From f69753140d5c95087a3352710ae5edd541710da6 Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Wed, 1 Jun 2011 13:01:01 +1000 Subject: xhci: Bigendian fix for skip_isoc_td() Commit 926008c9386dde09b015753b6681c502177baa30 "USB: xhci: simplify logic of skipping missed isoc TDs" added a small endian bug. This patch fixes skip_isoc_td() to read the DMA pointer correctly. Signed-off-by: Matt Evans Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index cc1485bfed38..800f417c7309 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1782,7 +1782,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, struct usb_iso_packet_descriptor *frame; int idx; - ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer); + ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); urb_priv = td->urb->hcpriv; idx = urb_priv->td_cnt; frame = &td->urb->iso_frame_desc[idx]; -- cgit v1.2.3 From 4819fef5e7cb9a39e1fd59ecd85861b3ffebdcaa Mon Sep 17 00:00:00 2001 From: Matt Evans Date: Wed, 1 Jun 2011 13:01:07 +1000 Subject: xhci: Bigendian fix for xhci_check_bandwidth() Commit 834cb0fc4712a3b21c6b8c5cb55bd13607191311 "xhci: Fix memory leak bug when dropping endpoints" added a small endian bug. This patch fixes xhci_check_bandwidth() to read add/drop_flags LE. Signed-off-by: Matt Evans Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index d9660eb97eb9..ecd202101617 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1849,8 +1849,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Free any rings that were dropped, but not changed. */ for (i = 1; i < 31; ++i) { - if ((ctrl_ctx->drop_flags & (1 << (i + 1))) && - !(ctrl_ctx->add_flags & (1 << (i + 1)))) + if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && + !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } xhci_zero_in_ctx(xhci, virt_dev); -- cgit v1.2.3 From e2b0217715c6d10379d94bdfe5560af96eecbb7c Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 1 Jun 2011 23:27:49 +0200 Subject: xhci: Add defines for hardcoded slot states This needs to be added to the stable trees back to 2.6.34 to support an upcoming bug fix. Signed-off-by: Maarten Lankhorst Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-dbg.c | 8 ++++---- drivers/usb/host/xhci.h | 5 +++++ 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index 2e0486178dbe..1f50b4468e87 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -438,13 +438,13 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci, struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx); switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) { - case 0: + case SLOT_STATE_ENABLED: return "enabled/disabled"; - case 1: + case SLOT_STATE_DEFAULT: return "default"; - case 2: + case SLOT_STATE_ADDRESSED: return "addressed"; - case 3: + case SLOT_STATE_CONFIGURED: return "configured"; default: return "reserved"; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index ac0196e7fcf1..bbc1d9afb49c 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -560,6 +560,11 @@ struct xhci_slot_ctx { #define SLOT_STATE (0x1f << 27) #define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27) +#define SLOT_STATE_DISABLED 0 +#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED +#define SLOT_STATE_DEFAULT 1 +#define SLOT_STATE_ADDRESSED 2 +#define SLOT_STATE_CONFIGURED 3 /** * struct xhci_ep_ctx -- cgit v1.2.3 From 001fd3826f4c736ce292315782d015f768399080 Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Wed, 1 Jun 2011 23:27:50 +0200 Subject: xhci: Do not issue device reset when device is not setup xHCI controllers respond to a Reset Device command when the Slot is in the Enabled/Disabled state by returning an error. This is fine on other host controllers, but the Etron xHCI host controller returns a vendor-specific error code that the xHCI driver doesn't understand. The xHCI driver then gives up on device enumeration. Instead of issuing a command that will fail, just return. This fixes the issue with the xhci driver not working on ASRock P67 Pro/Extreme boards. This should be backported to stable kernels as far back as 2.6.34. Signed-off-by: Maarten Lankhorst Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ecd202101617..66f3e41bba52 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2467,6 +2467,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_command *reset_device_cmd; int timeleft; int last_freed_endpoint; + struct xhci_slot_ctx *slot_ctx; ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__); if (ret <= 0) @@ -2499,6 +2500,12 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) return -EINVAL; } + /* If device is not setup, there is no point in resetting it */ + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); + if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) == + SLOT_STATE_DISABLED) + return 0; + xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id); /* Allocate the command structure that holds the struct completion. * Assume we're in process context, since the normal device reset -- cgit v1.2.3 From f5182b4155b9d686c5540a6822486400e34ddd98 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Thu, 2 Jun 2011 11:33:02 -0700 Subject: xhci: Disable MSI for some Fresco Logic hosts. Some Fresco Logic hosts, including those found in the AUAU N533V laptop, advertise MSI, but fail to actually generate MSI interrupts. Add a new xHCI quirk to skip MSI enabling for the Fresco Logic host controllers. Fresco Logic confirms that all chips with PCI vendor ID 0x1b73 and device ID 0x1000, regardless of PCI revision ID, do not support MSI. This should be backported to stable kernels as far back as 2.6.36, which was the first kernel to support MSI on xHCI hosts. Signed-off-by: Sarah Sharp Reported-by: Sergey Galanov Cc: stable@kernel.org --- drivers/usb/host/xhci-pci.c | 14 ++++++++++++-- drivers/usb/host/xhci.c | 7 +++++++ drivers/usb/host/xhci.h | 1 + 3 files changed, 20 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c408e9f6a707..17541d09eabb 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -106,12 +106,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Look for vendor-specific quirks */ if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && - pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK && - pdev->revision == 0x0) { + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) { + if (pdev->revision == 0x0) { xhci->quirks |= XHCI_RESET_EP_QUIRK; xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure" " endpoint cmd after reset endpoint\n"); + } + /* Fresco Logic confirms: all revisions of this chip do not + * support MSI, even though some of them claim to in their PCI + * capabilities. + */ + xhci->quirks |= XHCI_BROKEN_MSI; + xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u " + "has broken MSI implementation\n", + pdev->revision); } + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 66f3e41bba52..06e7023258d0 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd) free_irq(hcd->irq, hcd); hcd->irq = -1; + /* Some Fresco Logic host controllers advertise MSI, but fail to + * generate interrupts. Don't even try to enable MSI. + */ + if (xhci->quirks & XHCI_BROKEN_MSI) + goto legacy_irq; + ret = xhci_setup_msix(xhci); if (ret) /* fall back to msi*/ ret = xhci_setup_msi(xhci); if (ret) { +legacy_irq: /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index bbc1d9afb49c..7d1ea3bf5e1f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1307,6 +1307,7 @@ struct xhci_hcd { * commands. */ #define XHCI_EP_LIMIT_QUIRK (1 << 5) +#define XHCI_BROKEN_MSI (1 << 6) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ -- cgit v1.2.3 From cd3c18ba2fac14b34d03cae111f215009735ea06 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 31 May 2011 14:37:23 -0700 Subject: USB: xhci - fix interval calculation for FS isoc endpoints Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans Signed-off-by: Dmitry Torokhov Signed-off-by: Sarah Sharp Cc: stable@kernel.org --- drivers/usb/host/xhci-mem.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 26caba4c1950..0f8e1d29a858 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -985,9 +985,19 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, interval = clamp_val(ep->desc.bInterval, 1, 16) - 1; if (interval != ep->desc.bInterval - 1) dev_warn(&udev->dev, - "ep %#x - rounding interval to %d microframes\n", + "ep %#x - rounding interval to %d %sframes\n", ep->desc.bEndpointAddress, - 1 << interval); + 1 << interval, + udev->speed == USB_SPEED_FULL ? "" : "micro"); + + if (udev->speed == USB_SPEED_FULL) { + /* + * Full speed isoc endpoints specify interval in frames, + * not microframes. We are using microframes everywhere, + * so adjust accordingly. + */ + interval += 3; /* 1 frame = 2^3 uframes */ + } return interval; } -- cgit v1.2.3 From cdacb598fe7ab85de80908c818dd7d66a2971117 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 Jun 2011 16:08:39 -0500 Subject: option: add Zoom 4597 modem USB IDs Uses Longcheer-based firmware and AT command set. Signed-off-by: Dan Williams Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 318dd00040a3..e39e7e8ba53a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -379,6 +379,9 @@ static void option_instat_callback(struct urb *urb); * It seems to contain a Qualcomm QSC6240/6290 chipset */ #define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 +/* Zoom */ +#define ZOOM_PRODUCT_4597 0x9607 + /* Haier products */ #define HAIER_VENDOR_ID 0x201e #define HAIER_PRODUCT_CE100 0x2009 @@ -942,6 +945,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, /* Pirelli */ { USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)}, -- cgit v1.2.3 From 15badbcc8eede58b0d7e53a3acde1c90a7b6e40e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 Jun 2011 16:22:44 -0500 Subject: option: add Alcatel X200 to sendsetup blacklist This modem really wants sendsetup blacklisted for interfaces 0 and 1, otherwise the kernel hardlocks for about 10 seconds while waiting for the modem's firmware to respond, which it of course doesn't do. A slight complication here is that TCT (who owns the Alcatel brand) used the same USB IDs for the X200 as the X060s despite the devices having completely different firmware and AT command sets, so we end up adding the X060s to the blacklist at the same time. PSA to OEMs: don't use the same USB IDs for different devices. Really. It makes your kittens cry. Signed-off-by: Dan Williams Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e39e7e8ba53a..c7cca3f24c9d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -344,7 +344,7 @@ static void option_instat_callback(struct urb *urb); /* ALCATEL PRODUCTS */ #define ALCATEL_VENDOR_ID 0x1bbb -#define ALCATEL_PRODUCT_X060S 0x0000 +#define ALCATEL_PRODUCT_X060S_X200 0x0000 #define PIRELLI_VENDOR_ID 0x1266 #define PIRELLI_PRODUCT_C100_1 0x1002 @@ -435,6 +435,13 @@ static const struct option_blacklist_info four_g_w14_blacklist = { .reason = OPTION_BLACKLIST_SENDSETUP }; +static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 }; +static const struct option_blacklist_info alcatel_x200_blacklist = { + .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup), + .ifaceinfo = alcatel_x200_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -939,7 +946,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, - { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, + { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), + .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist + }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), -- cgit v1.2.3 From 5c3e4076ee8253c1e3688d10653ddee47a03b0db Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 6 Jun 2011 16:55:41 -0500 Subject: option: add Prolink PH300 modem IDs Simple ID addition. Signed-off-by: Dan Williams Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c7cca3f24c9d..2c10e298925a 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -340,6 +340,7 @@ static void option_instat_callback(struct urb *urb); #define TOSHIBA_PRODUCT_G450 0x0d45 #define ALINK_VENDOR_ID 0x1e0e +#define ALINK_PRODUCT_PH300 0x9100 #define ALINK_PRODUCT_3GU 0x9200 /* ALCATEL PRODUCTS */ @@ -945,6 +946,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) }, + { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist -- cgit v1.2.3 From 7e8e62e4a5d26e4cb45f25dddd093837d75616c2 Mon Sep 17 00:00:00 2001 From: Torsten Hilbrich Date: Mon, 6 Jun 2011 15:39:55 +0200 Subject: USB: option Add blacklist for ZTE K3765-Z (19d2:2002) The funtion option_send_status times out when sending USB messages to the interfaces 0, 1, and 2 of this UMTS stick. This results in a 5s timeout in the function causing other tty operations to feel very sluggish. This patch adds a blacklist entry for these 3 interfaces on the ZTE K3765-Z device. I was also able to reproduce the problem with v2.6.38 and v2.6.39. This is very similar to a problem fixed in commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2 Author: Herton Ronaldo Krzesinski Date: Wed Mar 9 09:19:48 2011 +0000 USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626 Signed-off-by: Torsten Hilbrich Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 2c10e298925a..f7583f847438 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -443,6 +443,13 @@ static const struct option_blacklist_info alcatel_x200_blacklist = { .reason = OPTION_BLACKLIST_SENDSETUP }; +static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 }; +static const struct option_blacklist_info zte_k3765_z_blacklist = { + .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup), + .ifaceinfo = zte_k3765_z_no_sendsetup, + .reason = OPTION_BLACKLIST_SENDSETUP +}; + static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -927,7 +934,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, -- cgit v1.2.3 From 3898115896c7f18cb7009de691c43cb3d92bb82a Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Fri, 27 May 2011 08:37:40 +0400 Subject: usb-gadget: unlock data->lock mutex on error path in ep_write() ep_write() acquires data->lock mutex in get_ready_ep() and releases it on all paths except for one: when usb_endpoint_xfer_isoc() failed. The patch adds mutex_unlock(&data->lock) at that path. It is similar to commit 00cc7a5 ("usb-gadget: unlock data->lock mutex on error path in ep_read()"), it was not fixed at that time by accident. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/inode.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index a01383f71f38..a56876aaf76c 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -431,8 +431,10 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* halt any endpoint by doing a "wrong direction" i/o call */ if (!usb_endpoint_dir_in(&data->desc)) { - if (usb_endpoint_xfer_isoc(&data->desc)) + if (usb_endpoint_xfer_isoc(&data->desc)) { + mutex_unlock(&data->lock); return -EINVAL; + } DBG (data->dev, "%s halt\n", data->name); spin_lock_irq (&data->dev->lock); if (likely (data->ep != NULL)) -- cgit v1.2.3 From 4061fde2fa80f40cb27114f60500d38d0afcf350 Mon Sep 17 00:00:00 2001 From: Toby Gray Date: Mon, 6 Jun 2011 14:52:48 +0100 Subject: USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7 This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing the secondary ACM channel on the device to be exposed. Without this patch the ACM driver won't claim this secondary channel as it's marked as having a vendor-specific protocol. Signed-off-by: Toby Gray Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 395a347f2ebb..dac7676ce21b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1530,6 +1530,8 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */ { NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */ + { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */ + { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ -- cgit v1.2.3 From 9303961f5b8c8da0b65b897fb6521d2a123ec8a8 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 25 May 2011 08:13:24 -0400 Subject: musb: fix prefetch build failure After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/musb_core.c: In function 'musb_write_fifo': drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/musb/musb_core.o] Error 1 Signed-off-by: Mike Frysinger Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index ab8e1001e5e2..c71b0372786e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -96,6 +96,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From 3824c1ddaf744be44b170a335332b9d6afe79254 Mon Sep 17 00:00:00 2001 From: Libor Pechacek Date: Fri, 20 May 2011 14:53:25 +0200 Subject: USB: core: Tolerate protocol stall during hub and port status read Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 79a58c3a2e2a..90ae1753dda1 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, data, sizeof(*data), USB_STS_TIMEOUT); @@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1, data, sizeof(*data), USB_STS_TIMEOUT); -- cgit v1.2.3 From 1d4a4bde6b1cd4c8bbe1dd20dee18416a62b9c51 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 31 May 2011 09:11:11 -0700 Subject: usb: remove bad dput after dentry_unhash Commit 64252c75a (vfs: remove dget() from dentry_unhash()) removed the useless dget from dentry_unhash but didn't fix up this caller in the usb code. There used to be exactly one dput per dentry_unhash call; now there are none. Tested-by: Sebastian Andrzej Siewior Signed-off-by: Sage Weil Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/inode.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 1b125c224dcf..2278dad886e2 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -389,7 +389,6 @@ static int usbfs_rmdir(struct inode *dir, struct dentry *dentry) mutex_unlock(&inode->i_mutex); if (!error) d_delete(dentry); - dput(dentry); return error; } -- cgit v1.2.3 From 83a018045659ee2cc9b1390ddb8b2a247d269bc4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 1 Jun 2011 17:16:15 +0100 Subject: USB: s3c-hsotg: Tone down debugging Currently the s3c-hsotg driver is extremely chatty, producing voluminous with large register dumps even in default operation. Tone this down so we're not chatty unless DEBUG is defined. Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/s3c-hsotg.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index acb9cc418df9..0dfee282878a 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2680,9 +2680,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, writel(0, hsotg->regs + S3C_DAINTMSK); - dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); /* enable in and out endpoint interrupts */ s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt); @@ -2701,7 +2701,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, udelay(10); /* see openiboot */ __bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone); - dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); + dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL)); /* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by writing to the EPCTL register.. */ @@ -2721,9 +2721,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, s3c_hsotg_enqueue_setup(hsotg); - dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", - readl(hsotg->regs + S3C_DIEPCTL0), - readl(hsotg->regs + S3C_DOEPCTL0)); + dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + readl(hsotg->regs + S3C_DIEPCTL0), + readl(hsotg->regs + S3C_DOEPCTL0)); /* clear global NAKs */ writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK, @@ -2921,9 +2921,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) /* setup fifos */ - dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", - readl(hsotg->regs + S3C_GRXFSIZ), - readl(hsotg->regs + S3C_GNPTXFSIZ)); + dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n", + readl(hsotg->regs + S3C_GRXFSIZ), + readl(hsotg->regs + S3C_GNPTXFSIZ)); s3c_hsotg_init_fifo(hsotg); @@ -2945,6 +2945,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg) static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) { +#ifdef DEBUG struct device *dev = hsotg->dev; void __iomem *regs = hsotg->regs; u32 val; @@ -2987,6 +2988,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg) dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n", readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE)); +#endif } -- cgit v1.2.3 From b38b03b363a53067e8b8f3f43f00b6428bd5319c Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 2 Jun 2011 12:51:29 +0800 Subject: usb: gadget: include to fix compiling error drivers/usb/gadget/at91_udc.c: In function 'write_fifo': drivers/usb/gadget/at91_udc.c:421:2: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/gadget/at91_udc.o] Error 1 make[2]: *** [drivers/usb/gadget] Error 2 make[2]: *** Waiting for unfinished jobs.... Signed-off-by: Bryan Wu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/amd5536udc.c | 1 + drivers/usb/gadget/at91_udc.c | 1 + drivers/usb/gadget/net2280.c | 1 + drivers/usb/gadget/s3c-hsudc.c | 1 + drivers/usb/gadget/s3c2410_udc.c | 1 + 5 files changed, 5 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 6e42aab75806..95e8138cd48f 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -60,6 +60,7 @@ #include #include #include +#include #include #include diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 41dc093c0a1b..f4690ffcb489 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 24696f7fa6a9..476d88e1ae97 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -63,6 +63,7 @@ #include #include #include +#include #include #include diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index cfe3cf56d6bd..9a1b966e18db 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 6d8b04061d5d..100f2635cf0a 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From cb42447374eb4348b75ec677bf9c77958c7d10e0 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 3 Jun 2011 19:50:45 +0200 Subject: usb/mv_udc_core: fix compile |drivers/usb/gadget/mv_udc_core.c:2108: error: label `error' used but not defined This seems to be broken since the initial commit. I changed this to a simple return. The other user is the probe code which lets ->probe() fail on error here. |drivers/usb/gadget/mv_udc_core.c:2107: warning: passing argument 1 of `dev_err' from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2118: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2119: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2130: error: initializer element is not constant |drivers/usb/gadget/mv_udc_core.c:2130: error: (near initialization for `udc_driver.driver.pm') Cc: Chao Xie Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/mv_udc_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c index b62b2640deb0..b1a8146b9d50 100644 --- a/drivers/usb/gadget/mv_udc_core.c +++ b/drivers/usb/gadget/mv_udc_core.c @@ -2083,7 +2083,7 @@ out: } #ifdef CONFIG_PM -static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state) +static int mv_udc_suspend(struct device *_dev) { struct mv_udc *udc = the_controller; @@ -2092,7 +2092,7 @@ static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state) return 0; } -static int mv_udc_resume(struct platform_device *_dev) +static int mv_udc_resume(struct device *_dev) { struct mv_udc *udc = the_controller; int retval; @@ -2100,7 +2100,7 @@ static int mv_udc_resume(struct platform_device *_dev) retval = mv_udc_phy_init(udc->phy_regs); if (retval) { dev_err(_dev, "phy initialization error %d\n", retval); - goto error; + return retval; } udc_reset(udc); ep0_reset(udc); @@ -2122,7 +2122,7 @@ static struct platform_driver udc_driver = { .owner = THIS_MODULE, .name = "pxa-u2o", #ifdef CONFIG_PM - .pm = mv_udc_pm_ops, + .pm = &mv_udc_pm_ops, #endif }, }; -- cgit v1.2.3 From a6207b17ece4ea40c378233b1ddf2a7f4288419d Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 3 Jun 2011 19:50:46 +0200 Subject: usb/pxa25x_udc: cleanup the LUBBOCK err path this is more backwords than it has to be. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa25x_udc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 365c02fc25fc..774545494cf2 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -2216,7 +2216,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev) if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_DISC_IRQ, retval); -lubbock_fail0: goto err_irq_lub; } retval = request_irq(LUBBOCK_USB_IRQ, @@ -2226,7 +2225,6 @@ lubbock_fail0: if (retval != 0) { pr_err("%s: can't get irq %i, err %d\n", driver_name, LUBBOCK_USB_IRQ, retval); - free_irq(LUBBOCK_USB_DISC_IRQ, dev); goto lubbock_fail0; } } else @@ -2236,10 +2234,11 @@ lubbock_fail0: return 0; #ifdef CONFIG_ARCH_LUBBOCK +lubbock_fail0: free_irq(LUBBOCK_USB_DISC_IRQ, dev); err_irq_lub: -#endif free_irq(irq, dev); +#endif err_irq1: if (gpio_is_valid(dev->mach->gpio_pullup)) gpio_free(dev->mach->gpio_pullup); -- cgit v1.2.3 From 6bc129532176fcafb4202b73b3f431986391a362 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 3 Jun 2011 19:50:47 +0200 Subject: usb/s3c-hsudc: fix error path I doubt the clock is optional. In case it is it should not return with an error code because we leak everything. Cc: Jingoo Han Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/s3c-hsudc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index 9a1b966e18db..d5e3e1e58626 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1302,7 +1302,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) hsudc->uclk = clk_get(&pdev->dev, "usb-device"); if (IS_ERR(hsudc->uclk)) { dev_err(dev, "failed to find usb-device clock source\n"); - return PTR_ERR(hsudc->uclk); + ret = PTR_ERR(hsudc->uclk); + goto err_clk; } clk_enable(hsudc->uclk); @@ -1311,7 +1312,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev) disable_irq(hsudc->irq); local_irq_enable(); return 0; - +err_clk: + free_irq(hsudc->irq, hsudc); err_irq: iounmap(hsudc->regs); -- cgit v1.2.3 From 3af51ac9c0889a188aaa3defe5134ef97c80d7c5 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 3 Jun 2011 19:50:48 +0200 Subject: usb/renesas_usbhs: free uep on removal Can't find evidence that this is actually done. Cc: Kuninori Morimoto Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/renesas_usbhs/mod_gadget.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 206cfabc9286..547486ccd059 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -1380,5 +1380,6 @@ void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv) { struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv); + kfree(gpriv->uep); kfree(gpriv); } -- cgit v1.2.3 From 21c13a4f7bc185552c4b402b792c3bbb9aa69df0 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 7 Jun 2011 11:35:52 -0400 Subject: usb-storage: redo incorrect reads Some USB mass-storage devices have bugs that cause them not to handle the first READ(10) command they receive correctly. The Corsair Padlock v2 returns completely bogus data for its first read (possibly it returns the data in encrypted form even though the device is supposed to be unlocked). The Feiya SD/SDHC card reader fails to complete the first READ(10) command after it is plugged in or after a new card is inserted, returning a status code that indicates it thinks the command was invalid, which prevents the kernel from retrying the read. Since the first read of a new device or a new medium is for the partition sector, the kernel is unable to retrieve the device's partition table. Users have to manually issue an "hdparm -z" or "blockdev --rereadpt" command before they can access the device. This patch (as1470) works around the problem. It adds a new quirk flag, US_FL_INVALID_READ10, indicating that the first READ(10) should always be retried immediately, as should any failing READ(10) commands (provided the preceding READ(10) command succeeded, to avoid getting stuck in a loop). The patch also adds appropriate unusual_devs entries containing the new flag. Signed-off-by: Alan Stern Tested-by: Sven Geggus Tested-by: Paul Hartman CC: Matthew Dharm CC: Signed-off-by: Greg Kroah-Hartman --- Documentation/kernel-parameters.txt | 2 ++ drivers/usb/storage/transport.c | 29 +++++++++++++++++++++++++++++ drivers/usb/storage/unusual_devs.h | 19 +++++++++++++++++++ drivers/usb/storage/usb.c | 13 ++++++++++++- drivers/usb/storage/usb.h | 2 ++ include/linux/usb_usual.h | 4 +++- 6 files changed, 67 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d9a203b058f1..fd248a318211 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2598,6 +2598,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. unlock ejectable media); m = MAX_SECTORS_64 (don't transfer more than 64 sectors = 32 KB at a time); + n = INITIAL_READ10 (force a retry of the + initial READ(10) command); o = CAPACITY_OK (accept the capacity reported by the device); r = IGNORE_RESIDUE (the device reports diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 00418995d8e9..e8ae21b2d387 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -819,6 +819,35 @@ Retry_Sense: } } + /* + * Some devices don't work or return incorrect data the first + * time they get a READ(10) command, or for the first READ(10) + * after a media change. If the INITIAL_READ10 flag is set, + * keep track of whether READ(10) commands succeed. If the + * previous one succeeded and this one failed, set the REDO_READ10 + * flag to force a retry. + */ + if (unlikely((us->fflags & US_FL_INITIAL_READ10) && + srb->cmnd[0] == READ_10)) { + if (srb->result == SAM_STAT_GOOD) { + set_bit(US_FLIDX_READ10_WORKED, &us->dflags); + } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) { + clear_bit(US_FLIDX_READ10_WORKED, &us->dflags); + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + } + + /* + * Next, if the REDO_READ10 flag is set, return a result + * code that will cause the SCSI core to retry the READ(10) + * command immediately. + */ + if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) { + clear_bit(US_FLIDX_REDO_READ10, &us->dflags); + srb->result = DID_IMM_RETRY << 16; + srb->sense_buffer[0] = 0; + } + } + /* Did we transfer less than the minimum amount required? */ if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) && scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c1602b8c5594..ccff3483eebc 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Paul Hartman + * This card reader returns "Illegal Request, Logical Block Address + * Out of Range" for the first READ(10) after a new card is inserted. + */ +UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100, + "Feiya", + "SD/SDHC Card Reader", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + /* This Pentax still camera is not conformant * to the USB storage specification: - * - It does not like the INQUIRY command. So we must handle this command @@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_READ_DISC_INFO ), +/* Reported by Sven Geggus + * This encrypted pen drive returns bogus data for the initial READ(10). + */ +UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200, + "Corsair", + "Padlock v2", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_INITIAL_READ10 ), + /* Patch by Richard Schütz * This external hard drive enclosure uses a JMicron chip which * needs the US_FL_IGNORE_RESIDUE flag to work properly. */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5ee7ac42e08f..0ca095820f3e 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us) US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | - US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16); + US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | + US_FL_INITIAL_READ10); p = quirks; while (*p) { @@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us) case 'm': f |= US_FL_MAX_SECTORS_64; break; + case 'n': + f |= US_FL_INITIAL_READ10; + break; case 'o': f |= US_FL_CAPACITY_OK; break; @@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us) if (result) goto BadDevice; + /* + * If the device returns invalid data for the first READ(10) + * command, indicate the command should be retried. + */ + if (us->fflags & US_FL_INITIAL_READ10) + set_bit(US_FLIDX_REDO_READ10, &us->dflags); + /* Acquire all the other resources and add the host */ result = usb_stor_acquire_resources(us); if (result) diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 89d3bfff98df..7b0f2113632e 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -73,6 +73,8 @@ struct us_unusual_dev { #define US_FLIDX_RESETTING 4 /* device reset in progress */ #define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */ #define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */ +#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */ +#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */ #define USB_STOR_STRING_LEN 32 diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 71693d4a4fe1..17df3600bcef 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -62,7 +62,9 @@ US_FLAG(NO_READ_DISC_INFO, 0x00040000) \ /* cannot handle READ_DISC_INFO */ \ US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ - /* cannot handle READ_CAPACITY_16 */ + /* cannot handle READ_CAPACITY_16 */ \ + US_FLAG(INITIAL_READ10, 0x00100000) \ + /* Initial READ(10) (and others) must be retried */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.2.3 From c5c69f3f0dcf9b569c8f3ad67f3af92cfcedac43 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 7 Jun 2011 11:33:01 -0400 Subject: USB: dummy-hcd needs the has_tt flag Like with other host controllers capable of operating at both high speed and full speed, we need to indicate that the emulated controller presented by dummy-hcd has this ability. Otherwise usbcore will not accept full-speed gadgets under dummy-hcd. This patch (as1469) sets the appropriate has_tt flag. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 61ff927928ab..d3dcabc1a5fc 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1906,6 +1906,7 @@ static int dummy_hcd_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; the_controller = hcd_to_dummy (hcd); + hcd->has_tt = 1; retval = usb_add_hcd(hcd, 0, 0); if (retval != 0) { -- cgit v1.2.3 From 97b2f900335befbf6c4323ea6fd560ea5df4d154 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 7 Jun 2011 11:31:05 -0400 Subject: USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurable This patch (as1468) changes the Kconfig definition for USB_GADGET_DUALSPEED. This option is determined entirely by which device controller drivers are to be built, through Select statements; it does not need to be (and should not be) configurable by the user. Also, the "default n" line is superfluous -- everything defaults to N. Signed-off-by: Alan Stern Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 58456d1aec21..029e288805b6 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -632,13 +632,10 @@ config USB_DUMMY_HCD endchoice +# Selected by UDC drivers that support high-speed operation. config USB_GADGET_DUALSPEED bool depends on USB_GADGET - default n - help - Means that gadget drivers should include extra descriptors - and code to handle dual-speed controllers. # # USB Gadget Drivers -- cgit v1.2.3 From 7febe2be36035e5c75128e8cc3baeb1f30fa2bc4 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Wed, 1 Jun 2011 19:10:06 +0200 Subject: drivers/usb/host/ohci-pxa27x.c: add missing clk_put Add a label before the call to clk_put and jump to that in the error handling code that occurs after the call to clk_get has succeeded. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // Signed-off-by: Julia Lawall Acked-by: Eric Miao Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-pxa27x.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index afef7b0a4195..80be5472783a 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -312,8 +312,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return PTR_ERR(usb_clk); hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x"); - if (!hcd) - return -ENOMEM; + if (!hcd) { + retval = -ENOMEM; + goto err0; + } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { @@ -368,6 +370,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); + err0: clk_put(usb_clk); return retval; } -- cgit v1.2.3 From 3095ec895fd5ec19a7cb60b5cbfa766d68a74a24 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 7 Jun 2011 15:03:37 -0700 Subject: Revert "USB: option: add ID for ZTE MF 330" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit a559d2c8c1bf652ea2d0ecd6ab4a250fcdb37db8. Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc when the option driver tries to bind to it. So revert this as it doesn't seem to be needed at all. Thanks to Michael Tokarev and PaweÅ‚ Drobek for working on resolving this issue. Cc: PaweÅ‚ Drobek Cc: Michael Tokarev Cc: Dominik Brodowski Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index f7583f847438..60b25d8ea0e2 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -311,10 +311,6 @@ static void option_instat_callback(struct urb *urb); #define ZTE_PRODUCT_AC2726 0xfff5 #define ZTE_PRODUCT_AC8710T 0xffff -/* ZTE PRODUCTS -- alternate vendor ID */ -#define ZTE_VENDOR_ID2 0x1d6b -#define ZTE_PRODUCT_MF_330 0x0002 - #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -941,7 +937,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, - { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ -- cgit v1.2.3 From a26d31cef06f43a76327c21235e75450869df2b8 Mon Sep 17 00:00:00 2001 From: Steffen Sledz Date: Tue, 7 Jun 2011 14:01:56 +0200 Subject: USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driver E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e8dbde55f6c5..162728977553 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -647,6 +647,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) }, { USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 1d946cd238ba..ab1fcdf3c378 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -351,6 +351,7 @@ */ #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 +#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2 /* * Linx Technologies product ids -- cgit v1.2.3