From 3ba72b25211217de195e3f528dd36132b38a205b Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 17 Oct 2007 17:07:12 -0400 Subject: [PATCH] zd1201: avoid null ptr access of skb->dev skb->dev is not set until eth_type_trans is called... Signed-off-by: John W. Linville --- drivers/net/wireless/zd1201.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/zd1201.c b/drivers/net/wireless/zd1201.c index 935b144d9b56..d5c0c66188ca 100644 --- a/drivers/net/wireless/zd1201.c +++ b/drivers/net/wireless/zd1201.c @@ -327,8 +327,8 @@ static void zd1201_usbrx(struct urb *urb) memcpy(skb_put(skb, 6), &data[datalen-8], 6); memcpy(skb_put(skb, 2), &data[datalen-24], 2); memcpy(skb_put(skb, len), data, len); - skb->dev->last_rx = jiffies; skb->protocol = eth_type_trans(skb, zd->dev); + skb->dev->last_rx = jiffies; zd->stats.rx_packets++; zd->stats.rx_bytes += skb->len; netif_rx(skb); @@ -384,8 +384,8 @@ static void zd1201_usbrx(struct urb *urb) memcpy(skb_put(skb, 2), &data[6], 2); memcpy(skb_put(skb, len), data+8, len); } - skb->dev->last_rx = jiffies; skb->protocol = eth_type_trans(skb, zd->dev); + skb->dev->last_rx = jiffies; zd->stats.rx_packets++; zd->stats.rx_bytes += skb->len; netif_rx(skb); -- cgit v1.2.3 From d20c678a450a25c1c12925f60c1b4cc040acc17d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 10 Oct 2007 12:28:07 -0400 Subject: [PATCH] ipw2100: send WEXT scan events ipw2100 wasn't sending WEXT scan events at all on scan completion. And like ipw2200, the driver aggressively auto-scans, requiring non-user-requested scan events to be batched together and sent at specific intervals instead of many times per seconds. Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2100.c | 39 +++++++++++++++++++++++++++++++++++++++ drivers/net/wireless/ipw2100.h | 4 ++++ 2 files changed, 43 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c index 2d46a16c0945..2fa8eed86dc1 100644 --- a/drivers/net/wireless/ipw2100.c +++ b/drivers/net/wireless/ipw2100.c @@ -2105,12 +2105,46 @@ static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status) queue_delayed_work(priv->workqueue, &priv->rf_kill, round_jiffies(HZ)); } +static void send_scan_event(void *data) +{ + struct ipw2100_priv *priv = data; + union iwreq_data wrqu; + + wrqu.data.length = 0; + wrqu.data.flags = 0; + wireless_send_event(priv->net_dev, SIOCGIWSCAN, &wrqu, NULL); +} + +static void ipw2100_scan_event_later(struct work_struct *work) +{ + send_scan_event(container_of(work, struct ipw2100_priv, + scan_event_later.work)); +} + +static void ipw2100_scan_event_now(struct work_struct *work) +{ + send_scan_event(container_of(work, struct ipw2100_priv, + scan_event_now)); +} + static void isr_scan_complete(struct ipw2100_priv *priv, u32 status) { IPW_DEBUG_SCAN("scan complete\n"); /* Age the scan results... */ priv->ieee->scans++; priv->status &= ~STATUS_SCANNING; + + /* Only userspace-requested scan completion events go out immediately */ + if (!priv->user_requested_scan) { + if (!delayed_work_pending(&priv->scan_event_later)) + queue_delayed_work(priv->workqueue, + &priv->scan_event_later, + round_jiffies(msecs_to_jiffies(4000))); + } else { + priv->user_requested_scan = 0; + cancel_delayed_work(&priv->scan_event_later); + queue_work(priv->workqueue, &priv->scan_event_now); + } } #ifdef CONFIG_IPW2100_DEBUG @@ -4378,6 +4412,7 @@ static void ipw2100_kill_workqueue(struct ipw2100_priv *priv) cancel_delayed_work(&priv->wx_event_work); cancel_delayed_work(&priv->hang_check); cancel_delayed_work(&priv->rf_kill); + cancel_delayed_work(&priv->scan_event_later); destroy_workqueue(priv->workqueue); priv->workqueue = NULL; } @@ -6121,6 +6156,8 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, INIT_DELAYED_WORK(&priv->wx_event_work, ipw2100_wx_event_work); INIT_DELAYED_WORK(&priv->hang_check, ipw2100_hang_check); INIT_DELAYED_WORK(&priv->rf_kill, ipw2100_rf_kill); + INIT_WORK(&priv->scan_event_now, ipw2100_scan_event_now); + INIT_DELAYED_WORK(&priv->scan_event_later, ipw2100_scan_event_later); tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long)) ipw2100_irq_tasklet, (unsigned long)priv); @@ -7425,6 +7462,8 @@ static int ipw2100_wx_set_scan(struct net_device *dev, } IPW_DEBUG_WX("Initiating scan...\n"); + + priv->user_requested_scan = 1; if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) { IPW_DEBUG_WX("Start scan failed.\n"); diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h index de7d384d38af..1ee3348aedd9 100644 --- a/drivers/net/wireless/ipw2100.h +++ b/drivers/net/wireless/ipw2100.h @@ -588,6 +588,10 @@ struct ipw2100_priv { struct delayed_work wx_event_work; struct delayed_work hang_check; struct delayed_work rf_kill; + struct work_struct scan_event_now; + struct delayed_work scan_event_later; + + int user_requested_scan; u32 interrupts; int tx_interrupts; -- cgit v1.2.3 From 98798f4875b7149db4eb7d0a126fc6dcd9637821 Mon Sep 17 00:00:00 2001 From: Michael Wu Date: Wed, 10 Oct 2007 17:28:59 -0400 Subject: [PATCH] rtl8187: Fix more frag bit checking, rts duration calc The wrong pointer is passed to ieee80211_get_morefrag. Fix this. While we're at it, reorder things so they look better and the rts duration calculation is done with the right length. Thanks to Christoph Hellwig for finding the ieee80211_get_morefrag issue. Signed-off-by: Michael Wu Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 0ef887dd2867..805b2af50afc 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -131,7 +131,8 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb, struct rtl8187_tx_hdr *hdr; struct rtl8187_tx_info *info; struct urb *urb; - u32 tmp; + __le16 rts_dur = 0; + u32 flags; urb = usb_alloc_urb(0, GFP_ATOMIC); if (!urb) { @@ -139,24 +140,24 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb, return 0; } - hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr)); - tmp = skb->len - sizeof(*hdr); - tmp |= RTL8187_TX_FLAG_NO_ENCRYPT; - tmp |= control->rts_cts_rate << 19; - tmp |= control->tx_rate << 24; - if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb)) - tmp |= RTL8187_TX_FLAG_MORE_FRAG; + flags = skb->len; + flags |= RTL8187_TX_FLAG_NO_ENCRYPT; + flags |= control->rts_cts_rate << 19; + flags |= control->tx_rate << 24; + if (ieee80211_get_morefrag((struct ieee80211_hdr *)skb->data)) + flags |= RTL8187_TX_FLAG_MORE_FRAG; if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS) { - tmp |= RTL8187_TX_FLAG_RTS; - hdr->rts_duration = - ieee80211_rts_duration(dev, priv->if_id, skb->len, control); + flags |= RTL8187_TX_FLAG_RTS; + rts_dur = ieee80211_rts_duration(dev, priv->if_id, skb->len, control); } if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT) - tmp |= RTL8187_TX_FLAG_CTS; - hdr->flags = cpu_to_le32(tmp); + flags |= RTL8187_TX_FLAG_CTS; + + hdr = (struct rtl8187_tx_hdr *)skb_push(skb, sizeof(*hdr)); + hdr->flags = cpu_to_le32(flags); hdr->len = 0; - tmp = control->retry_limit << 8; - hdr->retry = cpu_to_le32(tmp); + hdr->rts_duration = rts_dur; + hdr->retry = cpu_to_le32(control->retry_limit << 8); info = (struct rtl8187_tx_info *)skb->cb; info->control = kmemdup(control, sizeof(*control), GFP_ATOMIC); -- cgit v1.2.3 From 90ba931fa1d3410c87d93ef774624d12533f37c3 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Thu, 11 Oct 2007 12:17:41 +0200 Subject: [PATCH] janitorial: fix all double includes in drivers/net/wireless This patch removes all double includes of the same file. This makes scripts/checkincludes.pl happy. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 1 - drivers/net/wireless/iwlwifi/iwl-3945-rs.c | 3 --- drivers/net/wireless/iwlwifi/iwl-3945.c | 1 - drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 3 --- drivers/net/wireless/iwlwifi/iwl-4965.c | 2 -- drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 -- drivers/net/wireless/iwlwifi/iwl4965-base.c | 2 -- drivers/net/wireless/iwlwifi/iwlwifi.h | 7 +------ 8 files changed, 1 insertion(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c141a264ac45..c9b0d1aa2063 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -49,7 +49,6 @@ #include "pio.h" #include "sysfs.h" #include "xmit.h" -#include "sysfs.h" #include "lo.h" #include "pcmcia.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index f4aabcf480e4..262ab0b55824 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -37,9 +37,6 @@ #include -#include -#include - #define IWL 3945 #include "../net/mac80211/ieee80211_rate.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index acb38750535f..19bcb01e2784 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -38,7 +38,6 @@ #include #include -#include #define IWL 3945 diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 287c75705c44..60caaea21076 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -36,9 +36,6 @@ #include -#include -#include - #define IWL 4965 #include "../net/mac80211/ieee80211_rate.h" diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index b50d20267c8a..557deebca1b9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -35,9 +35,7 @@ #include #include #include -#include #include -#include #define IWL 4965 diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 75e3b5c3f155..a1d2716556be 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -48,8 +48,6 @@ #include #include #include -#include -#include #include #include diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index b1a6e39f7821..7b0c602082b1 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -48,8 +48,6 @@ #include #include #include -#include -#include #include #include diff --git a/drivers/net/wireless/iwlwifi/iwlwifi.h b/drivers/net/wireless/iwlwifi/iwlwifi.h index e0b97c341215..432ce887807f 100644 --- a/drivers/net/wireless/iwlwifi/iwlwifi.h +++ b/drivers/net/wireless/iwlwifi/iwlwifi.h @@ -39,18 +39,13 @@ struct iwl_priv; /* Hardware specific file defines the PCI IDs table for that hardware module */ extern struct pci_device_id iwl_hw_card_ids[]; +#include "iwl-hw.h" #if IWL == 3945 - #define DRV_NAME "iwl3945" -#include "iwl-hw.h" #include "iwl-3945-hw.h" - #elif IWL == 4965 - #define DRV_NAME "iwl4965" -#include "iwl-hw.h" #include "iwl-4965-hw.h" - #endif #include "iwl-prph.h" -- cgit v1.2.3 From 4771afb56930d6b03a04fa231f06ae29c3a496de Mon Sep 17 00:00:00 2001 From: Michael Wu Date: Fri, 12 Oct 2007 16:45:12 -0400 Subject: [PATCH] rtl8187: remove NICMAC setting in configure_filters callback NICMAC should always be set. Signed-off-by: Michael Wu Signed-off-by: John W. Linville --- drivers/net/wireless/rtl8187_dev.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c index 805b2af50afc..de61c8fe6492 100644 --- a/drivers/net/wireless/rtl8187_dev.c +++ b/drivers/net/wireless/rtl8187_dev.c @@ -588,8 +588,6 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev, *total_flags = 0; - if (changed_flags & FIF_PROMISC_IN_BSS) - priv->rx_conf ^= RTL818X_RX_CONF_NICMAC; if (changed_flags & FIF_ALLMULTI) priv->rx_conf ^= RTL818X_RX_CONF_MULTICAST; if (changed_flags & FIF_FCSFAIL) @@ -602,8 +600,6 @@ static void rtl8187_configure_filter(struct ieee80211_hw *dev, if (mc_count > 0) priv->rx_conf |= RTL818X_RX_CONF_MULTICAST; - if (priv->rx_conf & RTL818X_RX_CONF_NICMAC) - *total_flags |= FIF_PROMISC_IN_BSS; if (priv->rx_conf & RTL818X_RX_CONF_MULTICAST) *total_flags |= FIF_ALLMULTI; if (priv->rx_conf & RTL818X_RX_CONF_FCS) -- cgit v1.2.3 From ba8007ceb076f336a453a049cc5353eaa01d7136 Mon Sep 17 00:00:00 2001 From: Michael Wu Date: Sat, 13 Oct 2007 20:35:05 -0400 Subject: [PATCH] p54: Make filter configuration atomic p54_set_filter is now called from configure_filter, which is not allowed to sleep. The filter configuration packet allocation should be atomic now. Thanks to Dmitry Torokhov for reporting this bug. Signed-off-by: Michael Wu Signed-off-by: John W. Linville --- drivers/net/wireless/p54common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/p54common.c b/drivers/net/wireless/p54common.c index 2c63cf0ad2cd..1437db0cf4b2 100644 --- a/drivers/net/wireless/p54common.c +++ b/drivers/net/wireless/p54common.c @@ -577,7 +577,7 @@ static int p54_set_filter(struct ieee80211_hw *dev, u16 filter_type, struct p54_tx_control_filter *filter; hdr = kzalloc(sizeof(*hdr) + sizeof(*filter) + - priv->tx_hdr_len, GFP_KERNEL); + priv->tx_hdr_len, GFP_ATOMIC); if (!hdr) return -ENOMEM; -- cgit v1.2.3 From c899a575fa9cc802a4a77f6c5078b14fc1d12487 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 14 Oct 2007 19:51:15 +0200 Subject: [PATCH] iwl4965-base.c: fix off-by-one errors This patch fixes two off-by-one errors resulting in array overflows spotted by the Coverity checker. Signed-off-by: Adrian Bunk Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl4965-base.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 7b0c602082b1..acdf5507d3d0 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -4492,13 +4492,13 @@ static u8 ratio2dB[100] = { * Conversion assumes that levels are voltages (20*log), not powers (10*log). */ int iwl_calc_db_from_ratio(int sig_ratio) { - /* Anything above 1000:1 just report as 60 dB */ - if (sig_ratio > 1000) + /* 1000:1 or higher just report as 60 dB */ + if (sig_ratio >= 1000) return 60; - /* Above 100:1, divide by 10 and use table, + /* 100:1 or higher, divide by 10 and use table, * add 20 dB to make up for divide by 10 */ - if (sig_ratio > 100) + if (sig_ratio >= 100) return (20 + (int)ratio2dB[sig_ratio/10]); /* We shouldn't see this */ -- cgit v1.2.3 From 208eec88639a61002bb140dc5c64984684c2705d Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 14 Oct 2007 16:04:30 -0500 Subject: [PATCH] b43legacy: Fix potential return of uninitialized variable Using the Coverity checker, Adrian Bunk found that routine b43legacy_start could return an unitialized variable. This patch fixes the problem. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index f0749510bcd7..d09479e816cd 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3306,7 +3306,7 @@ static int b43legacy_start(struct ieee80211_hw *hw) struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); struct b43legacy_wldev *dev = wl->current_dev; int did_init = 0; - int err; + int err = 0; mutex_lock(&wl->mutex); -- cgit v1.2.3 From e0579d576cb894a4cf3c5af04fbf38e8c1281738 Mon Sep 17 00:00:00 2001 From: Marc Pignat Date: Mon, 15 Oct 2007 08:51:52 +0200 Subject: [PATCH] zd1211rw, fix oops when ejecting install media The disconnect function can dereference the net_device structure when it is never allocated. This is the case when ejecting the device installer. Signed-off-by: Marc Pignat Acked-by: Daniel Drake Signed-off-by: John W. Linville --- drivers/net/wireless/zd1211rw/zd_usb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index b0684f965761..c755b6923812 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -1044,14 +1044,17 @@ error: static void disconnect(struct usb_interface *intf) { struct net_device *netdev = zd_intf_to_netdev(intf); - struct zd_mac *mac = zd_netdev_mac(netdev); - struct zd_usb *usb = &mac->chip.usb; + struct zd_mac *mac; + struct zd_usb *usb; /* Either something really bad happened, or we're just dealing with * a DEVICE_INSTALLER. */ if (netdev == NULL) return; + mac = zd_netdev_mac(netdev); + usb = &mac->chip.usb; + dev_dbg_f(zd_usb_dev(usb), "\n"); zd_netdev_disconnect(netdev); -- cgit v1.2.3 From 4457e1a497736328f01704ff416bc2355c12b975 Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Mon, 15 Oct 2007 14:40:56 +0200 Subject: [PATCH] iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs This patch fixes base rate needed for fixed rate operation in A band Signed-off-by: Ron Rindjunsky Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-4965-rs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 60caaea21076..8dc78c0bf1ff 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -2021,12 +2021,18 @@ static int open_file_generic(struct inode *inode, struct file *file) static void rs_dbgfs_set_mcs(struct iwl_rate_scale_priv *rs_priv, struct iwl_rate *mcs, int index) { - const u32 cck_rate = 0x820A; + u32 base_rate; + + if (rs_priv->phymode == (u8) MODE_IEEE80211A) + base_rate = 0x800D; + else + base_rate = 0x820A; + if (rs_priv->dbg_fixed.rate_n_flags) { if (index < 12) mcs->rate_n_flags = rs_priv->dbg_fixed.rate_n_flags; else - mcs->rate_n_flags = cck_rate; + mcs->rate_n_flags = base_rate; IWL_DEBUG_RATE("Fixed rate ON\n"); return; } -- cgit v1.2.3 From 923403b8074a6db4207b404934d5c821d73c199f Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 16 Oct 2007 14:29:38 -0700 Subject: [PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variable Fix an uninitialized variable in drivers/net/wireless/b43/main.c::b43_start(). Cc: Adrian Bunk Signed-off-by: WANG Cong Cc: Michael Buesch Cc: Larry Finger Cc: "John W. Linville" Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c9b0d1aa2063..5f03efdb63a8 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3494,7 +3494,7 @@ static int b43_start(struct ieee80211_hw *hw) struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; int did_init = 0; - int err; + int err = 0; mutex_lock(&wl->mutex); -- cgit v1.2.3 From 023384faf6a6cb44b5d4a265a7c58279ff810de1 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 17 Oct 2007 20:09:02 +0200 Subject: [PATCH] b43: Make b43_stop() static This fixes a sparse warning. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 5f03efdb63a8..9d9ff76a9bc6 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3520,7 +3520,7 @@ static int b43_start(struct ieee80211_hw *hw) return err; } -void b43_stop(struct ieee80211_hw *hw) +static void b43_stop(struct ieee80211_hw *hw) { struct b43_wl *wl = hw_to_b43_wl(hw); struct b43_wldev *dev = wl->current_dev; -- cgit v1.2.3 From c7c466763d70059ead7ed990e2e9766a0caf9509 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 18 Oct 2007 02:04:15 +0200 Subject: [PATCH] iwlwifi: Fix rate setting in probe request for HW sacn This patch fixes setting of rates in probe request used in HW scan. The bug was reported by Helmut Schaa Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl3945-base.c | 42 ++++++++++++++++++----------- drivers/net/wireless/iwlwifi/iwl4965-base.c | 42 ++++++++++++++++++----------- 2 files changed, 52 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index a1d2716556be..83019d1d7ccc 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1747,21 +1747,22 @@ static void iwl_unset_hw_setting(struct iwl_priv *priv) * return : set the bit for each supported rate insert in ie */ static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, - u16 basic_rate, int max_count) + u16 basic_rate, int *left) { u16 ret_rates = 0, bit; int i; - u8 *rates; - - rates = &(ie[1]); + u8 *cnt = ie; + u8 *rates = ie + 1; for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { if (bit & supported_rate) { ret_rates |= bit; - rates[*ie] = iwl_rates[i].ieee | - ((bit & basic_rate) ? 0x80 : 0x00); - *ie = *ie + 1; - if (*ie >= max_count) + rates[*cnt] = iwl_rates[i].ieee | + ((bit & basic_rate) ? 0x80 : 0x00); + (*cnt)++; + (*left)--; + if ((*left <= 0) || + (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) break; } } @@ -1778,7 +1779,7 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, { int len = 0; u8 *pos = NULL; - u16 ret_rates; + u16 active_rates, ret_rates, cck_rates; /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ @@ -1823,19 +1824,27 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, left -= 2; if (left < 0) return 0; + /* ... fill it in... */ *pos++ = WLAN_EID_SUPP_RATES; *pos = 0; - ret_rates = priv->active_rate = priv->rates_mask; + + priv->active_rate = priv->rates_mask; + active_rates = priv->active_rate; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - iwl_supported_rate_to_ie(pos, priv->active_rate, - priv->active_rate_basic, left); + cck_rates = IWL_CCK_RATES_MASK & active_rates; + ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + + ret_rates = iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + len += 2 + *pos; pos += (*pos) + 1; - ret_rates = ~ret_rates & priv->active_rate; - - if (ret_rates == 0) + if (active_rates == 0) goto fill_end; /* fill in supported extended rate */ @@ -1846,7 +1855,8 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, /* ... fill it in... */ *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos = 0; - iwl_supported_rate_to_ie(pos, ret_rates, priv->active_rate_basic, left); + iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); if (*pos > 0) len += 2 + *pos; diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index acdf5507d3d0..5e1279263b22 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -1800,21 +1800,22 @@ static void iwl_unset_hw_setting(struct iwl_priv *priv) * return : set the bit for each supported rate insert in ie */ static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, - u16 basic_rate, int max_count) + u16 basic_rate, int *left) { u16 ret_rates = 0, bit; int i; - u8 *rates; - - rates = &(ie[1]); + u8 *cnt = ie; + u8 *rates = ie + 1; for (bit = 1, i = 0; i < IWL_RATE_COUNT; i++, bit <<= 1) { if (bit & supported_rate) { ret_rates |= bit; - rates[*ie] = iwl_rates[i].ieee | - ((bit & basic_rate) ? 0x80 : 0x00); - *ie = *ie + 1; - if (*ie >= max_count) + rates[*cnt] = iwl_rates[i].ieee | + ((bit & basic_rate) ? 0x80 : 0x00); + (*cnt)++; + (*left)--; + if ((*left <= 0) || + (*cnt >= IWL_SUPPORTED_RATES_IE_LEN)) break; } } @@ -1837,7 +1838,7 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, { int len = 0; u8 *pos = NULL; - u16 ret_rates; + u16 active_rates, ret_rates, cck_rates; /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ @@ -1882,19 +1883,27 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, left -= 2; if (left < 0) return 0; + /* ... fill it in... */ *pos++ = WLAN_EID_SUPP_RATES; *pos = 0; - ret_rates = priv->active_rate = priv->rates_mask; + + priv->active_rate = priv->rates_mask; + active_rates = priv->active_rate; priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK; - iwl_supported_rate_to_ie(pos, priv->active_rate, - priv->active_rate_basic, left); + cck_rates = IWL_CCK_RATES_MASK & active_rates; + ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + + ret_rates = iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); + active_rates &= ~ret_rates; + len += 2 + *pos; pos += (*pos) + 1; - ret_rates = ~ret_rates & priv->active_rate; - - if (ret_rates == 0) + if (active_rates == 0) goto fill_end; /* fill in supported extended rate */ @@ -1905,7 +1914,8 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, /* ... fill it in... */ *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos = 0; - iwl_supported_rate_to_ie(pos, ret_rates, priv->active_rate_basic, left); + iwl_supported_rate_to_ie(pos, active_rates, + priv->active_rate_basic, &left); if (*pos > 0) len += 2 + *pos; -- cgit v1.2.3 From db15178755f823d1fa8c242210cf04c26fca1483 Mon Sep 17 00:00:00 2001 From: Mattias Nissler Date: Sat, 13 Oct 2007 16:26:52 +0200 Subject: [PATCH] rt2x00: Fix residual check in PLCP calculations. Because rt2x00 implements the residual calculation different from what the legacy code does (i.e. scaled values), we need to adjust the residual check. Again, we are only mimicking the behaviour of the ralink driver without actually knowing what we do :-( Signed-off-by: Mattias Nissler Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index bb6f46cfbb9f..ff399f8083e9 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -550,7 +550,7 @@ void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev, /* * Check if we need to set the Length Extension */ - if (bitrate == 110 && residual <= 3) + if (bitrate == 110 && residual <= 30) desc.service |= 0x80; } -- cgit v1.2.3 From 1f06862e11f23ebc99438c592be9c92560d78548 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 13 Oct 2007 16:27:13 +0200 Subject: [PATCH] rt2x00: Add new rt73usb USB ID Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 3e42759473c3..46c8c0840a65 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2029,6 +2029,7 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) }, /* Billionton */ { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) }, /* Buffalo */ -- cgit v1.2.3 From 418d6f871b7bab19e9f12a6c0e4713a15d6bae10 Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 18 Oct 2007 09:23:11 +0200 Subject: DM9000 initialization fix DM9000 driver returns success even if it is failed to detect the chip. Below patch fixes it. Signed-off-by: Mike Rapoport drivers/net/dm9000.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) Signed-off-by: Jeff Garzik --- drivers/net/dm9000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 27ac010900ab..3286d2a0a870 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -542,7 +542,8 @@ dm9000_probe(struct platform_device *pdev) if (id_val != DM9000_ID) { printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val); - goto release; + ret = -ENODEV; + goto out; } /* from this point we assume that we have found a DM9000 */ @@ -602,8 +603,7 @@ dm9000_probe(struct platform_device *pdev) } return 0; - release: - out: +out: printk("%s: not found (%d).\n", CARDNAME, ret); dm9000_release_board(pdev, db); -- cgit v1.2.3 From 5a46236d20faf1ec3712afb28203f7a1adb5d39d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Oct 2007 12:20:21 -0700 Subject: phy/bitbang: missing MODULE_LICENSE Missing MODULE_LICENSE(), loading this module taints the kernel. Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio-bitbang.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c index 8cd243d92af3..2747b1f89ffe 100644 --- a/drivers/net/phy/mdio-bitbang.c +++ b/drivers/net/phy/mdio-bitbang.c @@ -185,3 +185,5 @@ void free_mdio_bitbang(struct mii_bus *bus) module_put(ctrl->ops->owner); kfree(bus); } + +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From bf45abeb1d917e92775b4523ba0ddcfd331464b4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Oct 2007 17:16:20 -0700 Subject: NAPI: kconfig prompt and deleted doc file - make the kconfig NAPI option prompt consistent across all net drivers (other than EXPERIMENTAL; can it now be removed also, or is the new napi_struct implementation now EXPERIMENTAL ?) - remove comment about the now-deleted NAPI_HOWTO.txt file - clean up typos in Tulip NAPI & Interrupt Mitigation Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 37 +++++-------------------------------- drivers/net/tulip/Kconfig | 14 ++++++-------- 2 files changed, 11 insertions(+), 40 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 83d52c8acab0..1a92dc6f927a 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1293,9 +1293,6 @@ config PCNET32_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config AMD8111_ETH @@ -1313,7 +1310,7 @@ config AMD8111_ETH will be called amd8111e. config AMD8111E_NAPI - bool "Enable NAPI support" + bool "Use RX polling (NAPI)" depends on AMD8111_ETH help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -1324,9 +1321,6 @@ config AMD8111E_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config ADAPTEC_STARFIRE @@ -1355,9 +1349,6 @@ config ADAPTEC_STARFIRE_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config AC3200 @@ -1431,7 +1422,7 @@ config FORCEDETH called forcedeth. config FORCEDETH_NAPI - bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" depends on FORCEDETH && EXPERIMENTAL help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -1442,9 +1433,6 @@ config FORCEDETH_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config CS89x0 @@ -1756,9 +1744,6 @@ config VIA_RHINE_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - config LAN_SAA9730 bool "Philips SAA9730 Ethernet support" depends on NET_PCI && PCI && MIPS_ATLAS @@ -2003,9 +1988,6 @@ config E1000_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config E1000_DISABLE_PACKET_SPLIT @@ -2099,7 +2081,7 @@ config R8169 will be called r8169. This is recommended. config R8169_NAPI - bool "Use Rx and Tx Polling (NAPI) (EXPERIMENTAL)" + bool "Use Rx Polling (NAPI) (EXPERIMENTAL)" depends on R8169 && EXPERIMENTAL help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -2110,9 +2092,6 @@ config R8169_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config R8169_VLAN @@ -2364,7 +2343,7 @@ config GIANFAR and MPC86xx family of chips, and the FEC on the 8540. config GFAR_NAPI - bool "NAPI Support" + bool "Use Rx Polling (NAPI)" depends on GIANFAR config UCC_GETH @@ -2376,7 +2355,7 @@ config UCC_GETH which is available on some Freescale SOCs. config UGETH_NAPI - bool "NAPI Support" + bool "Use Rx Polling (NAPI)" depends on UCC_GETH config UGETH_MAGIC_PACKET @@ -2559,9 +2538,6 @@ config IXGB_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config S2IO @@ -2584,9 +2560,6 @@ config S2IO_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config MYRI10GE diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index 1c537d5a3062..49d7a290dbbc 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -67,7 +67,7 @@ config TULIP_MMIO If in doubt, say N. config TULIP_NAPI - bool "Use NAPI RX polling " + bool "Use RX polling (NAPI)" depends on TULIP help NAPI is a new driver API designed to reduce CPU and interrupt load @@ -78,18 +78,16 @@ config TULIP_NAPI deployed on potentially unfriendly networks (e.g. in a firewall), then say Y here. - See for more - information. - If in doubt, say N. config TULIP_NAPI_HW_MITIGATION - bool "Use Interrupt Mitigation " + bool "Use Interrupt Mitigation" depends on TULIP_NAPI ---help--- - Use HW to reduce RX interrupts. Not strict necessary since NAPI reduces - RX interrupts but itself. Although this reduces RX interrupts even at - low levels traffic at the cost of a small latency. + Use HW to reduce RX interrupts. Not strictly necessary since NAPI + reduces RX interrupts by itself. Interrupt mitigation reduces RX + interrupts even at low levels of traffic at the cost of a small + latency. If in doubt, say Y. -- cgit v1.2.3 From e0d5dab24deac859b1b2326c4ad0745572d16d10 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 18 Oct 2007 21:53:50 -0700 Subject: ir-functions.c:(.text+0xbce18): undefined reference to `input_event' [bugme-daemon@bugzilla.kernel.org wrote:] From: Randy Dunlap Drivers that use lro functions should depend on INET, otherwise they may not link correctly. Let's not select INET. Select should be used only for library-like code, not to enable subsystems. ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined! ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined! Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 1a92dc6f927a..2cafa5c1783e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2473,7 +2473,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS + depends on IBMEBUS && INET select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. @@ -2564,7 +2564,7 @@ config S2IO_NAPI config MYRI10GE tristate "Myricom Myri-10G Ethernet support" - depends on PCI + depends on PCI && INET select FW_LOADER select CRC32 select INET_LRO -- cgit v1.2.3 From 224426f168aa4af3dcb628e6edaa824d32d60e6f Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Thu, 1 Jan 1970 01:00:01 +0100 Subject: qeth: remove header_ops bug Remove qeth bug caused by commit: [NET]: Move hardware header operations out of netdevice. Signed-off-by: Ursula Braun Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index a2d08c9ba3c4..ff999ff0b627 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -6643,7 +6643,8 @@ qeth_netdev_init(struct net_device *dev) dev->vlan_rx_kill_vid = qeth_vlan_rx_kill_vid; dev->vlan_rx_add_vid = qeth_vlan_rx_add_vid; #endif - dev->header_ops = &qeth_null_ops; + if (qeth_get_netdev_flags(card) & IFF_NOARP) + dev->header_ops = &qeth_null_ops; #ifdef CONFIG_QETH_IPV6 /*IPv6 address autoconfiguration stuff*/ -- cgit v1.2.3 From c9b2ca735a7685fa8aafd17b3cf3f9f20449d10b Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 19 Oct 2007 21:04:20 -0500 Subject: Fix build break in tsi108.c Fix build break: drivers/net/tsi108_eth.c: In function 'tsi108_init_one': drivers/net/tsi108_eth.c:1633: error: expected ')' before 'dev' drivers/net/tsi108_eth.c:1633: warning: too few arguments for format make[2]: *** [drivers/net/tsi108_eth.o] Error 1 Signed-off-by: Olof Johansson Signed-off-by: Jeff Garzik --- drivers/net/tsi108_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c index df10af7df7b8..35d15e850075 100644 --- a/drivers/net/tsi108_eth.c +++ b/drivers/net/tsi108_eth.c @@ -1629,7 +1629,7 @@ tsi108_init_one(struct platform_device *pdev) goto register_fail; } - printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n" + printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %s\n", dev->name, print_mac(mac, dev->dev_addr)); #ifdef DEBUG data->msg_enable = DEBUG; -- cgit v1.2.3