diff options
Diffstat (limited to 'drivers/mfd/88pm800.c')
| -rw-r--r-- | drivers/mfd/88pm800.c | 593 |
1 files changed, 593 insertions, 0 deletions
diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c new file mode 100644 index 000000000000..fe479ccfaa19 --- /dev/null +++ b/drivers/mfd/88pm800.c @@ -0,0 +1,593 @@ +/* + * Base driver for Marvell 88PM800 + * + * Copyright (C) 2012 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * Joseph(Yossi) Hanin <yhanin@marvell.com> + * Qiao Zhou <zhouqiao@marvell.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/mfd/core.h> +#include <linux/mfd/88pm80x.h> +#include <linux/slab.h> + +#define PM800_CHIP_ID (0x00) + +/* Interrupt Registers */ +#define PM800_INT_STATUS1 (0x05) +#define PM800_ONKEY_INT_STS1 (1 << 0) +#define PM800_EXTON_INT_STS1 (1 << 1) +#define PM800_CHG_INT_STS1 (1 << 2) +#define PM800_BAT_INT_STS1 (1 << 3) +#define PM800_RTC_INT_STS1 (1 << 4) +#define PM800_CLASSD_OC_INT_STS1 (1 << 5) + +#define PM800_INT_STATUS2 (0x06) +#define PM800_VBAT_INT_STS2 (1 << 0) +#define PM800_VSYS_INT_STS2 (1 << 1) +#define PM800_VCHG_INT_STS2 (1 << 2) +#define PM800_TINT_INT_STS2 (1 << 3) +#define PM800_GPADC0_INT_STS2 (1 << 4) +#define PM800_TBAT_INT_STS2 (1 << 5) +#define PM800_GPADC2_INT_STS2 (1 << 6) +#define PM800_GPADC3_INT_STS2 (1 << 7) + +#define PM800_INT_STATUS3 (0x07) + +#define PM800_INT_STATUS4 (0x08) +#define PM800_GPIO0_INT_STS4 (1 << 0) +#define PM800_GPIO1_INT_STS4 (1 << 1) +#define PM800_GPIO2_INT_STS4 (1 << 2) +#define PM800_GPIO3_INT_STS4 (1 << 3) +#define PM800_GPIO4_INT_STS4 (1 << 4) + +#define PM800_INT_ENA_1 (0x09) +#define PM800_ONKEY_INT_ENA1 (1 << 0) +#define PM800_EXTON_INT_ENA1 (1 << 1) +#define PM800_CHG_INT_ENA1 (1 << 2) +#define PM800_BAT_INT_ENA1 (1 << 3) +#define PM800_RTC_INT_ENA1 (1 << 4) +#define PM800_CLASSD_OC_INT_ENA1 (1 << 5) + +#define PM800_INT_ENA_2 (0x0A) +#define PM800_VBAT_INT_ENA2 (1 << 0) +#define PM800_VSYS_INT_ENA2 (1 << 1) +#define PM800_VCHG_INT_ENA2 (1 << 2) +#define PM800_TINT_INT_ENA2 (1 << 3) + +#define PM800_INT_ENA_3 (0x0B) +#define PM800_GPADC0_INT_ENA3 (1 << 0) +#define PM800_GPADC1_INT_ENA3 (1 << 1) +#define PM800_GPADC2_INT_ENA3 (1 << 2) +#define PM800_GPADC3_INT_ENA3 (1 << 3) +#define PM800_GPADC4_INT_ENA3 (1 << 4) + +#define PM800_INT_ENA_4 (0x0C) +#define PM800_GPIO0_INT_ENA4 (1 << 0) +#define PM800_GPIO1_INT_ENA4 (1 << 1) +#define PM800_GPIO2_INT_ENA4 (1 << 2) +#define PM800_GPIO3_INT_ENA4 (1 << 3) +#define PM800_GPIO4_INT_ENA4 (1 << 4) + +/* number of INT_ENA & INT_STATUS regs */ +#define PM800_INT_REG_NUM (4) + +/* Interrupt Number in 88PM800 */ +enum { + PM800_IRQ_ONKEY, /*EN1b0 *//*0 */ + PM800_IRQ_EXTON, /*EN1b1 */ + PM800_IRQ_CHG, /*EN1b2 */ + PM800_IRQ_BAT, /*EN1b3 */ + PM800_IRQ_RTC, /*EN1b4 */ + PM800_IRQ_CLASSD, /*EN1b5 *//*5 */ + PM800_IRQ_VBAT, /*EN2b0 */ + PM800_IRQ_VSYS, /*EN2b1 */ + PM800_IRQ_VCHG, /*EN2b2 */ + PM800_IRQ_TINT, /*EN2b3 */ + PM800_IRQ_GPADC0, /*EN3b0 *//*10 */ + PM800_IRQ_GPADC1, /*EN3b1 */ + PM800_IRQ_GPADC2, /*EN3b2 */ + PM800_IRQ_GPADC3, /*EN3b3 */ + PM800_IRQ_GPADC4, /*EN3b4 */ + PM800_IRQ_GPIO0, /*EN4b0 *//*15 */ + PM800_IRQ_GPIO1, /*EN4b1 */ + PM800_IRQ_GPIO2, /*EN4b2 */ + PM800_IRQ_GPIO3, /*EN4b3 */ + PM800_IRQ_GPIO4, /*EN4b4 *//*19 */ + PM800_MAX_IRQ, +}; + +enum { + /* Procida */ + PM800_CHIP_A0 = 0x60, + PM800_CHIP_A1 = 0x61, + PM800_CHIP_B0 = 0x62, + PM800_CHIP_C0 = 0x63, + PM800_CHIP_END = PM800_CHIP_C0, + + /* Make sure to update this to the last stepping */ + PM8XXX_CHIP_END = PM800_CHIP_END +}; + +static const struct i2c_device_id pm80x_id_table[] = { + {"88PM800", CHIP_PM800}, +}; +MODULE_DEVICE_TABLE(i2c, pm80x_id_table); + +static struct resource rtc_resources[] = { + { + .name = "88pm80x-rtc", + .start = PM800_IRQ_RTC, + .end = PM800_IRQ_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell rtc_devs[] = { + { + .name = "88pm80x-rtc", + .num_resources = ARRAY_SIZE(rtc_resources), + .resources = &rtc_resources[0], + .id = -1, + }, +}; + +static struct resource onkey_resources[] = { + { + .name = "88pm80x-onkey", + .start = PM800_IRQ_ONKEY, + .end = PM800_IRQ_ONKEY, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell onkey_devs[] = { + { + .name = "88pm80x-onkey", + .num_resources = 1, + .resources = &onkey_resources[0], + .id = -1, + }, +}; + +static const struct regmap_irq pm800_irqs[] = { + /* INT0 */ + [PM800_IRQ_ONKEY] = { + .mask = PM800_ONKEY_INT_ENA1, + }, + [PM800_IRQ_EXTON] = { + .mask = PM800_EXTON_INT_ENA1, + }, + [PM800_IRQ_CHG] = { + .mask = PM800_CHG_INT_ENA1, + }, + [PM800_IRQ_BAT] = { + .mask = PM800_BAT_INT_ENA1, + }, + [PM800_IRQ_RTC] = { + .mask = PM800_RTC_INT_ENA1, + }, + [PM800_IRQ_CLASSD] = { + .mask = PM800_CLASSD_OC_INT_ENA1, + }, + /* INT1 */ + [PM800_IRQ_VBAT] = { + .reg_offset = 1, + .mask = PM800_VBAT_INT_ENA2, + }, + [PM800_IRQ_VSYS] = { + .reg_offset = 1, + .mask = PM800_VSYS_INT_ENA2, + }, + [PM800_IRQ_VCHG] = { + .reg_offset = 1, + .mask = PM800_VCHG_INT_ENA2, + }, + [PM800_IRQ_TINT] = { + .reg_offset = 1, + .mask = PM800_TINT_INT_ENA2, + }, + /* INT2 */ + [PM800_IRQ_GPADC0] = { + .reg_offset = 2, + .mask = PM800_GPADC0_INT_ENA3, + }, + [PM800_IRQ_GPADC1] = { + .reg_offset = 2, + .mask = PM800_GPADC1_INT_ENA3, + }, + [PM800_IRQ_GPADC2] = { + .reg_offset = 2, + .mask = PM800_GPADC2_INT_ENA3, + }, + [PM800_IRQ_GPADC3] = { + .reg_offset = 2, + .mask = PM800_GPADC3_INT_ENA3, + }, + [PM800_IRQ_GPADC4] = { + .reg_offset = 2, + .mask = PM800_GPADC4_INT_ENA3, + }, + /* INT3 */ + [PM800_IRQ_GPIO0] = { + .reg_offset = 3, + .mask = PM800_GPIO0_INT_ENA4, + }, + [PM800_IRQ_GPIO1] = { + .reg_offset = 3, + .mask = PM800_GPIO1_INT_ENA4, + }, + [PM800_IRQ_GPIO2] = { + .reg_offset = 3, + .mask = PM800_GPIO2_INT_ENA4, + }, + [PM800_IRQ_GPIO3] = { + .reg_offset = 3, + .mask = PM800_GPIO3_INT_ENA4, + }, + [PM800_IRQ_GPIO4] = { + .reg_offset = 3, + .mask = PM800_GPIO4_INT_ENA4, + }, +}; + +static int __devinit device_gpadc_init(struct pm80x_chip *chip, + struct pm80x_platform_data *pdata) +{ + struct pm80x_subchip *subchip = chip->subchip; + struct regmap *map = subchip->regmap_gpadc; + int data = 0, mask = 0, ret = 0; + + if (!map) { + dev_warn(chip->dev, + "Warning: gpadc regmap is not available!\n"); + return -EINVAL; + } + /* + * initialize GPADC without activating it turn on GPADC + * measurments + */ + ret = regmap_update_bits(map, + PM800_GPADC_MISC_CONFIG2, + PM800_GPADC_MISC_GPFSM_EN, + PM800_GPADC_MISC_GPFSM_EN); + if (ret < 0) + goto out; + /* + * This function configures the ADC as requires for + * CP implementation.CP does not "own" the ADC configuration + * registers and relies on AP. + * Reason: enable automatic ADC measurements needed + * for CP to get VBAT and RF temperature readings. + */ + ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN1, + PM800_MEAS_EN1_VBAT, PM800_MEAS_EN1_VBAT); + if (ret < 0) + goto out; + ret = regmap_update_bits(map, PM800_GPADC_MEAS_EN2, + (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN), + (PM800_MEAS_EN2_RFTMP | PM800_MEAS_GP0_EN)); + if (ret < 0) + goto out; + + /* + * the defult of PM800 is GPADC operates at 100Ks/s rate + * and Number of GPADC slots with active current bias prior + * to GPADC sampling = 1 slot for all GPADCs set for + * Temprature mesurmants + */ + mask = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 | + PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3); + + if (pdata && (pdata->batt_det == 0)) + data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN1 | + PM800_GPADC_GP_BIAS_EN2 | PM800_GPADC_GP_BIAS_EN3); + else + data = (PM800_GPADC_GP_BIAS_EN0 | PM800_GPADC_GP_BIAS_EN2 | + PM800_GPADC_GP_BIAS_EN3); + + ret = regmap_update_bits(map, PM800_GP_BIAS_ENA1, mask, data); + if (ret < 0) + goto out; + + dev_info(chip->dev, "pm800 device_gpadc_init: Done\n"); + return 0; + +out: + dev_info(chip->dev, "pm800 device_gpadc_init: Failed!\n"); + return ret; +} + +static int __devinit device_irq_init_800(struct pm80x_chip *chip) +{ + struct regmap *map = chip->regmap; + unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; + int data, mask, ret = -EINVAL; + + if (!map || !chip->irq) { + dev_err(chip->dev, "incorrect parameters\n"); + return -EINVAL; + } + + /* + * irq_mode defines the way of clearing interrupt. it's read-clear by + * default. + */ + mask = + PM800_WAKEUP2_INV_INT | PM800_WAKEUP2_INT_CLEAR | + PM800_WAKEUP2_INT_MASK; + + data = PM800_WAKEUP2_INT_CLEAR; + ret = regmap_update_bits(map, PM800_WAKEUP2, mask, data); + + if (ret < 0) + goto out; + + ret = + regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, + chip->regmap_irq_chip, &chip->irq_data); + +out: + return ret; +} + +static void device_irq_exit_800(struct pm80x_chip *chip) +{ + regmap_del_irq_chip(chip->irq, chip->irq_data); +} + +static struct regmap_irq_chip pm800_irq_chip = { + .name = "88pm800", + .irqs = pm800_irqs, + .num_irqs = ARRAY_SIZE(pm800_irqs), + + .num_regs = 4, + .status_base = PM800_INT_STATUS1, + .mask_base = PM800_INT_ENA_1, + .ack_base = PM800_INT_STATUS1, +}; + +static int pm800_pages_init(struct pm80x_chip *chip) +{ + struct pm80x_subchip *subchip; + struct i2c_client *client = chip->client; + + subchip = chip->subchip; + /* PM800 block power: i2c addr 0x31 */ + if (subchip->power_page_addr) { + subchip->power_page = + i2c_new_dummy(client->adapter, subchip->power_page_addr); + subchip->regmap_power = + devm_regmap_init_i2c(subchip->power_page, + &pm80x_regmap_config); + i2c_set_clientdata(subchip->power_page, chip); + } else + dev_info(chip->dev, + "PM800 block power 0x31: No power_page_addr\n"); + + /* PM800 block GPADC: i2c addr 0x32 */ + if (subchip->gpadc_page_addr) { + subchip->gpadc_page = i2c_new_dummy(client->adapter, + subchip->gpadc_page_addr); + subchip->regmap_gpadc = + devm_regmap_init_i2c(subchip->gpadc_page, + &pm80x_regmap_config); + i2c_set_clientdata(subchip->gpadc_page, chip); + } else + dev_info(chip->dev, + "PM800 block GPADC 0x32: No gpadc_page_addr\n"); + + return 0; +} + +static void pm800_pages_exit(struct pm80x_chip *chip) +{ + struct pm80x_subchip *subchip; + + regmap_exit(chip->regmap); + i2c_unregister_device(chip->client); + + subchip = chip->subchip; + if (subchip->power_page) { + regmap_exit(subchip->regmap_power); + i2c_unregister_device(subchip->power_page); + } + if (subchip->gpadc_page) { + regmap_exit(subchip->regmap_gpadc); + i2c_unregister_device(subchip->gpadc_page); + } +} + +static int __devinit device_800_init(struct pm80x_chip *chip, + struct pm80x_platform_data *pdata) +{ + int ret, pmic_id; + + regmap_read(chip->regmap, PM800_CHIP_ID, &ret); + if (ret < 0) { + dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret); + goto out; + } + + pmic_id = ret & PM80X_VERSION_MASK; + + if ((pmic_id >= PM800_CHIP_A0) && (pmic_id <= PM800_CHIP_END)) { + chip->version = ret; + dev_info(chip->dev, + "88PM80x:Marvell 88PM800 (ID:0x%x) detected\n", ret); + } else { + dev_err(chip->dev, + "Failed to detect Marvell 88PM800:ChipID[0x%x]\n", ret); + goto out; + } + + /* + * alarm wake up bit will be clear in device_irq_init(), + * read before that + */ + regmap_read(chip->regmap, PM800_RTC_CONTROL, &ret); + if (ret < 0) { + dev_err(chip->dev, "Failed to read RTC register: %d\n", ret); + goto out; + } + if (ret & PM800_ALARM_WAKEUP) { + if (pdata && pdata->rtc) + pdata->rtc->rtc_wakeup = 1; + } + + ret = device_gpadc_init(chip, pdata); + if (ret < 0) { + dev_err(chip->dev, "[%s]Failed to init gpadc\n", __func__); + goto out; + } + + chip->regmap_irq_chip = &pm800_irq_chip; + + ret = device_irq_init_800(chip); + if (ret < 0) { + dev_err(chip->dev, "[%s]Failed to init pm800 irq\n", __func__); + goto out; + } + + ret = + mfd_add_devices(chip->dev, 0, &onkey_devs[0], + ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0); + if (ret < 0) { + dev_err(chip->dev, "Failed to add onkey subdev\n"); + goto out_dev; + } else + dev_info(chip->dev, "[%s]:Added mfd onkey_devs\n", __func__); + + if (pdata && pdata->rtc) { + rtc_devs[0].platform_data = pdata->rtc; + rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata); + ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], + ARRAY_SIZE(rtc_devs), NULL, 0); + if (ret < 0) { + dev_err(chip->dev, "Failed to add rtc subdev\n"); + goto out_dev; + } else + dev_info(chip->dev, + "[%s]:Added mfd rtc_devs\n", __func__); + } + + return 0; +out_dev: + mfd_remove_devices(chip->dev); + device_irq_exit_800(chip); +out: + return ret; +} + +static int __devinit pm800_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct pm80x_chip *chip; + struct pm80x_platform_data *pdata = client->dev.platform_data; + struct pm80x_subchip *subchip; + + ret = pm80x_init(client, id); + if (ret) { + dev_err(&client->dev, "pm800_init fail\n"); + goto out_init; + } + + chip = i2c_get_clientdata(client); + + /* init subchip for PM800 */ + subchip = + devm_kzalloc(&client->dev, sizeof(struct pm80x_subchip), + GFP_KERNEL); + if (!subchip) { + ret = -ENOMEM; + goto err_subchip_alloc; + } + + subchip->power_page_addr = pdata->power_page_addr; + subchip->gpadc_page_addr = pdata->gpadc_page_addr; + chip->subchip = subchip; + + ret = device_800_init(chip, pdata); + if (ret) { + dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id); + goto err_800_init; + } + + ret = pm800_pages_init(chip); + if (ret) { + dev_err(&client->dev, "pm800_pages_init failed!\n"); + goto err_page_init; + } + + if (pdata->plat_config) + pdata->plat_config(chip, pdata); + +err_page_init: + mfd_remove_devices(chip->dev); + device_irq_exit_800(chip); +err_800_init: + devm_kfree(&client->dev, subchip); +err_subchip_alloc: + pm80x_deinit(client); +out_init: + return ret; +} + +static int __devexit pm800_remove(struct i2c_client *client) +{ + struct pm80x_chip *chip = i2c_get_clientdata(client); + + mfd_remove_devices(chip->dev); + device_irq_exit_800(chip); + + pm800_pages_exit(chip); + devm_kfree(&client->dev, chip->subchip); + + pm80x_deinit(client); + + return 0; +} + +static struct i2c_driver pm800_driver = { + .driver = { + .name = "88PM80X", + .owner = THIS_MODULE, + .pm = &pm80x_pm_ops, + }, + .probe = pm800_probe, + .remove = __devexit_p(pm800_remove), + .id_table = pm80x_id_table, +}; + +static int __init pm800_i2c_init(void) +{ + return i2c_add_driver(&pm800_driver); +} +subsys_initcall(pm800_i2c_init); + +static void __exit pm800_i2c_exit(void) +{ + i2c_del_driver(&pm800_driver); +} +module_exit(pm800_i2c_exit); + +MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM800"); +MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>"); +MODULE_LICENSE("GPL"); |