From 899c537c25f9547a0f591ed2013be0f9f68f2df3 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:05 -0700 Subject: drm/i915: Use 64-bit division macro Since the PWM framework is switching struct pwm_state.duty_cycle's datatype to u64, prepare for this transition by using DIV_ROUND_UP_ULL to handle a 64-bit dividend. Signed-off-by: Guru Das Srinagesh Reviewed-by: Jani Nikula Acked-by: Jani Nikula Signed-off-by: Thierry Reding --- drivers/gpu/drm/i915/display/intel_panel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c index 3c5056dbf607..31cb285e8b38 100644 --- a/drivers/gpu/drm/i915/display/intel_panel.c +++ b/drivers/gpu/drm/i915/display/intel_panel.c @@ -1929,7 +1929,7 @@ static int pwm_setup_backlight(struct intel_connector *connector, return retval; } - level = DIV_ROUND_UP(pwm_get_duty_cycle(panel->backlight.pwm) * 100, + level = DIV_ROUND_UP_ULL(pwm_get_duty_cycle(panel->backlight.pwm) * 100, CRC_PMIC_PWM_PERIOD_NS); panel->backlight.level = intel_panel_compute_brightness(connector, level); -- cgit v1.2.3 From f3e4b14144a928c097e2d526f6dcd6ba0f5eba8a Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:06 -0700 Subject: hwmon: pwm-fan: Use 64-bit division macro Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using DIV_ROUND_UP_ULL to handle a 64-bit dividend. Signed-off-by: Guru Das Srinagesh Acked-by: Guenter Roeck Signed-off-by: Thierry Reding --- drivers/hwmon/pwm-fan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c index 30b7b3ea8836..17bb64299bfd 100644 --- a/drivers/hwmon/pwm-fan.c +++ b/drivers/hwmon/pwm-fan.c @@ -447,7 +447,7 @@ static int pwm_fan_resume(struct device *dev) return 0; pwm_get_args(ctx->pwm, &pargs); - duty = DIV_ROUND_UP(ctx->pwm_value * (pargs.period - 1), MAX_PWM); + duty = DIV_ROUND_UP_ULL(ctx->pwm_value * (pargs.period - 1), MAX_PWM); ret = pwm_config(ctx->pwm, duty, pargs.period); if (ret) return ret; -- cgit v1.2.3 From 5bd0b9011da836dad1a00d92ebead7eaa87f5fe3 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:08 -0700 Subject: pwm: clps711x: Use 64-bit division macro Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using DIV64_U64_ROUND_CLOSEST to handle a 64-bit divisor. Cc: Daniel Thompson Signed-off-by: Guru Das Srinagesh Signed-off-by: Thierry Reding --- drivers/pwm/pwm-clps711x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-clps711x.c b/drivers/pwm/pwm-clps711x.c index 924d39a797cf..ba9500aca078 100644 --- a/drivers/pwm/pwm-clps711x.c +++ b/drivers/pwm/pwm-clps711x.c @@ -43,7 +43,7 @@ static void clps711x_pwm_update_val(struct clps711x_chip *priv, u32 n, u32 v) static unsigned int clps711x_get_duty(struct pwm_device *pwm, unsigned int v) { /* Duty cycle 0..15 max */ - return DIV_ROUND_CLOSEST(v * 0xf, pwm->args.period); + return DIV64_U64_ROUND_CLOSEST(v * 0xf, pwm->args.period); } static int clps711x_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) -- cgit v1.2.3 From fcdea6b2a3f6508618e39e061073a18c55993a1b Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:09 -0700 Subject: pwm: imx-tpm: Use 64-bit division macro Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using DIV64_U64_ROUND_CLOSEST to handle a 64-bit divisor. Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Signed-off-by: Guru Das Srinagesh Signed-off-by: Thierry Reding --- drivers/pwm/pwm-imx-tpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c index 5f3d7f7e6aef..fcdf6befb838 100644 --- a/drivers/pwm/pwm-imx-tpm.c +++ b/drivers/pwm/pwm-imx-tpm.c @@ -124,7 +124,7 @@ static int pwm_imx_tpm_round_state(struct pwm_chip *chip, real_state->duty_cycle = state->duty_cycle; tmp = (u64)p->mod * real_state->duty_cycle; - p->val = DIV_ROUND_CLOSEST_ULL(tmp, real_state->period); + p->val = DIV64_U64_ROUND_CLOSEST(tmp, real_state->period); real_state->polarity = state->polarity; real_state->enabled = state->enabled; -- cgit v1.2.3 From 1689dcd433aaa0d32dec3fdb4bd166a0d38f4bbf Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:11 -0700 Subject: pwm: imx27: Use 64-bit division macro Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using DIV_ROUND_UP_ULL to handle a 64-bit dividend. Signed-off-by: Guru Das Srinagesh Signed-off-by: Thierry Reding --- drivers/pwm/pwm-imx27.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c index 732a6f3701e8..c50d453552bd 100644 --- a/drivers/pwm/pwm-imx27.c +++ b/drivers/pwm/pwm-imx27.c @@ -202,7 +202,7 @@ static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip, sr = readl(imx->mmio_base + MX3_PWMSR); fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr); if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) { - period_ms = DIV_ROUND_UP(pwm_get_period(pwm), + period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm), NSEC_PER_MSEC); msleep(period_ms); -- cgit v1.2.3 From 5bc5d99f1f836858820ad8e9a412bb103bb0d88b Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 15 Jun 2020 16:08:28 +0200 Subject: pwm: iqs620a: Use 64-bit division MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The PWM framework is going to change the PWM period and duty cycles to be 64-bit unsigned integers. To avoid build errors on platforms that do not natively support 64-bit division, use explicity 64-bit division. Acked-by: Uwe Kleine-König Acked-by: Lee Jones Signed-off-by: Thierry Reding --- drivers/pwm/pwm-iqs620a.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c index 674f0e238ba0..b2bb27eff623 100644 --- a/drivers/pwm/pwm-iqs620a.c +++ b/drivers/pwm/pwm-iqs620a.c @@ -46,7 +46,8 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, { struct iqs620_pwm_private *iqs620_pwm; struct iqs62x_core *iqs62x; - int duty_scale, ret; + u64 duty_scale; + int ret; if (state->polarity != PWM_POLARITY_NORMAL) return -ENOTSUPP; @@ -69,7 +70,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, * For lower duty cycles (e.g. 0), the PWM output is simply disabled to * allow an external pull-down resistor to hold the GPIO3/LTX pin low. */ - duty_scale = state->duty_cycle * 256 / IQS620_PWM_PERIOD_NS; + duty_scale = div_u64(state->duty_cycle * 256, IQS620_PWM_PERIOD_NS); mutex_lock(&iqs620_pwm->lock); @@ -81,7 +82,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, } if (duty_scale) { - u8 duty_val = min(duty_scale - 1, 0xFF); + u8 duty_val = min_t(u64, duty_scale - 1, 0xff); ret = regmap_write(iqs62x->regmap, IQS620_PWM_DUTY_CYCLE, duty_val); -- cgit v1.2.3 From 4cc23430a5361f29999545de34fc05fa7d8e513b Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:12 -0700 Subject: pwm: sifive: Use 64-bit division macro Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using DIV64_U64_ROUND_CLOSEST to handle a 64-bit divisor. Signed-off-by: Guru Das Srinagesh Acked-by: Palmer Dabbelt Signed-off-by: Thierry Reding --- drivers/pwm/pwm-sifive.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c index cc63f9baa481..62de0bb85921 100644 --- a/drivers/pwm/pwm-sifive.c +++ b/drivers/pwm/pwm-sifive.c @@ -181,7 +181,7 @@ static int pwm_sifive_apply(struct pwm_chip *chip, struct pwm_device *pwm, * consecutively */ num = (u64)duty_cycle * (1U << PWM_SIFIVE_CMPWIDTH); - frac = DIV_ROUND_CLOSEST_ULL(num, state->period); + frac = DIV64_U64_ROUND_CLOSEST(num, state->period); /* The hardware cannot generate a 100% duty cycle */ frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1); -- cgit v1.2.3 From c7dcccaec2f7e99f95ad4b7c20f4f9086c6982be Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:13 -0700 Subject: pwm: sun4i: Use nsecs_to_jiffies to avoid a division Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using nsecs_to_jiffies() which does away with the need for a division operation. Signed-off-by: Guru Das Srinagesh Acked-by: Chen-Yu Tsai Signed-off-by: Thierry Reding --- drivers/pwm/pwm-sun4i.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c index 18fbbe3277d0..961c59c99bb3 100644 --- a/drivers/pwm/pwm-sun4i.c +++ b/drivers/pwm/pwm-sun4i.c @@ -285,7 +285,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, val = (duty & PWM_DTY_MASK) | PWM_PRD(period); sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); sun4i_pwm->next_period[pwm->hwpwm] = jiffies + - usecs_to_jiffies(cstate.period / 1000 + 1); + nsecs_to_jiffies(cstate.period + 1000); if (state->polarity != PWM_POLARITY_NORMAL) ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); -- cgit v1.2.3 From 134ada17dbad272cdca57f2819a796c87e352274 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:14 -0700 Subject: backlight: pwm_bl: Use 64-bit division function Since the PWM framework is switching struct pwm_state.period's datatype to u64, prepare for this transition by using div_u64 to handle a 64-bit dividend instead of a straight division operation. Signed-off-by: Guru Das Srinagesh Reviewed-by: Daniel Thompson Acked-by: Lee Jones Signed-off-by: Thierry Reding --- drivers/video/backlight/pwm_bl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 82b8d7594701..464baade8f52 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -606,7 +606,8 @@ static int pwm_backlight_probe(struct platform_device *pdev) pb->scale = data->max_brightness; } - pb->lth_brightness = data->lth_brightness * (state.period / pb->scale); + pb->lth_brightness = data->lth_brightness * (div_u64(state.period, + pb->scale)); props.type = BACKLIGHT_RAW; props.max_brightness = data->max_brightness; -- cgit v1.2.3 From a6733474ba4bf3150120bacc1d2db446d89d3dbe Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:15 -0700 Subject: clk: pwm: Use 64-bit division function Since the PWM framework is switching struct pwm_args.period's datatype to u64, prepare for this transition by using div64_u64() to handle a 64-bit divisor. Also ensure that divide-by-zero (with fixed_rate as denominator) does not happen with an explicit check with probe failure as a consequence. Signed-off-by: Guru Das Srinagesh Acked-by: Stephen Boyd Signed-off-by: Thierry Reding --- drivers/clk/clk-pwm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/clk/clk-pwm.c b/drivers/clk/clk-pwm.c index 87fe0b0e01a3..86f2e2d3fc02 100644 --- a/drivers/clk/clk-pwm.c +++ b/drivers/clk/clk-pwm.c @@ -89,7 +89,12 @@ static int clk_pwm_probe(struct platform_device *pdev) } if (of_property_read_u32(node, "clock-frequency", &clk_pwm->fixed_rate)) - clk_pwm->fixed_rate = NSEC_PER_SEC / pargs.period; + clk_pwm->fixed_rate = div64_u64(NSEC_PER_SEC, pargs.period); + + if (!clk_pwm->fixed_rate) { + dev_err(&pdev->dev, "fixed_rate cannot be zero\n"); + return -EINVAL; + } if (pargs.period != NSEC_PER_SEC / clk_pwm->fixed_rate && pargs.period != DIV_ROUND_UP(NSEC_PER_SEC, clk_pwm->fixed_rate)) { -- cgit v1.2.3 From a9d887dc1c60ed67f2271d66560cdcf864c4a578 Mon Sep 17 00:00:00 2001 From: Guru Das Srinagesh Date: Tue, 2 Jun 2020 15:31:16 -0700 Subject: pwm: Convert period and duty cycle to u64 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Because period and duty cycle are defined as ints with units of nanoseconds, the maximum time duration that can be set is limited to ~2.147 seconds. Change their definitions to u64 in the structs of the PWM framework so that higher durations may be set. Also use the right format specifiers in debug prints in both core.c, pwm-stm32-lp.c as well as video/fbdev/ssd1307fb.c. Reported-by: kbuild test robot Signed-off-by: Guru Das Srinagesh Acked-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/core.c | 14 +++++++------- drivers/pwm/pwm-stm32-lp.c | 2 +- drivers/pwm/sysfs.c | 8 ++++---- drivers/video/fbdev/ssd1307fb.c | 2 +- include/linux/pwm.h | 12 ++++++------ 5 files changed, 19 insertions(+), 19 deletions(-) diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c index 004b2ea9b5fd..276e939a5684 100644 --- a/drivers/pwm/core.c +++ b/drivers/pwm/core.c @@ -510,12 +510,12 @@ static void pwm_apply_state_debug(struct pwm_device *pwm, last->period > s2.period && last->period <= state->period) dev_warn(chip->dev, - ".apply didn't pick the best available period (requested: %u, applied: %u, possible: %u)\n", + ".apply didn't pick the best available period (requested: %llu, applied: %llu, possible: %llu)\n", state->period, s2.period, last->period); if (state->enabled && state->period < s2.period) dev_warn(chip->dev, - ".apply is supposed to round down period (requested: %u, applied: %u)\n", + ".apply is supposed to round down period (requested: %llu, applied: %llu)\n", state->period, s2.period); if (state->enabled && @@ -524,14 +524,14 @@ static void pwm_apply_state_debug(struct pwm_device *pwm, last->duty_cycle > s2.duty_cycle && last->duty_cycle <= state->duty_cycle) dev_warn(chip->dev, - ".apply didn't pick the best available duty cycle (requested: %u/%u, applied: %u/%u, possible: %u/%u)\n", + ".apply didn't pick the best available duty cycle (requested: %llu/%llu, applied: %llu/%llu, possible: %llu/%llu)\n", state->duty_cycle, state->period, s2.duty_cycle, s2.period, last->duty_cycle, last->period); if (state->enabled && state->duty_cycle < s2.duty_cycle) dev_warn(chip->dev, - ".apply is supposed to round down duty_cycle (requested: %u/%u, applied: %u/%u)\n", + ".apply is supposed to round down duty_cycle (requested: %llu/%llu, applied: %llu/%llu)\n", state->duty_cycle, state->period, s2.duty_cycle, s2.period); @@ -558,7 +558,7 @@ static void pwm_apply_state_debug(struct pwm_device *pwm, (s1.enabled && s1.period != last->period) || (s1.enabled && s1.duty_cycle != last->duty_cycle)) { dev_err(chip->dev, - ".apply is not idempotent (ena=%d pol=%d %u/%u) -> (ena=%d pol=%d %u/%u)\n", + ".apply is not idempotent (ena=%d pol=%d %llu/%llu) -> (ena=%d pol=%d %llu/%llu)\n", s1.enabled, s1.polarity, s1.duty_cycle, s1.period, last->enabled, last->polarity, last->duty_cycle, last->period); @@ -1284,8 +1284,8 @@ static void pwm_dbg_show(struct pwm_chip *chip, struct seq_file *s) if (state.enabled) seq_puts(s, " enabled"); - seq_printf(s, " period: %u ns", state.period); - seq_printf(s, " duty: %u ns", state.duty_cycle); + seq_printf(s, " period: %llu ns", state.period); + seq_printf(s, " duty: %llu ns", state.duty_cycle); seq_printf(s, " polarity: %s", state.polarity ? "inverse" : "normal"); diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c index 67fca62524dc..134c14621ee0 100644 --- a/drivers/pwm/pwm-stm32-lp.c +++ b/drivers/pwm/pwm-stm32-lp.c @@ -61,7 +61,7 @@ static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm, do_div(div, NSEC_PER_SEC); if (!div) { /* Clock is too slow to achieve requested period. */ - dev_dbg(priv->chip.dev, "Can't reach %u ns\n", state->period); + dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period); return -EINVAL; } diff --git a/drivers/pwm/sysfs.c b/drivers/pwm/sysfs.c index 2389b8669846..449dbc0f49ed 100644 --- a/drivers/pwm/sysfs.c +++ b/drivers/pwm/sysfs.c @@ -42,7 +42,7 @@ static ssize_t period_show(struct device *child, pwm_get_state(pwm, &state); - return sprintf(buf, "%u\n", state.period); + return sprintf(buf, "%llu\n", state.period); } static ssize_t period_store(struct device *child, @@ -52,10 +52,10 @@ static ssize_t period_store(struct device *child, struct pwm_export *export = child_to_pwm_export(child); struct pwm_device *pwm = export->pwm; struct pwm_state state; - unsigned int val; + u64 val; int ret; - ret = kstrtouint(buf, 0, &val); + ret = kstrtou64(buf, 0, &val); if (ret) return ret; @@ -77,7 +77,7 @@ static ssize_t duty_cycle_show(struct device *child, pwm_get_state(pwm, &state); - return sprintf(buf, "%u\n", state.duty_cycle); + return sprintf(buf, "%llu\n", state.duty_cycle); } static ssize_t duty_cycle_store(struct device *child, diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index 8e06ba912d60..09425ec317ba 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -312,7 +312,7 @@ static int ssd1307fb_init(struct ssd1307fb_par *par) /* Enable the PWM */ pwm_enable(par->pwm); - dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n", + dev_dbg(&par->client->dev, "Using PWM%d with a %lluns period.\n", par->pwm->pwm, pwm_get_period(par->pwm)); } diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 2635b2a55090..a13ff383fa1d 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -39,7 +39,7 @@ enum pwm_polarity { * current PWM hardware state. */ struct pwm_args { - unsigned int period; + u64 period; enum pwm_polarity polarity; }; @@ -56,8 +56,8 @@ enum { * @enabled: PWM enabled status */ struct pwm_state { - unsigned int period; - unsigned int duty_cycle; + u64 period; + u64 duty_cycle; enum pwm_polarity polarity; bool enabled; }; @@ -107,13 +107,13 @@ static inline bool pwm_is_enabled(const struct pwm_device *pwm) return state.enabled; } -static inline void pwm_set_period(struct pwm_device *pwm, unsigned int period) +static inline void pwm_set_period(struct pwm_device *pwm, u64 period) { if (pwm) pwm->state.period = period; } -static inline unsigned int pwm_get_period(const struct pwm_device *pwm) +static inline u64 pwm_get_period(const struct pwm_device *pwm) { struct pwm_state state; @@ -128,7 +128,7 @@ static inline void pwm_set_duty_cycle(struct pwm_device *pwm, unsigned int duty) pwm->state.duty_cycle = duty; } -static inline unsigned int pwm_get_duty_cycle(const struct pwm_device *pwm) +static inline u64 pwm_get_duty_cycle(const struct pwm_device *pwm) { struct pwm_state state; -- cgit v1.2.3 From b8fb642afa0277a0a9072fe119c1fce18437de0d Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Mon, 15 Jun 2020 16:10:16 +0200 Subject: pwm: iqs620a: Use lowercase hexadecimal literals for consistency Other drivers use lowercase hexadecimal literals, so convert the IQS620a driver to do the same for consistency. Signed-off-by: Thierry Reding --- drivers/pwm/pwm-iqs620a.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c index b2bb27eff623..7d33e3646436 100644 --- a/drivers/pwm/pwm-iqs620a.c +++ b/drivers/pwm/pwm-iqs620a.c @@ -25,10 +25,10 @@ #include #include -#define IQS620_PWR_SETTINGS 0xD2 +#define IQS620_PWR_SETTINGS 0xd2 #define IQS620_PWR_SETTINGS_PWM_OUT BIT(7) -#define IQS620_PWM_DUTY_CYCLE 0xD8 +#define IQS620_PWM_DUTY_CYCLE 0xd8 #define IQS620_PWM_PERIOD_NS 1000000 @@ -94,7 +94,7 @@ static int iqs620_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, if (state->enabled && duty_scale) { ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS, - IQS620_PWR_SETTINGS_PWM_OUT, 0xFF); + IQS620_PWR_SETTINGS_PWM_OUT, 0xff); if (ret) goto err_mutex; } @@ -160,7 +160,7 @@ static int iqs620_pwm_notifier(struct notifier_block *notifier, ret = regmap_update_bits(iqs62x->regmap, IQS620_PWR_SETTINGS, IQS620_PWR_SETTINGS_PWM_OUT, - iqs620_pwm->out_en ? 0xFF : 0); + iqs620_pwm->out_en ? 0xff : 0); err_mutex: mutex_unlock(&iqs620_pwm->lock); -- cgit v1.2.3 From 9443f2c88ad916cad7efcd40fabc3e8c33c98594 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 29 Jun 2020 13:47:49 +0100 Subject: pwm: bcm-iproc: Remove impossible comparison when validating duty cycle 'duty' here is an unsigned int, thus checking for <0 will always evaluate to false. Fixes the following W=1 warning: drivers/pwm/pwm-bcm-iproc.c:147:12: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Cc: Ray Jui Cc: Scott Branden Cc: Yendapally Reddy Dhananjaya Reddy Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-pwm@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Thierry Reding --- drivers/pwm/pwm-bcm-iproc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c index 1f829edd8ee7..46f0a45e9049 100644 --- a/drivers/pwm/pwm-bcm-iproc.c +++ b/drivers/pwm/pwm-bcm-iproc.c @@ -143,8 +143,7 @@ static int iproc_pwmc_apply(struct pwm_chip *chip, struct pwm_device *pwm, value = rate * state->duty_cycle; duty = div64_u64(value, div); - if (period < IPROC_PWM_PERIOD_MIN || - duty < IPROC_PWM_DUTY_CYCLE_MIN) + if (period < IPROC_PWM_PERIOD_MIN) return -EINVAL; if (period <= IPROC_PWM_PERIOD_MAX && -- cgit v1.2.3 From 75de72591aa8ffa3acdc14cc1d3708ce8ac09245 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 29 Jun 2020 13:47:50 +0100 Subject: pwm: bcm-kona: Remove impossible comparison when validating duty cycle 'dc' here is an unsigned long, thus checking for <0 will always evaluate to false. Fixes the following W=1 warning: drivers/pwm/pwm-bcm-kona.c:141:35: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] Cc: Florian Fainelli Cc: Ray Jui Cc: Scott Branden Cc: bcm-kernel-feedback-list@broadcom.com Cc: linux-pwm@vger.kernel.org Signed-off-by: Lee Jones Signed-off-by: Thierry Reding --- drivers/pwm/pwm-bcm-kona.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c index 81da91df2529..16c5898b934a 100644 --- a/drivers/pwm/pwm-bcm-kona.c +++ b/drivers/pwm/pwm-bcm-kona.c @@ -138,7 +138,7 @@ static int kona_pwmc_config(struct pwm_chip *chip, struct pwm_device *pwm, dc = div64_u64(val, div); /* If duty_ns or period_ns are not achievable then return */ - if (pc < PERIOD_COUNT_MIN || dc < DUTY_CYCLE_HIGH_MIN) + if (pc < PERIOD_COUNT_MIN) return -EINVAL; /* If pc and dc are in bounds, the calculation is done */ -- cgit v1.2.3 From fc810e7c7918416668d8801593c3e108db2da3d4 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 29 Jun 2020 13:47:51 +0100 Subject: pwm: mediatek: Provide missing kerneldoc description for 'soc' arg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Kerneldoc syntax is used, but not complete. Descriptions are required for all arguments. Fixes the following W=1 build warning: drivers/pwm/pwm-mediatek.c:57: warning: Function parameter or member 'soc' not described in 'pwm_mediatek_chip' Cc: Matthias Brugger Cc: John Crispin Cc: Zhi Mao Cc: linux-pwm@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones Acked-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-mediatek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c index b94e0d09c300..ab001ce55178 100644 --- a/drivers/pwm/pwm-mediatek.c +++ b/drivers/pwm/pwm-mediatek.c @@ -46,6 +46,7 @@ struct pwm_mediatek_of_data { * @clk_main: the clock used by PWM core * @clk_pwms: the clock used by each PWM channel * @clk_freq: the fix clock frequency of legacy MIPS SoC + * @soc: pointer to chip's platform data */ struct pwm_mediatek_chip { struct pwm_chip chip; -- cgit v1.2.3 From dfd9b6154d5df4160f2c196d54dcf9223a7df959 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 29 Jun 2020 13:47:52 +0100 Subject: pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header Argument descriptions must be prepended with a '@' to be understood by the kerneldoc tooling/parsers/validators. Fixes the following W=1 warning: drivers/pwm/pwm-omap-dmtimer.c:70: warning: Function parameter or member 'dm_timer_pdev' not described in 'pwm_omap_dmtimer_chip' Cc: Tony Lindgren Cc: Joachim Eastwood Cc: NeilBrown Cc: Grant Erickson Signed-off-by: Lee Jones Signed-off-by: Thierry Reding --- drivers/pwm/pwm-omap-dmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c index 0d31833db2e2..75cea7f2aff5 100644 --- a/drivers/pwm/pwm-omap-dmtimer.c +++ b/drivers/pwm/pwm-omap-dmtimer.c @@ -58,7 +58,7 @@ * @mutex: Mutex to protect pwm apply state * @dm_timer: Pointer to omap dm timer. * @pdata: Pointer to omap dm timer ops. - * dm_timer_pdev: Pointer to omap dm timer platform device + * @dm_timer_pdev: Pointer to omap dm timer platform device */ struct pwm_omap_dmtimer_chip { struct pwm_chip chip; -- cgit v1.2.3 From 216a094de2521099e4ae04c5d07d8603ef9b24f1 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Wed, 8 Jul 2020 19:59:24 +0200 Subject: pwm: Replace HTTP links with HTTPS ones MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Acked-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-omap-dmtimer.c | 2 +- drivers/pwm/pwm-tiecap.c | 2 +- drivers/pwm/pwm-tiehrpwm.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c index 75cea7f2aff5..358db4ff9d4f 100644 --- a/drivers/pwm/pwm-omap-dmtimer.c +++ b/drivers/pwm/pwm-omap-dmtimer.c @@ -14,7 +14,7 @@ * with a timer counter that goes up. When it overflows it gets * reloaded with the load value and the pwm output goes up. * When counter matches with match register, the output goes down. - * Reference Manual: http://www.ti.com/lit/ug/spruh73q/spruh73q.pdf + * Reference Manual: https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf * * Limitations: * - When PWM is stopped, timer counter gets stopped immediately. This diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index ab38c8203b79..683804c7d26c 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -2,7 +2,7 @@ /* * ECAP PWM driver * - * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/ */ #include diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index 7b4c770ce9d6..0846917ff2d2 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -2,7 +2,7 @@ /* * EHRPWM PWM driver * - * Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/ + * Copyright (C) 2012 Texas Instruments, Inc. - https://www.ti.com/ */ #include -- cgit v1.2.3 From 6ced5ff0be8e94871ba846dfbddf69d21363f3d7 Mon Sep 17 00:00:00 2001 From: Rayagonda Kokatanur Date: Fri, 17 Jul 2020 21:46:06 -0700 Subject: pwm: bcm-iproc: handle clk_get_rate() return MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Handle clk_get_rate() returning 0 to avoid possible division by zero. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Rayagonda Kokatanur Signed-off-by: Scott Branden Reviewed-by: Ray Jui Reviewed-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- drivers/pwm/pwm-bcm-iproc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c index 46f0a45e9049..79b1e58e946d 100644 --- a/drivers/pwm/pwm-bcm-iproc.c +++ b/drivers/pwm/pwm-bcm-iproc.c @@ -85,8 +85,6 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm, u64 tmp, multi, rate; u32 value, prescale; - rate = clk_get_rate(ip->clk); - value = readl(ip->base + IPROC_PWM_CTRL_OFFSET); if (value & BIT(IPROC_PWM_CTRL_EN_SHIFT(pwm->hwpwm))) @@ -99,6 +97,13 @@ static void iproc_pwmc_get_state(struct pwm_chip *chip, struct pwm_device *pwm, else state->polarity = PWM_POLARITY_INVERSED; + rate = clk_get_rate(ip->clk); + if (rate == 0) { + state->period = 0; + state->duty_cycle = 0; + return; + } + value = readl(ip->base + IPROC_PWM_PRESCALE_OFFSET); prescale = value >> IPROC_PWM_PRESCALE_SHIFT(pwm->hwpwm); prescale &= IPROC_PWM_PRESCALE_MAX; -- cgit v1.2.3