From 6f0312fd7e0e6f96fd847b0b2e1e0d2d2e8ef89d Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Wed, 12 Jul 2006 09:41:47 +0800 Subject: [PATCH] PCI: add PCI Express AER register definitions to pci_regs.h Add new defines of PCI-Express AER registers and their bits into file include/linux/pci_regs.h. Signed-off-by: Zhang Yanmin Signed-off-by: Greg Kroah-Hartman --- include/linux/pci_regs.h | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'include') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index 6bce4a240364..96930cb5927c 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -422,7 +422,23 @@ #define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ #define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ #define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +/* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 +/* Non-fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 +/* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 #define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +/* Multi ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 +/* ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 +/* Multi ERR_FATAL/NONFATAL Recevied */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ #define PCI_ERR_ROOT_COR_SRC 52 #define PCI_ERR_ROOT_SRC 54 -- cgit v1.2.3 From ffadcc2ff42ecedf71ea67d9051ff028927aed08 Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Wed, 12 Jul 2006 08:59:00 -0700 Subject: [PATCH] PCI: PCIE power management quirk When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Greg Kroah-Hartman --- drivers/pci/pci.c | 11 ++++++++++- drivers/pci/pci.h | 10 +++++++++- drivers/pci/quirks.c | 31 +++++++++++++++++++++++++++++++ include/linux/pci.h | 1 + 4 files changed, 51 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index cf57d7de3765..9f79dd6d51ab 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -19,6 +19,7 @@ #include /* isa_dma_bridge_buggy */ #include "pci.h" +unsigned int pci_pm_d3_delay = 10; /** * pci_bus_max_busnr - returns maximum PCI bus number of given bus' children @@ -313,6 +314,14 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) } else if (dev->current_state == state) return 0; /* we're already there */ + /* + * If the device or the parent bridge can't support PCI PM, ignore + * the request if we're doing anything besides putting it into D0 + * (which would only happen on boot). + */ + if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev)) + return 0; + /* find PCI PM capability in list */ pm = pci_find_capability(dev, PCI_CAP_ID_PM); @@ -363,7 +372,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state) /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) - msleep(10); + msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) udelay(200); diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 9cc842b666eb..08d58fc78ee1 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -47,7 +47,7 @@ extern int pci_msi_quirk; #else #define pci_msi_quirk 0 #endif - +extern unsigned int pci_pm_d3_delay; #ifdef CONFIG_PCI_MSI void disable_msi_mode(struct pci_dev *dev, int pos, int type); void pci_no_msi(void); @@ -66,7 +66,15 @@ static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; } static inline void pci_restore_msi_state(struct pci_dev *dev) {} static inline void pci_restore_msix_state(struct pci_dev *dev) {} #endif +static inline int pci_no_d1d2(struct pci_dev *dev) +{ + unsigned int parent_dstates = 0; + if (dev->bus->self) + parent_dstates = dev->bus->self->no_d1d2; + return (dev->no_d1d2 || parent_dstates); + +} extern int pcie_mch_quirk; extern struct device_attribute pci_dev_attrs[]; extern struct class_device_attribute class_device_attr_cpuaffinity; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 53a887e1014c..e3c78c39b7e4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1418,6 +1418,37 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pc DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); +/* + * Some Intel PCI Express chipsets have trouble with downstream + * device power management. + */ +static void quirk_intel_pcie_pm(struct pci_dev * dev) +{ + pci_pm_d3_delay = 120; + dev->no_d1d2 = 1; +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); /* * Fixup the cardbus bridges on the IBM Dock II docking station diff --git a/include/linux/pci.h b/include/linux/pci.h index 983fca251b25..8565b81d7fbc 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -161,6 +161,7 @@ struct pci_dev { unsigned int is_enabled:1; /* pci_enable_device has been called */ unsigned int is_busmaster:1; /* device is busmaster */ unsigned int no_msi:1; /* device may not use msi */ + unsigned int no_d1d2:1; /* only allow d0 or d3 */ unsigned int block_ucfg_access:1; /* userspace config space access is blocked */ unsigned int broken_parity_status:1; /* Device generates false positive parity */ unsigned int msi_enabled:1; -- cgit v1.2.3