diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/x86/Makefile | 237 | ||||
| -rw-r--r-- | arch/x86/Makefile_32 | 177 | ||||
| -rw-r--r-- | arch/x86/Makefile_64 | 142 |
3 files changed, 233 insertions, 323 deletions
diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 7aa1dc6d67c8..d3debde0ce0b 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -7,13 +7,242 @@ else KBUILD_DEFCONFIG := $(ARCH)_defconfig endif -# No need to remake these files -$(srctree)/arch/x86/Makefile%: ; +# BITS is used as extension for files which are available in a 32 bit +# and a 64 bit version to simplify shared Makefiles. +# e.g.: obj-y += foo_$(BITS).o +export BITS ifeq ($(CONFIG_X86_32),y) + BITS := 32 UTS_MACHINE := i386 - include $(srctree)/arch/x86/Makefile_32 + + HAS_BIARCH := $(call cc-option-yn, -m32) + ifeq ($(HAS_BIARCH),y) + AS := $(AS) --32 + LD := $(LD) -m elf_i386 + CC := $(CC) -m32 + endif + + ifdef CONFIG_RELOCATABLE + LDFLAGS_vmlinux := --emit-relocs + endif + CHECKFLAGS += -D__i386__ + + KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return + + # prevent gcc from keeping the stack 16 byte aligned + KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) + + # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use + # a lot more stack due to the lack of sharing of stacklots: + KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then \ + echo $(call cc-option,-fno-unit-at-a-time); fi ;) + + # CPU-specific tuning. Anything which can be shared with UML should go here. + include $(srctree)/arch/x86/Makefile_32.cpu + KBUILD_CFLAGS += $(cflags-y) + + # temporary until string.h is fixed + KBUILD_CFLAGS += -ffreestanding else + BITS := 64 UTS_MACHINE := x86_64 - include $(srctree)/arch/x86/Makefile_64 + CHECKFLAGS += -D__x86_64__ -m64 + + KBUILD_AFLAGS += -m64 + KBUILD_CFLAGS += -m64 + + # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu) + cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) + cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona) + + cflags-$(CONFIG_MCORE2) += \ + $(call cc-option,-march=core2,$(call cc-option,-mtune=generic)) + cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic) + KBUILD_CFLAGS += $(cflags-y) + + KBUILD_CFLAGS += -mno-red-zone + KBUILD_CFLAGS += -mcmodel=kernel + + KBUILD_CFLAGS += -Wno-sign-compare + KBUILD_CFLAGS += -fno-asynchronous-unwind-tables + # -funit-at-a-time shrinks the kernel .text considerably + # unfortunately it makes reading oopses harder. + KBUILD_CFLAGS += $(call cc-option,-funit-at-a-time) + + # prevent gcc from generating any FP code by mistake + KBUILD_CFLAGS += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) + # this works around some issues with generating unwind tables in older gccs + # newer gccs do it by default + KBUILD_CFLAGS += -maccumulate-outgoing-args + + stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh + stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \ + "$(CC)" -fstack-protector ) + stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \ + "$(CC)" -fstack-protector-all ) + + KBUILD_CFLAGS += $(stackp-y) +endif + +# Stackpointer is addressed different for 32 bit and 64 bit x86 +sp-$(CONFIG_X86_32) := esp +sp-$(CONFIG_X86_64) := rsp + +# do binutils support CFI? +cfi := $(call as-instr,.cfi_startproc\n.cfi_rel_offset $(sp-y)$(comma)0\n.cfi_endproc,-DCONFIG_AS_CFI=1) +# is .cfi_signal_frame supported too? +cfi-sigframe := $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1) +KBUILD_AFLAGS += $(cfi) $(cfi-sigframe) +KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) + +LDFLAGS := -m elf_$(UTS_MACHINE) +OBJCOPYFLAGS := -O binary -R .note -R .comment -S +KBUILD_CFLAGS += -pipe + +### +# Sub architecture support +# fcore-y is linked before mcore-y files. + +# Default subarch .c files +mcore-y := arch/x86/mach-default/ + +# Voyager subarch support +mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager +mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager/ + +# VISWS subarch support +mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws +mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws/ + +# NUMAQ subarch support +mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq +mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default/ + +# BIGSMP subarch support +mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp +mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default/ + +#Summit subarch support +mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit +mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default/ + +# generic subarchitecture +mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic +fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/ +mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/ + + +# ES7000 subarch support +mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000 +fcore-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/ +mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default/ + +# default subarch .h files +mflags-y += -Iinclude/asm-x86/mach-default + +# 64 bit does not support subarch support - clear sub arch variables +fcore-$(CONFIG_X86_64) := +mcore-$(CONFIG_X86_64) := +mflags-$(CONFIG_X86_64) := + +KBUILD_CFLAGS += $(mflags-y) +KBUILD_AFLAGS += $(mflags-y) + +### +# Kernel objects + +head-y := arch/x86/kernel/head_$(BITS).o +head-$(CONFIG_X86_64) += arch/x86/kernel/head64.o +head-y += arch/x86/kernel/init_task.o + +libs-y += arch/x86/lib/ + +# Sub architecture files that needs linking first +core-y += $(fcore-y) + +# Xen paravirtualization support +core-$(CONFIG_XEN) += arch/x86/xen/ + +# lguest paravirtualization support +core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/ + +core-y += arch/x86/kernel/ +core-y += arch/x86/mm/ + +# Remaining sub architecture files +core-y += $(mcore-y) + +core-y += arch/x86/crypto/ +core-y += arch/x86/vdso/ +core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/ + +# drivers-y are linked after core-y +drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ +drivers-$(CONFIG_PCI) += arch/x86/pci/ + +# must be linked after kernel/ +drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ + +ifeq ($(CONFIG_X86_32),y) +drivers-$(CONFIG_PM) += arch/x86/power/ +drivers-$(CONFIG_FB) += arch/x86/video/ endif + +#### +# boot loader support. Several targets are kept for legacy purposes + +boot := arch/x86/boot + +PHONY += zImage bzImage compressed zlilo bzlilo \ + zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install + +# Default kernel to build +all: bzImage + +# KBUILD_IMAGE specify target image being built + KBUILD_IMAGE := $(boot)/bzImage +zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage + +zImage bzImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) + $(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot + $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/bzImage + +compressed: zImage + +zlilo bzlilo: vmlinux + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo + +zdisk bzdisk: vmlinux + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk + +fdimage fdimage144 fdimage288 isoimage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ + +install: vdso_install + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install + +PHONY += vdso_install +vdso_install: + $(Q)$(MAKE) $(build)=arch/x86/vdso $@ + +archclean: + $(Q)rm -rf $(objtree)/arch/i386 + $(Q)rm -rf $(objtree)/arch/x86_64 + $(Q)$(MAKE) $(clean)=$(boot) + +define archhelp + echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' + echo ' install - Install kernel using' + echo ' (your) ~/bin/installkernel or' + echo ' (distribution) /sbin/installkernel or' + echo ' install to $$(INSTALL_PATH) and run lilo' + echo ' bzdisk - Create a boot floppy in /dev/fd0' + echo ' fdimage - Create a boot floppy image' + echo ' isoimage - Create a boot CD-ROM image' +endef + +CLEAN_FILES += arch/x86/boot/fdimage \ + arch/x86/boot/image.iso \ + arch/x86/boot/mtools.conf diff --git a/arch/x86/Makefile_32 b/arch/x86/Makefile_32 deleted file mode 100644 index 5c6724de904e..000000000000 --- a/arch/x86/Makefile_32 +++ /dev/null @@ -1,177 +0,0 @@ -# -# i386 Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" cleaning up for this architecture. -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# -# 19990713 Artur Skawina <skawina@geocities.com> -# Added '-march' and '-mpreferred-stack-boundary' support -# -# 20050320 Kianusch Sayah Karadji <kianusch@sk-tech.net> -# Added support for GEODE CPU - -# BITS is used as extension for files which are available in a 32 bit -# and a 64 bit version to simplify shared Makefiles. -# e.g.: obj-y += foo_$(BITS).o -BITS := 32 -export BITS - -HAS_BIARCH := $(call cc-option-yn, -m32) -ifeq ($(HAS_BIARCH),y) -AS := $(AS) --32 -LD := $(LD) -m elf_i386 -CC := $(CC) -m32 -endif - -LDFLAGS := -m elf_i386 -OBJCOPYFLAGS := -O binary -R .note -R .comment -S -ifdef CONFIG_RELOCATABLE -LDFLAGS_vmlinux := --emit-relocs -endif -CHECKFLAGS += -D__i386__ - -KBUILD_CFLAGS += -pipe -msoft-float -mregparm=3 -freg-struct-return - -# prevent gcc from keeping the stack 16 byte aligned -KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2) - -# CPU-specific tuning. Anything which can be shared with UML should go here. -include $(srctree)/arch/x86/Makefile_32.cpu - -# temporary until string.h is fixed -cflags-y += -ffreestanding - -# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use -# a lot more stack due to the lack of sharing of stacklots: -KBUILD_CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) - -# do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset esp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) - -# is .cfi_signal_frame supported too? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) -KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) - -KBUILD_CFLAGS += $(cflags-y) - -# Default subarch .c files -mcore-y := arch/x86/mach-default - -# Voyager subarch support -mflags-$(CONFIG_X86_VOYAGER) := -Iinclude/asm-x86/mach-voyager -mcore-$(CONFIG_X86_VOYAGER) := arch/x86/mach-voyager - -# VISWS subarch support -mflags-$(CONFIG_X86_VISWS) := -Iinclude/asm-x86/mach-visws -mcore-$(CONFIG_X86_VISWS) := arch/x86/mach-visws - -# NUMAQ subarch support -mflags-$(CONFIG_X86_NUMAQ) := -Iinclude/asm-x86/mach-numaq -mcore-$(CONFIG_X86_NUMAQ) := arch/x86/mach-default - -# BIGSMP subarch support -mflags-$(CONFIG_X86_BIGSMP) := -Iinclude/asm-x86/mach-bigsmp -mcore-$(CONFIG_X86_BIGSMP) := arch/x86/mach-default - -#Summit subarch support -mflags-$(CONFIG_X86_SUMMIT) := -Iinclude/asm-x86/mach-summit -mcore-$(CONFIG_X86_SUMMIT) := arch/x86/mach-default - -# generic subarchitecture -mflags-$(CONFIG_X86_GENERICARCH) := -Iinclude/asm-x86/mach-generic -mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default -core-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/ - -# ES7000 subarch support -mflags-$(CONFIG_X86_ES7000) := -Iinclude/asm-x86/mach-es7000 -mcore-$(CONFIG_X86_ES7000) := arch/x86/mach-default -core-$(CONFIG_X86_ES7000) := arch/x86/mach-es7000/ - -# Xen paravirtualization support -core-$(CONFIG_XEN) += arch/x86/xen/ - -# lguest paravirtualization support -core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/ - -# default subarch .h files -mflags-y += -Iinclude/asm-x86/mach-default - -head-y := arch/x86/kernel/head_32.o arch/x86/kernel/init_task.o - -libs-y += arch/x86/lib/ -core-y += arch/x86/kernel/ \ - arch/x86/mm/ \ - $(mcore-y)/ \ - arch/x86/crypto/ \ - arch/x86/vdso/ -drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/ -drivers-$(CONFIG_PCI) += arch/x86/pci/ -# must be linked after kernel/ -drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ -drivers-$(CONFIG_PM) += arch/x86/power/ -drivers-$(CONFIG_FB) += arch/x86/video/ - -KBUILD_CFLAGS += $(mflags-y) -KBUILD_AFLAGS += $(mflags-y) - -boot := arch/x86/boot - -PHONY += zImage bzImage compressed zlilo bzlilo \ - zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install - -all: bzImage - -# KBUILD_IMAGE specify target image being built - KBUILD_IMAGE := $(boot)/bzImage -zImage zlilo zdisk: KBUILD_IMAGE := arch/x86/boot/zImage - -zImage bzImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE) - $(Q)mkdir -p $(objtree)/arch/i386/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/i386/boot/bzImage - -compressed: zImage - -zlilo bzlilo: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo - -zdisk bzdisk: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk - -fdimage fdimage144 fdimage288 isoimage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ - -install: vdso_install - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install - -PHONY += vdso_install -vdso_install: - $(Q)$(MAKE) $(build)=arch/x86/vdso $@ - -archclean: - $(Q)rm -rf $(objtree)/arch/i386 - $(Q)rm -rf $(objtree)/arch/x86_64 - $(Q)$(MAKE) $(clean)=arch/x86/boot - -define archhelp - echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' - echo ' install - Install kernel using' - echo ' (your) ~/bin/installkernel or' - echo ' (distribution) /sbin/installkernel or' - echo ' install to $$(INSTALL_PATH) and run lilo' - echo ' bzdisk - Create a boot floppy in /dev/fd0' - echo ' fdimage - Create a boot floppy image' - echo ' isoimage - Create a boot CD-ROM image' -endef - -CLEAN_FILES += arch/x86/boot/fdimage \ - arch/x86/boot/image.iso \ - arch/x86/boot/mtools.conf diff --git a/arch/x86/Makefile_64 b/arch/x86/Makefile_64 deleted file mode 100644 index d35a0c50b67b..000000000000 --- a/arch/x86/Makefile_64 +++ /dev/null @@ -1,142 +0,0 @@ -# -# x86_64 Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Linus Torvalds -# -# 19990713 Artur Skawina <skawina@geocities.com> -# Added '-march' and '-mpreferred-stack-boundary' support -# 20000913 Pavel Machek <pavel@suse.cz> -# Converted for x86_64 architecture -# 20010105 Andi Kleen, add IA32 compiler. -# ....and later removed it again.... -# -# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $ - -# BITS is used as extension for files which are available in a 32 bit -# and a 64 bit version to simplify shared Makefiles. -# e.g.: obj-y += foo_$(BITS).o -BITS := 64 -export BITS - -LDFLAGS := -m elf_x86_64 -OBJCOPYFLAGS := -O binary -R .note -R .comment -S -LDFLAGS_vmlinux := -CHECKFLAGS += -D__x86_64__ -m64 - -cflags-y := -cflags-kernel-y := -cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8) -cflags-$(CONFIG_MPSC) += $(call cc-option,-march=nocona) -# gcc doesn't support -march=core2 yet as of gcc 4.3, but I hope it -# will eventually. Use -mtune=generic as fallback -cflags-$(CONFIG_MCORE2) += \ - $(call cc-option,-march=core2,$(call cc-option,-mtune=generic)) -cflags-$(CONFIG_GENERIC_CPU) += $(call cc-option,-mtune=generic) - -cflags-y += -m64 -cflags-y += -mno-red-zone -cflags-y += -mcmodel=kernel -cflags-y += -pipe -cflags-y += -Wno-sign-compare -cflags-y += -fno-asynchronous-unwind-tables -ifneq ($(CONFIG_DEBUG_INFO),y) -# -fweb shrinks the kernel a bit, but the difference is very small -# it also messes up debugging, so don't use it for now. -#cflags-y += $(call cc-option,-fweb) -endif -# -funit-at-a-time shrinks the kernel .text considerably -# unfortunately it makes reading oopses harder. -cflags-y += $(call cc-option,-funit-at-a-time) -# prevent gcc from generating any FP code by mistake -cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) -# this works around some issues with generating unwind tables in older gccs -# newer gccs do it by default -cflags-y += -maccumulate-outgoing-args - -# do binutils support CFI? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_rel_offset rsp${comma}0\n.cfi_endproc,-DCONFIG_AS_CFI=1,) - -# is .cfi_signal_frame supported too? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) -KBUILD_AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) - -cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector ) -cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all ) - -KBUILD_CFLAGS += $(cflags-y) -CFLAGS_KERNEL += $(cflags-kernel-y) -KBUILD_AFLAGS += -m64 - -head-y := arch/x86/kernel/head_64.o arch/x86/kernel/head64.o arch/x86/kernel/init_task.o - -libs-y += arch/x86/lib/ -core-y += arch/x86/kernel/ \ - arch/x86/mm/ \ - arch/x86/crypto/ \ - arch/x86/vdso/ -core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/ -drivers-$(CONFIG_PCI) += arch/x86/pci/ -drivers-$(CONFIG_OPROFILE) += arch/x86/oprofile/ - -boot := arch/x86/boot - -PHONY += bzImage bzlilo install archmrproper \ - fdimage fdimage144 fdimage288 isoimage archclean - -#Default target when executing "make" -all: bzImage - -BOOTIMAGE := arch/x86/boot/bzImage -KBUILD_IMAGE := $(BOOTIMAGE) - -bzImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE) - $(Q)mkdir -p $(objtree)/arch/x86_64/boot - $(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/x86_64/boot/bzImage - -bzlilo: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zlilo - -bzdisk: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) zdisk - -fdimage fdimage144 fdimage288 isoimage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ - -install: vdso_install - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(BOOTIMAGE) $@ - -vdso_install: - $(Q)$(MAKE) $(build)=arch/x86/vdso $@ - -archclean: - $(Q)rm -rf $(objtree)/arch/i386 - $(Q)rm -rf $(objtree)/arch/x86_64 - $(Q)$(MAKE) $(clean)=$(boot) - -define archhelp - echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)' - echo ' install - Install kernel using' - echo ' (your) ~/bin/installkernel or' - echo ' (distribution) /sbin/installkernel or' - echo ' install to $$(INSTALL_PATH) and run lilo' - echo ' bzdisk - Create a boot floppy in /dev/fd0' - echo ' fdimage - Create a boot floppy image' - echo ' isoimage - Create a boot CD-ROM image' -endef - -CLEAN_FILES += arch/x86/boot/fdimage \ - arch/x86/boot/image.iso \ - arch/x86/boot/mtools.conf - - |