From 13541226dc056fa3f54417ce12f18ba711a1591c Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 31 Aug 2017 11:06:07 -0700 Subject: ARC: reset: remove the misleading v1 suffix all over There is no plan yet to do a v2 board. And even if we were to do it only some IPs would actually change, so it be best to add suffixes at that point, not now ! Signed-off-by: Vineet Gupta Signed-off-by: Philipp Zabel --- .../devicetree/bindings/reset/snps,hsdk-reset.txt | 28 ++++++++++++++++++++++ .../bindings/reset/snps,hsdk-v1-reset.txt | 28 ---------------------- 2 files changed, 28 insertions(+), 28 deletions(-) create mode 100644 Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt delete mode 100644 Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt (limited to 'Documentation/devicetree/bindings') diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 000000000000..830069b1c37c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt deleted file mode 100644 index 6a68146ee353..000000000000 --- a/Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt +++ /dev/null @@ -1,28 +0,0 @@ -Binding for the HSDK v1 reset controller - -This binding uses the common reset binding[1]. - -[1] Documentation/devicetree/bindings/reset/reset.txt - -Required properties: -- compatible: should be "snps,hsdk-v1.0-reset". -- reg: should always contain 2 pairs address - length: first for reset - configuration register and second for corresponding SW reset and status bits - register. -- #reset-cells: from common reset binding; Should always be set to 1. - -Example: - reset: reset@880 { - compatible = "snps,hsdk-v1.0-reset"; - #reset-cells = <1>; - reg = <0x8A0 0x4>, <0xFF0 0x4>; - }; - -Specifying reset lines connected to IP modules: - ethernet@.... { - .... - resets = <&reset HSDK_V1_ETH_RESET>; - .... - }; - -The index could be found in -- cgit v1.2.3