// SPDX-License-Identifier: GPL-2.0-only /* * RT-Mutexes: simple blocking mutual exclusion locks with PI support * * started by Ingo Molnar and Thomas Gleixner. * * Copyright (C) 2004-2006 Red Hat, Inc., Ingo Molnar * Copyright (C) 2005-2006 Timesys Corp., Thomas Gleixner * Copyright (C) 2005 Kihon Technologies Inc., Steven Rostedt * Copyright (C) 2006 Esben Nielsen * Adaptive Spinlocks: * Copyright (C) 2008 Novell, Inc., Gregory Haskins, Sven Dietrich, * and Peter Morreale, * Adaptive Spinlocks simplification: * Copyright (C) 2008 Red Hat, Inc., Steven Rostedt * * See Documentation/locking/rt-mutex-design.rst for details. */ #include #include #include #include #include #include #include #include #include "rtmutex_common.h" #ifndef WW_RT # define build_ww_mutex() (false) # define ww_container_of(rtm) NULL static inline int __ww_mutex_add_waiter(struct rt_mutex_waiter *waiter, struct rt_mutex *lock, struct ww_acquire_ctx *ww_ctx) { return 0; } static inline void __ww_mutex_check_waiters(struct rt_mutex *lock, struct ww_acquire_ctx *ww_ctx) { } static inline void ww_mutex_lock_acquired(struct ww_mutex *lock, struct ww_acquire_ctx *ww_ctx) { } static inline int __ww_mutex_check_kill(struct rt_mutex *lock, struct rt_mutex_waiter *waiter, struct ww_acquire_ctx *ww_ctx) { return 0; } #else # define build_ww_mutex() (true) # define ww_container_of(rtm) container_of(rtm, struct ww_mutex, base) # include "ww_mutex.h" #endif /* * lock->owner state tracking: * * lock->owner holds the task_struct pointer of the owner. Bit 0 * is used to keep track of the "lock has waiters" state. * * owner bit0 * NULL 0 lock is free (fast acquire possible) * NULL 1 lock is free and has waiters and the top waiter * is going to take the lock* * taskpointer 0 lock is held (fast release possible) * taskpointer 1 lock is held and has waiters** * * The fast atomic compare exchange based acquire and release is only * possible when bit 0 of lock->owner is 0. * * (*) It also can be a transitional state when grabbing the lock * with ->wait_lock is held. To prevent any fast path cmpxchg to the lock, * we need to set the bit0 before looking at the lock, and the owner may be * NULL in this small time, hence this can be a transitional state. * * (**) There is a small time when bit 0 is set but there are no * waiters. This can happen when grabbing the lock in the slow path. * To prevent a cmpxchg of the owner releasing the lock, we need to * set this bit before looking at the lock. */ static __always_inline struct task_struct * rt_mutex_owner_encode(struct rt_mutex_base *lock, struct task_struct *owner) { unsigned long val = (unsigned long)owner; if (rt_mutex_has_waiters(lock)) val |= RT_MUTEX_HAS_WAITERS; return (struct task_struct *)val; } static __always_inline void rt_mutex_set_owner(struct rt_mutex_base *lock, struct task_struct *owner) { /* * lock->wait_lock is held but explicit acquire semantics are needed * for a new lock owner so WRITE_ONCE is insufficient. */ xchg_acquire(&lock->owner, rt_mutex_owner_encode(lock, owner)); } static __always_inline void rt_mutex_clear_owner(struct rt_mutex_base *lock) { /* lock->wait_lock is held so the unlock provides release semantics. */ WRITE_ONCE(lock->owner, rt_mutex_owner_encode(lock, NULL)); } static __always_inline void clear_rt_mutex_waiters(struct rt_mutex_base *lock) { lock->owner = (struct task_struct *) ((unsigned long)lock->owner & ~RT_MUTEX_HAS_WAITERS); } static __always_inline void fixup_rt_mutex_waiters(struct rt_mutex_base *lock, bool acquire_lock) { unsigned long owner, *p = (unsigned long *) &lock->owner; if (rt_mutex_has_waiters(lock)) return; /* * The rbtree has no waiters enqueued, now make sure that the * lock->owner still has the waiters bit set, otherwise the * following can happen: * * CPU 0 CPU 1 CPU2 * l->owner=T1 * rt_mutex_lock(l) * lock(l->lock) * l->owner = T1 | HAS_WAITERS; * enqueue(T2) * boost() * unlock(l->lock) * block() * * rt_mutex_lock(l) * lock(l->lock) * l->owner = T1 | HAS_WAITERS; * enqueue(T3) * boost() * unlock(l->lock) * block() * signal(->T2) signal(->T3) * lock(l->lock) * dequeue(T2) * deboost() * unlock(l->lock) * lock(l->lock) * dequeue(T3) * ==> wait list is empty * deboost() * unlock(l->lock) * lock(l->lock) * fixup_rt_mutex_waiters() * if (wait_list_empty(l) { * l->owner = owner * owner = l->owner & ~HAS_WAITERS; * ==> l->owner = T1 * } * lock(l->lock) * rt_mutex_unlock(l) fixup_rt_mutex_waiters() * if (wait_list_empty(l) { * owner = l->owner & ~HAS_WAITERS; * cmpxchg(l->owner, T1, NULL) * ===> Success (l->owner = NULL) * * l->owner = owner * ==> l->owner = T1 * } * * With the check for the waiter bit in place T3 on CPU2 will not * overwrite. All tasks fiddling with the waiters bit are * serialized by l->lock, so nothing else can modify the waiters * bit. If the bit is set then nothing can change l->owner either * so the simple RMW is safe. The cmpxchg() will simply fail if it * happens in the middle of the RMW because the waiters bit is * still set. */ owner = READ_ONCE(*p); if (owner & RT_MUTEX_HAS_WAITERS) { /* * See rt_mutex_set_owner() and rt_mutex_clear_owner() on * why xchg_acquire() is used for updating owner for * locking and WRITE_ONCE() for unlocking. * * WRITE_ONCE() would work for the acquire case too, but * in case that the lock acquisition failed it might * force other lockers into the slow path unnecessarily. */ if (acquire_lock) xchg_acquire(p, owner & ~RT_MUTEX_HAS_WAITERS); else WRITE_ONCE(*p, owner & ~RT_MUTEX_HAS_WAITERS); } } /* * We can speed up the acquire/release, if there's no debugging state to be * set up. */ #ifndef CONFIG_DEBUG_RT_MUTEXES static __always_inline bool rt_mutex_cmpxchg_acquire(struct rt_mutex_base *lock, struct task_struct *old, struct task_struct *new) { return try_cmpxchg_acquire(&lock->owner, &old, new); } static __always_inline bool rt_mutex_try_acquire(struct rt_mutex_base *lock) { return rt_mutex_cmpxchg_acquire(lock, NULL, current); } static __always_inline bool rt_mutex_cmpxchg_release(struct rt_mutex_base *lock, struct task_struct *old, struct task_struct *new) { return try_cmpxchg_release(&lock->owner, &old, new); } /* * Callers must hold the ->wait_lock -- which is the whole purpose as we force * all future threads that attempt to [Rmw] the lock to the slowpath. As such * relaxed semantics suffice. */ static __always_inline void mark_rt_mutex_waiters(struct rt_mutex_base *lock) { unsigned long *p = (unsigned long *) &lock->owner; unsigned long owner, new; owner = READ_ONCE(*p); do { new = owner | RT_MUTEX_HAS_WAITERS; } while (!try_cmpxchg_relaxed(p, &owner, new)); /* * The cmpxchg loop above is relaxed to avoid back-to-back ACQUIRE * operations in the event of contention. Ensure the successful * cmpxchg is visible. */ smp_mb__after_atomic(); } /* * Safe fastpath aware unlock: * 1) Clear the waiters bit * 2) Drop lock->wait_lock * 3) Try to unlock the lock with cmpxchg */ static __always_inline bool unlock_rt_mutex_safe(struct rt_mutex_base *lock, unsigned long flags) __releases(lock->wait_lock) { struct task_struct *owner = rt_mutex_owner(lock); clear_rt_mutex_waiters(lock); raw_spin_unlock_irqrestore(&lock->wait_lock, flags); /* * If a new waiter comes in between the unlock and the cmpxchg * we have two situations: * * unlock(wait_lock); * lock(wait_lock); * cmpxchg(p, owner, 0) == owner * mark_rt_mutex_waiters(lock); * acquire(lock); * or: * * unlock(wait_lock); * lock(wait_lock); * mark_rt_mutex_waiters(lock); * * cmpxchg(p, owner, 0) != owner * enqueue_waiter(); * unlock(wait_lock); * lock(wait_lock); * wake waiter(); * unlock(wait_lock); * lock(wait_lock); * acquire(lock); */ return rt_mutex_cmpxchg_release(lock, owner, NULL); } #else static __always_inline bool rt_mutex_cmpxchg_acquire(struct rt_mutex_base *lock, struct task_struct *old, struct task_struct *new) { return false; } static int __sched rt_mutex_slowtrylock(struct rt_mutex_base *lock); static __always_inline bool rt_mutex_try_acquire(struct rt_mutex_base *lock) { /* * With debug enabled rt_mutex_cmpxchg trylock() will always fail. * * Avoid unconditionally taking the slow path by using * rt_mutex_slow_trylock() which is covered by the debug code and can * acquire a non-contended rtmutex. */ return rt_mutex_slowtrylock(lock); } static __always_inline bool rt_mutex_cmpxchg_release(struct rt_mutex_base *lock, struct task_struct *old, struct task_struct *new) { return false; } static __always_inline void mark_rt_mutex_waiters(struct rt_mutex_base *lock) { lock->owner = (struct task_struct *) ((unsigned long)lock->owner | RT_MUTEX_HAS_WAITERS); } /* * Simple slow path only version: lock->owner is protected by lock->wait_lock. */ static __always_inline bool unlock_rt_mutex_safe(struct rt_mutex_base *lock, unsigned long flags) __releases(lock->wait_lock) { lock->owner = NULL; raw_spin_unlock_irqrestore(&lock->wait_lock, flags); return true; } #endif static __always_inline int __waiter_prio(struct task_struct *task) { int prio = task->prio; if (!rt_or_dl_prio(prio)) return DEFAULT_PRIO; return prio; } /* * Update the waiter->tree copy of the sort keys. */ static __always_inline void waiter_update_prio(struct rt_mutex_waiter *waiter, struct task_struct *task) { lockdep_assert_held(&waiter->lock->wait_lock); lockdep_assert(RB_EMPTY_NODE(&waiter->tree.entry)); waiter->tree.prio = __waiter_prio(task); waiter->tree.deadline = task->dl.deadline; } /* * Update the waiter->pi_tree copy of the sort keys (from the tree copy). */ static __always_inline void waiter_clone_prio(struct rt_mutex_waiter *waiter, struct task_struct *task) { lockdep_assert_held(&waiter->lock->wait_lock); lockdep_assert_held(&task->pi_lock); lockdep_assert(RB_EMPTY_NODE(&waiter->pi_tree.entry)); waiter->pi_tree.prio = waiter->tree.prio; waiter->pi_tree.deadline = waiter->tree.deadline; } /* * Only use with rt_waiter_node_{less,equal}() */ #define task_to_waiter_node(p) \ &(struct rt_waiter_node){ .prio = __waiter_prio(p), .deadline = (p)->dl.deadline } #define task_to_waiter(p) \ &(struct rt_mutex_waiter){ .tree = *task_to_waiter_node(p) } static __always_inline int rt_waiter_node_less(struct rt_waiter_node *left, struct rt_waiter_node *right) { if (left->prio < right->prio) return 1; /* * If both waiters have dl_prio(), we check the deadlines of the * associated tasks. * If left waiter has a dl_prio(), and we didn't return 1 above, * then right waiter has a dl_prio() too. */ if (dl_prio(left->prio)) return dl_time_before(left->deadline, right->deadline); return 0; } static __always_inline int rt_waiter_node_equal(struct rt_waiter_node *left, struct rt_waiter_node *right) { if (left->prio != right->prio) return 0; /* * If both waiters have dl_prio(), we check the deadlines of the * associated tasks. * If left waiter has a dl_prio(), and we didn't return 0 above, * then right waiter has a dl_prio() too. */ if (dl_prio(left->prio)) return left->deadline == right->deadline; return 1; } static inline bool rt_mutex_steal(struct rt_mutex_waiter *waiter, struct rt_mutex_waiter *top_waiter) { if (rt_waiter_node_less(&waiter->tree, &top_waiter->tree)) return true; #ifdef RT_MUTEX_BUILD_SPINLOCKS /* * Note that RT tasks are excluded from same priority (lateral) * steals to prevent the introduction of an unbounded latency. */ if (rt_or_dl_prio(waiter->tree.prio)) return false; return rt_waiter_node_equal(&waiter->tree, &top_waiter->tree); #else return false; #endif } #define __node_2_waiter(node) \ rb_entry((node), struct rt_mutex_waiter, tree.entry) static __always_inline bool __waiter_less(struct rb_node *a, const struct rb_node *b) { struct rt_mutex_waiter *aw = __node_2_waiter(a); struct rt_mutex_waiter *bw = __node_2_waiter(b); if (rt_waiter_node_less(&aw->tree, &bw->tree)) return 1; if (!build_ww_mutex()) return 0; if (rt_waiter_node_less(&bw->tree, &aw->tree)) return 0; /* NOTE: relies on waiter->ww_ctx being set before insertion */ if (aw->ww_ctx) { if (!bw->ww_ctx) return 1; return (signed long)(aw->ww_ctx->stamp - bw->ww_ctx->stamp) < 0; } return 0; } static __always_inline void rt_mutex_enqueue(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter) { lockdep_assert_held(&lock->wait_lock); rb_add_cached(&waiter->tree.entry, &lock->waiters, __waiter_less); } static __always_inline void rt_mutex_dequeue(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter) { lockdep_assert_held(&lock->wait_lock); if (RB_EMPTY_NODE(&waiter->tree.entry)) return; rb_erase_cached(&waiter->tree.entry, &lock->waiters); RB_CLEAR_NODE(&waiter->tree.entry); } #define __node_2_rt_node(node) \ rb_entry((node), struct rt_waiter_node, entry) static __always_inline bool __pi_waiter_less(struct rb_node *a, const struct rb_node *b) { return rt_waiter_node_less(__node_2_rt_node(a), __node_2_rt_node(b)); } static __always_inline void rt_mutex_enqueue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter) { lockdep_assert_held(&task->pi_lock); rb_add_cached(&waiter->pi_tree.entry, &task->pi_waiters, __pi_waiter_less); } static __always_inline void rt_mutex_dequeue_pi(struct task_struct *task, struct rt_mutex_waiter *waiter) { lockdep_assert_held(&task->pi_lock); if (RB_EMPTY_NODE(&waiter->pi_tree.entry)) return; rb_erase_cached(&waiter->pi_tree.entry, &task->pi_waiters); RB_CLEAR_NODE(&waiter->pi_tree.entry); } static __always_inline void rt_mutex_adjust_prio(struct rt_mutex_base *lock, struct task_struct *p) { struct task_struct *pi_task = NULL; lockdep_assert_held(&lock->wait_lock); lockdep_assert(rt_mutex_owner(lock) == p); lockdep_assert_held(&p->pi_lock); if (task_has_pi_waiters(p)) pi_task = task_top_pi_waiter(p)->task; rt_mutex_setprio(p, pi_task); } /* RT mutex specific wake_q wrappers */ static __always_inline void rt_mutex_wake_q_add_task(struct rt_wake_q_head *wqh, struct task_struct *task, unsigned int wake_state) { if (IS_ENABLED(CONFIG_PREEMPT_RT) && wake_state == TASK_RTLOCK_WAIT) { if (IS_ENABLED(CONFIG_PROVE_LOCKING)) WARN_ON_ONCE(wqh->rtlock_task); get_task_struct(task); wqh->rtlock_task = task; } else { wake_q_add(&wqh->head, task); } } static __always_inline void rt_mutex_wake_q_add(struct rt_wake_q_head *wqh, struct rt_mutex_waiter *w) { rt_mutex_wake_q_add_task(wqh, w->task, w->wake_state); } static __always_inline void rt_mutex_wake_up_q(struct rt_wake_q_head *wqh) { if (IS_ENABLED(CONFIG_PREEMPT_RT) && wqh->rtlock_task) { wake_up_state(wqh->rtlock_task, TASK_RTLOCK_WAIT); put_task_struct(wqh->rtlock_task); wqh->rtlock_task = NULL; } if (!wake_q_empty(&wqh->head)) wake_up_q(&wqh->head); /* Pairs with preempt_disable() in mark_wakeup_next_waiter() */ preempt_enable(); } /* * Deadlock detection is conditional: * * If CONFIG_DEBUG_RT_MUTEXES=n, deadlock detection is only conducted * if the detect argument is == RT_MUTEX_FULL_CHAINWALK. * * If CONFIG_DEBUG_RT_MUTEXES=y, deadlock detection is always * conducted independent of the detect argument. * * If the waiter argument is NULL this indicates the deboost path and * deadlock detection is disabled independent of the detect argument * and the config settings. */ static __always_inline bool rt_mutex_cond_detect_deadlock(struct rt_mutex_waiter *waiter, enum rtmutex_chainwalk chwalk) { if (IS_ENABLED(CONFIG_DEBUG_RT_MUTEXES)) return waiter != NULL; return chwalk == RT_MUTEX_FULL_CHAINWALK; } static __always_inline struct rt_mutex_base *task_blocked_on_lock(struct task_struct *p) { return p->pi_blocked_on ? p->pi_blocked_on->lock : NULL; } /* * Adjust the priority chain. Also used for deadlock detection. * Decreases task's usage by one - may thus free the task. * * @task: the task owning the mutex (owner) for which a chain walk is * probably needed * @chwalk: do we have to carry out deadlock detection? * @orig_lock: the mutex (can be NULL if we are walking the chain to recheck * things for a task that has just got its priority adjusted, and * is waiting on a mutex) * @next_lock: the mutex on which the owner of @orig_lock was blocked before * we dropped its pi_lock. Is never dereferenced, only used for * comparison to detect lock chain changes. * @orig_waiter: rt_mutex_waiter struct for the task that has just donated * its priority to the mutex owner (can be NULL in the case * depicted above or if the top waiter is gone away and we are * actually deboosting the owner) * @top_task: the current top waiter * * Returns 0 or -EDEADLK. * * Chain walk basics and protection scope * * [R] refcount on task * [Pn] task->pi_lock held * [L] rtmutex->wait_lock held * * Normal locking order: * * rtmutex->wait_lock * task->pi_lock * * Step Description Protected by * function arguments: * @task [R] * @orig_lock if != NULL @top_task is blocked on it * @next_lock Unprotected. Cannot be * dereferenced. Only used for * comparison. * @orig_waiter if != NULL @top_task is blocked on it * @top_task current, or in case of proxy * locking protected by calling * code * again: * loop_sanity_check(); * retry: * [1] lock(task->pi_lock); [R] acquire [P1] * [2] waiter = task->pi_blocked_on; [P1] * [3] check_exit_conditions_1(); [P1] * [4] lock = waiter->lock; [P1] * [5] if (!try_lock(lock->wait_lock)) { [P1] try to acquire [L] * unlock(task->pi_lock); release [P1] * goto retry; * } * [6] check_exit_conditions_2(); [P1] + [L] * [7] requeue_lock_waiter(lock, waiter); [P1] + [L] * [8] unlock(task->pi_lock); release [P1] * put_task_struct(task); release [R] * [9] check_exit_conditions_3(); [L] * [10] task = owner(lock); [L] * get_task_struct(task); [L] acquire [R] * lock(task->pi_lock); [L] acquire [P2] * [11] requeue_pi_waiter(tsk, waiters(lock));[P2] + [L] * [12] check_exit_conditions_4(); [P2] + [L] * [13] unlock(task->pi_lock); release [P2] * unlock(lock->wait_lock); release [L] * goto again; * * Where P1 is the blocking task and P2 is the lock owner; going up one step * the owner becomes the next blocked task etc.. * * */ static int __sched rt_mutex_adjust_prio_chain(struct task_struct *task, enum rtmutex_chainwalk chwalk, struct rt_mutex_base *orig_lock, struct rt_mutex_base *next_lock, struct rt_mutex_waiter *orig_waiter, struct task_struct *top_task) { struct rt_mutex_waiter *waiter, *top_waiter = orig_waiter; struct rt_mutex_waiter *prerequeue_top_waiter; int ret = 0, depth = 0; struct rt_mutex_base *lock; bool detect_deadlock; bool requeue = true; detect_deadlock = rt_mutex_cond_detect_deadlock(orig_waiter, chwalk); /* * The (de)boosting is a step by step approach with a lot of * pitfalls. We want this to be preemptible and we want hold a * maximum of two locks per step. So we have to check * carefully whether things change under us. */ again: /* * We limit the lock chain length for each invocation. */ if (++depth > max_lock_depth) { static int prev_max; /* * Print this only once. If the admin changes the limit, * print a new message when reaching the limit again. */ if (prev_max != max_lock_depth) { prev_max = max_lock_depth; printk(KERN_WARNING "Maximum lock depth %d reached " "task: %s (%d)\n", max_lock_depth, top_task->comm, task_pid_nr(top_task)); } put_task_struct(task); return -EDEADLK; } /* * We are fully preemptible here and only hold the refcount on * @task. So everything can have changed under us since the * caller or our own code below (goto retry/again) dropped all * locks. */ retry: /* * [1] Task cannot go away as we did a get_task() before ! */ raw_spin_lock_irq(&task->pi_lock); /* * [2] Get the waiter on which @task is blocked on. */ waiter = task->pi_blocked_on; /* * [3] check_exit_conditions_1() protected by task->pi_lock. */ /* * Check whether the end of the boosting chain has been * reached or the state of the chain has changed while we * dropped the locks. */ if (!waiter) goto out_unlock_pi; /* * Check the orig_waiter state. After we dropped the locks, * the previous owner of the lock might have released the lock. */ if (orig_waiter && !rt_mutex_owner(orig_lock)) goto out_unlock_pi; /* * We dropped all locks after taking a refcount on @task, so * the task might have moved on in the lock chain or even left * the chain completely and blocks now on an unrelated lock or * on @orig_lock. * * We stored the lock on which @task was blocked in @next_lock, * so we can detect the chain change. */ if (next_lock != waiter->lock) goto out_unlock_pi; /* * There could be 'spurious' loops in the lock graph due to ww_mutex, * consider: * * P1: A, ww_A, ww_B * P2: ww_B, ww_A * P3: A * * P3 should not return -EDEADLK because it gets trapped in the cycle * created by P1 and P2 (which will resolve -- and runs into * max_lock_depth above). Therefore disable detect_deadlock such that * the below termination condition can trigger once all relevant tasks * are boosted. * * Even when we start with ww_mutex we can disable deadlock detection, * since we would supress a ww_mutex induced deadlock at [6] anyway. * Supressing it here however is not sufficient since we might still * hit [6] due to adjustment driven iteration. * * NOTE: if someone were to create a deadlock between 2 ww_classes we'd * utterly fail to report it; lockdep should. */ if (IS_ENABLED(CONFIG_PREEMPT_RT) && waiter->ww_ctx && detect_deadlock) detect_deadlock = false; /* * Drop out, when the task has no waiters. Note, * top_waiter can be NULL, when we are in the deboosting * mode! */ if (top_waiter) { if (!task_has_pi_waiters(task)) goto out_unlock_pi; /* * If deadlock detection is off, we stop here if we * are not the top pi waiter of the task. If deadlock * detection is enabled we continue, but stop the * requeueing in the chain walk. */ if (top_waiter != task_top_pi_waiter(task)) { if (!detect_deadlock) goto out_unlock_pi; else requeue = false; } } /* * If the waiter priority is the same as the task priority * then there is no further priority adjustment necessary. If * deadlock detection is off, we stop the chain walk. If its * enabled we continue, but stop the requeueing in the chain * walk. */ if (rt_waiter_node_equal(&waiter->tree, task_to_waiter_node(task))) { if (!detect_deadlock) goto out_unlock_pi; else requeue = false; } /* * [4] Get the next lock; per holding task->pi_lock we can't unblock * and guarantee @lock's existence. */ lock = waiter->lock; /* * [5] We need to trylock here as we are holding task->pi_lock, * which is the reverse lock order versus the other rtmutex * operations. * * Per the above, holding task->pi_lock guarantees lock exists, so * inverting this lock order is infeasible from a life-time * perspective. */ if (!raw_spin_trylock(&lock->wait_lock)) { raw_spin_unlock_irq(&task->pi_lock); cpu_relax(); goto retry; } /* * [6] check_exit_conditions_2() protected by task->pi_lock and * lock->wait_lock. * * Deadlock detection. If the lock is the same as the original * lock which caused us to walk the lock chain or if the * current lock is owned by the task which initiated the chain * walk, we detected a deadlock. */ if (lock == orig_lock || rt_mutex_owner(lock) == top_task) { ret = -EDEADLK; /* * When the deadlock is due to ww_mutex; also see above. Don't * report the deadlock and instead let the ww_mutex wound/die * logic pick which of the contending threads gets -EDEADLK. * * NOTE: assumes the cycle only contains a single ww_class; any * other configuration and we fail to report; also, see * lockdep. */ if (IS_ENABLED(CONFIG_PREEMPT_RT) && orig_waiter && orig_waiter->ww_ctx) ret = 0; raw_spin_unlock(&lock->wait_lock); goto out_unlock_pi; } /* * If we just follow the lock chain for deadlock detection, no * need to do all the requeue operations. To avoid a truckload * of conditionals around the various places below, just do the * minimum chain walk checks. */ if (!requeue) { /* * No requeue[7] here. Just release @task [8] */ raw_spin_unlock(&task->pi_lock); put_task_struct(task); /* * [9] check_exit_conditions_3 protected by lock->wait_lock. * If there is no owner of the lock, end of chain. */ if (!rt_mutex_owner(lock)) { raw_spin_unlock_irq(&lock->wait_lock); return 0; } /* [10] Grab the next task, i.e. owner of @lock */ task = get_task_struct(rt_mutex_owner(lock)); raw_spin_lock(&task->pi_lock); /* * No requeue [11] here. We just do deadlock detection. * * [12] Store whether owner is blocked * itself. Decision is made after dropping the locks */ next_lock = task_blocked_on_lock(task); /* * Get the top waiter for the next iteration */ top_waiter = rt_mutex_top_waiter(lock); /* [13] Drop locks */ raw_spin_unlock(&task->pi_lock); raw_spin_unlock_irq(&lock->wait_lock); /* If owner is not blocked, end of chain. */ if (!next_lock) goto out_put_task; goto again; } /* * Store the current top waiter before doing the requeue * operation on @lock. We need it for the boost/deboost * decision below. */ prerequeue_top_waiter = rt_mutex_top_waiter(lock); /* [7] Requeue the waiter in the lock waiter tree. */ rt_mutex_dequeue(lock, waiter); /* * Update the waiter prio fields now that we're dequeued. * * These values can have changed through either: * * sys_sched_set_scheduler() / sys_sched_setattr() * * or * * DL CBS enforcement advancing the effective deadline. */ waiter_update_prio(waiter, task); rt_mutex_enqueue(lock, waiter); /* * [8] Release the (blocking) task in preparation for * taking the owner task in [10]. * * Since we hold lock->waiter_lock, task cannot unblock, even if we * release task->pi_lock. */ raw_spin_unlock(&task->pi_lock); put_task_struct(task); /* * [9] check_exit_conditions_3 protected by lock->wait_lock. * * We must abort the chain walk if there is no lock owner even * in the dead lock detection case, as we have nothing to * follow here. This is the end of the chain we are walking. */ if (!rt_mutex_owner(lock)) { /* * If the requeue [7] above changed the top waiter, * then we need to wake the new top waiter up to try * to get the lock. */ top_waiter = rt_mutex_top_waiter(lock); if (prerequeue_top_waiter != top_waiter) wake_up_state(top_waiter->task, top_waiter->wake_state); raw_spin_unlock_irq(&lock->wait_lock); return 0; } /* * [10] Grab the next task, i.e. the owner of @lock * * Per holding lock->wait_lock and checking for !owner above, there * must be an owner and it cannot go away. */ task = get_task_struct(rt_mutex_owner(lock)); raw_spin_lock(&task->pi_lock); /* [11] requeue the pi waiters if necessary */ if (waiter == rt_mutex_top_waiter(lock)) { /* * The waiter became the new top (highest priority) * waiter on the lock. Replace the previous top waiter * in the owner tasks pi waiters tree with this waiter * and adjust the priority of the owner. */ rt_mutex_dequeue_pi(task, prerequeue_top_waiter); waiter_clone_prio(waiter, task); rt_mutex_enqueue_pi(task, waiter); rt_mutex_adjust_prio(lock, task); } else if (prerequeue_top_waiter == waiter) { /* * The waiter was the top waiter on the lock, but is * no longer the top priority waiter. Replace waiter in * the owner tasks pi waiters tree with the new top * (highest priority) waiter and adjust the priority * of the owner. * The new top waiter is stored in @waiter so that * @waiter == @top_waiter evaluates to true below and * we continue to deboost the rest of the chain. */ rt_mutex_dequeue_pi(task, waiter); waiter = rt_mutex_top_waiter(lock); waiter_clone_prio(waiter, task); rt_mutex_enqueue_pi(task, waiter); rt_mutex_adjust_prio(lock, task); } else { /* * Nothing changed. No need to do any priority * adjustment. */ } /* * [12] check_exit_conditions_4() protected by task->pi_lock * and lock->wait_lock. The actual decisions are made after we * dropped the locks. * * Check whether the task which owns the current lock is pi * blocked itself. If yes we store a pointer to the lock for * the lock chain change detection above. After we dropped * task->pi_lock next_lock cannot be dereferenced anymore. */ next_lock = task_blocked_on_lock(task); /* * Store the top waiter of @lock for the end of chain walk * decision below. */ top_waiter = rt_mutex_top_waiter(lock); /* [13] Drop the locks */ raw_spin_unlock(&task->pi_lock); raw_spin_unlock_irq(&lock->wait_lock); /* * Make the actual exit decisions [12], based on the stored * values. * * We reached the end of the lock chain. Stop right here. No * point to go back just to figure that out. */ if (!next_lock) goto out_put_task; /* * If the current waiter is not the top waiter on the lock, * then we can stop the chain walk here if we are not in full * deadlock detection mode. */ if (!detect_deadlock && waiter != top_waiter) goto out_put_task; goto again; out_unlock_pi: raw_spin_unlock_irq(&task->pi_lock); out_put_task: put_task_struct(task); return ret; } /* * Try to take an rt-mutex * * Must be called with lock->wait_lock held and interrupts disabled * * @lock: The lock to be acquired. * @task: The task which wants to acquire the lock * @waiter: The waiter that is queued to the lock's wait tree if the * callsite called task_blocked_on_lock(), otherwise NULL */ static int __sched try_to_take_rt_mutex(struct rt_mutex_base *lock, struct task_struct *task, struct rt_mutex_waiter *waiter) { lockdep_assert_held(&lock->wait_lock); /* * Before testing whether we can acquire @lock, we set the * RT_MUTEX_HAS_WAITERS bit in @lock->owner. This forces all * other tasks which try to modify @lock into the slow path * and they serialize on @lock->wait_lock. * * The RT_MUTEX_HAS_WAITERS bit can have a transitional state * as explained at the top of this file if and only if: * * - There is a lock owner. The caller must fixup the * transient state if it does a trylock or leaves the lock * function due to a signal or timeout. * * - @task acquires the lock and there are no other * waiters. This is undone in rt_mutex_set_owner(@task) at * the end of this function. */ mark_rt_mutex_waiters(lock); /* * If @lock has an owner, give up. */ if (rt_mutex_owner(lock)) return 0; /* * If @waiter != NULL, @task has already enqueued the waiter * into @lock waiter tree. If @waiter == NULL then this is a * trylock attempt. */ if (waiter) { struct rt_mutex_waiter *top_waiter = rt_mutex_top_waiter(lock); /* * If waiter is the highest priority waiter of @lock, * or allowed to steal it, take it over. */ if (waiter == top_waiter || rt_mutex_steal(waiter, top_waiter)) { /* * We can acquire the lock. Remove the waiter from the * lock waiters tree. */ rt_mutex_dequeue(lock, waiter); } else { return 0; } } else { /* * If the lock has waiters already we check whether @task is * eligible to take over the lock. * * If there are no other waiters, @task can acquire * the lock. @task->pi_blocked_on is NULL, so it does * not need to be dequeued. */ if (rt_mutex_has_waiters(lock)) { /* Check whether the trylock can steal it. */ if (!rt_mutex_steal(task_to_waiter(task), rt_mutex_top_waiter(lock))) return 0; /* * The current top waiter stays enqueued. We * don't have to change anything in the lock * waiters order. */ } else { /* * No waiters. Take the lock without the * pi_lock dance.@task->pi_blocked_on is NULL * and we have no waiters to enqueue in @task * pi waiters tree. */ goto takeit; } } /* * Clear @task->pi_blocked_on. Requires protection by * @task->pi_lock. Redundant operation for the @waiter == NULL * case, but conditionals are more expensive than a redundant * store. */ raw_spin_lock(&task->pi_lock); task->pi_blocked_on = NULL; /* * Finish the lock acquisition. @task is the new owner. If * other waiters exist we have to insert the highest priority * waiter into @task->pi_waiters tree. */ if (rt_mutex_has_waiters(lock)) rt_mutex_enqueue_pi(task, rt_mutex_top_waiter(lock)); raw_spin_unlock(&task->pi_lock); takeit: /* * This either preserves the RT_MUTEX_HAS_WAITERS bit if there * are still waiters or clears it. */ rt_mutex_set_owner(lock, task); return 1; } /* * Task blocks on lock. * * Prepare waiter and propagate pi chain * * This must be called with lock->wait_lock held and interrupts disabled */ static int __sched task_blocks_on_rt_mutex(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter, struct task_struct *task, struct ww_acquire_ctx *ww_ctx, enum rtmutex_chainwalk chwalk) { struct task_struct *owner = rt_mutex_owner(lock); struct rt_mutex_waiter *top_waiter = waiter; struct rt_mutex_base *next_lock; int chain_walk = 0, res; lockdep_assert_held(&lock->wait_lock); /* * Early deadlock detection. We really don't want the task to * enqueue on itself just to untangle the mess later. It's not * only an optimization. We drop the locks, so another waiter * can come in before the chain walk detects the deadlock. So * the other will detect the deadlock and return -EDEADLOCK, * which is wrong, as the other waiter is not in a deadlock * situation. * * Except for ww_mutex, in that case the chain walk must already deal * with spurious cycles, see the comments at [3] and [6]. */ if (owner == task && !(build_ww_mutex() && ww_ctx)) return -EDEADLK; raw_spin_lock(&task->pi_lock); waiter->task = task; waiter->lock = lock; waiter_update_prio(waiter, task); waiter_clone_prio(waiter, task); /* Get the top priority waiter on the lock */ if (rt_mutex_has_waiters(lock)) top_waiter = rt_mutex_top_waiter(lock); rt_mutex_enqueue(lock, waiter); task->pi_blocked_on = waiter; raw_spin_unlock(&task->pi_lock); if (build_ww_mutex() && ww_ctx) { struct rt_mutex *rtm; /* Check whether the waiter should back out immediately */ rtm = container_of(lock, struct rt_mutex, rtmutex); res = __ww_mutex_add_waiter(waiter, rtm, ww_ctx); if (res) { raw_spin_lock(&task->pi_lock); rt_mutex_dequeue(lock, waiter); task->pi_blocked_on = NULL; raw_spin_unlock(&task->pi_lock); return res; } } if (!owner) return 0; raw_spin_lock(&owner->pi_lock); if (waiter == rt_mutex_top_waiter(lock)) { rt_mutex_dequeue_pi(owner, top_waiter); rt_mutex_enqueue_pi(owner, waiter); rt_mutex_adjust_prio(lock, owner); if (owner->pi_blocked_on) chain_walk = 1; } else if (rt_mutex_cond_detect_deadlock(waiter, chwalk)) { chain_walk = 1; } /* Store the lock on which owner is blocked or NULL */ next_lock = task_blocked_on_lock(owner); raw_spin_unlock(&owner->pi_lock); /* * Even if full deadlock detection is on, if the owner is not * blocked itself, we can avoid finding this out in the chain * walk. */ if (!chain_walk || !next_lock) return 0; /* * The owner can't disappear while holding a lock, * so the owner struct is protected by wait_lock. * Gets dropped in rt_mutex_adjust_prio_chain()! */ get_task_struct(owner); raw_spin_unlock_irq(&lock->wait_lock); res = rt_mutex_adjust_prio_chain(owner, chwalk, lock, next_lock, waiter, task); raw_spin_lock_irq(&lock->wait_lock); return res; } /* * Remove the top waiter from the current tasks pi waiter tree and * queue it up. * * Called with lock->wait_lock held and interrupts disabled. */ static void __sched mark_wakeup_next_waiter(struct rt_wake_q_head *wqh, struct rt_mutex_base *lock) { struct rt_mutex_waiter *waiter; lockdep_assert_held(&lock->wait_lock); raw_spin_lock(¤t->pi_lock); waiter = rt_mutex_top_waiter(lock); /* * Remove it from current->pi_waiters and deboost. * * We must in fact deboost here in order to ensure we call * rt_mutex_setprio() to update p->pi_top_task before the * task unblocks. */ rt_mutex_dequeue_pi(current, waiter); rt_mutex_adjust_prio(lock, current); /* * As we are waking up the top waiter, and the waiter stays * queued on the lock until it gets the lock, this lock * obviously has waiters. Just set the bit here and this has * the added benefit of forcing all new tasks into the * slow path making sure no task of lower priority than * the top waiter can steal this lock. */ lock->owner = (void *) RT_MUTEX_HAS_WAITERS; /* * We deboosted before waking the top waiter task such that we don't * run two tasks with the 'same' priority (and ensure the * p->pi_top_task pointer points to a blocked task). This however can * lead to priority inversion if we would get preempted after the * deboost but before waking our donor task, hence the preempt_disable() * before unlock. * * Pairs with preempt_enable() in rt_mutex_wake_up_q(); */ preempt_disable(); rt_mutex_wake_q_add(wqh, waiter); raw_spin_unlock(¤t->pi_lock); } static int __sched __rt_mutex_slowtrylock(struct rt_mutex_base *lock) { int ret = try_to_take_rt_mutex(lock, current, NULL); /* * try_to_take_rt_mutex() sets the lock waiters bit * unconditionally. Clean this up. */ fixup_rt_mutex_waiters(lock, true); return ret; } /* * Slow path try-lock function: */ static int __sched rt_mutex_slowtrylock(struct rt_mutex_base *lock) { unsigned long flags; int ret; /* * If the lock already has an owner we fail to get the lock. * This can be done without taking the @lock->wait_lock as * it is only being read, and this is a trylock anyway. */ if (rt_mutex_owner(lock)) return 0; /* * The mutex has currently no owner. Lock the wait lock and try to * acquire the lock. We use irqsave here to support early boot calls. */ raw_spin_lock_irqsave(&lock->wait_lock, flags); ret = __rt_mutex_slowtrylock(lock); raw_spin_unlock_irqrestore(&lock->wait_lock, flags); return ret; } static __always_inline int __rt_mutex_trylock(struct rt_mutex_base *lock) { if (likely(rt_mutex_cmpxchg_acquire(lock, NULL, current))) return 1; return rt_mutex_slowtrylock(lock); } /* * Slow path to release a rt-mutex. */ static void __sched rt_mutex_slowunlock(struct rt_mutex_base *lock) { DEFINE_RT_WAKE_Q(wqh); unsigned long flags; /* irqsave required to support early boot calls */ raw_spin_lock_irqsave(&lock->wait_lock, flags); debug_rt_mutex_unlock(lock); /* * We must be careful here if the fast path is enabled. If we * have no waiters queued we cannot set owner to NULL here * because of: * * foo->lock->owner = NULL; * rtmutex_lock(foo->lock); <- fast path * free = atomic_dec_and_test(foo->refcnt); * rtmutex_unlock(foo->lock); <- fast path * if (free) * kfree(foo); * raw_spin_unlock(foo->lock->wait_lock); * * So for the fastpath enabled kernel: * * Nothing can set the waiters bit as long as we hold * lock->wait_lock. So we do the following sequence: * * owner = rt_mutex_owner(lock); * clear_rt_mutex_waiters(lock); * raw_spin_unlock(&lock->wait_lock); * if (cmpxchg(&lock->owner, owner, 0) == owner) * return; * goto retry; * * The fastpath disabled variant is simple as all access to * lock->owner is serialized by lock->wait_lock: * * lock->owner = NULL; * raw_spin_unlock(&lock->wait_lock); */ while (!rt_mutex_has_waiters(lock)) { /* Drops lock->wait_lock ! */ if (unlock_rt_mutex_safe(lock, flags) == true) return; /* Relock the rtmutex and try again */ raw_spin_lock_irqsave(&lock->wait_lock, flags); } /* * The wakeup next waiter path does not suffer from the above * race. See the comments there. * * Queue the next waiter for wakeup once we release the wait_lock. */ mark_wakeup_next_waiter(&wqh, lock); raw_spin_unlock_irqrestore(&lock->wait_lock, flags); rt_mutex_wake_up_q(&wqh); } static __always_inline void __rt_mutex_unlock(struct rt_mutex_base *lock) { if (likely(rt_mutex_cmpxchg_release(lock, current, NULL))) return; rt_mutex_slowunlock(lock); } #ifdef CONFIG_SMP static bool rtmutex_spin_on_owner(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter, struct task_struct *owner) { bool res = true; rcu_read_lock(); for (;;) { /* If owner changed, trylock again. */ if (owner != rt_mutex_owner(lock)) break; /* * Ensure that @owner is dereferenced after checking that * the lock owner still matches @owner. If that fails, * @owner might point to freed memory. If it still matches, * the rcu_read_lock() ensures the memory stays valid. */ barrier(); /* * Stop spinning when: * - the lock owner has been scheduled out * - current is not longer the top waiter * - current is requested to reschedule (redundant * for CONFIG_PREEMPT_RCU=y) * - the VCPU on which owner runs is preempted */ if (!owner_on_cpu(owner) || need_resched() || !rt_mutex_waiter_is_top_waiter(lock, waiter)) { res = false; break; } cpu_relax(); } rcu_read_unlock(); return res; } #else static bool rtmutex_spin_on_owner(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter, struct task_struct *owner) { return false; } #endif #ifdef RT_MUTEX_BUILD_MUTEX /* * Functions required for: * - rtmutex, futex on all kernels * - mutex and rwsem substitutions on RT kernels */ /* * Remove a waiter from a lock and give up * * Must be called with lock->wait_lock held and interrupts disabled. It must * have just failed to try_to_take_rt_mutex(). */ static void __sched remove_waiter(struct rt_mutex_base *lock, struct rt_mutex_waiter *waiter) { bool is_top_waiter = (waiter == rt_mutex_top_waiter(lock)); struct task_struct *owner = rt_mutex_owner(lock); struct rt_mutex_base *next_lock; lockdep_assert_held(&lock->wait_lock); raw_spin_lock(¤t->pi_lock); rt_mutex_dequeue(lock, waiter); current->pi_blocked_on = NULL; raw_spin_unlock(¤t->pi_lock); /* * Only update priority if the waiter was the highest priority * waiter of the lock and there is an owner to update. */ if (!owner || !is_top_waiter) return; raw_spin_lock(&owner->pi_lock); rt_mutex_dequeue_pi(owner, waiter); if (rt_mutex_has_waiters(lock)) rt_mutex_enqueue_pi(owner, rt_mutex_top_waiter(lock)); rt_mutex_adjust_prio(lock, owner); /* Store the lock on which owner is blocked or NULL */ next_lock = task_blocked_on_lock(owner); raw_spin_unlock(&owner->pi_lock); /* * Don't walk the chain, if the owner task is not blocked * itself. */ if (!next_lock) return; /* gets dropped in rt_mutex_adjust_prio_chain()! */ get_task_struct(owner); raw_spin_unlock_irq(&lock->wait_lock); rt_mutex_adjust_prio_chain(owner, RT_MUTEX_MIN_CHAINWALK, lock, next_lock, NULL, current); raw_spin_lock_irq(&lock->wait_lock); } /** * rt_mutex_slowlock_block() - Perform the wait-wake-try-to-take loop * @lock: the rt_mutex to take * @ww_ctx: WW mutex context pointer * @state: the state the task should block in (TASK_INTERRUPTIBLE * or TASK_UNINTERRUPTIBLE) * @timeout: the pre-initialized and started timer, or NULL for none * @waiter: the pre-initialized rt_mutex_waiter * * Must be called with lock->wait_lock held and interrupts disabled */ static int __sched rt_mutex_slowlock_block(struct rt_mutex_base *lock, struct ww_acquire_ctx *ww_ctx, unsigned int state, struct hrtimer_sleeper *timeout, struct rt_mutex_waiter *waiter) { struct rt_mutex *rtm = container_of(lock, struct rt_mutex, rtmutex); struct task_struct *owner; int ret = 0; for (;;) { /* Try to acquire the lock: */ if (try_to_take_rt_mutex(lock, current, waiter)) break; if (timeout && !timeout->task) { ret = -ETIMEDOUT; break; } if (signal_pending_state(state, current)) { ret = -EINTR; break; } if (build_ww_mutex() && ww_ctx) { ret = __ww_mutex_check_kill(rtm, waiter, ww_ctx); if (ret) break; } if (waiter == rt_mutex_top_waiter(lock)) owner = rt_mutex_owner(lock); else owner = NULL; raw_spin_unlock_irq(&lock->wait_lock); if (!owner || !rtmutex_spin_on_owner(lock, waiter, owner)) rt_mutex_schedule(); raw_spin_lock_irq(&lock->wait_lock); set_current_state(state); } __set_current_state(TASK_RUNNING); return ret; } static void __sched rt_mutex_handle_deadlock(int res, int detect_deadlock, struct rt_mutex_base *lock, struct rt_mutex_waiter *w) { /* * If the result is not -EDEADLOCK or the caller requested * deadlock detection, nothing to do here. */ if (res != -EDEADLOCK || detect_deadlock) return; if (build_ww_mutex() && w->ww_ctx) return; raw_spin_unlock_irq(&lock->wait_lock); WARN(1, "rtmutex deadlock detected\n"); while (1) { set_current_state(TASK_INTERRUPTIBLE); rt_mutex_schedule(); } } /** * __rt_mutex_slowlock - Locking slowpath invoked with lock::wait_lock held * @lock: The rtmutex to block lock * @ww_ctx: WW mutex context pointer * @state: The task state for sleeping * @chwalk: Indicator whether full or partial chainwalk is requested * @waiter: Initializer waiter for blocking */ static int __sched __rt_mutex_slowlock(struct rt_mutex_base *lock, struct ww_acquire_ctx *ww_ctx, unsigned int state, enum rtmutex_chainwalk chwalk, struct rt_mutex_waiter *waiter) { struct rt_mutex *rtm = container_of(lock, struct rt_mutex, rtmutex); struct ww_mutex *ww = ww_container_of(rtm); int ret; lockdep_assert_held(&lock->wait_lock); /* Try to acquire the lock again: */ if (try_to_take_rt_mutex(lock, current, NULL)) { if (build_ww_mutex() && ww_ctx) { __ww_mutex_check_waiters(rtm, ww_ctx); ww_mutex_lock_acquired(ww, ww_ctx); } return 0; } set_current_state(state); trace_contention_begin(lock, LCB_F_RT); ret = task_blocks_on_rt_mutex(lock, waiter, current, ww_ctx, chwalk); if (likely(!ret)) ret = rt_mutex_slowlock_block(lock, ww_ctx, state, NULL, waiter); if (likely(!ret)) { /* acquired the lock */ if (build_ww_mutex() && ww_ctx) { if (!ww_ctx->is_wait_die) __ww_mutex_check_waiters(rtm, ww_ctx); ww_mutex_lock_acquired(ww, ww_ctx); } } else { __set_current_state(TASK_RUNNING); remove_waiter(lock, waiter); rt_mutex_handle_deadlock(ret, chwalk, lock, waiter); } /* * try_to_take_rt_mutex() sets the waiter bit * unconditionally. We might have to fix that up. */ fixup_rt_mutex_waiters(lock, true); trace_contention_end(lock, ret); return ret; } static inline int __rt_mutex_slowlock_locked(struct rt_mutex_base *lock, struct ww_acquire_ctx *ww_ctx, unsigned int state) { struct rt_mutex_waiter waiter; int ret; rt_mutex_init_waiter(&waiter); waiter.ww_ctx = ww_ctx; ret = __rt_mutex_slowlock(lock, ww_ctx, state, RT_MUTEX_MIN_CHAINWALK, &waiter); debug_rt_mutex_free_waiter(&waiter); return ret; } /* * rt_mutex_slowlock - Locking slowpath invoked when fast path fails * @lock: The rtmutex to block lock * @ww_ctx: WW mutex context pointer * @state: The task state for sleeping */ static int __sched rt_mutex_slowlock(struct rt_mutex_base *lock, struct ww_acquire_ctx *ww_ctx, unsigned int state) { unsigned long flags; int ret; /* * Do all pre-schedule work here, before we queue a waiter and invoke * PI -- any such work that trips on rtlock (PREEMPT_RT spinlock) would * otherwise recurse back into task_blocks_on_rt_mutex() through * rtlock_slowlock() and will then enqueue a second waiter for this * same task and things get really confusing real fast. */ rt_mutex_pre_schedule(); /* * Technically we could use raw_spin_[un]lock_irq() here, but this can * be called in early boot if the cmpxchg() fast path is disabled * (debug, no architecture support). In this case we will acquire the * rtmutex with lock->wait_lock held. But we cannot unconditionally * enable interrupts in that early boot case. So we need to use the * irqsave/restore variants. */ raw_spin_lock_irqsave(&lock->wait_lock, flags); ret = __rt_mutex_slowlock_locked(lock, ww_ctx, state); raw_spin_unlock_irqrestore(&lock->wait_lock, flags); rt_mutex_post_schedule(); return ret; } static __always_inline int __rt_mutex_lock(struct rt_mutex_base *lock, unsigned int state) { lockdep_assert(!current->pi_blocked_on); if (likely(rt_mutex_try_acquire(lock))) return 0; return rt_mutex_slowlock(lock, NULL, state); } #endif /* RT_MUTEX_BUILD_MUTEX */ #ifdef RT_MUTEX_BUILD_SPINLOCKS /* * Functions required for spin/rw_lock substitution on RT kernels */ /** * rtlock_slowlock_locked - Slow path lock acquisition for RT locks * @lock: The underlying RT mutex */ static void __sched rtlock_slowlock_locked(struct rt_mutex_base *lock) { struct rt_mutex_waiter waiter; struct task_struct *owner; lockdep_assert_held(&lock->wait_lock); if (try_to_take_rt_mutex(lock, current, NULL)) return; rt_mutex_init_rtlock_waiter(&waiter); /* Save current state and set state to TASK_RTLOCK_WAIT */ current_save_and_set_rtlock_wait_state(); trace_contention_begin(lock, LCB_F_RT); task_blocks_on_rt_mutex(lock, &waiter, current, NULL, RT_MUTEX_MIN_CHAINWALK); for (;;) { /* Try to acquire the lock again */ if (try_to_take_rt_mutex(lock, current, &waiter)) break; if (&waiter == rt_mutex_top_waiter(lock)) owner = rt_mutex_owner(lock); else owner = NULL; raw_spin_unlock_irq(&lock->wait_lock); if (!owner || !rtmutex_spin_on_owner(lock, &waiter, owner)) schedule_rtlock(); raw_spin_lock_irq(&lock->wait_lock); set_current_state(TASK_RTLOCK_WAIT); } /* Restore the task state */ current_restore_rtlock_saved_state(); /* * try_to_take_rt_mutex() sets the waiter bit unconditionally. * We might have to fix that up: */ fixup_rt_mutex_waiters(lock, true); debug_rt_mutex_free_waiter(&waiter); trace_contention_end(lock, 0); } static __always_inline void __sched rtlock_slowlock(struct rt_mutex_base *lock) { unsigned long flags; raw_spin_lock_irqsave(&lock->wait_lock, flags); rtlock_slowlock_locked(lock); raw_spin_unlock_irqrestore(&lock->wait_lock, flags); } #endif /* RT_MUTEX_BUILD_SPINLOCKS */