write_reg = &ixgbe_write_phy_reg_generic,
- .setup_link = &ixgbe_setup_phy_link_generic,
- .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
- .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
- .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
- .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
- .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
- .check_overtemp = &ixgbe_tn_check_overtemp,
+ .identify = &ixgbe_identify_phy_82599,
+ .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .init = &ixgbe_init_phy_ops_82599,
+ .reset = &ixgbe_reset_phy_generic,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
+ .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
+ .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
+ .check_overtemp = &ixgbe_tn_check_overtemp,
};
struct ixgbe_info ixgbe_82599_info = {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 23:27:30 +0000