diff options
| -rw-r--r-- | arch/x86_64/Kconfig | 30 | ||||
| -rw-r--r-- | arch/x86_64/Kconfig.debug | 2 | ||||
| -rw-r--r-- | arch/x86_64/kernel/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86_64/kernel/io_apic.c | 2 | ||||
| -rw-r--r-- | arch/x86_64/kernel/pci-dma.c | 2 | ||||
| -rw-r--r-- | arch/x86_64/kernel/setup.c | 2 | ||||
| -rw-r--r-- | drivers/char/agp/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/char/agp/amd64-agp.c | 4 | ||||
| -rw-r--r-- | drivers/scsi/aacraid/comminit.c | 5 | ||||
| -rw-r--r-- | include/asm-x86_64/pci.h | 2 | ||||
| -rw-r--r-- | include/asm-x86_64/proto.h | 2 |
11 files changed, 31 insertions, 26 deletions
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig index fc75275d8c72..e8c52a1eec06 100644 --- a/arch/x86_64/Kconfig +++ b/arch/x86_64/Kconfig @@ -386,24 +386,26 @@ config HPET_EMULATE_RTC bool "Provide RTC interrupt" depends on HPET_TIMER && RTC=y -config GART_IOMMU - bool "K8 GART IOMMU support" +# Mark as embedded because too many people got it wrong. +# The code disables itself when not needed. +config IOMMU + bool "IOMMU support" if EMBEDDED default y select SWIOTLB select AGP depends on PCI help - Support for hardware IOMMU in AMD's Opteron/Athlon64 Processors - and for the bounce buffering software IOMMU. - Needed to run systems with more than 3GB of memory properly with - 32-bit PCI devices that do not support DAC (Double Address Cycle). - The IOMMU can be turned off at runtime with the iommu=off parameter. - Normally the kernel will take the right choice by itself. - This option includes a driver for the AMD Opteron/Athlon64 IOMMU - northbridge and a software emulation used on other systems without - hardware IOMMU. If unsure, say Y. - -# need this always selected by GART_IOMMU for the VIA workaround + Support for full DMA access of devices with 32bit memory access only + on systems with more than 3GB. This is usually needed for USB, + sound, many IDE/SATA chipsets and some other devices. + Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART + based IOMMU and a software bounce buffer based IOMMU used on Intel + systems and as fallback. + The code is only active when needed (enough memory and limited + device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified + too. + +# need this always selected by IOMMU for the VIA workaround config SWIOTLB bool @@ -503,7 +505,7 @@ config REORDER config K8_NB def_bool y - depends on AGP_AMD64 || GART_IOMMU || (PCI && NUMA) + depends on AGP_AMD64 || IOMMU || (PCI && NUMA) endmenu diff --git a/arch/x86_64/Kconfig.debug b/arch/x86_64/Kconfig.debug index ea31b4c62105..0226f08be874 100644 --- a/arch/x86_64/Kconfig.debug +++ b/arch/x86_64/Kconfig.debug @@ -13,7 +13,7 @@ config DEBUG_RODATA If in doubt, say "N". config IOMMU_DEBUG - depends on GART_IOMMU && DEBUG_KERNEL + depends on IOMMU && DEBUG_KERNEL bool "Enable IOMMU debugging" help Force the IOMMU to on even when you have less than 4GB of diff --git a/arch/x86_64/kernel/Makefile b/arch/x86_64/kernel/Makefile index f927d11065fe..fd106bdddd6d 100644 --- a/arch/x86_64/kernel/Makefile +++ b/arch/x86_64/kernel/Makefile @@ -28,7 +28,7 @@ obj-$(CONFIG_PM) += suspend.o obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend_asm.o obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_GART_IOMMU) += pci-gart.o aperture.o +obj-$(CONFIG_IOMMU) += pci-gart.o aperture.o obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer.o diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 519cd4e6f9e7..c768d8a036d0 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -319,7 +319,7 @@ void __init check_ioapic(void) vendor &= 0xffff; switch (vendor) { case PCI_VENDOR_ID_VIA: -#ifdef CONFIG_GART_IOMMU +#ifdef CONFIG_IOMMU if ((end_pfn > MAX_DMA32_PFN || force_iommu) && !iommu_aperture_allowed) { diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c index 117bcebe9ebc..33926c367250 100644 --- a/arch/x86_64/kernel/pci-dma.c +++ b/arch/x86_64/kernel/pci-dma.c @@ -266,7 +266,7 @@ __init int iommu_setup(char *p) swiotlb = 1; #endif -#ifdef CONFIG_GART_IOMMU +#ifdef CONFIG_IOMMU gart_parse_options(p); #endif diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c index 9dadb9a1db2a..816203d57e11 100644 --- a/arch/x86_64/kernel/setup.c +++ b/arch/x86_64/kernel/setup.c @@ -702,7 +702,7 @@ void __init setup_arch(char **cmdline_p) e820_setup_gap(); -#ifdef CONFIG_GART_IOMMU +#ifdef CONFIG_IOMMU iommu_hole_init(); #endif diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index 46685a540772..9826a399fa02 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -55,9 +55,9 @@ config AGP_AMD X on AMD Irongate, 761, and 762 chipsets. config AGP_AMD64 - tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU + tristate "AMD Opteron/Athlon64 on-CPU GART support" if !IOMMU depends on AGP && X86 - default y if GART_IOMMU + default y if IOMMU help This option gives you AGP support for the GLX component of X using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 229d015757f9..f690ee8cb732 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -292,7 +292,7 @@ static int __devinit aperture_valid(u64 aper, u32 size) /* * W*s centric BIOS sometimes only set up the aperture in the AGP * bridge, not the northbridge. On AMD64 this is handled early - * in aperture.c, but when GART_IOMMU is not enabled or we run + * in aperture.c, but when IOMMU is not enabled or we run * on a 32bit kernel this needs to be redone. * Unfortunately it is impossible to fix the aperture here because it's too late * to allocate that much memory. But at least error out cleanly instead of @@ -775,7 +775,7 @@ static void __exit agp_amd64_cleanup(void) /* On AMD64 the PCI driver needs to initialize this driver early for the IOMMU, so it has to be called via a backdoor. */ -#ifndef CONFIG_GART_IOMMU +#ifndef CONFIG_IOMMU module_init(agp_amd64_init); module_exit(agp_amd64_cleanup); #endif diff --git a/drivers/scsi/aacraid/comminit.c b/drivers/scsi/aacraid/comminit.c index 35b0a6ebd3f5..7cea514e810a 100644 --- a/drivers/scsi/aacraid/comminit.c +++ b/drivers/scsi/aacraid/comminit.c @@ -104,8 +104,11 @@ static int aac_alloc_comm(struct aac_dev *dev, void **commaddr, unsigned long co * always true on real computers. It also has some slight problems * with the GART on x86-64. I've btw never tried DMA from PCI space * on this platform but don't be surprised if its problematic. + * [AK: something is very very wrong when a driver tests this symbol. + * Someone should figure out what the comment writer really meant here and fix + * the code. Or just remove that bad code. ] */ -#ifndef CONFIG_GART_IOMMU +#ifndef CONFIG_IOMMU if ((num_physpages << (PAGE_SHIFT - 12)) <= AAC_MAX_HOSTPHYSMEMPAGES) { init->HostPhysMemPages = cpu_to_le32(num_physpages << (PAGE_SHIFT-12)); diff --git a/include/asm-x86_64/pci.h b/include/asm-x86_64/pci.h index 2db0620d5449..3374d34c4acd 100644 --- a/include/asm-x86_64/pci.h +++ b/include/asm-x86_64/pci.h @@ -52,7 +52,7 @@ extern int iommu_setup(char *opt); */ #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys) -#ifdef CONFIG_GART_IOMMU +#ifdef CONFIG_IOMMU /* * x86-64 always supports DAC, but sometimes it is useful to force diff --git a/include/asm-x86_64/proto.h b/include/asm-x86_64/proto.h index 8abf2a43c944..1064533e0959 100644 --- a/include/asm-x86_64/proto.h +++ b/include/asm-x86_64/proto.h @@ -116,7 +116,7 @@ extern int skip_ioapic_setup; extern int acpi_ht; extern int acpi_disabled; -#ifdef CONFIG_GART_IOMMU +#ifdef CONFIG_IOMMU extern int fallback_aper_order; extern int fallback_aper_force; extern int iommu_aperture; |