From 97ca0d6cc118716840ea443e010cb3d5f2d25eaf Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 1 Jul 2014 20:28:32 -0700 Subject: spi: omap2-mcspi: Configure hardware when slave driver changes mode Commit id 2bd16e3e23d9df41592c6b257c59b6860a9cc3ea (spi: omap2-mcspi: Do not configure the controller on each transfer unless needed) does its job too well so omap2_mcspi_setup_transfer() isn't called even when an SPI slave driver changes 'spi->mode'. The result is that the mode requested by the SPI slave driver never takes effect. Fix this by adding the 'mode' member to the omap2_mcspi_cs structure which holds the mode value that the hardware is configured for. When the SPI slave driver changes 'spi->mode' it will be different than the value of this new member and the SPI master driver will know that the hardware must be reconfigured (by calling omap2_mcspi_setup_transfer()). Fixes: 2bd16e3e23 (spi: omap2-mcspi: Do not configure the controller on each transfer unless needed) Signed-off-by: Mark A. Greer Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- drivers/spi/spi-omap2-mcspi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 4dc77df38864..68441fa448de 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -149,6 +149,7 @@ struct omap2_mcspi_cs { void __iomem *base; unsigned long phys; int word_len; + u16 mode; struct list_head node; /* Context save and restore shadow register */ u32 chconf0, chctrl0; @@ -926,6 +927,8 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi, mcspi_write_chconf0(spi, l); + cs->mode = spi->mode; + dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n", speed_hz, (spi->mode & SPI_CPHA) ? "trailing" : "leading", @@ -998,6 +1001,7 @@ static int omap2_mcspi_setup(struct spi_device *spi) return -ENOMEM; cs->base = mcspi->base + spi->chip_select * 0x14; cs->phys = mcspi->phys + spi->chip_select * 0x14; + cs->mode = 0; cs->chconf0 = 0; cs->chctrl0 = 0; spi->controller_state = cs; @@ -1079,6 +1083,16 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m) cs = spi->controller_state; cd = spi->controller_data; + /* + * The slave driver could have changed spi->mode in which case + * it will be different from cs->mode (the current hardware setup). + * If so, set par_override (even though its not a parity issue) so + * omap2_mcspi_setup_transfer will be called to configure the hardware + * with the correct mode on the first iteration of the loop below. + */ + if (spi->mode != cs->mode) + par_override = 1; + omap2_mcspi_set_enable(spi, 0); list_for_each_entry(t, &m->transfers, transfer_list) { if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { -- cgit v1.2.3 From 30670539b867d08c1931abd4815699de5887ee58 Mon Sep 17 00:00:00 2001 From: Himangi Saraogi Date: Fri, 4 Jul 2014 23:09:49 +0530 Subject: spi: au1550: Fix bug in deallocation of memory This patch fixes a bug on the deallocation of memory allocated using request_mem_region, by using release_mem_region instead of release_resource and kfree. Signed-off-by: Himangi Saraogi Signed-off-by: Mark Brown --- drivers/spi/spi-au1550.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c index 67375a11d4bd..fb61464348a1 100644 --- a/drivers/spi/spi-au1550.c +++ b/drivers/spi/spi-au1550.c @@ -925,8 +925,7 @@ err_no_txdma: iounmap((void __iomem *)hw->regs); err_ioremap: - release_resource(hw->ioarea); - kfree(hw->ioarea); + release_mem_region(r->start, sizeof(psc_spi_t)); err_no_iores: err_no_pdata: @@ -946,8 +945,7 @@ static int au1550_spi_remove(struct platform_device *pdev) spi_bitbang_stop(&hw->bitbang); free_irq(hw->irq, hw); iounmap((void __iomem *)hw->regs); - release_resource(hw->ioarea); - kfree(hw->ioarea); + release_mem_region(r->start, sizeof(psc_spi_t)); if (hw->usedma) { au1550_spi_dma_rxtmp_free(hw); -- cgit v1.2.3 From a39e65e9cc935b84f35d080e934c3fdd9ff86654 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 10 Jul 2014 11:26:28 +0200 Subject: spi: cadence: Make sure that clock polarity changes are applied It seems that the cadence SPI controller does not immediately change the clock polarity setting when writing the CR register. Instead the change is delayed until the next transfer starts. This happens after the chip select line has already been asserted. As a result the first transfer after a clock polarity change will generate spurious clock transitions which typically results in the SPI slave not being able to properly understand the message. Toggling the ER register seems to cause the SPI controller to apply the clock polarity changes, so implement this as a workaround to fix the issue. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- drivers/spi/spi-cadence.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index bb758978465d..f55702937052 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -205,18 +205,30 @@ static void cdns_spi_chipselect(struct spi_device *spi, bool is_high) static void cdns_spi_config_clock_mode(struct spi_device *spi) { struct cdns_spi *xspi = spi_master_get_devdata(spi->master); - u32 ctrl_reg; + u32 ctrl_reg, new_ctrl_reg; - ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); + new_ctrl_reg = ctrl_reg = cdns_spi_read(xspi, CDNS_SPI_CR_OFFSET); /* Set the SPI clock phase and clock polarity */ - ctrl_reg &= ~(CDNS_SPI_CR_CPHA_MASK | CDNS_SPI_CR_CPOL_MASK); + new_ctrl_reg &= ~(CDNS_SPI_CR_CPHA_MASK | CDNS_SPI_CR_CPOL_MASK); if (spi->mode & SPI_CPHA) - ctrl_reg |= CDNS_SPI_CR_CPHA_MASK; + new_ctrl_reg |= CDNS_SPI_CR_CPHA_MASK; if (spi->mode & SPI_CPOL) - ctrl_reg |= CDNS_SPI_CR_CPOL_MASK; - - cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, ctrl_reg); + new_ctrl_reg |= CDNS_SPI_CR_CPOL_MASK; + + if (new_ctrl_reg != ctrl_reg) { + /* + * Just writing the CR register does not seem to apply the clock + * setting changes. This is problematic when changing the clock + * polarity as it will cause the SPI slave to see spurious clock + * transitions. To workaround the issue toggle the ER register. + */ + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_DISABLE_MASK); + cdns_spi_write(xspi, CDNS_SPI_CR_OFFSET, new_ctrl_reg); + cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, + CDNS_SPI_ER_ENABLE_MASK); + } } /** -- cgit v1.2.3 From b48b9488e3180b173f37782a348b76ea6bff2c48 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Thu, 10 Jul 2014 11:26:29 +0200 Subject: spi: cadence: Configure SPI clock in the prepare_message() callback Currently the cadence SPI driver does the SPI clock configuration (setup CPOL and CPHA) in the prepare_transfer_hardware() callback. The prepare_transfer_hardware() callback is only called though when the controller transitions from a idle state to a non-idle state. Such a transitions happens when the message queue goes from empty to non-empty. If multiple messages from different SPI slaves with different clock settings are in the message queue the clock settings will not be properly updated when switching from one slave device to another. Instead do the updating of the clock configuration in the prepare_message() callback which will be called for each individual message. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- drivers/spi/spi-cadence.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c index f55702937052..3312eccb18c1 100644 --- a/drivers/spi/spi-cadence.c +++ b/drivers/spi/spi-cadence.c @@ -382,6 +382,12 @@ static irqreturn_t cdns_spi_irq(int irq, void *dev_id) return status; } +static int cdns_prepare_message(struct spi_master *master, + struct spi_message *msg) +{ + cdns_spi_config_clock_mode(msg->spi); + return 0; +} /** * cdns_transfer_one - Initiates the SPI transfer @@ -428,8 +434,6 @@ static int cdns_prepare_transfer_hardware(struct spi_master *master) { struct cdns_spi *xspi = spi_master_get_devdata(master); - cdns_spi_config_clock_mode(master->cur_msg->spi); - cdns_spi_write(xspi, CDNS_SPI_ER_OFFSET, CDNS_SPI_ER_ENABLE_MASK); @@ -544,6 +548,7 @@ static int cdns_spi_probe(struct platform_device *pdev) xspi->is_decoded_cs = 0; master->prepare_transfer_hardware = cdns_prepare_transfer_hardware; + master->prepare_message = cdns_prepare_message; master->transfer_one = cdns_transfer_one; master->unprepare_transfer_hardware = cdns_unprepare_transfer_hardware; master->set_cs = cdns_spi_chipselect; -- cgit v1.2.3 From e06871cd2c92e5c65d7ca1d32866b4ca5dd4ac30 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Sun, 27 Jul 2014 23:53:19 +0200 Subject: spi: orion: fix incorrect handling of cell-index DT property In commit f814f9ac5a81 ("spi/orion: add device tree binding"), Device Tree support was added to the spi-orion driver. However, this commit reads the "cell-index" property, without taking into account the fact that DT properties are big-endian encoded. Since most of the platforms using spi-orion with DT have apparently not used anything but cell-index = <0>, the problem was not visible. But as soon as one starts using cell-index = <1>, the problem becomes clearly visible, as the master->bus_num gets a wrong value (actually it gets the value 0, which conflicts with the first bus that has cell-index = <0>). This commit fixes that by using of_property_read_u32() to read the property value, which does the appropriate endianness conversion when needed. Fixes: f814f9ac5a81 ("spi/orion: add device tree binding") Signed-off-by: Thomas Petazzoni Acked-by: Sebastian Hesselbarth Signed-off-by: Mark Brown Cc: # v3.6+ --- drivers/spi/spi-orion.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/spi-orion.c b/drivers/spi/spi-orion.c index d018a4aac3a1..c206a4ad83cd 100644 --- a/drivers/spi/spi-orion.c +++ b/drivers/spi/spi-orion.c @@ -346,8 +346,6 @@ static int orion_spi_probe(struct platform_device *pdev) struct resource *r; unsigned long tclk_hz; int status = 0; - const u32 *iprop; - int size; master = spi_alloc_master(&pdev->dev, sizeof(*spi)); if (master == NULL) { @@ -358,10 +356,10 @@ static int orion_spi_probe(struct platform_device *pdev) if (pdev->id != -1) master->bus_num = pdev->id; if (pdev->dev.of_node) { - iprop = of_get_property(pdev->dev.of_node, "cell-index", - &size); - if (iprop && size == sizeof(*iprop)) - master->bus_num = *iprop; + u32 cell_index; + if (!of_property_read_u32(pdev->dev.of_node, "cell-index", + &cell_index)) + master->bus_num = cell_index; } /* we support only mode 0, and no options */ -- cgit v1.2.3